summaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2014-02-12Merge tag 'stable/for-linus-3.14-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "This has an healthy amount of code being removed - which we do not use anymore (the only user of it was ia64 Xen which had been removed already). The other bug-fixes are to make Xen ARM be able to use the new event channel mechanism and proper export of header files to user-space. Summary: - Fix ARM and Xen FIFO not working. - Remove more Xen ia64 vestigates. - Fix UAPI missing Xen files" * tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ia64/xen: Remove Xen support for ia64 even more xen: install xen/gntdev.h and xen/gntalloc.h xen/events: bind all new interdomain events to VCPU0
2014-02-11ia64/xen: Remove Xen support for ia64 even morePaul Bolle
Commit d52eefb47d4e ("ia64/xen: Remove Xen support for ia64") removed the Kconfig symbol XEN_XENCOMM. But it didn't remove the code depending on that symbol. Remove that code now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-11xen/events: bind all new interdomain events to VCPU0David Vrabel
Commit fc087e10734a4d3e40693fc099461ec1270b3fff (xen/events: remove unnecessary init_evtchn_cpu_bindings()) causes a regression. The kernel-side VCPU binding was not being correctly set for newly allocated or bound interdomain events. In ARM guests where 2-level events were used, this would result in no interdomain events being handled because the kernel-side VCPU masks would all be clear. x86 guests would work because the irq affinity was set during irq setup and this would set the correct kernel-side VCPU binding. Fix this by properly initializing the kernel-side VCPU binding in bind_evtchn_to_irq(). Reported-and-tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-05Merge tag 'stable/for-linus-3.14-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes: - Revert "xen/grant-table: Avoid m2p_override during mapping" as it broke Xen ARM build. - Fix CR4 not being set on AP processors in Xen PVH mode" * tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: set CR4 flags for APs Revert "xen/grant-table: Avoid m2p_override during mapping"
2014-02-03Revert "xen/grant-table: Avoid m2p_override during mapping"Konrad Rzeszutek Wilk
This reverts commit 08ece5bb2312b4510b161a6ef6682f37f4eac8a1. As it breaks ARM builds and needs more attention on the ARM side. Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31Merge tag 'stable/for-linus-3.14-rc0-late-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "Bug-fixes for the new features that were added during this cycle. There are also two fixes for long-standing issues for which we have a solution: grant-table operations extra work that was not needed causing performance issues and the self balloon code was too aggressive causing OOMs. Details: - Xen ARM couldn't use the new FIFO events - Xen ARM couldn't use the SWIOTLB if compiled as 32-bit with 64-bit PCIe devices. - Grant table were doing needless M2P operations. - Ratchet down the self-balloon code so it won't OOM. - Fix misplaced kfree in Xen PVH error code paths" * tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pages drivers: xen: deaggressive selfballoon driver xen/grant-table: Avoid m2p_override during mapping xen/gnttab: Use phys_addr_t to describe the grant frame base address xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t) arm/xen: Initialize event channels earlier
2014-01-31drivers: xen: deaggressive selfballoon driverBob Liu
Current xen-selfballoon driver is too aggressive which may cause OOM be triggered more often. Eg. this bug reported by James: https://lkml.org/lkml/2013/11/21/158 There are two mainly reasons: 1) The original goal_page didn't consider some pages used by kernel space, like slab pages and pages used by device drivers. 2) The balloon driver may not give back memory to guest OS fast enough when the workload suddenly aquries a lot of physical memory. In both cases, the guest OS will suffer from memory pressure and OOM may be triggered. The fix is make xen-selfballoon driver not that aggressive by adding extra 10% of total ram pages to goal_page. It's more valuable to keep the guest system reliable and response faster than balloon out these 10% pages to XEN. Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-31xen/grant-table: Avoid m2p_override during mappingZoltan Kiss
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: David Vrabel <david.vrabel@citrix.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-30xen/gnttab: Use phys_addr_t to describe the grant frame base addressJulien Grall
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT is enabled). We can't assume that the grant frame base address will always fits in an unsigned long. Use phys_addr_t instead of unsigned long as argument for gnttab_setup_auto_xlat_frames. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-30xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t)Ian Campbell
