summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2013-12-16Merge tag 'v3.10.24' into HEADAjay Nandakumar
This is the 3.10.24 stable release Change-Id: Ibd2734f93d44385ab86867272a1359158635133b
2013-12-11USB: spcp8x5: correct handling of CS5 settingColin Leitner
commit 711fbdfbf2bc4827214a650afe3f64767a1aba16 upstream. This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11USB: mos7840: correct handling of CS5 settingColin Leitner
commit 78692cc3382e0603a47e1f2aaeffe0d99891994d upstream. This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11USB: ftdi_sio: fixed handling of unsupported CSIZE settingColin Leitner
commit 8704211f65a2106ba01b6ac9727cdaf9ca11594c upstream. FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would only report this limitation for CS6 to dmesg and fail to reflect this fact to tcgetattr. This patch reverts the unsupported CSIZE setting and reports the fact with less severance to dmesg for both CS5 and CS6. To test the patch it's sufficient to call stty -F /dev/ttyUSB0 cs5 which will succeed without the patch and report an error with the patch applied. As an additional fix this patch ensures that the control request will always include a data bit size. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11USB: pl2303: fixed handling of CS5 settingColin Leitner
commit a313249937820f8b1996133fc285efbd6aad2c5b upstream. This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a value of 0 and the CSIZE setting has been skipped altogether by the enclosing if. Tested on 3.11.6 and the scope shows the correct output after the fix has been applied. Tagged to be added to stable, because it fixes a user visible driver bug and is simple enough to backport easily. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29USB: mos7840: fix tiocmget error handlingJohan Hovold
commit a91ccd26e75235d86248d018fe3779732bcafd8d upstream. Make sure to return errors from tiocmget rather than rely on uninitialised stack data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20USB: add new zte 3g-dongle's pid to option.cRui li
commit 0636fc507a976cdc40f21bdbcce6f0b98ff1dfe9 upstream. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко
commit e1466ad5b1aeda303f9282463d55798d2eda218c upstream. Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13USB: support new huawei devices in option.cFangxiaozhi (Franko)
commit d544db293a44a2a3b09feab7dbd59668b692de71 upstream. Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceSubClass value. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04usb: serial: option: blacklist Olivetti Olicard200Enrico Mioso
commit fd8573f5828873343903215f203f14dc82de397c upstream. Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04USB: serial: option: add support for Inovia SEW858 deviceGreg Kroah-Hartman
commit f4c19b8e165cff1a6607c21f8809441d61cab7ec upstream. This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko <ra85551@gmail.com> Tested-by: Pavel Parkhomenko <ra85551@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as ↵Diego Elio Pettenò
well. commit c9d09dc7ad106492c17c587b6eeb99fe3f43e522 upstream. Without this change, the USB cable for Freestyle Option and compatible glucometers will not be detected by the driver. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-31Merge tag 'v3.10.17' into dev-kernel-3.10Ajay Nandakumar
This is the 3.10.17 stable release Conflicts: drivers/usb/host/xhci.c Change-Id: I6bd3b15ff92a0b94568b9d02e9bb1036becfca20
2013-10-13USB: serial: option: Ignore card reader interface on Huawei E1750Michal Malý
commit eb2addd4044b4b2ce77693bde5bc810536dd96ee upstream. Hi, my Huawei 3G modem has an embedded Smart Card reader which causes trouble when the modem is being detected (a bunch of "<warn> (ttyUSBx): open blocked by driver for more than 7 seconds!" in messages.log). This trivial patch corrects the problem for me. The modem identifies itself as "12d1:1406 Huawei Technologies Co., Ltd. E1750" in lsusb although the description on the body says "Model E173u-1" Signed-off-by: Michal Malý <madcatxster@prifuk.cz> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03usb: serial: baseband: fix compile warningPhilip Rakity
use flush_work rather then flush_work_sync code is the same .. see workqueue.h Change-Id: I5d198759e614d68411d9ed7315ff695112dd7f98 Signed-off-by: Philip Rakity <prakity@nvidia.com> Reviewed-on: http://git-master/r/272033 Reviewed-by: Vinayak Pane <vpane@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> (cherry picked from commit 3cd5d04255b009228d9b667b06adcfc7849839f2) Signed-off-by: Ajay Nandakumar <anandakumarm@nvidia.com>
