summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2016-03-04usb: renesas_usbhs: Don't check CSSTS bit if peripheral modeYoshihiro Shimoda
Since Some SoCs (e.g. R-Car Gen2) don't have the CSSTS bit in the pipectrl registers ({DCP,PIPEn}CTR) because such SoCs have peripheral mode only. So, this driver should not check the CSSTS bit if peripheral mode is running. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: renesas_usbhs: add R-Car Gen3 power controlYoshihiro Shimoda
Since the usb2 phy driver for gen3 (phy-rcar-gen3-usb2) cannot access LPSTS and UGCTRL2 registers in the HSUSB module, this driver have to initialize the registers. So, this patch adds such handling code into rcar3.c. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc3: Enable SuperSpeedPlusJohn Youn
Enable SuperSpeedPlus by programming the DCFG.speed and after enumerating, set gadget->speed appropriately. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc3: Update maximum_speed for SuperSpeedPlusJohn Youn
If the maximum_speed is not set, set it to a known value, either SuperSpeed or SuperSpeedPlus based on the type of controller we are using. If we are on DWC_usb31 controller, check the PHY interface to see if it is capable of SuperSpeedPlus. Also this check is moved after dwc3_core_init() so that we can check dwc->revision. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc3: Update speed checks for SuperSpeedPlusJohn Youn
Update various places where the speed is checked so that it takes into account SuperSpeedPlus properly. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc3: Update register fields for SuperSpeedPlusJohn Youn
Update various registers fields definitions for the DWC_usb31 controller for SuperSpeedPlus support. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc3: DWC_usb31 controller checkJohn Youn
Add a convenience function to check if the controller is DWC_usb31. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: f_mass_storage: Enable SuperSpeedPlusJohn Youn
Enable superspeed plus configuration for the mass storage gadget. The mass storage function doesn't do anything special for SuperSpeedPlus. Just pass in the same SuperSpeed descriptors for SuperSpeedPlus. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Update debug message for SuperSpeedPlusJohn Youn
Update the debug message reporting the speeds that a configuration supports for SuperSpeedPlus. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Configure the usb_ep for SuperSpeedPlusJohn Youn
Configure the usb_ep using the SuperSpeedPlus descriptors if connected in SuperSpeedPlus. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Write SuperSpeedPlus config descriptorsJohn Youn
Enable writing of SuperSpeedPlus descriptors for any SuperSpeedPlus capable configuration when connected in SuperSpeedPlus. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Add function to get descriptorsJohn Youn
There are a couple places in the code that get the function descriptors based on the speed. Move this lookup into a function call and add support to handle the SuperSpeedPlus descriptors as well. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Count configs for SuperSpeedPlusJohn Youn
If enumerated in SuperSpeedPlus, count the configurations that support it. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: Update config for SuperSpeedPlusJohn Youn
When a function is added to a configuration with usb_add_function(), the configuration speed flags are updated. These flags indicate for which speeds the configuration is valid for. This patch adds a flag in the configuration for SuperSpeedPlus and also updates this based on the existence of ssp_descriptors. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: Update function for SuperSpeedPlusJohn Youn
Add a ssp_descriptors member to struct usb_function and handle the initialization and cleanup of it. This holds the SuperSpeedPlus descriptors for a function that supports SuperSpeedPlus. This is added by usb_assign_descriptors(). Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: Update usb_assign_descriptors for SuperSpeedPlusJohn Youn
Add the 'ssp_descriptors' parameter to the usb_assign_descriptors() function. This allows a function driver to add descriptors for SuperSpeedPlus speeds if it supports it. Also update all uses of this function in the gadget subsystem so that they pass NULL for the ssp_descriptors parameters. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Return SSP Dev Cap descriptorJohn Youn
If a gadget supports SuperSpeedPlus or higher speeds, return a SuperSpeedPlus USB Device Capability descriptor. Currently this implementation returns a fixed descriptor with typical values set. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: gadget: composite: Return bcdUSB 0x0310John Youn
The USB 3.1 specification replaces the USB 3.0 specification and all new devices that are running at SuperSpeed or higher speeds must report a bcdUSB of 0x0310. Refer to USB 3.1 Specification, Revision 1.0, Section 9.6. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-01Merge tag 'usb-ci-v4.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Add platform interface to choose ttctrl.ttha - Some tiny improvements