The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address. This can happen in practice on ARM where foreign pages can be above 4GB even though the local kernel does not have LPAE page tables enabled (which is totally reasonable if the guest does not itself have >4GB of RAM). In this case the kernel still maps the foreign pages at a phys addr below 4G (as it must) but the resulting DMA address (returned by the grant map operation) is much higher. This is analogous to a hardware device which has its view of RAM mapped up high for some reason. This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM systems with more than 4GB of RAM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-22Merge tag 'stable/for-linus-3.14-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "Two major features that Xen community is excited about: The first is event channel scalability by David Vrabel - we switch over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO queue with priorities. This lets us be able to handle more events, have lower latency, and better scalability. Good stuff. The other is PVH by Mukesh Rathor. In short, PV is a mode where the kernel lets the hypervisor program page-tables, segments, etc. With EPT/NPT capabilities in current processors, the overhead of doing this in an HVM (Hardware Virtual Machine) container is much lower than the hypervisor doing it for us. In short we let a PV guest run without doing page-table, segment, syscall, etc updates through the hypervisor - instead it is all done within the guest container. It is a "hybrid" PV - hence the 'PVH' name - a PV guest within an HVM container. The major benefits are less code to deal with - for example we only use one function from the the pv_mmu_ops (which has 39 function calls); faster performance for syscall (no context switches into the hypervisor); less traps on various operations; etc. It is still being baked - the ABI is not yet set in stone. But it is pretty awesome and we are excited about it. Lastly, there are some changes to ARM code - you should get a simple conflict which has been resolved in #linux-next. In short, this pull has awesome features. Features: - FIFO event channels. Key advantages: support for over 100,000 events (2^17), 16 different event priorities, improved fairness in event latency through the use of FIFOs. - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized disk and network, paravirtualized interrupts and timers, no emulated devices of any kind (and thus no qemu), no BIOS or legacy boot — but instead of requiring PV MMU, it uses the HVM hardware extensions to virtualize the pagetables, as well as system calls and other privileged operations." (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum") Bug-fixes: - Fixes in balloon driver (refactor and make it work under ARM) - Allow xenfb to be used in HVM guests. - Allow xen_platform_pci=0 to work properly. - Refactors in event channels" * tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits) xen/pvh: Set X86_CR0_WP and others in CR0 (v2) MAINTAINERS: add git repository for Xen xen/pvh: Use 'depend' instead of 'select'. xen: delete new instances of __cpuinit usage xen/fb: allow xenfb initialization for hvm guests xen/evtchn_fifo: fix error return code in evtchn_fifo_setup() xen-platform: fix error return code in platform_pci_init() xen/pvh: remove duplicated include from enlighten.c xen/pvh: Fix compile issues with xen_pvh_domain() xen: Use dev_is_pci() to check whether it is pci device xen/grant-table: Force to use v1 of grants. xen/pvh: Support ParaVirtualized Hardware extensions (v3). xen/pvh: Piggyback on PVHVM XenBus. xen/pvh: Piggyback on PVHVM for grant driver (v4) xen/grant: Implement an grant frame array struct (v3). xen/grant-table: Refactor gnttab_init xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init. xen/pvh: Piggyback on PVHVM for event channels (v2) xen/pvh: Update E820 to work with PVH (v2) xen/pvh: Secondary VCPU bringup (non-bootup CPUs) ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-12Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI / scan: ACPI device object sysfs attribute for _STA evaluation ACPI / hotplug / driver core: Handle containers in a special way ACPI / hotplug: Add demand_offline hotplug profile flag ACPI / bind: Move acpi_get_child() to drivers/ide/ide-acpi.c ACPI / bind: Pass struct acpi_device pointer to acpi_bind_one() ACPI / bind: Rework struct acpi_bus_type ACPI / bind: Redefine acpi_preset_companion() ACPI / bind: Redefine acpi_get_child() PCI / ACPI: Use acpi_find_child_device() for child devices lookup ACPI / bind: Simplify child device lookups ACPI / scan: Use direct recurrence for device hierarchy walks ACPI: Introduce acpi_set_device_status() ACPI / hotplug: Drop unfinished global notification handling routines ACPI / hotplug: Rework generic code to handle suprise removals ACPI / hotplug: Move container-specific code out of the core ACPI / hotplug: Make ACPI PCI root hotplug use common hotplug code ACPI / hotplug: Introduce common hotplug function acpi_device_hotplug() ACPI / hotplug: Do not fail bus and device checks for disabled hotplug ACPI / scan: Add acpi_device objects for all device nodes in the namespace ACPI / scan: Define non-empty device removal handler