2013-09-26USB: mos7720: fix big-endian control requestsJohan Hovold
commit 3b716caf190ccc6f2a09387210e0e6a26c1d81a4 upstream. Fix endianess bugs in parallel-port code which caused corrupt control-requests to be issued on big-endian machines. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26USB: mos7720: use GFP_ATOMIC under spinlockDan Carpenter
commit d0bd9a41186e076ea543c397ad8a67a6cf604b55 upstream. The write_parport_reg_nonblock() function shouldn't sleep because it's called with spinlocks held. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14usb/serial: Add GCOV_PROFILEKonsta Holtta
Include usb/serial in GCOV profiling when enabled by defconfig. Change-Id: I479901b243c4efb245ee7ac7fae47dceb53ec2c7 Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: http://git-master/r/190004 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
2013-09-14usb: serial: baseband: buffer allocations at initVinayak Pane
The usb transaction buffers are allocated in module init. In device open, close and disconnect the buffers will not be freed. Instead they will be reused to avoid allocation failure in low-mem conditions. The usb driver register moved to init so that rmmod and insmod is not required. Bug 956211 Signed-off-by: Vinayak Pane <vpane@nvidia.com> Reviewed-on: http://git-master/r/109935 (cherry picked from commit a4e8219a86f80fd06aaaae2c40a657098d5dcfa5) Change-Id: Id88cfe3b0a75cb2e6f39176b5297f81f4f9e978b Reviewed-on: http://git-master/r/115609 Tested-by: Vinayak Pane <vpane@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Steve Lin <stlin@nvidia.com> Rebase-Id: R1fe1602c604a4339bd845677cd87db4966a1ff31
2013-09-14usb: serial: baseband: Add another XMM modem USB VID/PID.Michael Hsu
Add support for another XMM modem. Bug 996038 Change-Id: I392a18284b372fbc80c581b31b21af3c072bf4d3 Signed-off-by: Michael Hsu <mhsu@nvidia.com> Reviewed-on: http://git-master/r/110193 (cherry picked from commit bdad2e9c1b195c8f7fcc3216f2bf27ea99dfd597) Reviewed-on: http://git-master/r/110941 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Vinayak Pane <vpane@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Steve Lin <stlin@nvidia.com> Rebase-Id: Re5159647fa22ebf4d48c2abf8a2a1d8672ffc426
2013-09-14usb: serial: baseband_usb_chr kernel panicpyu
Two threads race for two resources when baseband_usb_close() get called from a user process Bug 988188 Change-Id: Ic962640b6414e576d34b7ff6870b21b644837434 Signed-off-by: pyu <pyu@nvidia.com> Reviewed-on: http://git-master/r/107088 GVS: Gerrit_Virtual_Submit Reviewed-by: Vinayak Pane <vpane@nvidia.com> Reviewed-by: Steve Lin <stlin@nvidia.com> Rebase-Id: R0eb1d385e29f1c439be87ee4f08192d165f9f648
2013-09-14usb: serial: baseband: Restructure open and closeVinayak Pane
This commit reorganizes the usb chr driver for (1) Application does not have to rmmod & insmod (2) Application recovery mechanism to restart download (3) Change memory allocation policy to accommodate in low-mem situations. (4) Avoid kernel panic when module is not removed Bug 947621 Bug 956211 Reviewed-on: http://git-master/r/91373 (cherry picked from commit bb5a148979a92191e0dfb4d97d4942f877f18309) Change-Id: I2679d1d5f94cfe6e7dc98df0026f64cab703fe5c Signed-off-by: Vinayak Pane <vpane@nvidia.com> Reviewed-on: http://git-master/r/96334 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Steve Lin <stlin@nvidia.com> Rebase-Id: Re64f9a8159defc4836982f23ad702af2485af126
2013-09-14arm: tegra: comms: fix crash at dev attr changeVinayak Pane
Check the state machine before poweron the modem by device attribute change routine. Maintain the state machine to avoid crash after writing state change to /sys/devices/platform/baseband_xmm_power/xmm_onoff Also cancel workqueue at module unload to avoid possible crash. Bug 898008 Reviewed-on: http://git-master/r/72934 Change-Id: I0d8286774040f155c930ecb0bb69778de6c606ac Signed-off-by: Vinayak Pane <vpane@nvidia.com> Signed-off-by: Varun Wadekar <vwadekar@nvidia.com> Reviewed-on: http://git-master/r/77744 Reviewed-by: Automatic_Commit_Validation_User Rebase-Id: Reaea4fbd585c3f1cce910997ea17c7d8bfb544aa
2013-09-14arm: tegra: comms: handle usb disconnectionSeshendra Gadagottu
Flushing pending urb requests on disconnection. Blocks usb requests on usb device disconnection. BUG 919270 Reviewed-on: http://git-master/r/72832 Change-Id: I9ae10685d9517e0626338cfd42b21479d7d480eb Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com> Signed-off-by: Varun Wadekar <vwadekar@nvidia.com> Reviewed-on: http://git-master/r/77760 Reviewed-by: Automatic_Commit_Validation_User Rebase-Id: R92277919fb234b5f5bf90b8e5b503bb5c3204fb6
