summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2012-10-07Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch updates from Greg Ungerer: "Most of it is a cleanup of the ColdFire hardware header files. We have had a few occurrances of bugs caused by inconsistent definitions of peripheral addresses. These patches make them all consistent, and also clean out a bunch of old crap. Overall we remove about 1000 lines." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (27 commits) m68knommu: fix inconsistent formating in ColdFire 5407 definitions m68knommu: fix inconsistent formating in ColdFire 5307 definitions m68knommu: fix inconsistent formating in ColdFire 527x definitions m68knommu: fix inconsistent formating in ColdFire 5272 definitions m68knommu: fix inconsistent formating in ColdFire 523x definitions m68knommu: clean up ColdFire 54xx General Timer definitions m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x m68knommu: move ColdFire slice timer address defiens to 54xx header m68knommu: use read/write IO access functions in ColdFire m532x setup code m68knommu: modify ColdFire 532x GPIO register definitions to be consistent m68knommu: remove a lot of unsed definitions for 532x ColdFire m68knommu: use definitions for the ColdFire 528x FEC multi-function pins m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x m68knommu: remove unused ColdFire 5282 register definitions m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses m68knommu: make remaining ColdFire 5272 register definitions absolute addresses m68knommu: make ColdFire Park and Assignment register definitions absolute addresses m68knommu: make ColdFire Chip Select register definitions absolute addresses ...
2012-10-05Merge tag 'mfd-3.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-09-27m68knommu: clean up ColdFire 54xx General Timer definitionsGreg Ungerer
Convert the ColdFire 54xx CPU General Timer register address definitions to include the MCF_MBAR peripheral region offset. This makes them consistent with all other 54xx address register definitions (in m54xxsim.h). The goal is to reduce different definitions used (some including offsets and others not) causing bugs when used incorrectly. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-16Merge tag 'omap-cleanup-sparseirq-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains changes needed to make omap2+ work properly with sparse IRQ. It also removes dependencies to mach/hardware.h. These help moving things towards ARM single zImage support. This branch is based on a commit in tty-next branch with omap-devel-gpmc-fixed-for-v3.7 and cleanup-omap-tags-for-v3.7 merged in to keep things compiling and sort out some merge conflicts. * tag 'omap-cleanup-sparseirq-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: Move SoC specific headers from plat to mach for omap1 ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ ARM: OMAP: Remove unused old gpio-switch.h ARM: OMAP1: Move plat/irqs.h to mach/irqs.h ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ ARM: OMAP2+: Prepare for irqs.h removal W1: OMAP HDQ1W: Remove dependencies to mach/hardware.h Input: omap-keypad: Remove dependencies to mach includes ARM: OMAP: Move gpio.h to include/linux/platform_data ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end ARM: OMAP2+: Remove unused nand_irq for GPMC ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.c ARM: OMAP1: Define OMAP1_INT_I2C locally ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.h
2012-09-16mfd: lpc_ich: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston
This patch adds the Watchdog Timer Device IDs for the Intel Lynx Point-LP PCH. The Device IDs are defined in drivers/mfd/lpc_ich.c Signed-off-by: James Ralston <james.d.ralston@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-12Merge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanupOlof Johansson
* 'clk' of git://github.com/hzhuang1/linux: ARM: mmp: remove unused definition in APBC and APMU ARM: mmp: move mmp2 clock definition to separated file arm: mmp: move pxa910 clock definition to separated file arm: mmp: move pxa168 clock definition to separated file arm: mmp: make private clock definition exclude from common clock + Linux 3.6-rc4
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-11Merge branch 'ks8695/timer' into next/cleanupOlof Johansson
* ks8695/timer: watchdog: ks8695: sink registers into driver
2012-09-11watchdog: ks8695: sink registers into driverLinus Walleij
Commit 70adc3f32adc2fb90b0107c020678588e4cf9f51 "ARM: ks8695: merge the timer header into the timer driver" accidentally broke the ks8695 watchdog since it was using the timer registers in watchdog mode. Perform the same operation here: push the registers down into the driver, so it is self-contained, and we can keep depopulating the <mach/*> namespace. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-11watchdog/mpc8xxx: add a const qualifierArnd Bergmann
