summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-07-23tty: serial: msm: Make of_device_id array constKiran Padwal
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23tty/n_gsm.c: get gsm->num after gsm_activate_muxxinhui.pan
gsm->num is the index of gsm_mux[], it's invalid before calling gsm_activate_mux. Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23serial/core: Fix too big allocation for attribute memberYoshihiro YUNOMAE
Current code allocates too much data for tty_groups member of uart_port struct, so fix it. Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-22drivers/tty/serial: use correct type for dma_map/unmapWolfram Sang
dma_{un}map_* uses 'enum dma_data_direction' not 'enum dma_transfer_direction'. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-22serial: altera_jtaguart: Fix putchar function passed to uart_console_write()Tobias Klauser
Commit 3d1c90d48cbe335a ("serial: altera_jtaguart: Adpot uart_console_write()") introduced the usage of uart_console_write() but didn't change the signature of altera_jtaguart_console_putc() to take a pointer to struct uart_port instead of struct console, breaking the driver's console support and leading to the following warning: > drivers/tty/serial/altera_jtaguart.c: In function 'altera_jtaguart_console_write': > >> drivers/tty/serial/altera_jtaguart.c:350:2: warning: passing argument 4 of 'uart_console_write' from incompatible pointer type [enabled by default] > uart_console_write(port, s, count, altera_jtaguart_console_putc); > ^ > In file included from drivers/tty/serial/altera_jtaguart.c:25:0: > include/linux/serial_core.h:317:6: note: expected 'void (*)(struct uart_port *, int)' but argument is of type 'void (*)(struct console *, int)' > void uart_console_write(struct uart_port *port, const char *s, Fix this by adjusting the signature of altera_jtaguart_console_putc() accordingly. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffersYoshihiro YUNOMAE
Add tunable RX interrupt trigger I/F of FIFO buffers. Serial devices are used as not only message communication devices but control or sending communication devices. For the latter uses, normally small data will be exchanged, so user applications want to receive data unit as soon as possible for real-time tendency. If we have a sensor which sends a 1 byte data each time and must control a device based on the sensor feedback, the RX interrupt should be triggered for each data. According to HW specification of serial UART devices, RX interrupt trigger can be changed, but the trigger is hard-coded. For example, RX interrupt trigger in 16550A can be set to 1, 4, 8, or 14 bytes for HW, but current driver sets the trigger to only 8bytes. This patch makes some devices change RX interrupt trigger from userland. <How to use> - Read current setting # cat /sys/class/tty/ttyS0/rx_trig_bytes 8 - Write user setting # echo 1 > /sys/class/tty/ttyS0/rx_trig_bytes # cat /sys/class/tty/ttyS0/rx_trig_bytes 1 <Support uart devices> - 16550A and Tegra (1, 4, 8, or 14 bytes) - 16650V2 (8, 16, 24, or 28 bytes) - 16654 (8, 16, 56, or 60 bytes) - 16750 (1, 16, 32, or 56 bytes) <Change log> Changes in V9: - Use attr_group instead of dev_spec_attr_group of uart_port structure Changes in V8: - Divide this patch from V7's patch based on Greg's comment Changes in V7: - Add Documentation - Change I/F name from rx_int_trig to rx_trig_bytes because the name rx_int_trig is hard to understand how users specify the value Changes in V6: - Move FCR_RX_TRIG_* definition in 8250.h to include/uapi/linux/serial_reg.h, rename those to UART_FCR_R_TRIG_*, and use UART_FCR_TRIGGER_MASK to UART_FCR_R_TRIG_BITS() - Change following function names: convert_fcr2val() => fcr_get_rxtrig_bytes() convert_val2rxtrig() => bytes_to_fcr_rxtrig() - Fix typo in serial8250_do_set_termios() - Delete the verbose error message pr_info() in bytes_to_fcr_rxtrig() - Rename *rx_int_trig/rx_trig* to *rxtrig* for several functions or variables (but UI remains rx_int_trig) - Change the meaningless variable name 'val' to 'bytes' following functions: fcr_get_rxtrig_bytes(), bytes_to_fcr_rxtrig(), do_set_rxtrig(), do_serial8250_set_rxtrig(), and serial8250_set_attr_rxtrig() - Use up->fcr in order to get rxtrig_bytes instead of rx_trig_raw in fcr_get_rxtrig_bytes() - Use conf_type->rxtrig_bytes[0] instead of switch statement for support check in register_dev_spec_attr_grp() - Delete the checking whether a user changed FCR or not when minimum buffer is needed in serial8250_do_set_termios() Changes in V5.1: - Fix FCR_RX_TRIG_MAX_STATE definition Changes in V5: - Support Tegra, 16650V2, 16654, and 16750 - Store default FCR value to up->fcr when the port is first created - Add rx_trig_byte[] in uart_config[] for each device and use rx_trig_byte[] in convert_fcr2val() and convert_val2rxtrig() Changes in V4: - Introduce fifo_bug flag in uart_8250_port structure This is enabled only when parity is enabled and UART_BUG_PARITY is enabled for up->bugs. If this flag is enabled, user cannot set RX trigger. - Return -EOPNOTSUPP when it does not support device at convert_fcr2val() and at convert_val2rxtrig() - Set the nearest lower RX trigger when users input a meaningless value at convert_val2rxtrig() - Check whether p->fcr is existing at serial8250_clear_and_reinit_fifos() - Set fcr = up->fcr in the begging of serial8250_do_set_termios() Changes in V3: - Change I/F from ioctl(2) to sysfs(rx_int_trig) Changed in V2: - Use _IOW for TIOCSFIFORTRIG definition - Pass the interrupt trigger value itself Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17Serial: allow port drivers to have a default attribute groupGreg Kroah-Hartman