2013-09-14arm: tegra: comms: Fix race condition in probe function.Michael Hsu
XMM modem baseband character driver, which is used to download modem software, had race condition. If USB host stack has not enumerated XMM modem boot rom yet, then driver aborts module load. With this change, I/O (such as downloading modem software) will be delayed until USB host stack has enumerated modem boot rom. BUG 828389 Reviewed-on: http://git-master/r/58870 (cherry picked from commit 22a5122689ab957fd0236cf2fcf1623dac82ab69) Change-Id: Ib858363b11ea41d40218ed9ed044012421209371 Reviewed-on: http://git-master/r/62734 Reviewed-by: Varun Colbert <vcolbert@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com> Rebase-Id: Re7857218c723d3c43072f17ccf5ffc70a7faf163
2013-09-14arm: tegra: comms: Add baseband character driver.Michael Hsu
Add raw character device driver for baseband modems. Suitable for downloading modem software image to flashless modem, or sending AT modem commands after modem software is running. Original-Change-Id: I0de126c5eb8700db196e9d6838d65ccce1480c42 Reviewed-on: http://git-master/r/40936 Reviewed-by: Michael Hsu <mhsu@nvidia.com> Tested-by: Michael Hsu <mhsu@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Rebase-Id: R76607c0d7b47938fa49d4ec57e9962f2d683a5cb
2013-08-20USB-Serial: Fix error handling of usb_wwanMatt Burtch
commit 6c1ee66a0b2bdbd64c078fba684d640cf2fd38a9 upstream. This fixes an issue where the bulk-in urb used for incoming data transfer is not resubmitted if the packet recieved contains an error status. This results in the driver locking until the port is closed and re-opened. Tested on a custom board with a Cinterion GSM module. Signed-off-by: Matt Burtch <matt@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20USB: keyspan: fix null-deref at disconnect and releaseJohan Hovold
commit ff8a43c10f1440f07a5faca0c1556921259f7f76 upstream. Make sure to fail properly if the device is not accepted during attach in order to avoid null-pointer derefs (of missing interface private data) at disconnect or release. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20USB: mos7720: fix broken control requestsJohan Hovold
commit ef6c8c1d733e244f0499035be0dabe1f4ed98c6f upstream. The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20USB: mos7840: fix big-endian probeJohan Hovold
commit d551ec9b690f3de65b0091a2e767f1382adc792d upstream. Fix bug in device-type detection on big-endian machines originally introduced by commit 0eafe4de ("USB: serial: mos7840: add support for MCS7810 devices") which always matched on little-endian product ids. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20USB: ti_usb_3410_5052: fix big-endian firmware handlingJohan Hovold
commit e877dd2f2581628b7119df707d4cf03d940cff49 upstream. Fix endianess bugs in firmware handling introduced by commits cb7a7c6a ("ti_usb_3410_5052: add Multi-Tech modem support") and 05a3d905 ("ti_usb_3410_5052: support alternate firmware") which made the driver use the wrong firmware for certain devices on big-endian machines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11USB: mos7840: fix pointer castsJohan Hovold
commit 683a0e4d7971c3186dc4d429027debfe309129aa upstream. Silence compiler warnings on 64-bit systems introduced by commit 05cf0dec ("USB: mos7840: fix race in led handling") which uses the usb-serial data pointer to temporarily store the device type during probe but failed to add the required casts. [gregkh - change uintptr_t to unsigned long] Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11USB: mos7840: fix race in led handlingJohan Hovold
commit 05cf0dec5ccc696a7636c84b265b477173498156 upstream. Fix race in LED handling introduced by commit 0eafe4de ("USB: serial: mos7840: add support for MCS7810 devices") which reused the port control urb for manipulating the LED without making sure that the urb is not already in use. This could lead to the control urb being manipulated while in flight. Fix by adding a dedicated LED urb and ctrlrequest along with a LED-busy flag to handle concurrency. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11USB: mos7840: fix device-type detectionJohan Hovold
commit 40c24f2893ba0ba7df485871f6aac0c197ceef5b upstream. Fix race in device-type detection introduced by commit 0eafe4de ("USB: serial: mos7840: add support for MCS7810 devices") which used a static variable to hold the device type. Move type detection to probe and use serial data to store the device type. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11USB: mos7840: fix race in register handlingJohan Hovold