2016-03-01Merge 4.5-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-29usb: chipidea: imx: avoid EPROBE_DEFER printed as errorStefan Agner
Avoid printing an error if adding the device failes with return value EPROBE_DEFFER. This may happen e.g. due to missing GPIO for the vbus-supply regulator. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"Peter Chen
This reverts commit e765bfb73ff7. In the most of cases, we only use one transaction per frame and the frame rate may be high, If the platforms want to support multiple transactions but less frame rate cases like [1] and [2], it can set "non-zero-ttctrl-ttha" at dts. [1] http://www.spinics.net/lists/linux-usb/msg123125.html [2] http://www.spinics.net/lists/linux-usb/msg118679.html Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: add system interface for ttctrl.tthaPeter Chen
In chipidea IP RTL, there is a very limited design for siTD, the detail like below: There is no Max Packet Size at siTD, so it uses one constant for both Max Packet Size for packet and the packet size for the last transaction when considering schedule. If the ttctrl.ttha does not match against Hub Address field in siTD, this constant is 188 bytes, else this constant is 1023 bytes. If the ttctrl.ttha is non-zero value, RTL will use 188 as this constant, so it will lose the data if the packet size is larger than 188 bytes, eg, if we playback a wav which format is 48khz, 16 bits, 2 channels, the packet size will be 192bytes, but the controller will only send 188 bytes for this packet, the noise will be heared using USB audio card. The use case is single transaction, but higher frame rate. If the ttctr.ttha is zero value, we can send 1023 bytes within one transaction, but the controller will not accept the coming tranaction if it considers the schedule time is less than 1023 bytes. So the limitation is we can't schedule as many as transactions within frame. If the total bytes is already 256 bytes for previous transactions within frame, it can't accept another transaction. The use case is multiple transactions, but less frame rate. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: udc: remove unused value assignmentLi Jun
retval is assigned to be -EOVERFLOW but is overwritten later before it's used, remove this unused value assignment. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: add CI_HDRC_TURN_VBUS_EARLY_ON for imx23Stefan Wahren
Until now the imx23 uses the imx27 platform flag. But the imx23 needs the flag CI_HDRC_TURN_VBUS_EARLY_ON, too. So fix this by adding a separate platform flag. Suggested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-24Merge tag 'fixes-for-v4.5-rc6' of ↵Greg Kroah-Hartman
http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.5-rc6 The most important fixes here are: a) yet another fix to dwc3's EP transfer resource assignment logic. This time around we will be pre-allocating transfer resources to avoid any future issues; b) two DMA fixes for the old MUSB driver. c) dwc2's data toggle fix for FS Other than these, we have a few other minor fixes elsewhere.
2016-02-23usb: musb: fix DMA for host modeCristian Birsan
Commit ac33cdb16681 ("usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5") introduces a problem setting DMA host mode. The musb_advance_schedule() is called immediately after receiving an endpoint RX interrupt without waiting for the DMA transfer to complete. As a consequence when the dma complete interrupt arrives the in_qh member of hw_ep is already null an the musb_host_rx() exits on !urb error case. Fix the done condition that advances the musb schedule. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: phy: msm: Trigger USB state detection work in DRD modeIvan T. Ivanov
When working in Dual Role Device mode, USB state machine is not kicked, when host or gadget drivers are loaded. Fix this be explicitly triggering state detection on client driver load. Issue is that if the board is booted without micro usb cable and usb device attached, kernel fails to populate the usb host and device. The reason for this is that the state machine worker logic only checks for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker thread. However if the phy is configured in OTG mode it would fail to run the state machine, resulting in failure to detect for very first time. This patch fixes the issue by removing the explicit checks. Issue is noticed on Qualcomm Dragon board DB410C. [srinivas.kandagatla@linaro.org: Added more details to log] Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: net2280: fix endpoint max packet for super speed connectionsSimon Appleby
This patch fixes the register offset used for super-speed connection's max packet size. Without it using the 338x series of devices in enhanced mode will only allow full or high speed operation to function correctly. Signed-off-by: Simon Appleby <simon.appleby@pickeringtest.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: gadgetfs: unregister gadget only if it got successfully registeredMarek Szyprowski
