summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-12-07Merge branch 'for-3.18-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Three libata fixes for v3.18. Nothing too interesting. PCI ID ID and quirk additions to ahci and an error handling path fix in sata_fsl" * 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: disable MSI on SAMSUNG 0xa800 SSD sata_fsl: fix error handling of irq_of_parse_and_map AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
2014-12-06Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fix from Wim Van Sebroeck: "Fix the watchdog mask bit offset for Exynos7" * git://www.linux-watchdog.org/linux-watchdog: watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
2014-12-06Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are two more driver bugfixes for I2C which would be good to have" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Set the hardware time-out register to maximum value i2c: davinci: generate STP always when NACK is received
2014-12-05watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7Abhilash Kesavan
The watchdog mask bit offset listed for Exynos7 is incorrect. Fix this. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com Reviewd-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm intel fixes from Dave Airlie: "Two intel stable fixes, that should be it from me for this round" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
2014-12-04Merge tag 'pm+acpi-3.18-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI backlight fix from Rafael Wysocki: "This is a simple fix for an ACPI backlight regression introduced by a recent commit that overlooked a corner case which should have been taken into account" * tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: update condition to check if device is in _DOD list
2014-12-05Merge tag 'drm-intel-fixes-2014-12-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Silence some pch fifo underrun reports and panel locking backtraces, both cc: stable. * tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
2014-12-04Merge tag 'media/v3.18-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A core fix and some driver fixes: - regression fix in Remote Controller core affecting RC6 protocol handling - fix video buffer handling in cx23885 - race fix in solo6x10 - fix image selection in smiapp - fix reported payload size on s2255drv - two updates for MAINTAINERS file" * tag 'media/v3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] rc-core: fix toggle handling in the rc6 decoder MAINTAINERS: Update mchehab's addresses [media] cx23885: use sg = sg_next(sg) instead of sg++ [media] s2255drv: fix payload size for JPG, MJPEG [media] Update MAINTAINERS for solo6x10 [media] solo6x10: fix a race in IRQ handler [media] smiapp: Only some selection targets are settable
2014-12-04i2c: cadence: Set the hardware time-out register to maximum valueVishnu Motghare
Cadence I2C controller has bug wherein it generates invalid read transactions after timeout in master receiver mode. This driver does not use the HW timeout and this interrupt is disabled but the feature itself cannot be disabled. Hence, this patch writes the maximum value (0xFF) to this register. This is one of the workarounds to this bug and it will not avoid the issue completely but reduces the chances of error. Signed-off-by: Vishnu Motghare <vishnum@xilinx.com> Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-12-04i2c: davinci: generate STP always when NACK is receivedGrygorii Strashko
According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a26eb ("i2c: omap: query STP always when NACK is received"). Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-12-04ahci: disable MSI on SAMSUNG 0xa800 SSDTejun Heo
Just like 0x1600 which got blacklisted by 66a7cbc303f4 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171 Cc: stable@vger.kernel.org
2014-12-03Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "A few driver bugfixes for 3.18" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: omap: fix i207 errata handling i2c: designware: prevent early stop on TX FIFO empty i2c: omap: fix NACK and Arbitration Lost irq handling
2014-12-03Merge tag 'pci-v3.18-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "This fixes a Tegra20 regression that we introduced during the v3.18 merge window" * tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: tegra: Use physical range for I/O mapping
2014-12-03Merge tag 'devicetree-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bugfix from Grant Likely: "One more bug fix for v3.18. I debated whether or not to send you this merge request because we're at such a late rc. The bug isn't critical in that there is only one system known to be affected and the patch is easy to backport. The codepath is used by pretty much every DT based system, so there is risk a of regression (it /should/ be safe, but I've been bitten by stuff that should be safe before). I've had it in linux-next for a week and haven't received any complaints. I think it probably should just be merged right away rather than waiting for the merge window and backporting. It does fix a real bug and the code is theoretically safer after the change. I can't think of any situation where it would be dangerous to reserve the DT memory an extra time. Summary from tag: Single bugfix for boot failure seen in the wild. The memory reserve code tries to be clever about reserving the FDT, but it should just go ahead and reserve it unconditionally to avoid the problem of partial overlap described in the patch" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap
2014-12-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and Nouveau fixes: So nouveau had a few regression introduced, Ben and Maarten finally tracked down the one that was causing problems on my MacBookPro, also nvidia gave some info on the an engine we were using incorrectly, so disable our use of it, and one regresion with pci hotplug affecting optimus users. Radeon has an oops fixs, sync fix, and one workaround to avoid broken functionality on 32-bit x86, this needs better root causing and a better fix, but the bandaid is a lot safer at this point" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6 drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86 drm/radeon: sync all BOs involved in a CS v2 nouveau: move the hotplug ignore to correct place. drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
2014-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fill in ethtool link parameters for all link types in cxgb4, from Hariprasad Shenai. 2) Fix probe regressions in stmmac driver, from Huacai Chen. 3) Network namespace leaks on errirs in rtnetlink, from Nicolas Dichtel. 4) Remove erroneous BUG check which can actually trigger legitimately, in xen-netfront. From Seth Forshee. 5) Validate length of IFLA_BOND_ARP_IP_TARGET netlink attributes, from Thomas Grag. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: cxgb4: Fill in supported link mode for SFP modules xen-netfront: Remove BUGs on paged skb data which crosses a page boundary sh_eth: Fix sleeping function called from invalid context stmmac: platform: Move plat_dat checking earlier sh_eth: Fix skb alloc size and alignment adjust rule. rtnetlink: release net refcnt on error in do_setlink() bond: Check length of IFLA_BOND_ARP_IP_TARGET attributes
2014-12-03drivers/input/evdev.c: don't kfree() a vmalloc addressAndrew Morton
If kzalloc() failed and then evdev_open_device() fails, evdev_open() will pass a vmalloc'ed pointer to kfree. This might fix https://bugzilla.kernel.org/show_bug.cgi?id=88401, where there was a crash in kfree(). Reported-by: Christian Casteyde <casteyde.christian@free.fr> Belatedly-Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-02cxgb4: Fill in supported link mode for SFP modulesHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02xen-netfront: Remove BUGs on paged skb data which crosses a page boundarySeth Forshee
These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c374782e4 ("xen/netfront: handle compound page fragments on transmit") Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with ↵Petr Mladek
3.18.0-rc6 I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86Michel Dänzer
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84627 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: sync all BOs involved in a CS v2Christian König
Not just the userspace relocs, otherwise we won't wait for a swapped out page tables to be swapped in again. v2: rebased on Alex current drm-fixes-3.18 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-02sata_fsl: fix error handling of irq_of_parse_and_mapDmitry Torokhov
irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02AHCI: Add DeviceIDs for Sunrise Point-LP SATA controllerDevin Ryles
This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by: Devin Ryles <devin.ryles@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02drm/i915: Unlock panel even when LVDS is disabledDaniel Vetter
Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3672aaebb4acddf90944a114fa5c8af7b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by: Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-02drm/i915: More cautious with pch fifo underrunsDaniel Vetter
Apparently PCH fifo underruns are tricky, we have plenty reports that we see the occasional underrun (especially at boot-up). So for a change let's see what happens when we don't re-enable pch fifo underrun reporting when the pipe is disabled. This means that the kernel can't catch pch fifo underruns when they happen (except when all pipes are on on the pch). But we'll still catch underruns when disabling the pipe again. So not a terrible reduction in test coverage. Since the DRM_ERROR is new and hence a regression plan B would be to revert it back to a debug output. Which would be a lot worse than this hack for underrun test coverage in the wild. See the referenced discussions for more. References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=86233 References: https://bugs.freedesktop.org/show_bug.cgi?id=86478 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: lu hua <huax.lu@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-02nouveau: move the hotplug ignore to correct place.Dave Airlie
Introduced in b440bde74f, however it was added to the wrong function in nouveau. https://bugzilla.kernel.org/show_bug.cgi?id=86011 Cc: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-02Merge branch 'linux-3.18' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Just a couple of fixes for the fallout from the fence rework. * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
2014-12-02drm/nouveau/gf116: remove copy1 engineIlia Mirkin
Indications are that no GF116's actually have a copy engine there, but actually have the decompression engine. This engine can be made to do copies, but that should be done separately. Unclear why this didn't turn up on all GF116's, but perhaps the non-mobile ones came with enough VRAM to not trigger ttm migrations in test scenarios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=85465 Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=59168 Cc: stable@vger.kernel.org Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau: prevent stale fence->channel pointers, and protect with rcuMaarten Lankhorst
Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau/fifo/g84-: ack non-stall interrupt before handling itBen Skeggs