Some serial drivers (like 8250), want to add sysfs files. We need to do so in a race-free way, so allow any port to be able to specify an attribute group that should be added at device creation time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17tty: kgdb_nmi: Automatically manage tty enableDaniel Thompson
At present it is not possible to boot with the ttyNMI0 console treating character input normally, instead character input triggers a prompt telling the user how to trigger the knock detector and enter the debugger. To use the console normally requires that kdb be entered and the nmi_console command be used to enable the console (or if only kgdb is present then gdb must directly manipulate the value of kgdb_nmi_tty_enabled). This patch automates the management of kgdb_nmi_tty_enabled by keeping track of the number of file handles that are open for reading and using that to determine how to tty should operate. The approach means that: 1. Behaviour before init starts is unchanged. 2. If the userspace runs a getty or some other interactive process on /dev/console (or explicitly on /dev/ttyNMI0) the tty will treat character input like any other tty. 3. If the userspace doesn't use /dev/console or if it uses /dev/console only to log messages (O_WRONLY) then the user prompt is retained. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: altera_jtaguart: Adpot uart_console_write()Tobias Klauser
Follow commit 2970b7f5ea3c ("serial: altera: Adopt uart_console_write()") and don't open code the LF to LFCR conversion in altera_jtaguart either. Use uart_console_write() instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: samsung: improve code clarity by defining a variableNaveen Krishna Chatradhi
The of_node is derived from pdev for every usage, define a device_node variable instead. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: samsung: correct the case and default order in switchNaveen Krishna Chatradhi
The cases should comes before default in a switch. Even if we want the case and default to share same code. Its good to define the case first followed by default. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: samsung: get fifosize via device treeNaveen Krishna Chatradhi
UART modules on some SoCs only differ in the fifosize of each UART channel. Its useless to duplicate the drv_data structure or create a compatible name for such a change. We can get fifosize via the device tree nodes (not mandating it). Also updates the documentation. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: 8250: introduce up_to_u8250p() helperAndy Shevchenko
It helps to cast struct uart_port to struct uart_8250_port at runtime. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17tty: serial: fsl_lpuart: add 32-bit register interface supportJingchang Lu
This add the 32-bit register version LPUART support with big-endian byte order. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: sh-sci: Add calculation recive margin for HSCIFNobuhiro Iwamatsu
When the error of the same bit rate is detected, we will need to select the recive margin is large. Current code holds the minimum error, it does not have to check the recive margin. This adds this calculation. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: sh-sci: Fix range check of bit-rate for HSCIFNobuhiro Iwamatsu
If bit-rate calculation result of HSCIF is expect 255 from 0, driver does not calculate error bit. However, we need to round the value to calculate error bit in the case of negative value. This rounds the value of bit-rate using clamp(), and bit-rate is the case of negative value, it enables the calculation of the error bit. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: sh-sci: Updated calculation of bit error rate and bit rateNobuhiro Iwamatsu
Currently, the decimal point is discarded calculation of BRR. Therefore, it can not calculate a value close to the correct value. This patch fixes this problem by using DIV_ROUND_CLOSEST. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13Merge 3.16-rc5 into tty-next.Greg Kroah-Hartman
