summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2008-09-23USB: revert recovery from transient errorsAlan Stern
This patch (as1135) essentially reverts the major parts of two earlier patches to usbcore, because they ended up causing a regression. Trying to recover from transient communication errors can lead to other problems, because operations that failed during the error period are not always retried. The simplest example is the initial Set-Config request sent after device enumeration; if it gets lost then it will not be retried and the device will remain unconfigured. This patch restores the old behavior in which any port disconnect or port disable causes the entire device structure to be removed, fixing a reported regression. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb: unusual devs patch for Nokia 5310 Music XpressDavid Almaroad
The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad <dalmaroad@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb: ftdi_sio: add support for Domintell devicesGaetan Carlier
Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: drivers/usb/musb/: disable it on SuperHAndrew Morton
In file included from drivers/usb/musb/musb_core.h:59, from drivers/usb/musb/musb_core.c:108: drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here Cc: Karsten Keil <kkeil@suse.de> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB Serial: Sierra: Add MC8785 VID/PIDKevin Lloyd
Add another MC8785 VID/PID Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: serial: add ZTE CDMA Tech id to option driverOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)Jaroslav Kysela
USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb serial: ti_usb_3410_5052 obviously broken by firmware changesChris Adams
While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: fsl_usb2_udc: fix VDBG() format stringPeter Korsgaard
Fixes: drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup': drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: unusual_devs addition for RockChip MP3 playerAlan Stern
This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: SERIAL CP2101 add device IDsCraig Shelley
Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb-serial: Add Siemens EF81 to PL-2303 hack triggersAndreas Bombe
This hardware needs the pl2303 hack in order to work properly :( Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: fix EHCI periodic transfersDavid Brownell
As noted by Stefan Neis <Stefan.Neis@kobil.com>, we had a recent regression with EHCI periodic transfers, in some (seemingly not all that common) cases. The root cause was that the schedule activation was only loosely coupled to the addition or removal of transfers, so two different execution contexts could both think they had to deactivate (or conversely activate) the schedule. So this fix tightens that coupling, managing it more like a refcount. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb: musb: fix include pathFelipe Balbi
headers were moved, fixing. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: Fixing Nokia 3310c in storage modeFilip Joelsson
I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson <filip@blueturtle.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb gadget: fix omap_udc DMA regressionDavid Brownell
This resolves another regression caused by the "use omap_read/write instead of __REG" patch: the hardware address used for DMA to/from the UDC became wrong. Bug noted by Russell King. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: fix hcd interrupt disablingGeoff Levand
Commit de85422b94ddb23c021126815ea49414047c13dc, 'USB: fix interrupt disabling for HCDs with shared interrupt handlers' changed usb_add_hcd() to strip IRQF_DISABLED from irqflags prior to calling request_irq() with the justification that such a removal was necessary for shared interrupts to work properly. Unfortunately, the change in that commit unconditionally removes the IRQF_DISABLED flag, causing problems on platforms that don't use a shared interrupt but require IRQF_DISABLED. This change adds a check for IRQF_SHARED prior to removing the IRQF_DISABLED flag. Fixes the PS3 system startup hang reported with recent Fedora and OpenSUSE kernels. Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig), as local_irq_enable_in_hardirq() is defined as a null statement for that config. CC: stable <stable@kernel.org> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Stefan Becker <Stefan.Becker@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: Correct Sierra Wireless USB EVDO Modem Device IDTony Murray
I was trying to figure out why my device wasn't supported by the drivers/usb/serial/sierra.c driver, while looking throught the device IDs I spotted what I believe to be a typo in the device IDs. Please apply the following patch If you look down further, there is another HP wireless broadband card, which has a vendor ID of 03f0, like my device. Below is my "lsusb -v -d 03f0:1b1d". Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x03f0 Hewlett-Packard idProduct 0x1b1d bcdDevice 0.01 iManufacturer 1 HP iProduct 2 HP ev2200 1xEV-DO Broadband Wireless Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Data Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 128 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) From: Tony Murray <murraytony@gmail.com> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: Fix the Nokia 6300 storage-mode.Richard Nauber