This prepares *of_device_id.data becoming const. Without this change the following warning would occur: drivers/watchdog/mpc8xxx_wdt.c: In function 'mpc8xxx_wdt_probe': drivers/watchdog/mpc8xxx_wdt.c:203:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> [ukl: split Arnd's patch by driver and add changelog] Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-10watchdog: move the dereference below the NULL testWei Yongjun
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-09-10hpwdt: Fix kdump issue in hpwdtToshi Kani
kdump can be interrupted by watchdog timer when the timer is left activated on the crash kernel. Changed the hpwdt driver to disable watchdog timer at boot-time. This assures that watchdog timer is disabled until /dev/watchdog is opened, and prevents watchdog timer to be left running on the crash kernel. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Lisa Mitchell <lisa.mitchell@hp.com> Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2012-08-29watchdog: da9052: Remove duplicate inclusion of delay.hSachin Kamat
delay.h header file was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-08-26ARM: mach-pnx4008: Remove architectureRoland Stigge
This patch removes the ARM architecture mach-pnx4008. No direct support or user feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc maintainers. Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-08-17booke/wdt: some ioctls do not return values properlyTiejun Chen
Fix some booke wdt ioctls return value error. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-27Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linusRussell King
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog changes from Wim Van Sebroeck: - conversion of iTCO_wdt and orion_wdt to the generic watchdog API - uses module_platform_driver() for s3c2410_wdt - Adds support for Jetway JNF99 Motherboard - various fixes * git://www.linux-watchdog.org/linux-watchdog: watchdog: orion_wdt: Convert driver to watchdog core watchdog: s3c2410_wdt: Use module_platform_driver() watchdog: sch311x_wdt: Fix Polarity when starting watchdog Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state. watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe() watchdog: bcm63xx_wdt: fix driver section mismatch watchdog: iTCO_wdt.c: convert to watchdog core char/ipmi: remove local ioctl defines replaced by generic ones watchdog: xilinx: Read clock frequency directly from DT node watchdog: coh901327_wdt: use clk_prepare/unprepare watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboard
2012-07-23Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Notable highlights: - iommu improvements from Anton removing the per-iommu global lock in favor of dividing the DMA space into pools, each with its own lock, and hashed on the CPU number. Along with making the locking more fine grained, this gives significant improvements in multiqueue networking scalability. - Still from Anton, we know provide a vdso based variant of getcpu which makes sched_getcpu with the appropriate glibc patch something like 18 times faster. - More anton goodness (he's been busy !) in other areas such as a faster __clear_user and copy_page on P7, various perf fixes to improve sampling quality, etc... - One more step toward removing legacy i2c interfaces by using new device-tree based probing of platform devices for the AOA audio drivers - A nice series of patches from Michael Neuling that helps avoiding confusion between register numbers and litterals in assembly code, trying to enforce the use of "%rN" register names in gas rather than plain numbers. - A pile of FSL updates - The usual bunch of small fixes, cleanups etc... You may spot a change to drivers/char/mem. The patch got no comment or ack from outside, it's a trivial patch to allow the architecture to skip creating /dev/port, which we use to disable it on ppc64 that don't have a legacy brige. On those, IO ports 0...64K are not mapped in kernel space at all, so accesses to /dev/port cause oopses (and yes, distros -still- ship userspace that bangs hard coded ports such as kbdrate)." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/mpic: Create a revmap with enough entries for IPIs and timers Remove stale .rej file powerpc/iommu: Fix iommu pool initialization powerpc/eeh: Check handle_eeh_events() return value powerpc/85xx: Add phy nodes in SGMII mode for MPC8536/44/72DS & P2020DS powerpc/e500: add paravirt QEMU platform powerpc/mpc85xx_ds: convert to unified PCI init powerpc/fsl-pci: get PCI init out of board files powerpc/85xx: Update corenet64_smp_defconfig powerpc/85xx: Update corenet32_smp_defconfig powerpc/85xx: Rename P1021RDB-PC device trees to be consistent powerpc/watchdog: move booke watchdog param related code to setup-common.c sound/aoa: Adapt to new i2c probing scheme i2c/powermac: Improve detection of devices from device-tree powerpc: Disable /dev/port interface on systems without an ISA bridge of: Improve prom_update_property() function powerpc: Add "memory" attribute for mfmsr() powerpc/ftrace: Fix assembly trampoline register usage powerpc/hw_breakpoints: Fix incorrect pointer access powerpc: Put the gpr save/restore functions in their own section ...