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock driver fixes from Mike Turquette: "This batch of fixes is for a handful of clock drivers from Allwinner, Samsung, ST & TI. Most of them are of the "this hardware won't work without this fix" variety, including patches that fix platforms that did not boot under certain configurations. Other fixes are the result of changes to the clock core introduced in 3.15 that had subtle impacts on the clock drivers. There are no fixes to the clock framework core in this pull request" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: spear3xx: Set proper clock parent of uart1/2 clk: spear3xx: Use proper control register offset clk: qcom: HDMI source sel is 3 not 2 clk: sunxi: fix devm_ioremap_resource error detection code clk: s2mps11: Fix double free corruption during driver unbind clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: exynos5420: Remove aclk66_peric from the clock tree description clk/exynos5250: fix bit number for tv sysmmu clock clk: s3c64xx: Hookup SPI clocks correctly clk: samsung: exynos4: Remove SRC_MASK_ISP gates clk: samsung: add more aliases for s3c24xx clk: samsung: fix several typos to fix boot on s3c2410 clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: ti: dra7: return error code in failure case clk: ti: apll: not allocating enough data
2014-07-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - Another set of OMAP fixes * Clock fixes * Restart handling * PHY regulators * SATA hwmod data for DRA7 + Some trivial fixes and removal of a bit of dead code - Exynos fixes * A bunch of clock fixes * Some SMP fixes * Exynos multi-core timer: register as clocksource and fix ftrace. + a few other minor fixes There's also a couple more patches, and at91 fix for USB caused by common clock conversion, and more MAINTAINERS entries for shmobile. We're definitely switching to only regression fixes from here on out, we've been a little less strict than usual up until now" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: at91: at91sam9x5: add clocks for usb device ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: OMAP2+: Remove non working OMAP HDMI audio initialization ARM: imx: fix shared gate clock ARM: dts: Update the parent for Audss clocks in Exynos5420 ARM: EXYNOS: Update secondary boot addr for secure mode ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio ARM: dts: am335x-evm: Enable the McASP FIFO for audio ARM: OMAP2+: Make GPMC skip disabled devices ARM: OMAP2+: create dsp device only on OMAP3 SoCs ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on ARM: DRA7/AM43XX: fix header definition for omap44xx_restart ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss ARM: DRA7: hwmod: Fixup SATA hwmod ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver ...
2014-07-13clk: spear3xx: Set proper clock parent of uart1/2Thomas Gleixner
The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: spear3xx: Use proper control register offsetThomas Gleixner
The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-12Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "We have two small fixes. First one from Daniel to handle 0-length packets for usb cppi dma. Second by Russell for imx-sdam cyclic residue reporting" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: Update imx-sdma cyclic handling to report residue dma: cppi41: handle 0-length packets
2014-07-12Merge tag 'samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-3 for 3.16" from Kukjin Kim: Samsung fixes-3 for v3.16 - update the parent for Auudss clock because kernel will be hang during late boot if the parent clock is disabled in bootloader. - enable clk handing in power domain because while power domain on/off, its regarding clock source will be reset and it causes a problem so need to handle it. - add mux clocks to be used by power domain for exynos5420-mfc during power domain on/off and property in device tree also. - register cpuidle only for exynos4210 and exynos5250 because a system failure will be happened on other exynos SoCs. * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: dts: Update the parent for Audss clocks in Exynos5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12drivers: tty: Fix use-after-free in pty_common_installRasmus Villemoes
In 2c964a2f "drivers: tty: Merge alloc_tty_struct and initialize_tty_struct", I messed up the refactorization of pty_common_install, causing use-after-free and NULL pointer derefs on various error paths. This should fix it. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-12Merge tag 'usb-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes, PHY driver fixes (they ended up in this tree for lack of somewhere else to put them), and some new USB device ids" * tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard USB: ftdi_sio: Add extra PID. usb: option: Add ID for Telewell TW-LTE 4G v2 USB: cp210x: add support for Corsair usb dongle
2014-07-12Merge tag 'tty-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial fixes that resolve some reported problems that started in 3.15 with some serial drivers. And there's a new dt binding for a serial driver, which was all that was needed for the renesas serial driver" * tag 'tty-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 serial: imx: Fix build breakage serial: arc_uart: Use uart_circ_empty() for open-coded comparison serial: Test for no tx data on tx restart