This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber <RichardNauber@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: ehci: fix some ehci hangs and crashesDavid Brownell
I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT" patch from earlier this year perpetuated a potential problem: it can mark the controller as halted when it's still running (but not acting as, perhaps wrongly, expected). That caused some hangs and crashes, rather than more polite failure modes of a truly halted controller. This patch forces a true halt, and emits a (previously missing) diagnostic. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB Serial: Sierra: Device addition & version revKevin Lloyd
This patch adds devices to the sierra driver and rev's the driver version. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB Storage: Sierra: Non-configurable TRU-InstallKevin Lloyd
This patch alters the Sierra Mass Storage patch so that it is non-configurable. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5241/1: provide ioremap_wc() [ARM] omap: fix virtual vs physical address space confusions [ARM] remove unused #include <version.h> [ARM] omap: fix build error in ohci-omap.c [ARM] omap: fix gpio.c build error
2008-09-08usb: fix null deferences in low level usb serialJason Wessel
The hw interface drivers for the usb serial devices deference the tty structure to set up the parameters for the initial console. The tty structure should be passed as a parameter to the set_termios() call. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-04[ARM] omap: fix build error in ohci-omap.cRussell King
drivers/usb/host/ohci-omap.c: In function 'ohci_omap_init': drivers/usb/host/ohci-omap.c:228: error: 'start_hnp' undeclared (first use in this function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-21USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.Stefan Lippers-Hollmann
sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. usb 1-2: new high speed USB device using ehci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: USB2VGA dongle found at address 4 usb 1-2: Allocated 8 output buffers usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usb 1-2: New USB device found, idVendor=0711, idProduct=0918 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: automatically enable RHSC interruptsAlan Stern
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Don't rebind before "complete" callbackAlan Stern
This patch (as1130) fixes an incompatibility between the new PM infrastructure and USB power management. We are not allowed to call drivers' probe routines during a system sleep transition between the "prepare" and "complete" callbacks, but that's exactly what we do when a driver doesn't have full suspend/resume support. Such drivers are unbound during the "suspend" call and reprobed during the "resume" call. The patch causes the reprobe step to be skipped if the "complete" callback hasn't been issued yet, i.e., if the interface's dev.power.status field is not equal to DPM_ON. Thus during the "resume" callback nothing bad will happen, and during the final "complete" callback the reprobing will occur as desired. This fixes the problem reported in Bugzilla #11263. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Add new PM callback methods for USBAlan Stern
This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Defer Set-Interface for suspended devicesAlan Stern
This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Add udev argument to interface suspend/resume functionsAlan Stern
This patch (as1127) makes a minor change to the prototypes of the usb_suspend_interface() and usb_resume_interface() routines. Now the usb_device structure is passed as an argument, instead of being computed on-the-fly from the usb_interface argument. It makes the code look simpler, even if it really isn't much different from before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: cdc-acm: don't unlock acm->mutex on error pathAlexey Dobriyan
On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote: > I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify" > and the kernel oopsed: > > BUG: unable to handle kernel NULL pointer dereference at 00000458 > IP: [<c0444b52>] mutex_unlock+0x0/0xb > [<c03830ae>] acm_tty_open+0x4c/0x214 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Tested-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: stable <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21MUSB: Fix index register corruption seen with g_ether and Windows hostAnand Gadiyar
If Indexed Mode register accesses are enabled, the ep0_rxstate() function calls musb_g_ep0_giveback() before writing to the CSR register. When control returns to this ep0_rxstate, the index register contents are over-written. This causes the CSR register write to fail. Fixed by writing the correct value into the index register before writing to the CSR. This was observed only in ep0_rxstate() with g_ether loaded and the device connected to a MS Windows host PC. Anticipatively fixed ep0_txstate() as well. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of MUSB_LOGLEVEL and use parameterFelipe Balbi