commit d8a083cc746664916d9d36ed9e4d08a29525f245 upstream. Fix race in mos7840_get_reg which unconditionally manipulated the control urb (which may already be in use) by adding a control-urb busy flag. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04USB: serial: ftdi_sio: add more RT Systems ftdi devicesRick Farina (Zero_Chaos)
commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream. RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04USB: ti_usb_3410_5052: fix dynamic-id matchingJohan Hovold
commit 1fad56424f5ad3ce4973505a357212b2e2282b3f upstream. The driver failed to take the dynamic ids into account when determining the device type and therefore all devices were detected as 2-port devices when using the dynamic-id interface. Match on the usb-serial-driver field instead of doing redundant id-table searches. Reported-by: Anders Hammarquist <iko@iko.pp.se> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04USB: mos7840: fix memory leak in openJohan Hovold
commit 5f8a2e68b679b41cc8e9b642f2f5aa45dd678641 upstream. Allocated urbs and buffers were never freed on errors in open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: cp210x support SEL C662 Vendor/DeviceBarry Grussling
commit b579fa52f6be0b4157ca9cc5e94d44a2c89a7e95 upstream. This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28USB: cp210x: add MMB and PI ZigBee USB Device SupportSami Rahman
commit 7681156982026ebf7eafd7301eb0374d7648d068 upstream. Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5. Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com> Tested-by: Sami Rahman <sami.rahman@mmbresearch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapterLuiz Angelo Daros de Luca
commit 90625070c4253377025878c4e82feed8b35c7116 upstream. This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: Add ONYX 3G device supportEnrico Mioso
commit 63b5df963f52ccbab6fabedf05b7ac6b465789a4 upstream. This patch adds support for the ONYX 3G device (version 1) from ALFA NETWORK. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28USB: option: add D-Link DWM-152/C1 and DWM-156/C1Alexandr \\\"Sky\\\" Ivanov
commit ca24763588844b14f019ffc45c7df6d9e8f932c5 upstream. Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices. DWM-152/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e01 Rev= 0.00 S: Product=USB Configuration S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms DWM-156/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e02 Rev= 0.00 S: Product=DataCard Device S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28USB: option: append Petatel NP10T device to GSM modems listDaniil Bolsun
commit c38e83b6cc2adf80e3f091fd92cfbeacc9748347 upstream. This patch was tested on 3.10.1 kernel. Same models of Petatel NP10T modems have different device IDs. Unfortunately they have no additional revision information on a board which may treat them as different devices. Currently I've seen only two NP10T devices with various IDs. Possibly Petatel NP10T list will be appended upon devices with new IDs will appear. Signed-off-by: Daniil Bolsun <dan.bolsun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option.c: remove ONDA MT825UP product ID fromdriverEnrico Mioso
commit 878c69aae986ae97084458c0183a8c0a059865b1 upstream. Some (very few) early devices like mine, where not exposting a proper CDC descriptor. This was fixed with an immediate firmware update from the vendor, and pre-installed on newer devices. So actual devices can be driven by cdc_acm.c + cdc_ether.c. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: add Olivetti Olicard 200Dan Williams
commit 4cf76df06ecc852633ed927d91e01c83c33bc331 upstream. Speaks AT on interfaces 5 (command & PPP) and 3 (secondary), other interface protocols are unknown. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: option: add TP-LINK MA260Bjørn Mork
commit 94190301ffa059c2d127b3a67ec5d161d5c62681 upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: blacklist ONDA MT689DC QMI interfaceEnrico Mioso
commit 3d1a69e726406ab662ab88fa30a3a05ed404334d upstream. Prevent the option driver from binding itself to the QMI/WWAN interface, making it unusable by the proper driver. Signed-off-by: enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21USB: option,qcserial: move Novatel Gobi1K IDs to qcserialDan Williams
commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream. These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-19USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cableAnders Hammarquist
Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist <iko@iko.pp.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-22 08:12:58 +0000