summaryrefslogtreecommitdiff
path: root/drivers/video/pxafb.c
AgeCommit message (Collapse)Author
2012-04-07Merge branch '3.4-rc1' into android-tegra-nv-3.3-rebasedVarun Wadekar
Change-Id: Ib3b69ffc5ac3e07c9cc44cc49e9142088eec477e Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
2011-11-01Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
2011-10-08ARM: pxa: make pxafb_smart_*() empty when not enabledEric Miao
Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-03video: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-04-12ARM: pxafb: Fix access to nonexistent member of pxafb_infoMarek Vasut
In case CONFIG_FB_PXA_OVERLAY is not defined, the pxafb_freq_transition() function tests nonexistent member of pxafb_info (since the member is not part of the structure). Fix this by wraping the test in ifdef, even if I don't really like how the code looks now. The check doesn't have to happen if overlays are disabled at all as the check is always true then. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16ARM: pxafb: don't disable controller on cpufreq transition if overlay in useVasily Khoruzhick
It's not safe to disable controller if overlay(s) is enabled (results in system hang). So we avoid to disable controller in this case. Userspace should choose proper governor to avoid freq changing when overlay is in use, otherwise LCD may blink. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16ARM: pxafb: fix typo in ypos assignmentVasily Khoruzhick
Sascha Hauer <s.hauer@pengutronix.de> pointed that ypos takes value of xpos due to typo. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16ARM: pxafb: fix plane Z-ordering problemVasily Khoruzhick
pxafb_overlay_init is not right place to change Z-ordering, move it to main plane initialization. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16ARM: pxafb: rework pxafb overlay memory managementVasily Khoruzhick
PXAFB overlay memory management is something messy: - it allocates memory dynamically on open/release, and it results in memory allocation failure after ~1h of uptime (system does not have 115k of physically contiguous memory) - in release callback it tries to free memory even if it was not allocated. Also driver touches FDADR1 on main plane reconfiguration, and it can cause problems if overlay1 is enabled. This patch attempts to fix those issues. Patch is based on Russell King's work. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxafb: fix building issue of incorrect referenceEric Miao
Commit "d2a34c1 drivers/video: Move dereference after NULL test" introduced a build error of "fbi->dev->platform_data->smart_update" being unknown type to the compiler, fix this by removing the unnecessary test of 'fbi'. Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16drivers/video: Move dereference after NULL testJulia Lawall
If the NULL test on fbi is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01pxafb: add transparency field to pxafb_mode_info structPieter Grimmerink
This allows to select either RGB565 (transparency 0) or RGBT555 (transparency 1) from the mode info Signed-off-by: Pieter Grimmerink <p.grimmerink@inepro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxafb: use passed fb_var_screeninfo struct in pxafb_pan_display()Sven Neumann
pxafb_pan_display() used to ignore the fb_var_screeninfo parameter. Now pass it to setup_base_frame() instead of pulling default values out of fb_info. And the original patch has an issue of pxafb_pan_display() paying only attention to the 'var' parameter passed in, and Ville Syrjälä pointed out, this is potentially dangerous as user could pass in any other screeninfo parameters as well, and not only such that are relevant for display panning. This is fixed by limiting the arguments actually used to .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Cc: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-12[ARM] pxafb: add accelerator ID for PXA3xx GCUDaniel Mack
Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer conditionally, depending on a new flag in struct pxafb_mach_info. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Dennis Oliver Kropp <dok@directfb.org> Cc: Sven Neumann <s.neumann@raumfeld.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: update pxafb.c to use 'struct dev_pm_ops'Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxafb: use resource_size() functionDaniel Mack
Cleanup only, no function change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-30fbdev: add mutex for fb_mmap lockingKrzysztof Helt
Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21pxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAYDenis V. Lunev
Fixes the warning: drivers/video/pxafb.c: In function 'pxafb_handle_irq': drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1' [akpm@linux-foundation.org: save an ifdef] Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-24Merge branch 'devel' of ↵root
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-03-23Merge branch 'fix' of ↵Eric Miao
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git into devel
2009-03-19[ARM] pxa: fix overlay being un-necessarily initialized on pxa25xEric Miao
pxa25x doesn't support overlay in its LCD controller, this patch adds pxafb_overlay_supported() functions to check the initialization is necessary. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-09[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.hEric Miao
pxa-regs.h and hardware.h are not intended for use directly in driver code, remove those unnecessary references. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-03[ARM] fix lots of ARM __devexit sillynessRussell King
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-29Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-12-29[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devicesEric Miao
PXA27x and later processors support overlay1 and overlay2 on-top of the base framebuffer (although under-neath the base is also possible). They support palette and no-palette RGB formats, as well as YUV formats (only available on overlay2). These overlays have dedicated DMA channels and behave in a similar way as a framebuffer. This heavily simplified and re-structured work is based on the original pxafb_overlay.c (which is pending for mainline merge for a long time). The major problems with this pxafb_overlay.c are (if you are interested in the history): 1. heavily redundant (the control logics for overlay1 and overlay2 are actually identical except for some small operations, which are now abstracted into a 'pxafb_layer_ops' structure) 2. a lot of useless and un-tested code (two workarounds which are now fixed on mature silicons) 3. cursorfb is actually useless, hardware cursor should not be used this way, and the code was actually un-tested for a long time. The code in this patch should be self-explanatory, I tried to add minimum comments. As said, this is basically simplified, there are several things still on the pending list: 1. palette mode is un-supported and un-tested (although re-using the palette code of the base framebuffer is actually very easy now with previous clean-up patches) 2. fb_pan_display for overlay(s) is un-supported 3. the base framebuffer can actually be abstracted by 'pxafb_layer' as well, which will help further re-use of the code and keep a better and consistent structure. (This is the reason I named it 'pxafb_layer' instead of 'pxafb_overlay' or something alike) See Documentation/fb/pxafb.txt for additional usage information. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: cleanup of the timing checking codeEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: cleanup of the color format manipulation codeEric Miao
