summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2014-02-14video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.Denis Carikli
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-14video: exynos: Fix S6E8AX0 LCD driver build errorSachin Kamat
Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-11OMAPDSS: fix fck field typesTomi Valkeinen
'fck' field in dpi and sdi clock calculation struct is 'unsigned long long', even though it should be 'unsigned long'. This hasn't caused any issues so far. Fix the field's type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-11OMAPDSS: DISPC: decimation rounding fixTomi Valkeinen
The driver uses DIV_ROUND_UP when calculating decimated width & height. For example, when decimating with 3, the width is calculated as: width = DIV_ROUND_UP(width, decim_x); This yields bad results for some values. For example, 800/3=266.666..., which is rounded to 267. When the input width is set to 267, and pixel increment is set to 3, this causes the dispc to read a line of 801 pixels, i.e. it reads a wrong pixel at the end of the line. Even more pressing, the above rounding causes a BUG() in pixinc(), as the value of 801 is used to calculate row increment, leading to a bad value being passed to pixinc(). This patch fixes the decimation by removing the DIV_ROUND_UP()s when calculating width and height for decimation. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-02parisc/sti_console: prefer Linux fonts over built-in ROM fontsHelge Deller
The built-in ROM fonts lack many necessary ASCII characters, which is why it makes sens to prefer the Linux fonts instead if they are available. This makes consoles on STI graphics cards which are not supported by the stifb driver (e.g. Visualize FXe) looks much nicer. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13
2014-01-30drivers/video/backlight/lcd.c: call put_device if device_register failsLevente Kurusa
Currently we kfree the container of the device which failed to register. This is wrong as the last reference is not given up with a put_device call. Also, now that we have put_device() callen, we no longer need the kfree as the new_ld->dev.release function will take care of kfreeing the associated memory. Signed-off-by: Levente Kurusa <levex@linux.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-29Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-29Merge tag 'omapdrm-3.14' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm patches for 3.14 * tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: Enable DT support for DMM drm/omap: fix: change dev_unload order drm/omap: fix: disable encoder before destroying it drm/omap: fix: disconnect devices when omapdrm module is removed drm/omap: fix: Defer probe if an omapdss device requests for it at connect drm/omap: fix (un)registering irqs inside an irq handler Conflicts: drivers/gpu/drm/omapdrm/omap_drv.c
2014-01-27Merge tag 'pwm/for-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The patches for this release cycle include various enhancements (device tree support, better compile coverage, ...) for existing drivers. There is a new driver for Atmel SoCs. Various drivers as well as the sysfs support received minor fixes and cleanups" * tag 'pwm/for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: tiecap: Remove duplicate put_sync call pwm: tiehrpwm: use dev_err() instead of pr_err() pwm: pxa: remove unnecessary space before tabs pwm: ep93xx: split module author names pwm: use seq_puts() instead of seq_printf() pwm: atmel-pwm: Do not unprepare clock after successful registration of: Add Atmel PWM controller device tree binding pwm: atmel-pwm: Add Atmel PWM controller driver backlight: pwm_bl: Remove error message upon devm_kzalloc() failure pwm: pca9685: depends on I2C rather than REGMAP_I2C pwm: renesas-tpu: Enable driver compilation with COMPILE_TEST pwm: jz4740: Use devm_clk_get() pwm: jz4740: Pass device to clk_get() pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macro pwm: pxa: Add device tree support
2014-01-24Merge tag 'fbdev-3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "This is a rather boring pull request. There is one new fb driver, OpenCores VGA/LCD, but other than that it's just minor cleanups and fixes" * tag 'fbdev-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (51 commits) i810: delete useless variable video: add OpenCores VGA/LCD framebuffer driver video/logo: Remove MIPS-specific include section tgafb: potential NULL dereference in init video: mmp: Using plain integer as NULL pointer video: mmp: delete a stray mutex_unlock() video: amba-clcd: Make CLCD driver available on more platforms video: Replace local macro with PCI standard macro fbmem: really support wildcard video=options for all fbdev drivers video: vgacon: Don't build on arm64 video: mx3fb: Allow blocking during framebuffer allocation fbcon: Fix memory leak in fbcon_exit(). fbcon: trivial optimization for fbcon_exit video: pxa168fb: Cleanup pxa168fb.h file video: pxa: Cleanup video-pxafb.h header video: msm: Cleanup video-msm_fb.h header video: ep93xx: Cleanup video-ep93xx.h header video: mxsfb: fix broken videomode selection video: mxsfb: convert pr_debug()/dev_dbg() to pr_err()/dev_err() for error messages video: vmlfb: remove unnecessary pci_set_drvdata() ...
