summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-09-12USB: CDC ACM: Fix NULL pointer dereferenceSven Schnelle
commit 99f347caa4568cb803862730b3b1f1942639523f upstream. If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12USB: emi62: remove __devinit* from the struct usb_device_id tableGreg Kroah-Hartman
commit 83957df21dd94655d2b026e0944a69ff37b83988 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Bjørn Mork <bjorn@mork.no> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces ↵Michael Grzeschik
in eth_stop commit b1b552a69b8805e7e338074a9e8b670b4a795218 upstream. This patch fixes an issue introduced by patch: 72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep Without this patch we see a kworker taking 100% CPU, after this sequence: - Connect gadget to a windows host - load g_ether - ifconfig up <ip>; ifconfig down; ifconfig up - ping <windows host> The "ifconfig down" results in calling eth_stop(), which will call usb_ep_disable() and, if the carrier is still ok, usb_ep_enable(): usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } The ep should stay enabled, but will not, as ep_disable set the desc pointer to NULL, therefore the subsequent ep_enable will fail. This leads to permanent rescheduling of the eth_work() worker as usb_ep_queue() (called by the worker) will fail due to the unconfigured endpoint. We fix this issue by saving the ep descriptors and re-assign them before usb_ep_enable(). Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12usb: serial: mos7840: Fixup mos7840_chars_in_buffer()Mark Ferrell
commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream. * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell <mferrell@uplogix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12USB: support the new interfaces of Huawei Data Card devices in option driverfangxiaozhi
commit ee6f827df9107139e8960326e49e1376352ced4d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12USB: option: Add Vodafone/Huawei K5005 supportBjørn Mork
commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream. Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12USB: ftdi_sio: Add VID/PID for Kondo Serial USBOzan Çağlayan
commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream. This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan <ozancag@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.Sarah Sharp
commit 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 upstream. Gary reports that with recent kernels, he notices more xHCI driver warnings: xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? We think his Etron xHCI host controller may have the same buggy behavior as the Fresco Logic xHCI host. When a short transfer is received, the host will mark the transfer as successfully completed when it should be marking it with a short completion. Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron host is discovered. Note that Gary has revision 1, but if Etron fixes this bug in future revisions, the quirk will have no effect. This patch should be backported to kernels as old as 2.6.36, that contain a backported version of commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk for Fresco Logic host." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Gary E. Miller <gem@rellim.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12xhci: Increase reset timeout for Renesas 720201 host.Sarah Sharp
commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl> [bwh: Backported to 3.2: result of second handshake call is returned directly] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-10USB: echi-dbgp: increase the controller wait time to come out of halt.Colin Ian King
commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-10usb: feed USB device information to the /dev/random driverTheodore Ts'o
commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream. Send the USB device's serial, product, and manufacturer strings to the /dev/random driver to help seed its pools. Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02USB: option: add ZTE MF821DBjørn Mork
commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream. Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02USB: option: Ignore ZTE (Vodafone) K3570/71 net interfacesAndrew Bird (Sphere Systems)
commit f264ddea0109bf7ce8aab920d64a637e830ace5b upstream. These interfaces need to be handled by QMI/WWAN driver Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02usbdevfs: Correct amount of data copied to user in processcompl_compatHans de Goede
commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream. iso data buffers may have holes in them if some packets were short, so for iso urbs we should always copy the entire buffer, just like the regular processcompl does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02usb: gadget: Fix g_ether interface link statusKevin Cernekee
commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream. A "usb0" interface that has never been connected to a host has an unknown operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted when queried by ifconfig, ifplugd, etc. This is a result of calling netif_carrier_off() too early in the probe function; it should be called after register_netdev(). Similar problems have been fixed in many other drivers, e.g.: e826eafa6 (bonding: Call netif_carrier_off after register_netdevice) 0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe) 6a3c869a6 (cxgb4: fix reported state of interfaces without link) Fix is to move netif_carrier_off() to the end of the function. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: cdc-wdm: fix lockup on error in wdm_readBjørn Mork