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2014-01-10xen: delete new instances of __cpuinit usagePaul Gortmaker
Commit 1fe565517b57676884349dccfd6ce853ec338636 ("xen/events: use the FIFO-based ABI if available") added new instances of __cpuinit macro usage. We removed this a couple versions ago; we now want to remove the compat no-op stubs. Introducing new users is not what we want to see at this point in time, as it will break once the stubs are gone. Cc: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-07xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()Wei Yongjun
Fix to return -ENOMEM from the error handling case instead of 0 (overwrited to 0 by the HYPERVISOR_event_channel_op call), otherwise the error condition cann't be reflected from the return value. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-07xen-platform: fix error return code in platform_pci_init()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, otherwise the error condition cann't be reflected from the return value. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-07xen: Use dev_is_pci() to check whether it is pci deviceYijing Wang
Use PCI standard marco dev_is_pci() instead of directly compare pci_bus_type to check whether it is pci device. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jan Beulich <JBeulich@suse.com>
2014-01-06xen/grant-table: Force to use v1 of grants.Konrad Rzeszutek Wilk
We have the framework to use v2, but there are no backends that actually use it. The end result is that on PV we use v2 grants and on PVHVM v1. The v1 has a capacity of 512 grants per page while the v2 has 256 grants per page. This means we lose about 50% capacity - and if we want more than 16 VIFs (each VIF takes 512 grants), then we are hitting the max per guest of 32. Oracle-bug: 16039922 CC: annie.li@oracle.com CC: msw@amazon.com Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-06xen/pvh: Piggyback on PVHVM XenBus.Mukesh Rathor
PVH is a PV guest with a twist - there are certain things that work in it like HVM and some like PV. For the XenBus mechanism we want to use the PVHVM mechanism. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/pvh: Piggyback on PVHVM for grant driver (v4)Konrad Rzeszutek Wilk
In PVH the shared grant frame is the PFN and not MFN, hence its mapped via the same code path as HVM. The allocation of the grant frame is done differently - we do not use the early platform-pci driver and have an ioremap area - instead we use balloon memory and stitch all of the non-contingous pages in a virtualized area. That means when we call the hypervisor to replace the GMFN with a XENMAPSPACE_grant_table type, we need to lookup the old PFN for every iteration instead of assuming a flat contingous PFN allocation. Lastly, we only use v1 for grants. This is because PVHVM is not able to use v2 due to no XENMEM_add_to_physmap calls on the error status page (see commit 69e8f430e243d657c2053f097efebc2e2cd559f0 xen/granttable: Disable grant v2 for HVM domains.) Until that is implemented this workaround has to be in place. Also per suggestions by Stefano utilize the PVHVM paths as they share common functionality. v2 of this patch moves most of the PVH code out in the arch/x86/xen/grant-table driver and touches only minimally the generic driver. v3, v4: fixes us some of the code due to earlier patches. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/grant: Implement an grant frame array struct (v3).Konrad Rzeszutek Wilk
The 'xen_hvm_resume_frames' used to be an 'unsigned long' and contain the virtual address of the grants. That was OK for most architectures (PVHVM, ARM) were the grants are contiguous in memory. That however is not the case for PVH - in which case we will have to do a lookup for each virtual address for the PFN. Instead of doing that, lets make it a structure which will contain the array of PFNs, the virtual address and the count of said PFNs. Also provide a generic functions: gnttab_setup_auto_xlat_frames and gnttab_free_auto_xlat_frames to populate said structure with appropriate values for PVHVM and ARM. To round it off, change the name from 'xen_hvm_resume_frames' to a more descriptive one - 'xen_auto_xlat_grant_frames'. For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver" we will populate the 'xen_auto_xlat_grant_frames' by ourselves. v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames and also introduces xen_unmap for gnttab_free_auto_xlat_frames. Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v3: Based on top of 'asm/xen/page.h: remove redundant semicolon'] Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/grant-table: Refactor gnttab_initKonrad Rzeszutek Wilk
We have this odd scenario of where for PV paths we take a shortcut but for the HVM paths we first ioremap xen_hvm_resume_frames, then assign it to gnttab_shared.addr. This is needed because gnttab_map uses gnttab_shared.addr. Instead of having: if (pv) return gnttab_map if (hvm) ... gnttab_map Lets move the HVM part before the gnttab_map and remove the first call to gnttab_map. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init.Konrad Rzeszutek Wilk