2014-01-23backlight: lp8788: remove unnecessary parenthesesJingoo Han
Remove unnecessary parentheses in order to fix the following checkpatch error. ERROR: return is not a function, parentheses are not required Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: lp855x: remove unnecessary parenthesesJingoo Han
Remove unnecessary parentheses in order to fix the following checkpatch error. ERROR: return is not a function, parentheses are not required Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: kb3886_bl: fix incorrect placement of __initdata markerJingoo Han
The __initdata marker can be virtually anywhere on the line, EXCEPT right after "struct". The preferred location is before the "=" sign if there is one, or before the trailing ";" otherwise. It also fixes the following chechpatch warning. WARNING: __initdata should be placed after kb3886bl_device_table[] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: tosa: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: l4f00242t03: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: jornada720: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: tosa: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: ot200_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: omap1: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: hp680_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23backlight: jornada720: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23drivers/video/aty/aty128fb.c: fix a warning pertaining to the aty128fb ↵David Howells
backlight variable Fix the following warning in the aty128fb driver: drivers/video/aty/aty128fb.c:363:12: warning: 'backlight' defined but not used [-Wunused-variable] static int backlight = 0; ^ as the variable's value is only read if CONFIG_FB_ATY128_BACKLIGHT=y. The variable is also set if MODULE is unset[*]. [*] I wonder if the conditional wrapper around aty128fb_setup() should be using CONFIG_MODULE rather than MODULE. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22Merge tag 'stable/for-linus-3.14-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "Two major features that Xen community is excited about: The first is event channel scalability by David Vrabel - we switch over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO queue with priorities. This lets us be able to handle more events, have lower latency, and better scalability. Good stuff. The other is PVH by Mukesh Rathor. In short, PV is a mode where the kernel lets the hypervisor program page-tables, segments, etc. With EPT/NPT capabilities in current processors, the overhead of doing this in an HVM (Hardware Virtual Machine) container is much lower than the hypervisor doing it for us. In short we let a PV guest run without doing page-table, segment, syscall, etc updates through the hypervisor - instead it is all done within the guest container. It is a "hybrid" PV - hence the 'PVH' name - a PV guest within an HVM container. The major benefits are less code to deal with - for example we only use one function from the the pv_mmu_ops (which has 39 function calls); faster performance for syscall (no context switches into the hypervisor); less traps on various operations; etc. It is still being baked - the ABI is not yet set in stone. But it is pretty awesome and we are excited about it. Lastly, there are some changes to ARM code - you should get a simple conflict which has been resolved in #linux-next. In short, this pull has awesome features. Features: - FIFO event channels. Key advantages: support for over 100,000 events (2^17), 16 different event priorities, improved fairness in event latency through the use of FIFOs. - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized disk and network, paravirtualized interrupts and timers, no emulated devices of any kind (and thus no qemu), no BIOS or legacy boot — but instead of requiring PV MMU, it uses the HVM hardware extensions to virtualize the pagetables, as well as system calls and other privileged operations." (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum") Bug-fixes: - Fixes in balloon driver (refactor and make it work under ARM) - Allow xenfb to be used in HVM guests. - Allow xen_platform_pci=0 to work properly. - Refactors in event channels" * tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits) xen/pvh: Set X86_CR0_WP and others in CR0 (v2) MAINTAINERS: add git repository for Xen xen/pvh: Use 'depend' instead of 'select'. xen: delete new instances of __cpuinit usage xen/fb: allow xenfb initialization for hvm guests xen/evtchn_fifo: fix error return code in evtchn_fifo_setup() xen-platform: fix error return code in platform_pci_init() xen/pvh: remove duplicated include from enlighten.c xen/pvh: Fix compile issues with xen_pvh_domain() xen: Use dev_is_pci() to check whether it is pci device xen/grant-table: Force to use v1 of grants. xen/pvh: Support ParaVirtualized Hardware extensions (v3). xen/pvh: Piggyback on PVHVM XenBus. xen/pvh: Piggyback on PVHVM for grant driver (v4) xen/grant: Implement an grant frame array struct (v3). xen/grant-table: Refactor gnttab_init xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init. xen/pvh: Piggyback on PVHVM for event channels (v2) xen/pvh: Update E820 to work with PVH (v2) xen/pvh: Secondary VCPU bringup (non-bootup CPUs) ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Zorro bus cleanups and UAPI revival - Bootinfo cleanups and UAPI revival - Kexec support - Memory size reductions and bug fixes for multi-platform kernels - Polled interrupt support for Atari EtherNAT, EtherNEC and NetUSBee - Machine-specific random_get_entropy() - Defconfig updates and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (46 commits) m68k/mac: Make SCC reset work more reliably m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts m68k: Update defconfigs for v3.13-rc1 m68k/defconfig: Enable EARLY_PRINTK m68k/mm: kmap spelling/grammar fixes m68k: Convert arch/m68k/kernel/traps.c to pr_*() m68k: Convert arch/m68k/mm/fault.c to pr_*() m68k/mm: Check for mm != NULL in do_page_fault() debug code m68k/defconfig: Disable /sbin/hotplug fork-bomb by default m68k/atari: Hide RTC_PORT() macro from rtc-cmos m68k/amiga,atari: Fix specifying multiple debug= parameters m68k/defconfig: Use ext4 for ext2/ext3 file systems m68k: Add support to export bootinfo in procfs m68k: Add kexec support m68k/mac: Mark Mac IIsi ADB driver BROKEN m68k/amiga: Provide mach_random_get_entropy() m68k: Add infrastructure for machine-specific random_get_entropy() m68k/atari: Call paging_init() before nf_init() m68k: Remove superfluous inclusions of <asm/bootinfo.h> m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h> ...