commit b086b6b10d9f182cd8d2f0dcfd7fd11edba93fc9 upstream. Clear the WDM_READ flag on empty reads to avoid running forever in an infinite tight loop, causing lockups: Jul 1 21:58:11 nemi kernel: [ 3658.898647] qmi_wwan 2-1:1.2: Unexpected error -71 Jul 1 21:58:36 nemi kernel: [ 3684.072021] BUG: soft lockup - CPU#0 stuck for 23s! [qmi.pl:12235] Jul 1 21:58:36 nemi kernel: [ 3684.072212] CPU 0 Jul 1 21:58:36 nemi kernel: [ 3684.072355] Jul 1 21:58:36 nemi kernel: [ 3684.072367] Pid: 12235, comm: qmi.pl Tainted: P O 3.5.0-rc2+ #13 LENOVO 2776LEG/2776LEG Jul 1 21:58:36 nemi kernel: [ 3684.072383] RIP: 0010:[<ffffffffa0635008>] [<ffffffffa0635008>] spin_unlock_irq+0x8/0xc [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072388] RSP: 0018:ffff88022dca1e70 EFLAGS: 00000282 Jul 1 21:58:36 nemi kernel: [ 3684.072393] RAX: ffff88022fc3f650 RBX: ffffffff811c56f7 RCX: 00000001000ce8c1 Jul 1 21:58:36 nemi kernel: [ 3684.072398] RDX: 0000000000000010 RSI: 000000000267d810 RDI: ffff88022fc3f650 Jul 1 21:58:36 nemi kernel: [ 3684.072403] RBP: ffff88022dca1eb0 R08: ffffffffa063578e R09: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072407] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002 Jul 1 21:58:36 nemi kernel: [ 3684.072412] R13: 0000000000000246 R14: ffffffff00000002 R15: ffff8802281d8c88 Jul 1 21:58:36 nemi kernel: [ 3684.072418] FS: 00007f666a260700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 1 21:58:36 nemi kernel: [ 3684.072428] CR2: 000000000270d9d8 CR3: 000000022e865000 CR4: 00000000000007f0 Jul 1 21:58:36 nemi kernel: [ 3684.072433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 1 21:58:36 nemi kernel: [ 3684.072444] Process qmi.pl (pid: 12235, threadinfo ffff88022dca0000, task ffff88022ff76380) Jul 1 21:58:36 nemi kernel: [ 3684.072448] Stack: Jul 1 21:58:36 nemi kernel: [ 3684.072458] ffffffffa063592e 0000000100020000 ffff88022fc3f650 ffff88022fc3f6a8 Jul 1 21:58:36 nemi kernel: [ 3684.072466] 0000000000000200 0000000100000000 000000000267d810 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072475] 0000000000000000 ffff880212cfb6d0 0000000000000200 ffff880212cfb6c0 Jul 1 21:58:36 nemi kernel: [ 3684.072479] Call Trace: Jul 1 21:58:36 nemi kernel: [ 3684.072489] [<ffffffffa063592e>] ? wdm_read+0x1a0/0x263 [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072500] [<ffffffff8110adb7>] ? vfs_read+0xa1/0xfb Jul 1 21:58:36 nemi kernel: [ 3684.072509] [<ffffffff81040589>] ? alarm_setitimer+0x35/0x64 Jul 1 21:58:36 nemi kernel: [ 3684.072517] [<ffffffff8110aec7>] ? sys_read+0x45/0x6e Jul 1 21:58:36 nemi kernel: [ 3684.072525] [<ffffffff813725f9>] ? system_call_fastpath+0x16/0x1b Jul 1 21:58:36 nemi kernel: [ 3684.072557] Code: <66> 66 90 c3 83 ff ed 89 f8 74 16 7f 06 83 ff a1 75 0a c3 83 ff f4 The WDM_READ flag is normally cleared by wdm_int_callback before resubmitting the read urb, and set by wdm_in_callback when this urb returns with data or an error. But a crashing device may cause both a read error and cancelling all urbs. Make sure that the flag is cleared by wdm_read if the buffer is empty. We don't clear the flag on errors, as there may be pending data in the buffer which should be processed. The flag will instead be cleared on the next wdm_read call. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: option: Add MEDIATEK product idsGaosen Zhang
commit aacef9c561a693341566a6850c451ce3df68cb9a upstream. Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: option: add ZTE MF60Bjørn Mork
commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream. Switches into a composite device by ejecting the initial driver CD. The four interfaces are: QCDM, AT, QMI/wwan and mass storage. Let this driver manage the two serial interfaces: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1402 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE WCDMA Technologies MSM S: SerialNumber=xxxxx C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25usb: Add support for root hub port status CASStanislaw Ledwon
commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream. The host controller port status register supports CAS (Cold Attach Status) bit. This bit could be set when USB3.0 device is connected when system is in Sx state. When the system wakes to S0 this port status with CAS bit is reported and this port can't be used by any device. When CAS bit is set the port should be reset by warm reset. This was not supported by xhci driver. The issue was found when pendrive was connected to suspended platform. The link state of "Compliance Mode" was reported together with CAS bit. This link state was also not supported by xhci and core/hub.c. The CAS bit is defined only for xhci root hub port and it is not supported on regular hubs. The link status is used to force warm reset on port. Make the USB core issue a warm reset when port is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver to report 'compliance mode' when the CAS is set. This force warm reset on the root hub port. This patch should be backported to stable kernels as old as 3.2, that contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When hot reset for USB3 fails, try warm reset." Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: CP210x Add 10 Device IDsCraig Shelley
commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream. This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: option: add id for Cellient MEN-200Dmitry Shmygov
commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream. Add vendor and product ID to option.c driver for Cellient MEN-200 EVDO Rev.B 450MHz data module. http://cellient.com Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: fix gathering of interface associationsDaniel Mack
commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream. TEAC's UD-H01 (and probably other devices) have a gap in the interface number allocation of their descriptors: Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 220 bNumInterfaces 3 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 [...] Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 1 Audio bFunctionSubClass 0 bFunctionProtocol 32 iFunction 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 [...] Once a configuration is selected, usb_set_configuration() walks the known interfaces of a given configuration and calls find_iad() on each of them to set the interface association pointer the interface is included in. The problem here is that the loop variable is taken for the interface number in the comparison logic that gathers the association. Which is fine as long as the descriptors are sane. In the case above, however, the logic gets out of sync and the interface association fields of all interfaces beyond the interface number gap are wrong. Fix this by passing the interface's bInterfaceNumber to find_iad() instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: bEN <ml_all@circa.be> Reported-by: Ivan Perrone <ivanperrone@hotmail.com> Tested-by: ivan perrone <ivanperrone@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19usb: cdc-acm: fix devices not unthrottled on openOtto Meta
commit 6c4707f3f8c44ec18282e1c014c80e1c257042f9 upstream. Currently CDC-ACM devices stay throttled when their TTY is closed while throttled, stalling further communication attempts after the next open. Unthrottling during open/activate got lost starting with kernel 3.0.0 and this patch reintroduces it. Signed-off-by: Otto Meta <otto.patches@sister-shadow.de> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: fix PS3 EHCI systemsRicardo Martins
commit 4f7a67e2dd49fbfba002c453bc24bf00e701cc71 upstream. After commit aaa0ef289afe9186f81e2340114ea413eef0492a "PS3 EHCI QH read work-around", Terratec Grabby (em28xx) stopped working with AMD Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only fix, the following patch adds a conditional block around it. Signed-off-by: Ricardo Martins <rasm@fe.up.pt> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19usb: PS3 EHCI QH read work-aroundGeoff Levand
commit aaa0ef289afe9186f81e2340114ea413eef0492a upstream. PS3 EHCI HC errata fix 244. The SCC EHCI HC will not correctly perform QH reads that occur near or span a micro-frame boundry. This is due to a problem in the Nak Count Reload Control logic (EHCI Specification 1.0 Section 4.9.1). The work-around for this problem is for the HC driver to set I=1 (inactive) for QHs with H=1 (list head). Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19xHCI: Increase the timeout for controller save/restore state operationAndiry Xu
commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream. When system software decides to power down the xHC with the intent of resuming operation at a later time, it will ask xHC to save the internal state and restore it when resume to correctly recover from a power event. Two bits are used to enable this operation: Save State and Restore State. xHCI spec 4.23.2 says software should "Set the Controller Save/Restore State flag in the USBCMD register and wait for the Save/Restore State Status flag in the USBSTS register to transition to '0'". However, it does not define how long software should wait for the SSS/RSS bit to transition to 0. Currently the timeout is set to 1ms. There is bug report (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697) indicates that the timeout is too short for ASMedia ASM1042 host controller to save/restore the state successfully. Increase the timeout to 10ms helps to resolve the issue. This patch should be backported to stable kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Andiry Xu <andiry.xu@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19xhci: Don't free endpoints in xhci_mem_cleanup()Takashi Iwai
commit 32f1d2c536d0c26c5814cb0e6a0606c42d02fac1 upstream. This patch fixes a few issues introduced in the recent fix [f8a9e72d: USB: fix resource leak in xhci power loss path] - The endpoints listed in bw table are just links and each entry is an array member of dev->eps[]. But the commit above adds a kfree() call to these instances, and thus it results in memory corruption. - It clears only the first entry of rh_bw[], but there can be multiple ports. - It'd be safer to clear the list_head of ep as well, not only removing from the list, as it's checked in xhci_discover_or_reset_device(). This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs." Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19xhci: Fix invalid loop check in xhci_free_tt_info()Takashi Iwai