Closes a very unlikely race that can occur if another NonStallInterrupt method passes between checking fences and acking the previous interrupt. With this change, the interrupt will re-fire under such conditions. Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-01PCI: tegra: Use physical range for I/O mappingThierry Reding
Commit 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") changed how I/O resources are parsed from DT. Rather than containing the physical address of the I/O region, the addresses will now be in I/O address space. On Tegra the union of all ranges is used to expose a top-level memory- mapped resource for the PCI host bridge. This helps to make /proc/iomem more readable. Combining both of the above, the union would now include the I/O space region. This causes a regression on Tegra20, where the physical base address of the PCIe controller (and therefore of the union) is located at physical address 0x80000000. Since I/O space starts at 0, the union will now include all of system RAM which starts at 0x00000000. This commit fixes this by keeping two copies of the I/O range: one that represents the range in the CPU's physical address space, the other for the range in the I/O address space. This allows the translation setup within the driver to reuse the physical addresses. The code registering the I/O region with the PCI core uses both ranges to establish the mapping. Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2014-12-01ACPI / video: update condition to check if device is in _DOD listAaron Lu
Commit 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") checks if the video device is in the bind devices list to decide if we should create backlight device for it, that causes problem for one Dell Latitude E6410, where none of the video output devices are properly bound due to the way how we did the comparing between its _ADR and the _DOD's values. Solve this problem by comparing the lower 12 bits of both the device's _ADR and the _DOD's values instead of relying on bind result. Fixes: 0b8db271f159 ("ACPI / video: check _DOD list when creating backlight devices") Reported-and-tested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Two i915 regressions and one dual-gpu laptop radeon fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
2014-11-29sh_eth: Fix sleeping function called from invalid contextMitsuhiro Kimura
This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29stmmac: platform: Move plat_dat checking earlierHuacai Chen
Original code only check/alloc plat_dat for the CONFIG_OF case, this patch check/alloc it earlier and unconditionally to avoid kernel build warnings: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:275 stmmac_pltfr_probe() warn: variable dereferenced before check 'plat_dat' V2: Fix coding style. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29sh_eth: Fix skb alloc size and alignment adjust rule.Mitsuhiro Kimura
In the current driver, allocation size of skb does not care the alignment adjust after allocation. And also, in the current implementation, buffer alignment method by sh_eth_set_receive_align function has a bug that this function displace buffer start address forcedly when the alignment is corrected. In the result, tail of the skb will exceed allocated area and kernel panic will be occurred. This patch fix this issue. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29bond: Check length of IFLA_BOND_ARP_IP_TARGET attributesThomas Graf
Fixes: 7f28fa10 ("bonding: add arp_ip_target netlink support") Reported-by: John Fastabend <john.fastabend@gmail.com> Cc: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three fixlets from the ARM SoC camp: - correct irqdomain initialization for atmel-aic - correct error handling for device tree parsing in bcm controllers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map irqchip: atmel-aic: Fix irqdomain initialization
2014-11-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of ten fixes: 8 for UFS including four static checker warnings, a potential null deref in the voltage regulator code, a race on module unload, a ref counting fix on the well known LUNs which made it impossible to remove the ufs module and fix to correct the information in pwr_info. In addition to UFS, there's a blacklist for the Intel Multi-Flex array which chokes on report supported operation codes and a fix to an oops in bnx2fc caused by shared skbs" [ For us non-SCSI people: "UFS" here is "Universal Flash Storage" not the filesystem. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ufs: fix NULL dereference when no regulators are defined ufs: ensure clk gating work is finished before module unloading scsi: ufs: fix static checker warning in ufshcd_parse_clock_info scsi: ufs: fix static checker warning in __ufshcd_setup_clocks scsi: ufs: fix static checker warning in ufshcd_populate_vreg scsi: ufs: fix static checker errors in ufshcd_system_suspend ufs: fix power info after link start-up ufs: fix reference counting of W-LUs scsi: add Intel Multi-Flex to scsi scan blacklist bnx2fc: do not add shared skbs to the fcoe_rx_list
2014-11-28Merge tag 'staging-3.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 3.18-rc7 that resolve a number of reported issues, and a new device id for a staging wireless driver. All of these have been in linux-next" * tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID for DLink GO-USB-N150 staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd iio: accel: bmc150: set low default thresholds iio: accel: bmc150: Fix iio_event_spec direction iio: accel: bmc150: Send x, y and z motion separately iio: accel: bmc150: Error handling when mode set fails iio: gyro: bmg160: Fix iio_event_spec direction iio: gyro: bmg160: Send x, y and z motion separately iio: gyro: bmg160: Don't let interrupt mode to be open drain iio: gyro: bmg160: Error handling when mode set fails iio: adc: men_z188_adc: Add terminating entry for men_z188_ids iio: accel: kxcjk-1013: Fix kxcjk10013_set_range iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