2014-01-20Merge branches '3.14/fbdev', '3.14/dss-misc' and '3.14/dss-fclk' into for-nextTomi Valkeinen
Merge fbdev topic branches
2014-01-17i810: delete useless variableJulia Lawall
Delete a variable that is at most only assigned to a constant, but never used otherwise. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; identifier i; constant c; @@ -T i; <... when != i -i = c; ...> // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: add OpenCores VGA/LCD framebuffer driverStefan Kristiansson
This adds support for the VGA/LCD core available from OpenCores: http://opencores.org/project,vga_lcd The driver have been tested together with both OpenRISC and ARM (socfpga) processors. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video/logo: Remove MIPS-specific include sectionGeert Uytterhoeven
Since commit 41702d9a4fffa9e25b2ad9d4af09b3013fa155e1 ("logo.c: get rid of mips_machgroup") there's no longer a need to include <asm/bootinfo.h> on MIPS. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17tgafb: potential NULL dereference in initDan Carpenter
Static checkers complain that there are paths where "tga_type_name" can be NULL. I've re-arranged the code slightly so that's impossible. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mmp: Using plain integer as NULL pointerDan Carpenter
Sparse complains here: drivers/video/mmp/core.c:33:16: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mmp: delete a stray mutex_unlock()Dan Carpenter
We aren't holding the disp_lock so we shouldn't release it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: amba-clcd: Make CLCD driver available on more platformsMark Brown
The CLCD driver is used on ARM reference models for ARMv8 so add ARM64 to the list of dependencies. The driver also has no build time dependencies on ARM (stubs are provided for ARM-specific DMA functions in the code) so make it available with COMPILE_TEST in order to maximise build coverage. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: Replace local macro with PCI standard macroYijing Wang
Replace local macro TGA_BUS_PCI with PCI standard marco dev_is_pci(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17fbmem: really support wildcard video=options for all fbdev driversOlaf Hering
Documentation/fb/modedb.txt states that video=option should be considered a global option. But video_setup and fb_get_options are not coded that way. Instead its required to boot with video=driver:option to set a given option in drvier. This is cumbersome because it requires to know in advance which driver will be active for a given board/kernel. The following patch implements the documented catchall for the fbdev drivers. It is now possible to boot with video=XxY without the need to know the active driver in advance. The specific case it tries to fix is syslinux in the SUSE installer which offers a menu to set a display resolution. Right now this just appends the vga= option the kernel. But in addition to vga= it should be possible to pass a generic video=XxY for all framebuffer/drm drivers. With this change forcing a certain window size of VM displays is now much easier. Today the video= option is stored in a global fb_mode_option. But unfortunately only drm uses it. Note: this change introduces a small memleak if video=option is actually used because fb_mode_option is const. Most drivers use strsep to get to individual options. This could be fixed in a followup patch which always releases the option string in every caller of fb_get_options. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: vgacon: Don't build on arm64Mark Brown
arm64 is unlikely to have a VGA console and does not export screen_info causing build failures if the driver is build, for example in all*config. Add a dependency on !ARM64 to prevent this. This list is getting quite long, it may be easier to depend on a symbol which architectures that do support the driver can select. Signed-off-by: Mark Brown <broonie@linaro.org> [tomi.valkeinen@ti.com: moved && to first modified line] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mx3fb: Allow blocking during framebuffer allocationSascha Hauer
No need to allocate the framebuffer from the atomic pool, we are not in interrupt context. Adding GFP_KERNEL to the framebuffer allocation allows to use the much bigger CMA pool to allocate the framebuffer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17fbcon: Fix memory leak in fbcon_exit().Masami Ichikawa