commit 46ed8f00d8982e49f8fe2c1a9cea192f640cb3ba upstream. xhci_free_tt_info() may access the invalid memory when it removes the last entry but the list is not empty. Then tt_next reaches to the list head but it still tries to check the tt_info of that entry. This patch fixes the bug and cleans up the messy code by rewriting with a simple list_for_each_entry_safe(). This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs." Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: serial: Enforce USB driver and USB serial driver matchBjørn Mork
commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream. We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2Alan Stern
commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream. This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: option: add more YUGA device ids说不得
commit 0ef0be15fd2564767f114c249fc4af704d8e16f4 upstream. Signed-off-by: gavin zhu <gavin.zhu@qq.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: option: fix memory leakJohan Hovold
commit b9c3aab315b51f81649a0d737c4c73783fbd8de0 upstream. Fix memory leak introduced by commit 383cedc3bb435de7a2 ("USB: serial: full autosuspend support for the option driver") which allocates usb-serial data but never frees it. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: option: fix port-data abuseJohan Hovold
commit 4273f9878b0a8271df055e3c8f2e7f08c6a4a2f4 upstream. Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct... Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: mct_u232: Fix incorrect TIOCMSET returnAlan Cox
commit 1aa3c63cf0a79153ee13c8f82e4eb6c40b66a161 upstream. The low level helper returns 1 on success. The ioctl should however return 0. As this is the only user of the helper return, make the helper return 0 or an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: option: Updated Huawei K4605 has better idAndrew Bird
commit 42ca7da1c2363dbef4ba1b6917c4c02274b6a5e2 upstream. Later firmwares for this device now have proper subclass and protocol info so we can identify it nicely without needing to use the blacklist. I'm not removing the old 0xff matching as there may be devices in the field that still need that. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modemTom Cassidy
commit 19a3dd1575e954e8c004413bee3e12d3962f2525 upstream. Add support for Sierra Wireless AirCard 320U modem Signed-off-by: Tomas Cassidy <tomas.cassidy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: serial: cp210x: add Optris MS Pro usb idMikko Tuumanen
commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream. Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapterEvan McNabb
commit e00a54d772210d450e5c1a801534c3c8a448549f upstream. Add support for RT Systems USB-RTS01 USB to Serial adapter: http://www.rtsystemsinc.com/Photos/USBRTS01.html Tested by controlling Icom IC-718 amateur radio transceiver via hamlib. Signed-off-by: Evan McNabb <evan@mcnabbs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: qcserial: Add Sierra Wireless device IDsBjørn Mork
commit c41444ccfa33a1c20efa319e554cb531576e64a2 upstream. Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19usb: cdc-wdm: Add device-id for Huawei 3G/LTE modemsBjørn Mork
commit fec67b45bf045582c3172101970090d640cd56d9 upstream. [v2: Editorial changes suggested by Sergei Shtylyov] These modems use the Qualcomm MSM Interface (QMI) protocol for management of their CDC ECM like wwan interface. This driver is perfect for exporting the protocol to userspace. The created character device will be indistinguishable from a common AT command based Device Management interface, so userspace applications must do some intelligent matching on the USB device. Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19usb: musb_gadget: fix crash caused by dangling pointerGrazvydas Ignotas
commit 08f75bf14fadaa81fe362d5acda9b77b113dd0a2 upstream. usb_ep_ops.disable must clear external copy of the endpoint descriptor, otherwise musb crashes after loading/unloading several gadget modules in a row: Unable to handle kernel paging request at virtual address bf013730 pgd = c0004000 [bf013730] *pgd=8f26d811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] Modules linked in: g_cdc [last unloaded: g_file_storage] CPU: 0 Not tainted (3.2.17 #647) PC is at musb_gadget_enable+0x4c/0x24c LR is at _raw_spin_lock_irqsave+0x4c/0x58 [<c027c030>] (musb_gadget_enable+0x4c/0x24c) from [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) from [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) from [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) from [<c027b744>] (musb_g_ep0_irq+0x844/0x924) [<c027b744>] (musb_g_ep0_irq+0x844/0x924) from [<c027a97c>] (musb_interrupt+0x79c/0x864) [<c027a97c>] (musb_interrupt+0x79c/0x864) from [<c027aaa8>] (generic_interrupt+0x64/0x7c) [<c027aaa8>] (generic_interrupt+0x64/0x7c) from [<c00797cc>] (handle_irq_event_percpu+0x28/0x178) ... Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31USB: Remove races in devio.cHuajun Li
commit 4e09dcf20f7b5358615514c2ec8584b248ab8874 upstream. There exist races in devio.c, below is one case, and there are similar races in destroy_async() and proc_unlinkurb(). Remove these races. cancel_bulk_urbs() async_completed() ------------------- ----------------------- spin_unlock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); wake_up(&ps->wait); Lead to free_async() be triggered, then urb and 'as' will be freed. usb_unlink_urb(as->urb); ===> refer to the freed 'as' Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oncaphillis <oncaphillis@snafu.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31xhci: Reset reserved command ring TRBs on cleanup.Sarah Sharp
commit 33b2831ac870d50cc8e01c317b07fb1e69c13fe1 upstream. When the xHCI driver needs to clean up memory (perhaps due to a failed register restore on resume from S3 or resume from S4), it needs to reset the number of reserved TRBs on the command ring to zero. Otherwise, several resume cycles (about 30) with a UAS device attached will continually increment the number of reserved TRBs, until all command submissions fail because there isn't enough room on the command ring. This patch should be backported to kernels as old as 2.6.32, that contain the commit 913a8a344ffcaf0b4a586d6662a2c66a7106557d "USB: xhci: Change how xHCI commands are handled." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31USB: fix resource leak in xhci power loss pathOliver Neukum
commit f8a9e72d125f4e00ec529ba67b674321a1f3bf31 upstream. Some more data structures must be freed and counters reset if an XHCI controller has lost power. The failure to do so renders some chips inoperative after a certain number of S4 cycles. This patch should be backported to kernels as old as 3.2, that contain the commits c29eea621900f18287d50519f72cb9113746d75a "xhci: Implement HS/FS/LS bandwidth checking." and commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Implement HS/FS/LS bandwidth checking." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31usbcore: enable USB2 LPM if port suspend failsAndiry Xu
commit c3e751e4f4754793bb52bd5ae30e9cc027edbb12 upstream. USB2 LPM is disabled when device begin to suspend and enabled after device is resumed. That's because USB spec does not define the transition from U1/U2 state to U3 state. If usb_port_suspend() fails, usb_port_resume() is never called, and USB2 LPM is disabled in this situation. Enable USB2 LPM if port suspend fails. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". Signed-off-by: Andiry Xu <andiry.xu@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31xhci: Add new short TX quirk for Fresco Logic host.Sarah Sharp
commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 upstream. Sergio reported that when he recorded audio from a USB headset mic plugged into the USB 3.0 port on his ASUS N53SV-DH72, the audio sounded "robotic". When plugged into the USB 2.0 port under EHCI on the same laptop, the audio sounded fine. The device is: Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset The problem was tracked down to the Fresco Logic xHCI host controller not correctly reporting short transfers on isochronous IN endpoints. The driver would submit a 96 byte transfer, the device would only send 88 or 90 bytes, and the xHCI host would report the transfer had a "successful" completion code, with an untransferred buffer length of 8 or 6 bytes. The successful completion code and non-zero untransferred length is a contradiction. The xHCI host is supposed to only mark a transfer as successful if all the bytes are transferred. Otherwise, the transfer should be marked with a short packet completion code. Without the EHCI bus trace, we wouldn't know whether the xHCI driver should trust the completion code or the untransferred length. With it, we know to trust the untransferred length. Add a new xHCI quirk for the Fresco Logic host controller. If a transfer is reported as successful, but the untransferred length is non-zero, print a warning. For the Fresco Logic host, change the completion code to COMP_SHORT_TX and process the transfer like a short transfer. This should be backported to stable kernels that contain the commit f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some Fresco Logic hosts." That commit was marked for stable kernels as old as 2.6.36. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Sergio Correia <lists@uece.net> Tested-by: Sergio Correia <lists@uece.net> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31USB: cdc-wdm: cannot use dev_printk when device is goneBjørn Mork
commit 6b0b79d38806481c1c8fffa7c5842f3c83679a42 upstream. We cannot dereference a removed USB interface for dev_printk. Use pr_debug instead where necessary. Flush errors are expected if device is unplugged and are therefore best ingored at this point. Move the kill_urbs() call in wdm_release with dev_dbg() for the non disconnect, as we know it has already been called if WDM_DISCONNECTING is set. This does not actually fix anything, but keeps the code more consistent. Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31USB: cdc-wdm: add debug messages on cleanupBjørn Mork
commit 880bca3a2a6f159d7453e0cbcbfe2f1d8204d907 upstream. Device state cleanup is done in either wdm_disconnect or wdm_release depending on the order they are called. Adding a couple of debug messages to document the program flow. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-31USB: cdc-wdm: poll must return POLLHUP if device is goneBjørn Mork
commit 616b6937e348ef2b4c6ea5fef2cd3c441145efb0 upstream. Else the poll will be restarted indefinitely in a tight loop, preventing final device cleanup. Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2026-03-09 19:17:39 +0000