summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2009-01-05add a vfs_fsync helperChristoph Hellwig
Fsync currently has a fdatawrite/fdatawait pair around the method call, and a mutex_lock/unlock of the inode mutex. All callers of fsync have to duplicate this, but we have a few and most of them don't quite get it right. This patch adds a new vfs_fsync that takes care of this. It's a little more complicated as usual as ->fsync might get a NULL file pointer and just a dentry from nfsd, but otherwise gets afile and we want to take the mapping and file operations from it when it is there. Notes on the fsync callers: - ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the lower file - coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host file, and returning 0 when ->fsync was missing - shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor taking i_mutex. Now given that shared memory doesn't have disk backing not doing anything in fsync seems fine and I left it out of the vfs_fsync conversion for now, but in that case we might just not pass it through to the lower file at all but just call the no-op simple_sync_file directly. [and now actually export vfs_fsync] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05zero i_uid/i_gid on inode allocationAl Viro
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-02Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (31 commits) uwb: remove beacon cache entry after calling uwb_notify() uwb: remove unused include/linux/uwb/debug.h uwb: use print_hex_dump() uwb: use dev_dbg() for debug messages uwb: fix memory leak in uwb_rc_notif() wusb: fix oops when terminating a non-existant reservation uwb: fix oops when terminating an already terminated reservation uwb: improved MAS allocator and reservation conflict handling wusb: add debug files for ASL, PZL and DI to the whci-hcd driver uwb: fix oops in debug PAL's reservation callback uwb: clean up whci_wait_for() timeout error message wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive uwb: remove unused beacon group join/leave events wlp: start/stop radio on network interface up/down uwb: add basic radio manager uwb: add pal parameter to new reservation callback uwb: fix races between events and neh timers uwb: don't unbind the radio controller driver when resetting uwb: per-radio controller event thread and beacon cache uwb: add commands to add/remove IEs to the debug interface ...
2009-01-02tty: Drop the lock_kernel in the private ioctl hookAlan Cox
We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: USB tty devices can block in tcdrain when unpluggedAlan Cox
The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Add device function for USB serial consoleKevin Hao
Add device funtion for usb serial console, so we can open /dev/console when we use a usb serial device as console. (Typecast removed as noted by Sergei Shtylyov) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Fix close races in USB serialAlan Cox
USB serial has always had races where the tty port usage count can hit zero during a receive event. The internal locking is a mutex so we can't use that in the IRQ handlers. With krefs we can tackle this differently but we still need to be careful. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02sierra: Fix formattingAlan Cox
Andrew Morton wrote: in drivers/usb/serial/sierra.c: } else { if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); it's missing a tab. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'master' of ↵David Vrabel
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream Conflicts: drivers/uwb/wlp/eda.c
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (105 commits) SELinux: don't check permissions for kernel mounts security: pass mount flags to security_sb_kern_mount() SELinux: correctly detect proc filesystems of the form "proc/foo" Audit: Log TIOCSTI user namespaces: document CFS behavior user namespaces: require cap_set{ug}id for CLONE_NEWUSER user namespaces: let user_ns be cloned with fairsched CRED: fix sparse warnings User namespaces: use the current_user_ns() macro User namespaces: set of cleanups (v2) nfsctl: add headers for credentials coda: fix creds reference capabilities: define get_vfs_caps_from_disk when file caps are not enabled CRED: Allow kernel services to override LSM settings for task actions CRED: Add a kernel_service object class to SELinux CRED: Differentiate objective and effective subjective credentials on a task CRED: Documentation CRED: Use creds in file structs CRED: Prettify commoncap.c CRED: Make execve() take advantage of copy-on-write credentials ...