2012-07-23watchdog: orion_wdt: Convert driver to watchdog coreAxel Lin
Convert orion_wdt driver to use watchdog framework API. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: s3c2410_wdt: Use module_platform_driver()Sachin Kamat
module_platform_driver() replaces module_init() and module_exit() and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: sch311x_wdt: Fix Polarity when starting watchdogWim Van Sebroeck
Some motherboards like the Advantech ARK3400 documentation use a non-inverted GPIO pin. We fix this by assuming that the BIOS will set the Polarity bit for the GPIO correctly at startup and we keep the Bit-setting intact when we start and stop the watchdog. Reported-by: Jean-François Deverge <jf.deverge@gmail.com> Signed-off-by: Dave Mueller <d.mueller@elsoft.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck ↵Lokesh Vutla
intransition state. OMAP watchdog driver is adapted to runtime PM like a general device driver but it is not appropriate. It is causing couple of functional issues. 1. On OMAP4 SYSCLK can't be gated, because of issue with WDTIMER2 module, which constantly stays in "in transition" state. Value of register CM_WKUP_WDTIMER2_CLKCTRL is always 0x00010000 in this case. Issue occurs immediately after first idle, when hwmod framework tries to disable WDTIMER2 functional clock - "wd_timer2_fck". After this module falls to "in transition" state, and SYSCLK gating is blocked. 2. Due to runtime PM, watchdog timer may be completely disabled. In current code base watchdog timer is not disabled only because of issue 1. Otherwise state of WDTIMER2 module will be "Disabled", and there will be no interrupts from omap_wdt. In other words watchdog will not work at all. Watchdong is a special IP and it should not be disabled otherwise purpose of it itself is defeated. Watchdog functional clock should never be disabled. This patch updates the runtime PM handling in driver so that runtime PM is limited only during probe/shutdown and suspend/resume. The patch fixes issue 1 and 2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe()Gerard Snitselaar
ie6xx_wdt_probe() calls ie6xx_wdt_debugfs_exit() as part of it's error cleanup path, and ie6xx_wdt_debugfs_exit() is currently annotated __devexit. Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: bcm63xx_wdt: fix driver section mismatchFlorian Fainelli
bcm63xx_wdt was used as a platform_driver but was not suffixed with _driver, thus causing section mismatches, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: iTCO_wdt.c: convert to watchdog coreWim Van Sebroeck
This patch converts the iTCO_wdt watchdog driver to use the generic watchdog framework. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: xilinx: Read clock frequency directly from DT nodeMichal Simek
Do not use clock-frequency property from parent node. Use it from watchdog node. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-By: Alejandro Cabrera <acabrera@udio.cujae.edu.cu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: coh901327_wdt: use clk_prepare/unprepareLinus Walleij
Make sure we prepare/unprepare the COH901327 watchdog timer as is required by the clk API especially if you use common clock. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by : Pankaj Jangra <jangra.pankaj9@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboardJustin Wheeler
The Jetway JNF99 motherboard features a F71869 SuperIO chip, but its watchdog chipset ID appears to be 1007 (as opposed to 0814). Some testing confirmed it behaves the exact same as 0814. So add this chipset ID to the module's ID list so that the Fintek watchdog driver can correctly identify and access it. Signed-off-by: Justin Wheeler <jwheeler@datademons.com> Acked-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-10powerpc/watchdog: replace CONFIG_FSL_BOOKE with CONFIG_PPC_FSL_BOOK3EShaohui Xie
CONFIG_FSL_BOOKE is only defined in 32-bit, CONFIG_PPC_FSL_BOOK3E is defined in both 32-bit and 64-bit, so use CONFIG_PPC_FSL_BOOK3E to make driver work in 32-bit & 64-bit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-09ARM: sa11x0/pxa: convert OS timer registers to IOMEMRussell King