2014-07-12Merge tag 'char-misc-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two hyperv driver fixes, and one i8k driver fix for 3.16" * tag 'char-misc-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: i8k: Fix non-SMP operation Drivers: hv: util: Fix a bug in the KVP code Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code
2014-07-12Merge tag 'staging-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are some IIO driver fixes for 3.16-rc5. Nothing major, just resolves some minor issues that have been reported" * tag 'staging-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends iio:tcs3472: Check for buffer enabled and locking iio: hid-sensor-prox: Fix return values iio: hid-sensor-gyro-3d: Fix return values iio: hid-sensor-als: Fix return values iio: hid-sensor-magn-3d: Fix return values iio: hid-sensor-accel-3d: Fix return values iio: hid-sensor-press: Fix return values
2014-07-11phy: omap-usb2: Balance pm_runtime_enable() on probe failure and removeRoger Quadros
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: core: Fix error path in phy_create()Roger Quadros
Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLESjoerd Simons
Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: omap-usb2: fix devm_ioremap_resource error detection codeHimangi Saraogi
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: sun4i: depend on RESET_CONTROLLERMaxime Ripard
The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka
This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11drivers: tty: Merge alloc_tty_struct and initialize_tty_structRasmus Villemoes
The two functions alloc_tty_struct and initialize_tty_struct are always called together. Merge them into alloc_tty_struct, updating its prototype and the only two callers of these functions. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11serial: pch_uart: Update error message for dmaengine_prep_slave_sg() APIGeert Uytterhoeven
Commit 16052827d98fbc13c31ebad560af4bd53e2b4dd5 ("dmaengine/dma_slave: introduce inline wrappers") changed the code to use the new API, but forgot to update an error message. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-serial@vger.kernel.org -- v2: - New Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11serial/arc: Fix warning with CONSOLE_POLLVineet Gupta
| drivers/tty/serial/arc_uart.c:516:2: warning: (near initialization for 'arc_serial_pops.poll_put_char') [enabled by default] This partially undoes "serial/arc: use uart_console_write() helper" by restoring the prototpye of poll helper and use a different one in uart_console_write() Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11serial: altera: Adopt uart_console_write()Daniel Thompson
This driver does not currently use uart_console_write() and instead provides is own LF to LFCR conversion in it's console_write() method. We should use the library function instead. Cmopile tested only (with ARCH=arm). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11serial: efm32: correct namespacing of location propertyUwe Kleine-König
Olof Johansson pointed out that usually the company name is picked as namespace prefix to specific properties. So expect "energymicro,location" but fall back to the previously introduced name "efm32,location". Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11serial: imx: Fix build breakagePeter Hurley
Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11Merge tag 'dm-3.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM multipath IO hang regression from 3.15 due to logic bug in multipath_busy. This impacted cable-pull testing and also the ability to boot with IPR SCSI on a POWER8 box. - Fix possible deadlock with deferred device removal by using a new dedicated workqueue rather than using the system workqueue. - Fix NULL pointer crash due to race condition in dm-io's wake up code for sync_io by using a completion. - Update dm-crypt and dm-zero author name following legal name change; this is important to Jana so I didn't see any reason to hold it back. * tag 'dm-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: fix IO hang due to logic bug in multipath_busy dm io: fix a race condition in the wake up code for sync_io dm crypt, dm zero: update author name following legal name change dm: allocate a special workqueue for deferred device removal