Gadgetfs driver called usb_gadget_unregister_driver unconditionally, even if it didn't register it earlier due to other failures. This patch fixes this. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: remove driver from pending list on probe errorMarek Szyprowski
Retry gadget probe only if the probe result is -EPROBE_DEFER, not on every probe error. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-20usb: dwc2: USB_DWC2 should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "usb_gadget_map_request" [drivers/usb/dwc2/dwc2.ko] undefined! ERROR: "usb_gadget_unmap_request" [drivers/usb/dwc2/dwc2.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/dwc2/dwc2.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: core: Allow compilation on platforms where NO_DMA=yGeert Uytterhoeven
Some platforms don't have DMA, but we should still be able to build USB drivers for these platforms. They could still be used through vhci_hcd, usbip_host, or maybe something like USB passthrough in UML from a capable host. If NO_DMA=y: ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined! Add a few checks for CONFIG_HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: storage: use usb_store_dbg instead of US_DEBUGPXVictor Dodon
The US_DEBUGPX macro uses printk without specifying a kernel log level, so the default kernel log level is used, which may not match LOGLEVEL_DEBUG used in usb_stor_dbg. Remove the macro and use usb_store_dbg instead. Signed-off-by: Victor Dodon <printesoi@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: usbtmc: Fix disconnect/poll interactionDave Penkler
When the device is disconnected poll waiters were not being woken. Changes for v2: - add commit summary - add Fixes and Reported-by tags Fixes: eb6b92ecc0f9 ("Add support for receiving USBTMC USB488 SRQ notifications via poll/select") Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: host: xhci-rcar: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: renesas_usbhs: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20chipidea: error on overflow for port_test_writeAlan
The write value is 8bit, but currently writing a larger number (eg a doubled digit) is not errored but instead gets cast and sets off an action probably undesired. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb/misc/chaoskey: introduce an URB for asynchronous readsOliver Neukum
To allow for and clean handling of signals an URB is introduced. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb/misc/chaoskey: Cleanup probe failure pathsOliver Neukum
Shares the cleanup code between all probe failure paths, instead of having per-failure cleanup at each point in the function. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20Revert "usb: add HAS_IOMEM dependency to USB_APPLEDISPLAY"Greg Kroah-Hartman
This reverts commit 4b61b4f205eabfc9f863f805858aa5b32deb3de5. As reported by Oliver, this change was unnecessary. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20Revert "usb: hub: do not clear BOS field during reset device"Greg Kroah-Hartman
This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407. Tony writes: This upstream commit is causing an oops: d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by: Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20Merge tag 'usb-serial-4.5-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.5-rc5 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-19usb: chipidea: fix return value check in ci_hdrc_pci_probe()Wei Yongjun
In case of error, the function usb_phy_generic_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-19usb: chipidea: error on overflow for port_test_writeAlan
The write value is 8bit, but currently writing a larger number (eg a doubled digit) is not errored but instead gets cast and sets off an action probably undesired. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> (Change the style of commit log to fix checkpatch.pl warning)
2016-02-18USB: option: add "4G LTE usb-modem U901"Bjørn Mork
Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Cc: <stable@vger.kernel.org> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-18USB: cp210x: add IDs for GE B650V3 and B850V3 boardsKen Lin
Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-18USB: option: add support for SIM7100EAndrey Skvortsov
$ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-17usb: musb: Fix DMA desired mode for Mentor DMA engineCristian Birsan
Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c") introduces a problem setting the desired channel mode for the Mentor DMA engine. There is a case where an address is incorrectly assigned to the DMA channel desired mode when it should instead be assigned the actual mode value. This results in the value of channel->desired_mode not being correct. Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-17usb: gadget: fsl_qe_udc: fix IS_ERR_VALUE usageAndrzej Hajda
IS_ERR_VALUE macro should be used only with unsigned long type. Otherwise it can work incorrectly. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-03-10 17:36:57 +0000