1. introduce var_to_depth() to calculate the color depth including the transparency bit 2. the conversion from 'fb_var_screeninfo' to LCCR3 BPP bits can be re- used by overlays (in OVLxC1), thus an individual pxafb_var_to_bpp() has been separated out. 3. pxafb_setmode() should really set the color bitfields correctly at begining, introduce a pxafb_set_pixfmt() for this 4. allow user apps to specify color formats within fb_var_screeninfo, and checking of this in pxafb_check_var() has been simplified as below: a) pxafb_var_to_bpp() should pass - which means a basically correct bits_per_pixel and color depth setting b) the RGBT bitfields are then forced into supported values by pxafb_set_pixfmt() Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3Eric Miao
Add the palette format support for LCCR4_PAL_FOR_3, and fix the issue of LCCR4 being never assigned. Also remove the useless pxafb_set_truecolor(). Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: add support for FBIOPAN_DISPLAY by dma brachingEric Miao
dma branching is enabled by extending the current setup_frame_dma() function to allow a 2nd set of frame/palette dma descriptors to be used. As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[] and pxafb_info.fdadr[] are doubled. This allows maximum re-use of the current dma setup code, although the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffsetEric Miao
Note the var->yres_virtual is only re-calculated from the fix.smem_len when text mode acceleration is enabled (which is default), this is due to the issue as Russell suggested below: Previous experience of doing this with the X server and acornfb is that it causes all sorts of problems - it seems to force the X server into assuming that the framebuffer should be panned no matter what settings you ask it for. The recommended workaround (implemented in acornfb) is to only do these kinds of adjustments if text mode acceleration is enabled. IIRC, the X server should be disabling text mode acceleration when it maps the framebuffer. I seem to remember that there are X servers which forget to do that though. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: allow video memory size to be configurableEric Miao
The amount of video memory size is decided according to the following order: 1. <xres> x <yres> x <bits_per_pixel> by default, which is the backward compatible way 2. size specified in platform data 3. size specified in module parameter 'options' string or specified in kernel boot command line (see updated Documentation/fb/pxafb.txt) And now since the memory is allocated from system memory, the pxafb_mmap can be removed and the default fb_mmap() should be working all right. Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA descriptors and palettes, the allocation can be separated cleanly. NOTE: the LCD DMA actually supports chained transfer (i.e. page-based transfers), to simplify the logic and keep the performance (with less TLB misses when accessing from memory mapped user space), the memory is allocated by alloc_pages_*() to ensures it's physical contiguous. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-23Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/am200epd.c arch/arm/mach-pxa/ezx.c
2008-12-17[ARM] pxafb: avoid the racing condition in pxafb_smart_threadEric Miao
fbi->state change shall really be protected by fbi->ctrlr_lock, where the change is sheltered. There is a possibility that pxafb_smart_thread will start update the LCD panel when fbi->state == C_ENABLE, while all other initialization isn't done. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: allow insertion of delay to the smart panel command sequenceEric Miao
Some smart panel requires a delay between command sequences, while PXA LCD controller didn't provide such one, let's emulate this by software. A software delay marker can be inserted into the command sequence, once pxafb_smart_queue() detects this, it flushes the previous commands and delay for a specified number of milliseconds. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: allow better platform configurable smart panel timingEric Miao
For smart panels (LCD panel with internal framebuffer), the following LCCR3 register bits have different meanings than the parallel one: LCCR3_PCP - controls the L_PCLK_WR polarity LCCR3_HSP - controls the L_LCLK_A0 polarity LCCR3_VSP - controls the L_FCLK_RD polarity To keep minimum change to the original parallel timing, the .lcd_conn flags and 'pxafb_mode_info.sync' are re-used to reflect this: LCD_PCLK_EDGE_{RISE,FALL} - configures LCCR3_PCP sync & FB_SYNC_{HOR,VERT}_HIGH_ACT - configures LCCR3_{HSP,VSP} Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: small cleanup of the smart panel codeEric Miao
Group smart panel related code in a more compact fasion, avoid abused usage of #ifdef .. #endif. Also fix the incorrect condition in pxafb_smart_init() to decide if it is a smart panel or not. (should be '&' instead of '|') Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: remove now unused pxafb_setup_gpio() and related stuffsEric Miao
platform should now initialize the pin usage for the LCD controller to correctly work. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxafb: make {backlight,lcd}_power() members of struct pxafb_infoEric Miao
instead of holding them as static pointers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-11pxafb: only initialize the smart panel thread when dealing with a smartpanelEric Miao
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-11pxafb: introduce LCD_TYPE_MASK and use it.Eric Miao
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-08-16[ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specifiedEric Miao
The newly introduced "lcd_conn" field for connected LCD panel type will cause the original code to generate the warnings of incorrect lccr*. This is unnecessary since well encoded LCD_* flags will not generate incorrect combinition of lccr* bits. Skip the check if "lcd_conn" is specified. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-16[ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16Eric Miao
Another fix of inconsistent shift of the LCD_BIAS_ACTIVE_* and LCD_PCLK_EDGE_* is also included. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-16[ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCDEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Alex Osborne <ato@meshy.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-26[ARM] PXA: squash warning in pxafbIan Molton
Fixes a warning about using the wrong type in pxafb.c Signed-off-by: Ian Molton <spyro@f2s.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 09:34:29 +0000