2008-12-25Merge branch 'next' into for-linusJames Morris
2008-12-22uwb: use print_hex_dump()David Vrabel
Use print_hex_dump() instead of the home-grown dump_bytes(). Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22uwb: use dev_dbg() for debug messagesDavid Vrabel
Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros, use dev_dbg() or remove the message entirely. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22usb: Fix up sh_mobile usbf clock framework warnings.Paul Mundt
drivers/usb/gadget/m66592-udc.c: In function 'm66592_probe': drivers/usb/gadget/m66592-udc.c:1672: warning: label 'clean_up2' defined but not used drivers/usb/host/r8a66597-hcd.c: In function 'r8a66597_probe': drivers/usb/host/r8a66597-hcd.c:2401: warning: label 'clean_up2' defined but not used Added by commit 985fc7c81c7852f2e104c71cbe913ace683c9e6a ("sh: sh_mobile usbf clock framework support"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile usb clock framework supportMagnus Damm
Add clock framework support to the usb/r8a66597 driver and adjust the cpu specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile usbf clock framework supportMagnus Damm
Add clock framework support to the usbf/m66592 driver and adjust the cpu specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-17Phonet: USB CDC Phonet function for gadget frameworkRémi Denis-Courmont
This implements the Nokia vendor-specific communication device class function to exchange Phonet messages over USB. This function is already found in the "PC suite" USB profile of (non-Linux) Nokia handsets. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: add 5372:2303 to pl2303Matthew Arnold
This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: skip Set-Interface(0) if already in altsetting 0Alan Stern
When a driver unbinds from an interface, usbcore always sends a Set-Interface request to reinstall altsetting 0. Unforunately, quite a few devices have buggy firmware that crashes when it receives this request. To avoid such problems, this patch (as1180) arranges to send the Set-Interface request only when the interface is not already in altsetting 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: gadget: fix rndis working at high speedDavid Brownell
Fix a bug specific to highspeed mode in the recently updated RNDIS support: it wasn't setting up the high speed notification endpoint, which prevented high speed RNDIS links from working. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert
The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: tty: SprogII DCC controller identifiersAlan Cox
Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17usb-storage: update unusual_devs entry for Nokia 5310Alan Stern
This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: Unusual devs patch for Nokia 3500cOzan Sener
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: storage: unusual_devs.h: Nokia 3109c additionCSÉCSY László
2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: fix problem with usbtmc driver not loading properlyGreg Kroah-Hartman
The usbtmc driver forgot to export its device table to userspace. Without this, it is never loaded properly when such a device is seen by the system. Cc: Marcel Janssen <marcel.janssen@admesy.nl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/ich8lan.c
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-12wusb: fix oops when terminating a non-existant reservationDavid Vrabel
If a reservation was not established, do not try terminating it. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-12uwb: improved MAS allocator and reservation conflict handlingStefano Panella
Greatly enhance the MAS allocator: - Handle row and column reservations. - Permit all the available MAS to be allocated. - Follows the WiMedia rules on MAS selection. Take appropriate action when reservation conflicts are detected. - Correctly identify which reservation wins the conflict. - Protect alien BP reservations. - If an owned reservation loses, resize/move it. - Follow the backoff procedure before requesting additional MAS. When reservations are terminated, move the remaining reservations (if necessary) so they keep following the MAS allocation rules. Signed-off-by: Stefano Panella <stefano.panella@csr.com> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-10ARM: OMAP: Switch ohci-omap to gpio_request/free callsJarkko Nikula
Switch to gpio_request/free calls Cc: linux-usb@vger.kernel.org Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_inputDavid Brownell
More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-08Merge branch 'master' of ↵David Vrabel
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
2008-12-05Fix incorrect use of loose in tty/serial driversNick Andrew
[Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-04[ARM] Orion: add the option to support different ehci phy initializationRonen Shitrit
