summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-11-30ata: fixes kernel crash while tracing ata_eh_link_autopsy eventRameshwar Prasad Sahu
commit f1601113ddc0339a745e702f4fb1ca37d4875e65 upstream. When tracing ata link error event, the kernel crashes when the disk is removed due to NULL pointer access by trace_ata_eh_link_autopsy API. This occurs as the dev is NULL when the disk disappeared. This patch fixes this crash by calling trace_ata_eh_link_autopsy only if "dev" is not NULL. v2 changes: Removed direct passing "link" pointer instead of "dev" in trace API. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 255c03d15a29 ("libata: Add tracepoints") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30rtlwifi: fix uninitialized rtlhal->last_suspend_sec timeArnd Bergmann
commit 3f2a162fab15aee243178b5308bb5d1206fc4043 upstream. We set rtlhal->last_suspend_sec to an uninitialized stack variable, but unfortunately gcc never warned about this, I only found it while working on another patch. I opened a gcc bug for this. Presumably the value of rtlhal->last_suspend_sec is not all that important, but it does get used, so we probably want the patch backported to stable kernels. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82839 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30rtlwifi: rtl8192ee: Fix memory leak when loading firmwareLarry Finger
commit 519ce2f933fa14acf69d5c8cabcc18711943d629 upstream. In routine rtl92ee_set_fw_rsvdpagepkt(), the driver allocates an skb, but never calls rtl_cmd_send_packet(), which will free the buffer. All other rtlwifi drivers perform this operation correctly. This problem has been in the driver since it was included in the kernel. Fortunately, each firmware load only leaks 4 buffers, which likely explains why it has not previously been detected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30bcache: check ca->alloc_thread initialized before wake up itColy Li
commit 91af8300d9c1d7c6b6a2fd754109e08d4798b8d8 upstream. In bcache code, sysfs entries are created before all resources get allocated, e.g. allocation thread of a cache set. There is posibility for NULL pointer deference if a resource is accessed but which is not initialized yet. Indeed Jorg Bornschein catches one on cache set allocation thread and gets a kernel oops. The reason for this bug is, when bch_bucket_alloc() is called during cache set registration and attaching, ca->alloc_thread is not properly allocated and initialized yet, call wake_up_process() on ca->alloc_thread triggers NULL pointer deference failure. A simple and fast fix is, before waking up ca->alloc_thread, checking whether it is allocated, and only wake up ca->alloc_thread when it is not NULL. Signed-off-by: Coly Li <colyli@suse.de> Reported-by: Jorg Bornschein <jb@capsec.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30rt2x00usb: mark device removed when get ENOENT usb errorStanislaw Gruszka
commit bfa62a52cad93686bb8d8171ea5288813248a7c6 upstream. ENOENT usb error mean "specified interface or endpoint does not exist or is not enabled". Mark device not present when we encounter this error similar like we do with ENODEV error. Otherwise we can have infinite loop in rt2x00usb_work_rxdone(), because we remove and put again RX entries to the queue infinitely. We can have similar situation when submit urb will fail all the time with other error, so we need consider to limit number of entries processed by rxdone work. But for now, since the patch fixes reproducible soft lockup issue on single processor systems and taken ENOENT error meaning, let apply this fix. Patch adds additional ENOENT check not only in rx kick routine, but also on other places where we check for ENODEV error. Reported-by: Richard Genoud <richard.genoud@gmail.com> Debugged-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30dm: fix race between dm_get_from_kobject() and __dm_destroy()Hou Tao
commit b9a41d21dceadf8104812626ef85dc56ee8a60ed upstream. The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30dm: allocate struct mapped_device with kvzallocMikulas Patocka
commit 856eb0916d181da6d043cc33e03f54d5c5bbe54a upstream. The structure srcu_struct can be very big, its size is proportional to the value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field io_barrier in the struct mapped_device has 84kB in the debugging kernel and 50kB in the non-debugging kernel. The large size may result in failure of the function kzalloc_node. In order to avoid the allocation failure, we use the function kvzalloc_node, this function falls back to vmalloc if a large contiguous chunk of memory is not available. This patch also moves the field io_barrier to the last position of struct mapped_device - the reason is that on many processor architectures, short memory offsets result in smaller code than long memory offsets - on x86-64 it reduces code size by 320 bytes. Note to stable kernel maintainers - the kernels 4.11 and older don't have the function kvzalloc_node, you can use the function vzalloc_node instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30dm bufio: fix integer overflow when limiting maximum cache sizeEric Biggers
commit 74d4108d9e681dbbe4a2940ed8fdff1f6868184c upstream. The default max_cache_size_bytes for dm-bufio is meant to be the lesser of 25% of the size of the vmalloc area and 2% of the size of lowmem. However, on 32-bit systems the intermediate result in the expression (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100 overflows, causing the wrong result to be computed. For example, on a 32-bit system where the vmalloc area is 520093696 bytes, the result is 1174405 rather than the expected 130023424, which makes the maximum cache size much too small (far less than 2% of lowmem). This causes severe performance problems for dm-verity users on affected systems. Fix this by using mult_frac() to correctly multiply by a percentage. Do this for all places in dm-bufio that multiply by a percentage. Also replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary to the comment is now defined in include/linux/vmalloc.h. Depends-on: 9993bc635 ("sched/x86: Fix overflow in cyc2ns_offset") Fixes: 95d402f057f2 ("dm: add bufio") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UFVadim Lomovtsev
commit 7f342678634f16795892677204366e835e450dda upstream. The Cavium ThunderX (CN8XXX) family of PCIe Root Ports does not advertise an ACS capability. However, the RTL internally implements similar protection as if ACS had Request Redirection, Completion Redirection, Source Validation, and Upstream Forwarding features enabled. Change Cavium ACS capabilities quirk flags accordingly. Fixes: b404bcfbf035 ("PCI: Add ACS quirk for all Cavium devices") Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> [bhelgaas: tidy changelog, comment, stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ACPI / EC: Fix regression related to triggering source of EC event handlingLv Zheng
commit 53c5eaabaea9a1b7a96f95ccc486d2ad721d95bb upstream. Originally the Samsung quirks removed by commit 4c237371 can be covered by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956 changed ec_freeze_events=Y back to N, making this problem re-surface. Actually, if commit e923e8e7 is robust enough, we can freely change ec_freeze_events mode, so this patch fixes the issue by improving commit e923e8e7. Related commits listed in the merged order: Commit: e923e8e79e18fd6be9162f1be6b99a002e9df2cb Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled Commit: 4c237371f290d1ed3b2071dd43554362137b1cce Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk Commit: 9c40f956ce9b331493347d1b3cb7e384f7dc0581 Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression This patch not only fixes the reported post-resume EC event triggering source issue, but also fixes an unreported similar issue related to the driver bind by adding EC event triggering source in ec_install_handlers(). Fixes: e923e8e79e18 (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled) Fixes: 4c237371f290 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk) Fixes: 9c40f956ce9b (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reported-by: Alistair Hamilton <ahpatent@gmail.com> Tested-by: Alistair Hamilton <ahpatent@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24ipmi: fix unsigned long underflowCorey Minyard
commit 392a17b10ec4320d3c0e96e2a23ebaad1123b989 upstream. When I set the timeout to a specific value such as 500ms, the timeout event will not happen in time due to the overflow in function check_msg_timeout: ... ent->timeout -= timeout_period; if (ent->timeout > 0) return; ... The type of timeout_period is long, but ent->timeout is unsigned long. This patch makes the type consistent. Reported-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24dmaengine: dmatest: warn user when dma test times outAdam Wallis
commit a9df21e34b422f79d9a9fa5c3eff8c2a53491be6 upstream. Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24serial: 8250_fintek: Fix finding base_port with activated SuperIOJi-Ze Hong (Peter Hong)
commit fd97e66c5529046e989a0879c3bb58fddb592c71 upstream. The SuperIO will be configured at boot time by BIOS, but some BIOS will not deactivate the SuperIO when the end of configuration. It'll lead to mismatch for pdata->base_port in probe_setup_port(). So we'll deactivate all SuperIO before activate special base_port in fintek_8250_enter_key(). Tested on iBASE MI802. Tested-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Reviewd-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24serial: omap: Fix EFR write on RTS deassertionLukas Wunner
commit 2a71de2f7366fb1aec632116d0549ec56d6a3940 upstream. Commit 348f9bb31c56 ("serial: omap: Fix RTS handling") sought to enable auto RTS upon manual RTS assertion and disable it on deassertion. However it seems the latter was done incorrectly, it clears all bits in the Extended Features Register *except* auto RTS. Fixes: 348f9bb31c56 ("serial: omap: Fix RTS handling") Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24fealnx: Fix building error on MIPSHuacai Chen
[ Upstream commit cc54c1d32e6a4bb3f116721abf900513173e4d02 ] This patch try to fix the building error on MIPS. The reason is MIPS has already defined the LONG macro, which conflicts with the LONG enum in drivers/net/ethernet/fealnx.c. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: usb: asix: fill null-ptr-deref in asix_suspendAndrey Konovalov
[ Upstream commit 8f5624629105589bcc23d0e51cc01bd8103d09a5 ] When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Similar issue is present in asix_resume(), this patch fixes it as well. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24qmi_wwan: Add missing skb_reset_mac_header-callKristian Evensen
[ Upstream commit 0de0add10e587effa880c741c9413c874f16be91 ] When we receive a packet on a QMI device in raw IP mode, we should call skb_reset_mac_header() to ensure that skb->mac_header contains a valid offset in the packet. While it shouldn't really matter, the packets have no MAC header and the interface is configured as-such, it seems certain parts of the network stack expects a "good" value in skb->mac_header. Without the skb_reset_mac_header() call added in this patch, for example shaping traffic (using tc) triggers the following oops on the first received packet: [ 303.642957] skbuff: skb_under_panic: text:8f137918 len:177 put:67 head:8e4b0f00 data:8e4b0eff tail:0x8e4b0fb0 end:0x8e4b1520 dev:wwan0 [ 303.655045] Kernel bug detected[#1]: [ 303.658622] CPU: 1 PID: 1002 Comm: logd Not tainted 4.9.58 #0 [ 303.664339] task: 8fdf05e0 task.stack: 8f15c000 [ 303.668844] $ 0 : 00000000 00000001 0000007a 00000000 [ 303.674062] $ 4 : 8149a2fc 8149a2fc 8149ce20 00000000 [ 303.679284] $ 8 : 00000030 3878303a 31623465 20303235 [ 303.684510] $12 : ded731e3 2626a277 00000000 03bd0000 [ 303.689747] $16 : 8ef62b40 00000043 8f137918 804db5fc [ 303.694978] $20 : 00000001 00000004 8fc13800 00000003 [ 303.700215] $24 : 00000001 8024ab10 [ 303.705442] $28 : 8f15c000 8fc19cf0 00000043 802cc920 [ 303.710664] Hi : 00000000 [ 303.713533] Lo : 74e58000 [ 303.716436] epc : 802cc920 skb_panic+0x58/0x5c [ 303.721046] ra : 802cc920 skb_panic+0x58/0x5c [ 303.725639] Status: 11007c03 KERNEL EXL IE [ 303.729823] Cause : 50800024 (ExcCode 09) [ 303.733817] PrId : 0001992f (MIPS 1004Kc) [ 303.737892] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2i Process logd (pid: 1002, threadinfo=8f15c000, task=8fdf05e0, tls=77b3eee4) [ 303.962509] Stack : 00000000 80408990 8f137918 000000b1 00000043 8e4b0f00 8e4b0eff 8e4b0fb0 [ 303.970871] 8e4b1520 8fec1800 00000043 802cd2a4 6e000045 00000043 00000000 8ef62000 [ 303.979219] 8eef5d00 8ef62b40 8fea7300 8f137918 00000000 00000000 0002bb01 793e5664 [ 303.987568] 8ef08884 00000001 8fea7300 00000002 8fc19e80 8eef5d00 00000006 00000003 [ 303.995934] 00000000 8030ba90 00000003 77ab3fd0 8149dc80 8004d1bc 8f15c000 8f383700 [ 304.004324] ... [ 304.006767] Call Trace: [ 304.009241] [<802cc920>] skb_panic+0x58/0x5c [ 304.013504] [<802cd2a4>] skb_push+0x78/0x90 [ 304.017783] [<8f137918>] 0x8f137918 [ 304.021269] Code: 00602825 0c02a3b4 24842888 <000c000d> 8c870060 8c8200a0 0007382b 00070336 8c88005c [ 304.031034] [ 304.032805] ---[ end trace b778c482b3f0bda9 ]--- [ 304.041384] Kernel panic - not syncing: Fatal exception in interrupt [ 304.051975] Rebooting in 3 seconds.. While the oops is for a 4.9-kernel, I was able to trigger the same oops with net-next as of yesterday. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: qmi_wwan: fix divide by 0 on bad descriptorsBjørn Mork
[ Upstream commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b ] A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: cdc_ether: fix divide by 0 on bad descriptorsBjørn Mork
[ Upstream commit 2cb80187ba065d7decad7c6614e35e07aec8a974 ] Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24bonding: discard lowest hash bit for 802.3ad layer3+4Hangbin Liu
[ Upstream commit b5f862180d7011d9575d0499fa37f0f25b423b12 ] After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range in connect()"), we will try to use even ports for connect(). Then if an application (seen clearly with iperf) opens multiple streams to the same destination IP and port, each stream will be given an even source port. So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing will always hash all these streams to the same interface. And the total throughput will limited to a single slave. Change the tcp code will impact the whole tcp behavior, only for bonding usage. Paolo Abeni suggested fix this by changing the bonding code only, which should be more reasonable, and less impact. Fix this by discarding the lowest hash bit because it contains little entropy. After the fix we can re-balance between slaves. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: vrf: correct FRA_L3MDEV encode typeJeff Barnhill
[ Upstream commit 18129a24983906eaf2a2d448ce4b83e27091ebe2 ] FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21staging: greybus: spilib: fix use-after-free after deregistrationJohan Hovold
commit 770b03c2ca4aa44d226cf248f86aa23e546147d0 upstream. Remove erroneous spi_master_put() after controller deregistration which would access the already freed spi controller. Note that spi_unregister_master() drops our only controller reference. Fixes: ba3e67001b42 ("greybus: SPI: convert to a gpbridge driver") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21brcmfmac: don't preset all channels as disabledRafał Miłecki
commit 9ea0c307609fd20e03f53546b9cefbb20b96785d upstream. During init we take care of regulatory stuff by disabling all unavailable channels (see brcmf_construct_chaninfo) so this predisabling them is not really required (and this patch won't change any behavior). It will on the other hand allow more detailed runtime control over channels which is the main reason for this change. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Lambdadroid <lambdadroid@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: serial: garmin_gps: fix memory leak on probe errorsJohan Hovold
commit 74d471b598444b7f2d964930f7234779c80960a0 upstream. Make sure to free the port private data before returning after a failed probe attempt. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: serial: garmin_gps: fix I/O after failed probe and removeJohan Hovold
commit 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 upstream. Make sure to stop any submitted interrupt and bulk-out URBs before returning after failed probe and when the port is being unbound to avoid later NULL-pointer dereferences in the completion callbacks. Also fix up the related and broken I/O cancellation on failed open and on close. (Note that port->write_urb was never submitted.) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw updateDouglas Fischer
commit 771394a54148f18926ca86414e51c69eda27d0cd upstream. Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update mode. Signed-off-by: Douglas Fischer <douglas.fischer@outlook.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21usb: gadget: f_fs: Fix use-after-free in ffs_free_instAndrew Gabbasov
commit cdafb6d8b8da7fde266f79b3287ac221aa841879 upstream. KASAN enabled configuration reports an error BUG: KASAN: use-after-free in ffs_free_inst+... [usb_f_fs] at addr ... Write of size 8 by task ... This is observed after "ffs-test" is run and interrupted. If after that functionfs is unmounted and g_ffs module is unloaded, that use-after-free occurs during g_ffs module removal. Although the report indicates ffs_free_inst() function, the actual use-after-free condition occurs in _ffs_free_dev() function, which is probably inlined into ffs_free_inst(). This happens due to keeping the ffs_data reference in device structure during functionfs unmounting, while ffs_data itself is freed as no longer needed. The fix is to clear that reference in ffs_closed() function, which is a counterpart of ffs_ready(), where the reference is stored. Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: Add delay-init quirk for Corsair K70 LUX keyboardsBernhard Rosenkraenzer
commit a0fea6027f19c62727315aba1a7fae75a9caa842 upstream. Without this patch, K70 LUX keyboards don't work, saying usb 3-3: unable to read config index 0 descriptor/all usb 3-3: can't read configurations, error -110 usb usb3-port3: unable to enumerate USB device Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: usbfs: compute urb->actual_length for isochronousAlan Stern
commit 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 upstream. The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-and-tested-by: wlf <wulf@rock-chips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21staging: greybus: add host device function pointer checksJason Hrycay
[ Upstream commit f05a88a39c5b5f226e08e626998bb920723b7d85 ] Add sanity checks for cport_quiesce and cport_clear before invoking the callbacks as these function pointers are not required during the host device registration. This follows the logic implemented elsewhere for various other function pointers. Signed-off-by: Jason Hrycay <jhrycay@gmail.com> Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21staging: wilc1000: Fix endian sparse warningMike Kofron
[ Upstream commit 94500d5667386119c27725fe314f6882f68580a9 ] drivers/staging/wilc1000/linux_wlan.c:995:18: warning: restricted __be16 degrades to integer Signed-off-by: Mike Kofron <mpkofron@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21staging: rtl8712: fixed little endian problemJannik Becher
[ Upstream commit 502c80744fcac6b16f28699469c70db499fe2f69 ] Fixed a sparse warning. Using function le16_to_cpus() to avoid double assignment. Signed-off-by: Jannik Becher <becher.jannik@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: do not disable FEC from the driverEmil Tantilov
[ Upstream commit 1fe954b2097bb907b4578e6a74e4c1d23785a601 ] FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: add mask for 64 RSS queuesEmil Tantilov
[ Upstream commit 2bf1a87b903bd81b1448a1cef73de59fb6c4d340 ] The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: Reduce I2C retry count on X550 devicesTony Nguyen
[ Upstream commit 3f0d646b720d541309b11e190db58086f446f41e ] A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: Fix reporting of 100Mb capabilityTony Nguyen
[ Upstream commit f215266470dfe86196a31fe0725a86cea77f9a18 ] BaseT adapters that are capable of supporting 100Mb are not reporting this capability. This patch corrects the reporting so that 100Mb is shown as supported on those adapters. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: handle close/suspend race with netif_device_detach/presentEmil Tantilov
[ Upstream commit f7f37e7ff2b9b7eff7fbd035569cab35896869a3 ] When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: fix AER error handlingEmil Tantilov
[ Upstream commit 126db13fa0e6d05c9f94e0125f61e773bd5ab079 ] Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21ixgbe: Configure advertised speeds correctly for KR/KX backplaneDon Skidmore
[ Upstream commit 54f6d4c42451dbd2cc7e0f0bd8fc3eddcab511fe ] This patch ensures that the advertised link speeds are configured for X553 KR/KX backplane. Without this patch the link remains at 1G when resuming from low power after being downshifted by LPLU. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomapArvind Yadav
[ Upstream commit 4b0ea93f250afc6c1128e201b0a8a115ae613e47 ] Here, pci_iomap can fail, handle this case and return -ENOMEM. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21backlight: adp5520: Fix error handling in adp5520_bl_probe()Alexey Khoroshilov
[ Upstream commit 0eb3fba8c68275f0122f65f7316efaaf86448016 ] If adp5520_bl_setup() fails, sysfs group left unremoved. By the way, fix overcomplicated assignement of error code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21backlight: lcd: Fix race condition during registerUwe Kleine-König
[ Upstream commit cc21942bce652d1a92dae85b785378256e1df1f7 ] Once device_register is called for a device its attributes might be accessed. As the callbacks of a lcd device's attributes make use of the lcd_ops, the respective member must be setup before calling device_register. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIASJarkko Nikula
[ Upstream commit 42f7f3c4811b3149253ecf2e133832c969884466 ] Add module alias for Sony ACX565AKM LCD panel. This makes it probe on Nokia N900 when panel driver is built as a module. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21power: supply: axp288_fuel_gauge: Read 12 bit values 2 registers at a timeHans de Goede
[ Upstream commit 248efcf00602f0282587999bcc221a872bd72530 ] In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 12 bit value in one consecutive read. This fixes voltage_ocv reporting inconsistent values on my tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21power: supply: axp288_fuel_gauge: Read 15 bit values 2 registers at a timeHans de Goede
[ Upstream commit 4949fc5e071f8e8d8122e0b16cf6a2ec1ca36258 ] In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 15 bit value in one consecutive read. This fixes charge_full reporting 3498768 on some reads and 3354624 one other reads on my tablet (for the 3354624 value the raw LSB is 0x00). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21rtc: rx8010: change lock mechanismFabien Lahoudere
[ Upstream commit 666b5d1e9f8762300a410f9548b6e370d71dd382 ] Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead. spin_lock_irqsave() is not needed here because we do not have hard IRQs. This patch fixes the following issue: root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc [ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 [ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 [ 82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20 [ 82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 82.135609] Backtrace: [ 82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24) [ 82.145664] r7:ec936000 r6:600a0013 r5:00000000 r4:81031680 [ 82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8) [ 82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc) [ 82.165775] r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c [ 82.173691] r4:e5033e00 r3:00000000 [ 82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130) [ 82.185314] r5:edb4899c r4:edb4899c [ 82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54) [ 82.198333] r5:edb4899c r4:600a0013 [ 82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188) [ 82.211261] r5:00000020 r4:edb48990 [ 82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104) [ 82.222801] r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c [ 82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674) [ 82.236368] r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00 [ 82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c) [ 82.249851] r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74 [ 82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c) [ 82.263953] r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003 [ 82.271869] r4:ed1e9c80 [ 82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c) [ 82.282005] r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc root@GE004097290448 b850v3:~# Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 hwclock --systohc root@GE004097290448 b850v3:~# Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payloadJames Smart
[ Upstream commit e0165f20447c8ca1d367725ee94d8ec9f38ca275 ] Clear the VendorVersion in the PLOGI/PLOGI ACC payload Vendor version info may have been set on fabric login. Before sending PLOGI payloads, ensure that it's cleared. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21scsi: lpfc: Correct issue leading to oops during link resetJames Smart
[ Upstream commit e6c6acc0e0223ddaf867628d420ee196349c6fae ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21scsi: lpfc: Correct host name in symbolic_name fieldJames Smart
[ Upstream commit 6c9231f604c2575be24c96d38deb70f145172f92 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21scsi: lpfc: FCoE VPort enable-disable does not bring up the VPortJames Smart
[ Upstream commit 104450eb08ca662e6b1d02da11aca9598e978f3e ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-05 02:17:19 +0000