kmemleak reported a memory leak as below. unreferenced object 0xffff880036ca84c0 (size 16): comm "swapper/0", pid 1, jiffies 4294877407 (age 4434.633s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ................ backtrace: [<ffffffff814ed01e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8118913c>] __kmalloc+0x1fc/0x290 [<ffffffff81302c9e>] bit_cursor+0x24e/0x6c0 [<ffffffff812ff2f4>] fbcon_cursor+0x154/0x1d0 [<ffffffff813675d8>] hide_cursor+0x28/0xa0 [<ffffffff81368acf>] update_region+0x6f/0x90 [<ffffffff81300268>] fbcon_switch+0x518/0x550 [<ffffffff813695b9>] redraw_screen+0x189/0x240 [<ffffffff8136a0e0>] do_bind_con_driver+0x360/0x380 [<ffffffff8136a6e4>] do_take_over_console+0x114/0x1c0 [<ffffffff812fdc83>] do_fbcon_takeover+0x63/0xd0 [<ffffffff813023e5>] fbcon_event_notify+0x605/0x720 [<ffffffff81501dcc>] notifier_call_chain+0x4c/0x70 [<ffffffff81087f8d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff81087fc6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff812f201b>] fb_notifier_call_chain+0x1b/0x20 In this case ops->cursor_state.mask is allocated in bit_cursor() but not freed in fbcon_exit(). So, fbcon_exit() needs to free buffer in its process. In the case, fbcon_exit() was called from fbcon_deinit() when driver called remove_conflicting_framebuffers(). Signed-off-by: Masami Ichikawa <masami256@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17fbcon: trivial optimization for fbcon_exitWang YanQing
Break out as soon as we find a mapped entry con2fb_map. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mxsfb: fix broken videomode selectionLothar Waßmann
Currently the driver re-implements the code found in of_get_videomode() except for the fact that the latter honors the 'native-mode' property to select a spcific video timing from the list of possible timings. The driver builds up a list of all video timings, but uses only the last mode from the list anyway. While building the list it incorrectly OR's the 'pixelclk-active' and 'de-active' flags of all modes into single flags, possibly leading to a wrong pixelclock or data-enable polarity setting. Fix this by using the of_get_videomode() directly with the OF_USE_NATIVE_MODE flag. Since all current dts files only have one entry in their display-timings node, this bug was not apparent and the fix does not change the driver's behaviour for the current users. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mxsfb: convert pr_debug()/dev_dbg() to pr_err()/dev_err() for error ↵Lothar Waßmann
messages Make the messages that are printed in case of fatal errors actually visible to the user without having to recompile the driver with debugging enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: vmlfb: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: rivafb: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: nvidiafb: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: asiliantfb: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17fbdev: sh_mobile_lcdcfb: Don't use plain 0 as NULL pointerLaurent Pinchart
This fixes a sparse warning. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-14OMAPDSS: DISPC: Fix 34xx overlay scaling calculationIvaylo Dimitrov
commit 7faa92339bbb1e6b9a80983b206642517327eb75 OMAPDSS: DISPC: Handle synclost errors in OMAP3 introduces limits check to prevent SYNCLOST errors on OMAP3. However, it misses the logic found in Nokia kernels that is needed to correctly calculate whether 3 tap or 5 tap rescaler to be used as well as the logic to fallback to 3 taps if 5 taps clock results in too tight horizontal timings. Without that patch "horizontal timing too tight" errors are seen when a video with resolution above 640x350 is tried to be played. The patch is a forward-ported logic found in Nokia N900 and N9/50 kernels. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13OMAPDSS: panel-acx565akm: clean-up lockingTomi Valkeinen
The locking in the acx565akm panel driver was getting too complex. Clean it up by making new functions, acx565akm_bl_get_intensity_locked and acx565akm_bl_update_status_locked, which are called by the backlight subsystem. This way the non-locked versions can be called by the panel's other funcs, simplifying the lock management. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13OMAPDSS: DISPC: Preload more data in pipeline DMAs for OMAP4+ SoCsArchit Taneja
DISPC pipeline DMAs preload some bytes of pixel data in the vertical blanking region before the start of each frame. The preload ensures the pipeline doesn't underflow when the active region of the display starts. DISPC_GFX/VIDp_PRELOAD registers allow us to program how many bytes of data should be preloaded for each pipeline. Calculating a precise preload value would be a complex function of the pixel clock of the connected display, the vertical blanking duration and the interconnect traffic at that instance. If the register is left untouched, a default value is preloaded. We observe underflows for OMAP4+ SoCs for certain bandwidth intensive use cases with many other initiators active, and in situations where memory access isn't very efficient(like accessing Tiler mapped buffers and EMIF configured in non-interleaved more). The cause of the underflow is because the default preload value isn't sufficient for the DMA to reach a steady state. We configure the PRELOAD register such that the pipelines preload data up to the high threshold of the FIFO. Preloading lot of data for older SoCs can have a negative impact. Due to slower interconnects, it's possible that the DISPC DMA cannot preload up to the high threshold within the vertical blanking region of the panel. We leave the PRELOAD registers to their reset values since we haven't faced underflows with these SoCs because of low value of PRELOAD. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>