The function gnttab_max_grant_frames() returns the maximum amount of frames (pages) of grants we can have. Unfortunatly it was dependent on gnttab_init() having been run before to initialize the boot max value (boot_max_nr_grant_frames). This meant that users of gnttab_max_grant_frames would always get a zero value if they called before gnttab_init() - such as 'platform_pci_init' (drivers/xen/platform-pci.c). Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/pvh: Piggyback on PVHVM for event channels (v2)Mukesh Rathor
PVH is a PV guest with a twist - there are certain things that work in it like HVM and some like PV. There is a similar mode - PVHVM where we run in HVM mode with PV code enabled - and this patch explores that. The most notable PV interfaces are the XenBus and event channels. We will piggyback on how the event channel mechanism is used in PVHVM - that is we want the normal native IRQ mechanism and we will install a vector (hvm callback) for which we will call the event channel mechanism. This means that from a pvops perspective, we can use native_irq_ops instead of the Xen PV specific. Albeit in the future we could support pirq_eoi_map. But that is a feature request that can be shared with PVHVM. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/events: use the FIFO-based ABI if availableDavid Vrabel
Implement all the event channel port ops for the FIFO-based ABI. If the hypervisor supports the FIFO-based ABI, enable it by initializing the control block for the boot VCPU and subsequent VCPUs as they are brought up and on resume. The event array is expanded as required when event ports are setup. The 'xen.fifo_events=0' command line option may be used to disable use of the FIFO-based ABI. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow event channel priority to be setDavid Vrabel
Add xen_irq_set_priority() to set an event channels priority. This function will only work with event channel ABIs that support priority (i.e., the FIFO-based ABI). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Add the hypervisor interface for the FIFO-based event channelsDavid Vrabel
Add the hypercall sub-ops and the structures for the shared data used in the FIFO-based event channel ABI. The design document for this new ABI is available here: http://xenbits.xen.org/people/dvrabel/event-channels-H.pdf In summary, events are reported using a per-domain shared event array of event words. Each event word has PENDING, LINKED and MASKED bits and a LINK field for pointing to the next event in the event queue. There are 16 event queues (with different priorities) per-VCPU. Key advantages of this new ABI include: - Support for over 100,000 events (2^17). - 16 different event priorities. - Improved fairness in event latency through the use of FIFOs. The ABI is available in Xen 4.4 and later. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/evtchn: support more than 4096 portsDavid Vrabel
Remove the check during unbind for NR_EVENT_CHANNELS as this limits support to less than 4096 ports. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add xen_evtchn_mask_all()David Vrabel
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Refactor evtchn_to_irq array to be dynamically allocatedDavid Vrabel
Refactor static array evtchn_to_irq array to be dynamically allocated by implementing get and set functions for accesses to the array. Two new port ops are added: max_channels (maximum supported number of event channels) and nr_channels (number of currently usable event channels). For the 2-level ABI, these numbers are both the same as the shared data structure is a fixed size. For the FIFO ABI, these will be different as the event array is expanded dynamically. This allows more than 65000 event channels so an unsigned short is no longer sufficient for an event channel port number and unsigned int is used instead. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add a evtchn_op for port setupDavid Vrabel
Add a hook for port-specific setup and call it from xen_irq_info_common_setup(). The FIFO-based ABIs may need to perform additional setup (expanding the event array) before a bound event channel can start to receive events. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow setup of irq_info to failDavid Vrabel
The FIFO-based event ABI requires additional setup of newly bound events (it may need to expand the event array) and this setup may fail. xen_irq_info_common_init() is a useful place to put this setup so allow this call to fail. This call and the other similar calls are renamed to be *_setup() to reflect that they may now fail. This failure can only occur with new event channels not on rebind. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add struct evtchn_ops for the low-level port operationsDavid Vrabel