2014-11-28Merge tag 'tty-3.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fix from Greg KH: "Here is a single revert for the of-serial driver that resolves a reported issue. This revert has been in linux-next for a while" * tag 'tty-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: of-serial: add PM suspend/resume support"
2014-11-28Merge tag 'usb-3.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes and new device ids for 3.18-rc7. Full details are in the shortlog, and all of these have been in the linux-next tree for a while" * tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 usb: xhci: rework root port wake bits if controller isn't allowed to wakeup USB: xhci: Reset a halted endpoint immediately when we encounter a stall. Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" USB: xhci: don't start a halted endpoint before its new dequeue is set USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012 USB: ssu100: fix overrun-error reporting USB: keyspan: fix overrun-error reporting USB: keyspan: fix tty line-status reporting usb: serial: ftdi_sio: add PIDs for Matrix Orbital products usb: dwc3: ep0: fix for dead code USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
2014-11-28Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "In this -rc still very minor changes: - Lee Jones fixes compilation warning in sti thermal driver - Marjus Elfring removes unnecessary checks in exynos thermal driver (as per coccinelle) - Now we always update cpufreq policies, and thus get (hopefully) always in sync with cpufreq, thanks to Yadwinder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: Exynos: Deletion of unnecessary checks before two function calls thermal: sti: Ignore suspend/resume functions when !PM_SLEEP thermal: cpu_cooling: Update always cpufreq policy with thermal constraints
2014-11-28Merge tag 'drm-intel-fixes-2014-11-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Two regression fixes from Ville. * tag 'drm-intel-fixes-2014-11-27' of git://anongit.freedesktop.org/drm-intel: drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
2014-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several small fixes here: 1) Don't crash in tg3 driver when the number of tx queues has been configured to be different from the number of rx queues. From Thadeu Lima de Souza Cascardo. 2) VLAN filter not disabled properly in promisc mode in ixgbe driver, from Vlad Yasevich. 3) Fix OOPS on dellink op in VTI tunnel driver, from Xin Long. 4) IPV6 GRE driver WCCP code checks skb->protocol for ETH_P_IP instead of ETH_P_IPV6, whoops. From Yuri Chislov. 5) Socket matching in ping driver is buggy when packet AF does not match socket's AF. Fix from Jane Zhou. 6) Fix checksum calculation errors in VXLAN due to where the udp_tunnel6_xmit_skb() helper gets it's saddr/daddr from. From Alexander Duyck. 7) Fix 5G detection problem in rtlwifi driver, from Larry Finger. 8) Fix NULL deref in tcp_v{4,6}_send_reset, from Eric Dumazet. 9) Various missing netlink attribute verifications in bridging code, from Thomas Graf. 10) tcp_recvmsg() unconditionally calls ipv4 ip_recv_error even for ipv6 sockets, whoops. Fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINK bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVE net: Check for presence of IFLA_AF_SPEC net: Validate IFLA_BRIDGE_MODE attribute length bridge: Validate IFLA_BRIDGE_FLAGS attribute length stmmac: platform: fix default values of the filter bins setting net/mlx4_core: Limit count field to 24 bits in qp_alloc_res net: dsa: bcm_sf2: reset switch prior to initialization net: dsa: bcm_sf2: fix unmapping registers in case of errors tg3: fix ring init when there are more TX than RX channels tcp: fix possible NULL dereference in tcp_vX_send_reset() rtlwifi: Change order in device startup rtlwifi: rtl8821ae: Fix 5G detection problem Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse" vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX] ip6_udp_tunnel: Fix checksum calculation net-timestamp: Fix a documentation typo net/ping: handle protocol mismatching scenario af_packet: fix sparse warning ...
2014-11-27Merge tag 'spi-v3.18-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "There's a couple of driver fixes here, plus one core fix for the DMA mapping which wasn't doing the right thing for vmalloc()ed addresses that hadn't been through kmap(). It's fairly rare to use vmalloc() with SPI and it's a subset of those users who might fail so it's unsurprising that this wasn't noticed sooner" * tag 'spi-v3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sirf: fix word width configuration spi: Fix mapping from vmalloc-ed buffer to scatter list spi: dw: Fix dynamic speed change.
2014-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "The main change is to fix breakage in Elantech driver introduced by the recent commit adding trackpoint reporting to protocol v4. Now we are trusting the hardware to advertise the trackpoint properly and do not try to decode the data as trackpoint if firmware told us it is not present" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - use proper endpoint type Input: elantech - trust firmware about trackpoint presence Input: synaptics - adjust min/max on Thinkpad E540
2014-11-27staging: r8188eu: Add new device ID for DLink GO-USB-N150Larry Finger
The DLink GO-USB-N150 with revision B1 uses this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes one fix for PX laptops. * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails