summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-07-25Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard
2011-07-25drm/i915: Hold mode_config->mutex during hotplug processingKeith Packard
Hotplug detection is a mode setting operation and must hold the struct_mutex or risk colliding with other mode setting operations. In particular, the display port hotplug function attempts to re-train the link if the monitor is supposed to be running when plugged back in. If that happens while mode setting is underway, the link will get scrambled, leaving it in an inconsistent state. This is a special case -- usually the driver mode setting entry points are covered by the upper level DRM code, but in this case the function is invoked as a work function not under the control of DRM. Signed-off-by: Keith Packard <keithp@keithp.com> Cc: stable@kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-25drm/i915/dp: Explicitly request 8/10 channel codingAdam Jackson
It's not clear what a sink would do if you wrote zero to this register - which I guess would mean "I don't support any channel encodings, good luck" - but let's not find out. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-25drm/i915/dp: Retry DPCD fetch on G4X tooAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-25drm/i915/dp: Better hexdump of DPCDAdam Jackson
%hx alone prints 0 as "0", not "00". Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-25drm/i915/dp: Read more DPCD registers on connection probeAdam Jackson
For parity with radeon and nouveau, and also because I suspect we're going to need it to get format-conversion dongles right. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-25drm/i915/dp: Move DPCD dump to common code instead of PCH-onlyAdam Jackson
No reason not to see this on g4x, after all. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-25drm/i915/dp: Zero the DPCD data before connection probeAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-22Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard
2011-07-22drm/i915: load the LUT before pipe enable on ILK+Jesse Barnes
Per the specs and to address https://bugs.freedesktop.org/show_bug.cgi?id=36888. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-22drm/i915: Initialize RCS ring status page address in intel_render_ring_init_driKeith Packard
Physically-addressed hardware status pages are initialized early in the driver load process by i915_init_phys_hws. For UMS environments, the ring structure is not initialized until the X server starts. At that point, the entire ring structure is re-initialized with all new values. Any values set in the ring structure (including ring->status_page.page_addr) will be lost when the ring is re-initialized. This patch moves the initialization of the status_page.page_addr value to intel_render_ring_init_dri. Signed-off-by: Keith Packard <keithp@keithp.com> Cc: stable@kernel.org
2011-07-21drm/i915: Skip GPU wait for scanout pin while wedgedKeith Packard
Failing to pin a scanout buffer will most likely lead to a black screen, so if the GPU is wedged, then just let the pin happen and hope that things work out OK. v2: Just ignore any error from i915_gem_object_wait_rendering, as suggested by Chris Wilson Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-21drm/i915: provide more error output when mode sets failJesse Barnes
If a mode set fails we may get a message from drm_crtc_helper if we're lucky, but it won't tell us anything about *why* we failed to set a mode. So add a few DRM_ERRORs for the cases that shouldn't happen so we can debug things more easily. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-21Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix unfenced alignment on pre-G33 hardware drm/i915: Add quirk to disable SSC on Lenovo U160 LVDS
2011-07-18drm/i915: Fix unfenced alignment on pre-G33 hardwareChris Wilson
Align unfenced buffers on older hardware to the power-of-two object size. The docs suggest that it should be possible to align only to a power-of-two tile height, but using the already computed fence size is easier and always correct. We also have to make sure that we unbind misaligned buffers upon tiling changes. In order to prevent a repetition of this bug, we change the interface to the alignment computation routines to force the caller to provide the requested alignment and size of the GTT binding rather than assume the current values on the object. Reported-and-tested-by: Sitosfe Wheeler <sitsofe@yahoo.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36326 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: pppoe: Must flush connections when MAC address changes too. include/linux/sdla.h: remove the prototype of sdla() tulip: dmfe: Remove old log spamming pr_debugs
2011-07-18pppoe: Must flush connections when MAC address changes too.David S. Miller
Kernel bugzilla: 39252 Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18tulip: dmfe: Remove old log spamming pr_debugsJoe Perches
Commit 726b65ad444d ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef1679 ("tulip/dmfe.c: Use dev_<level> and pr_<level>"). Remove these pr_debugs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18si4713-i2c: avoid potential buffer overflow on si4713Mauro Carvalho Chehab
While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (max1111) Fix race condition causing NULL pointer exception hwmon: (it87) Fix label group removal hwmon: (asus_atk0110) Fix memory leak
2011-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Bluetooth: Fix crash with incoming L2CAP connections Bluetooth: Fix regression in L2CAP connection procedure gianfar: rx parser r6040: only disable RX interrupt if napi_schedule_prep is successful net: remove NETIF_F_ALL_TX_OFFLOADS net: sctp: fix checksum marking for outgoing packets
2011-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt depends on PCI watchdog: fix hpwdt Kconfig regression in 3.0-rc
2011-07-17Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] tuner-core: fix a 2.6.39 regression with mt20xx [media] dvb_frontend: fix race condition in stopping/starting frontend [media] media: fix radio-sf16fmr2 build when SND is not enabled [media] MEDIA: Fix non-ISA_DMA_API link failure of sound code [media] nuvoton-cir: make idle timeout more sane [media] mceusb: increase default timeout to 100ms [media] mceusb: Timeout unit corrections [media] Revert "V4L/DVB: cx23885: Enable Message Signaled Interrupts(MSI)"
2011-07-17Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Fixes device power states array overflow ACPI, APEI, HEST, Detect duplicated hardware error source ID ACPI: Fix lockdep false positives in acpi_power_off()
2011-07-17hwmon: (max1111) Fix race condition causing NULL pointer exceptionPavel Herrmann
spi_sync call uses its spi_message parameter to keep completion information, using a drvdata structure is not thread-safe. Use a mutex to prevent multiple access to shared driver data. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Cyril Hrubis <metan@ucw.cz> Tested-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-07-17hwmon: (it87) Fix label group removalJean Delvare
A copy-and-paste error caused it87_attributes_vid to be referenced where it87_attributes_label should be. Thankfully the group is only used for attribute removal, not attribute creation, so the effects of this bug are limited, but let's fix it still. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-17hwmon: (asus_atk0110) Fix memory leakLuca Tettamanti
The object returned by atk_gitm is dynamically allocated and must be freed. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-07-17watchdog: hpwdt depends on PCIRandy Dunlap
hpwdt is a PCI driver so it should depend on PCI. Fixes these build errors: drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap' drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
2011-07-16watchdog: fix hpwdt Kconfig regression in 3.0-rcOlaf Hering
Remove Kconfig regression caused by commit a4616153deae053b29a2b7dd9ec4b2a225accfc5 "watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled" With the above change applied, hpwdt will be enabled unconditionally by just entering the Watchdog subscreen in menuconfig. Since this driver is not essential to boot any box it should remain disabled until it gets manually enabled, just like all other drivers. Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-07-15Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: wm831x: add a missing break in wm831x_gpio_dbg_show
2011-07-15gianfar: rx parserSebastian Pöhn
Only let the rx parser be enabled if it is necessary (if VLAN extraction, IP or TCP checksumming or the rx queue filer are enabled). Otherwise disable it. The new routine gfar_check_rx_parser_mode should be run after every change on this features and will enable/disable the parser as necessary. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-15gpio: wm831x: add a missing break in wm831x_gpio_dbg_showAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (adm1275) Fix coefficients per datasheet revision B hwmon: (pmbus) Use long variables for register to data conversions
2011-07-15r6040: only disable RX interrupt if napi_schedule_prep is successfulMichael Thalmeier
When receiving the first RX interrupt before the internal call to napi_schedule_prep is successful the RX interrupt gets disabled and is never enabled again as the poll function never gets executed. Signed-off-by: Michael Thalmeier <Michael.Thalmeier@sigmatek.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-15hwmon: (adm1275) Fix coefficients per datasheet revision BGuenter Roeck
Coefficients to convert chip register values to voltage/current have been slightly changed in revision B of the chip datasheet. Update driver coefficients to match the coefficients in the datasheet. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-15drm: platform multi-device supportRob Clark
Include the device id in the bus-id to give userspace a way to open the correct "cardN" when there are multiple device instances. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-14net: remove NETIF_F_ALL_TX_OFFLOADSMichał Mirosław
There is no software fallback implemented for SCTP or FCoE checksumming, and so it should not be passed on by software devices like bridge or bonding. For VLAN devices, this is different. First, the driver for underlying device should be prepared to get offloaded packets even when the feature is disabled (especially if it advertises it in vlan_features). Second, devices under VLANs do not get replaced without tearing down the VLAN first. This fixes a mess I accidentally introduced while converting bonding to ndo_fix_features. NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they are unused as of commit 712ae51afd. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13drm/i915: Add quirk to disable SSC on Lenovo U160 LVDSKeith Packard
We've tried several times to make this machine 'just work', but every patch that does causes many other machines to fail. This adds a quirk which special cases this hardware and forces ssc to be disabled. There's no way to override this from the command line; that would be a significantly more invasive change. This patch fixes #36656 on fdo bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36656 Signed-off-by: Keith Packard <keithp@keithp.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=36656 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-07-14drm/radeon: Don't clobber error return value in page flipping cleanup paths.Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-14drm/radeon: Don't generate new fence for page flip.Michel Dänzer
Use the fence of the new frontbuffer, if any. Generating a new fence could cause us to wait for completely unrelated rendering to finish before performing the flip. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-14Merge branch 'drm-intel-next' of ↵Dave Airlie
ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-core-next * 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (52 commits) drm/i915: provide module parameter description drm/i915: add module parameter compiler hints drm/i915/bios: Avoid temporary allocation whilst searching for downclock drm/i915: Cache GT fifo count for SandyBridge i915: Fix opregion notifications drm/i915: TVDAC_STATE_CHG does not indicate successful load-detect drm/i915: Select correct pipe during TV detect drm/i915/ringbuffer: Idling requires waiting for the ring to be empty Revert "drm/i915: enable rc6 by default" drm/i915: Clean up i915_driver_load failure path drm/i915: Enable i915 frame buffer compression by default drm/i915: Share the common work of disabling active FBC before updating drm/i915: Perform intel_enable_fbc() from a delayed task drm/i915: Disable FBC across page-flipping drm/i915: Set persistent-mode for ILK/SNB framebuffer compression drm/i915: Use of a CPU fence is mandatory to update FBC regions upon CPU writes drm/i915: Remove vestigial pitch from post-gen2 FBC control routines drm/i915: Replace direct calls to vfunc.disable_fbc with intel_disable_fbc() drm/i915: Only export the generic intel_disable_fbc() interface drm/i915: Enable GPU reset on Ivybridge. ...
2011-07-14Merge branches 'd3cold', 'bugzilla-37412' and 'bugzilla-38152' into releaseLen Brown
2011-07-13ACPI, APEI, HEST, Detect duplicated hardware error source IDHuang Ying
The firmware on some machine will report duplicated hardware error source ID in HEST. This is considered a firmware bug. To provide better warning message, this patch adds duplicated hardware error source ID detecting and corresponding printk. This patch fixes #37412 on kernel bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37412 Reported-by: marconifabio@ubuntu-it.org Signed-off-by: Huang Ying <ying.huang@intel.com> Tested-by: Mathias <janedo.spam@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13drm/i915: provide module parameter descriptionBen Widawsky
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-13drm/i915: add module parameter compiler hintsBen Widawsky
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Bus width testing needs to handle suspend/resume
2011-07-13[media] tuner-core: fix a 2.6.39 regression with mt20xxMauro Carvalho Chehab
As Simon reported, digital TV broke with mt20xx tuner due to commit ad020dc2fe9039628cf6cef42cd1b76531ee8411. The mt20xx tuner passes V4L2_TUNER_DIGITAL_TV to tuner core. However, the check_mode code now doesn't handle it well. Change the logic there to avoid the breakage, and fix a test for analog-only at g_tuner. Reported-by: Simon Arlott <simon@fire.lp0.eu> Tested-by: Simon Arlott <simon@fire.lp0.eu> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-13[media] dvb_frontend: fix race condition in stopping/starting frontendDevin Heitmueller
Attached is a patch which addresses a race condition in the DVB core related to closing/reopening the DVB frontend device in quick succession. This is the reason that devices such as the HVR-1300, HVR-3000, and HVR-4000 have been failing to scan properly under MythTV and w_scan. The gory details of the race are described in the patch. Devin There is a race condition exhibited when channel scanners such as w_scan and MythTV quickly close and then reopen the frontend device node. Under normal conditions, the behavior is as follows: 1. Application closes the device node 2. DVB frontend ioctl calls dvb_frontend_release which sets fepriv->release_jiffies 3. DVB frontend thread *eventually* calls dvb_frontend_is_exiting() which compares fepriv->release_jiffies, and shuts down the thread if timeout has expired 4. Thread goes away 5. Application opens frontend device 6. DVB frontend ioctl() calls ts_bus_ctrl(1) 7. DVB frontend ioctl() creates new frontend thread, which calls dvb_frontend_init(), which has demod driver init() routine setup initial register state for demod chip. 8. Tuning request is issued. The race occurs when the application in step 5 performs the new open() call before the frontend thread is shutdown. In this case the ts_bus_ctrl() call is made, which strobes the RESET pin on the demodulator, but the dvb_frontend_init() function never gets called because the frontend thread hasn't gone away yet. As a result, the initial register config for the demod is *never* setup, causing subsequent tuning requests to fail. If there is time between the close and open (enough for the dvb frontend thread to be torn down), then in that case the new frontend thread is created and thus the dvb_frontend_init() function does get called. The fix is to set the flag which forces reinitialization if we did in fact call ts_bus_ctrl(). This problem has been seen on the HVR-1300, HVR-3000, and HVR-4000, and is likely occuring on other designs as well where ts_bus_ctrl() actually strobes the reset pin on the demodulator. Note that this patch should supercede any patches submitted for the 1300/3000/4000 which remove the code that removes GPIO code in cx8802_dvb_advise_acquire(), which have been circulating by users for some time now... Canonical tracking this issue in Launchpad 439163: Thanks to Jon Sayers from Hauppauge and Florent Audebert from Anevia S.A. for providing hardware to test/debug with. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Jon Sayers <j.sayers@hauppauge.co.uk> Cc: Florent Audebert <florent.audebert@anevia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-13[media] media: fix radio-sf16fmr2 build when SND is not enabledRandy Dunlap
When CONFIG_SND is not enabled, radio-sf16fmr2 build fails with: so make this driver depend on SND. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-13Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M drm/radeon/kms: fix typo in read_disabled vbios code drm/radeon/kms: use correct BUS_CNTL reg on rs600 drm/radeon/kms: fix backend map typo on juniper drm/radeon/kms: fix regression in hotplug
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-06 04:59:43 +0000