We can change debugging level on the fly via /sys/module/musb_hdrc/parameters/debug. We can also get rid of the LOGLEVEL facility in Kconfig and rely only in module parameter. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of procfs entryFelipe Balbi
Drivers should not add procfs. The functionality in the old procfs file will be moved to debugfs. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Fix pxa27x_udc usb speed handling.Robert Jarzmik
The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: cdc-acm: quirk for Conexant CX93010 USB modemEric Sandeen
This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010 chipset) up and running to the point where I can send AT commands and retrieve caller ID data, which is all I want to do with it. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: fix bug in usb_unlink_anchored_urbs()Oliver Neukum
Irqs must not accidentally be reenabled. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb-serial: option support HSDPA modem A2502Hiroshi Miura
This patch support NTT DoCoMo A2502 3G/HSDPA modem on option driver. It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW. It support 3.6Mbps/7.2Mbps hight speed communication. I have tested A2502 with NTT DoCoMo MoperaU ISP service. Signed-off-by: Hiroshi Miura <miurahr@nttdata.co.jp> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: ISP1760: fixed trivial math in commentEnrico Scholz
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-16Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits) [ARM] 5191/1: ARM: remove CVS keywords [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16 [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD [ARM] 5198/1: PalmTX: PCMCIA fixes [ARM] Fix a pile of broken watchdog drivers [ARM] update mach-types [ARM] 5196/1: fix inline asm constraints for preload [ARM] 5194/1: update .gitignore [ARM] add proc-macros.S include to proc-arm940 and proc-arm946 [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags [ARM] 5193/1: Wire up missing syscalls [ARM] traps: don't call undef hook functions with spinlock held [ARM] 5183/2: Provide Poodle LoCoMo GPIO names [ARM] dma-mapping: provide sync_range APIs [ARM] dma-mapping: improve type-safeness of DMA translations [ARM] Kirkwood: instantiate the orion_spi driver in the platform code [ARM] prevent crashing when too much RAM installed [ARM] Kirkwood: Instantiate mv_xor driver [ARM] Orion: Instantiate mv_xor driver for 5182 ...
2008-08-13usb: musb: pass configuration specifics via pdataFelipe Balbi
Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13usb: musb: fix hanging when rmmod gadget driverFelipe Balbi
If we try to modprobe a second gadget driver before rmmoding the first one, the reference for the first gadget driver would get NULLed avoiding usb to change gadget drivers later. Cc: David Brownell <david-b@pacbell.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: Add MUSB and TUSB supportFelipe Balbi
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: serial: remove CONFIG_USB_DEBUG from sierra and option driversGreg Kroah-Hartman
These drivers should not be relying on CONFIG_USB_DEBUG. By doing this, it prevents users of kernels that do not enable this option from enabling debugging in these drivers, unlike all other usb-serial drivers. Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: Add vendor/product id of ZTE MF628 to optionOliver Martin
This adds the vendor and product id (19d2:0015) of the ZTE MF628 HSDPA modem to the option driver. It still needs a mode switch command issued beforehand, this is currently handled by a userspace tool. Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: quirk PLL power down modeLibin Yang
On some AMD 700 series southbridges, ISO OUT transfers (such as audio playback through speakers) on the USB OHCI controller may be corrupted when an A-Link express power saving feature is active. PLL power down mode in conjunction with link power management feature L1 being enabled is the bad combination ... this patch prevents them from being enabled when ISO transfers are pending. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: omap_udc: fix compilation with debug enabledDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13usb: cdc-acm: drain writes on closeDavid Brownell
Add a mechanism to let the write queue drain naturally before closing the TTY, rather than always losing that data. There is a timeout, so it can't wait too long. Provide missing locking inside acm_wb_is_avail(); it matters more now. Note, this presumes an earlier patch was applied, removing a call to this routine where the lock was held. Slightly improved diagnostics on write URB completion, so we can tell when a write URB gets killed and, if so, how much data it wrote first ... and so that I/O path is normally silent (and can't much change timings). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>