The Orion ehci driver serves the Orion, kirkwood and DD Soc families. Since each of those integrate a different USB phy we should have the ability to use few initialization sequences or to leave the boot loader phy settings as is. Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
2008-12-04Merge branch 'master' into nextJames Morris
Conflicts: fs/nfsd/nfs4recover.c Manually fixed above to use new creds API functions, e.g. nfs4_save_creds(). Signed-off-by: James Morris <jmorris@namei.org>
2008-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c drivers/net/smc91x.c
2008-12-01Add kref to fake tty used by USB consoleKevin Hao
We alloc a fake tty in usb serial console setup function. we should init the tty's kref otherwise we will face WARN_ON after following invoke of tty_port_tty_set --> tty_kref_get. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30USB: serial: add more Onda device ids to option driverGreg Kroah-Hartman
Thanks to Domenico Riccio for pointing these out. Cc: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: usb-storage: unusual_devs entry for Nikon D2HTobias Kunze Briseño
This patch adds an unusual_devs entry for the Nikon D2H camera. From: Tobias Kunze Briseño <t@fictive.com>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: storage: unusual_devs entry for Mio C520-GPSAlan Stern
This patch (as1176) adds an unusual_devs entry for the Mio C520 GPS unit. Other devices also based on the Mitac hardware use the same USB interface firmware, so the Vendor and Product names are generalized. This fixes Bugzilla #11583. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Tamas Kerecsen <kerecsen@bigfoot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: fsl_usb2_udc: Report disconnect before unbindingAnton Vorontsov
Gadgets disable endpoints in their disconnect callbacks, so we must call disconnect before unbinding. The patch fixes following badness: root@b1:~# insmod fsl_usb2_udc.ko Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007) root@b1:~# insmod g_ether.ko g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC 26:07:ba:c0:44:33 usb0: HOST MAC 96:81:0c:05:4d:e3 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready fsl-usb2-udc: bind to driver g_ether g_ether gadget: high speed config #1: CDC Ethernet (ECM) root@b1:~# rmmod g_ether.ko ------------[ cut here ]------------ Badness at drivers/usb/gadget/composite.c:871 [...] NIP [e10c3454] composite_unbind+0x24/0x15c [g_ether] LR [e10aa454] usb_gadget_unregister_driver+0x13c/0x164 [fsl_usb2_udc] Call Trace: [df145e80] [ffffff94] 0xffffff94 (unreliable) [df145eb0] [e10aa454] usb_gadget_unregister_driver+0x13c/0x164 [fsl_usb2_udc] [df145ed0] [e10c4c40] usb_composite_unregister+0x3c/0x4c [g_ether] [df145ee0] [c006bcc0] sys_delete_module+0x130/0x19c [df145f40] [c00142d8] ret_from_syscall+0x0/0x38 [...] unregistered gadget driver 'g_ether' Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: fsl_qe_udc: Report disconnect before unbindingAnton Vorontsov
Gadgets disable endpoints in their disconnect callbacks, so we must call disconnect before unbinding. This also fixes muram memory leak, since we free muram in the qe_ep_disable(). But mainly the patch fixes following badness: root@b1:~# insmod fsl_qe_udc.ko fsl_qe_udc: Freescale QE/CPM USB Device Controller driver, 1.0 fsl_qe_udc e01006c0.usb: QE USB controller initialized as device root@b1:~# insmod g_ether.ko g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC be:2d:3c:fa:be:f0 usb0: HOST MAC 62:b8:6a:df:38:66 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready fsl_qe_udc e01006c0.usb: fsl_qe_udc bind to driver g_ether g_ether gadget: high speed config #1: CDC Ethernet (ECM) root@b1:~# rmmod g_ether.ko ------------[ cut here ]------------ Badness at drivers/usb/gadget/composite.c:871 [...] NIP [d10c1374] composite_unbind+0x24/0x15c [g_ether] LR [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] Call Trace: [cfb93e80] [cfb1f3a0] 0xcfb1f3a0 (unreliable) [cfb93eb0] [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] [cfb93ed0] [d10c2a3c] usb_composite_unregister+0x3c/0x4c [g_ether] [cfb93ee0] [c006bde0] sys_delete_module+0x130/0x19c [cfb93f40] [c00142d8] ret_from_syscall+0x0/0x38 [...] fsl_qe_udc e01006c0.usb: unregistered gadget driver 'g_ether' Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: fix SB600 USB subsystem hang bugShane Huang
This patch is required for all AMD SB600 revisions to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. Reported in bugzilla as #11599, the similar patch for SB700 old revision is: commit b09bc6cbae4dd3a2d35722668ef2c502a7b8b093 Reported-by: raffaele <ralfconn@tele2.it> Tested-by: Roman Mamedov <roman@rm.pp.ru> Signed-off-by: Shane Huang <shane.huang@amd.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30Revert "USB: improve ehci_watchdog's side effect in CPU power management"Greg Kroah-Hartman
This reverts commit f0d781d59cb621e1795d510039df973d0f8b23fc. It was the wrong thing to do, and does not really do what it said it did. Cc: Yi Yang <yi.y.yang@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-08 20:56:42 +0000