evtchn_ops contains the low-level operations that access the shared data structures. This allows alternate ABIs to be supported. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move 2-level specific code into its own fileDavid Vrabel
In preparation for alternative event channel ABIs, move all the functions accessing the shared data structures into their own file. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move drivers/xen/events.c into drivers/xen/events/David Vrabel
events.c will be split into multiple files so move it into its own directory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: replace raw bit ops with functionsWei Liu
In preparation for adding event channel port ops, use set_evtchn() instead of sync_set_bit(). Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: introduce test_and_set_mask()Wei Liu
In preparation for adding event channel port ops, add test_and_set_mask(). Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: remove unnecessary init_evtchn_cpu_bindings()David Vrabel
Because the guest-side binding of an event to a VCPU (i.e., setting the local per-cpu masks) is always explicitly done after an event channel is bound to a port, there is no need to initialize all possible events as bound to VCPU 0 at start of day or after a resume. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: refactor retrigger_dynirq() and resend_irq_on_evtchn()David Vrabel
These two function did the same thing with different parameters, put the common bits in retrigger_evtchn(). This changes the return value of resend_irq_on_evtchn() but the only caller (in arch/ia64/xen/irq_xen.c) ignored the return value so this is fine. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/pci: Fix build on non-x86Ben Hutchings
We can't include <asm/pci_x86.h> if this isn't x86, and we only need it if CONFIG_PCI_MMCONFIG is enabled. Fixes: 8deb3eb1461e ('xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2014-01-06xen: simplify balloon_first_page() with list_first_entry_or_null()Jie Liu
Replace the code logic at balloon_first_page() by calling list_first_entry_or_null() directly. since here is only one user of that routine, therefore we can just remove it. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-06xen: balloon: enable for ARMIan Campbell
Since c275a57f5ec3 "xen/balloon: Set balloon's initial state to number of existing RAM pages" the balloon driver appears to work fine on ARM as far as I can tell. Prior to that commit it was broken because on ARM RAM doesn't typically start at zero, effectively leaving a big MMIO hole at the start. This would cause the balloon driver to give away all of RAM at start of day, which is rather inconvenient. It was already enabled (or rather not excluded) on ARM64. The c1d15f5c8bc1170dafe16e988e55437245966dfe "xen/balloon: Seperate the auto-translate logic properly (v2)" added in the proper plumbing to work with ARM and PVH type guests. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v2: Added the bit about PVH] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-03xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk
The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] CC: stable@vger.kernel.org
2013-12-20Merge tag 'stable/for-linus-3.13-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use scratch pages. - Fix block API header for ARM32 and ARM64 to have proper layout - On ARM when mapping guests, stick on PTE_SPECIAL - When using SWIOTLB under ARM, don't call swiotlb functions twice - When unmapping guests memory and if we fail, don't return pages which failed to be unmapped. - Grant driver was using the wrong address on ARM. * tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Seperate the auto-translate logic properly (v2) xen/block: Correctly define structures in public headers on ARM32 and ARM64 arm: xen: foreign mapping PTEs are special. xen/arm64: do not call the swiotlb functions twice xen: privcmd: do not return pages which we have failed to unmap XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
2013-12-19Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply fixes on top of newer things in tree (efi-stub). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-13xen/balloon: Seperate the auto-translate logic properly (v2)Stefano Stabellini
The auto-xlat logic vs the non-xlat means that we don't need to for auto-xlat guests (like PVH, HVM or ARM): - use P2M - use scratch page. However the code in increase_reservation does modify the p2m for auto_translate guests, but not in decrease_reservation. Fix that by avoiding any p2m modifications in both increase_reservation and decrease_reservation for auto_translated guests. And also avoid allocating or using scratch pages for auto_translated guests. Lastly, since !auto-xlat is really another way of saying 'xen_pv' remove the redundant 'xen_pv_domain' check. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v2: Updated the description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-12-07Merge branch 'acpi-cleanup' into acpi-hotplugRafael J. Wysocki
Conflicts: drivers/acpi/scan.c
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>