Make the OS timer registers have IOMEM like properities so they can be passed to readl_relaxed/writel_relaxed() et.al. rather than being straight volatile dereferences. Add linux/io.h includes where required. linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c, arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c from Arnd. This fixes these warnings: arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init': arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type arch/arm/mach-pxa/time.c: In function 'pxa_timer_init': arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-09watchdog: omap_wdt: add device tree supportXiao Jiang
Add device table for omap_wdt to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-28watchdog: core: fix WDIOC_GETSTATUS return valueWim Van Sebroeck
In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: hpwdt: Unregister NMI events on exit.Mingarelli, Thomas
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: iTCO_wdt: add platform driver module aliasJan Beulich
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-20Viresh has movedViresh Kumar
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30watchdog: iTCO_wdt.c: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/watchdog/iTCO_wdt.c:577:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:594:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:600:2: warning: format '%04llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: sp805_wdt: Add clk_{un}prepare supportViresh Kumar
clk_{un}prepare() routines are required for required on some platforms to run part of clk enable/disable() routines from contexts that can schedule. This patch adds support for these routines in sp805 driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: sp805_wdt: convert to watchdog coreViresh Kumar
This patch converts existing sp805 watchdog driver to use already in place common infrastructure present in watchdog core. With this lot of code goes away. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30Watchdog: DA9052/53 PMIC watchdog supportAshish Jangam
This driver adds support for the watchdog functionality provided by the Dialog Semiconductor DA9052 PMIC chip. Tested on samsung smdkv6410 and i.mx53 QS boards. Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add support for dynamically allocated watchdog_device structsHans de Goede
If a driver's watchdog_device struct is part of a dynamically allocated struct (which it often will be), merely locking the module is not enough, even with a drivers module locked, the driver can be unbound from the device, examples: 1) The root user can unbind it through sysfd 2) The i2c bus master driver being unloaded for an i2c watchdog I will gladly admit that these are corner cases, but we still need to handle them correctly. The fix for this consists of 2 parts: 1) Add ref / unref operations, so that the driver can refcount the struct holding the watchdog_device struct and delay freeing it until any open filehandles referring to it are closed 2) Most driver operations will do IO on the device and the driver should not do any IO on the device after it has been unbound. Rather then letting each driver deal with this internally, it is better to ensure at the watchdog core level that no operations (other then unref) will get called after the driver has called watchdog_unregister_device(). This actually is the bulk of this patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add Locking supportHans de Goede
This patch fixes some potential multithreading issues, despite only allowing one process to open the /dev/watchdog device, we can still get called multiple times at the same time, since a program could be using thread, or could share the fd after a fork. This causes 2 potential problems: 1) watchdog_start / open do an unlocked test_n_set / test_n_clear, if these 2 race, the watchdog could be stopped while the active bit indicates it is running or visa versa. 2) Most watchdog_dev drivers probably assume that only one watchdog-op will get called at a time, this is not necessary true atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: watchdog_dev: Rewrite wrapper codeHans de Goede
Rewrite and extend the wrapper code so that we can easily introduce locking (this to be able to prevent potential multithreading issues). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: use dev_ functionsAlan Cox
While they are registered all our watchdogs now have a valid device object so we can in turn use that to report problems nicely. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: create all the proper device filesAlan Cox
Create the watchdog class and it's associated devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>