2014-07-10Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too scary, we have one outstanding i915 regression but Daniel has promised the fix as soon as he's finished testing it a bit. Fixes for the main x86 drivers: - radeon: dpm fixes, displayport regression fix - i915: quirks for backlight regression, edp reboot fix, valleyview black screen fixes - nouveau: display port regression fixes, fix for memory reclocking" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/dpm: Reenabling SS on Cayman drm/radeon: fix typo in ci_stop_dpm() drm/radeon: fix typo in golden register setup on evergreen drm/radeon: only print meaningful VM faults drm/radeon/dp: return -EIO for flags not zero case drm/i915/vlv: T12 eDP panel timing enforcement during reboot drm/i915: Only unbind vgacon, not other console drivers drm/i915: Don't clobber the GTT when it's within stolen memory drm/i915/vlv: Update the DSI ULPS entry/exit sequence drm/i915/vlv: DPI FIFO empty check is not needed drm/i915: Toshiba CB35 has a controllable backlight drm/i915: Acer C720 and C720P have controllable backlights drm/i915: quirk asserts controllable backlight presence, overriding VBT drm/nouveau/ram: fix test for gpio presence drm/nouveau/dp: workaround broken display drm/nouveau/dp: fix required link bandwidth calculations drm/nouveau/kms: restore fbcon after display has been resumed drm/nv50-/kms: pass a non-zero value for head to sor dpms methods drm/nouveau/fb: Prevent inlining of ramfuc_reg drm/gk104/ram: bash mpll bit 31 on
2014-07-10Merge tag 'pm+acpi-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are a few regression fixes for ACPI device enumeration and resources management, intel_pstate and cpufreq, a revert of an ACPI commit removing user space interfaces in /proc that we incorrectly thought were not used any more, fixes for some long-standing concurrency issues in the ACPI EC driver, two ACPI battery driver fixes, stable-candidate fixes for intel_pstate, an ACPI-related fix for i915 and two new ACPI video blacklist entries for Win8-oriented BIOSes. Specifics: - Missing device ID for ACPI enumeration of PNP devices that we overlooked during the recent rework of that code from Zhang Rui. - Fix for a problem introduced during the 3.14 cycle in the ACPI device resources management code and causing it to reject all resources of length 0 although some of them are actually valid which affects serial ports detection on a number of systems. From Andy Whitcroft. - intel_pstate fix for a boot problem on some BayTrail-based systems introduced by a previous fix related to that platform during the 3.13 cycle from Dirk Brandewie. - Revert of a 3.13 commit that removed the ACPI AC /proc interface which turns out to be still needed by some old utilities (kpowersave from kde 3.5.10 in particular) from Lan Tianyu. - cpufreq build fix for the davinci ARM platform from Prabhakar Lad (the breakage was introduced during the 3.10 cycle). - ACPI-related i915 fix preventing firmware on some Thinkpad laptops from setting backlight levels incorrectly during AC plug/unplug. From Aaron Lu. - Fixes for two nasty race conditions in the ACPI embedded controller driver that may be responsible for a number of past bug reports related to the EC from Lv Zhang and a fix for two memory leaks in error code paths in that driver from Colin Ian King. - Fixes for a couple of corner-case issues in the intel_pstate driver (all candidates for -stable) from Dirk Brandewie and Vincent Minet. - Fixes for two corner-case issues in the ACPI battery driver from Josef Gajdusek and Lan Tianyu. - Two new ACPI video blacklist entries for Acer TravelMate B113 and Dell Inspiron 5737 from Edward Lin and Martin Kepplinger" * tag 'pm+acpi-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PNP: add soc_button_array device ID to PNP IDs list cpufreq: Makefile: fix compilation for davinci platform ACPI / video: Add Acer TravelMate B113 to native backlight blacklist ACPI / video: Add Dell Inspiron 5737 to the blacklist ACPI / i915: ignore firmware requests for backlight change ACPI / battery: fix wrong value of capacity_now reported when fully charged ACPI / resources: only reject zero length resources based at address zero ACPI / battery: Retry to get battery information if failed during probing ACPI / EC: Free saved_ec on error exit path ACPI / EC: Add detailed fields debugging support of EC_SC(R). ACPI / EC: Update revision due to recent changes ACPI / EC: Fix race condition in ec_transaction_completed() ACPI / EC: Remove duplicated ec_wait_ibf0() waiter ACPI / EC: Add asynchronous command byte write support ACPI / EC: Avoid race condition related to advance_transaction() intel_pstate: Set CPU number before accessing MSRs intel_pstate: Update documentation of {max,min}_perf_pct sysfs files intel_pstate: don't touch turbo bit if turbo disabled or unavailable. intel_pstate: Fix setting VID Revert "ACPI / AC: Remove AC's proc directory."
2014-07-10serial: arc_uart: Use uart_circ_empty() for open-coded comparisonPeter Hurley
Replace open-coded test for empty tx ring buffer with equivalent helper function, uart_circ_empty(). No functional change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: Test for no tx data on tx restartPeter Hurley
Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Seth Bollinger <sethb@digi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 3.15 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10tty: serial: msm: Support big-endian CPUsStephen Boyd
To support big-endian CPUs use the string versions of the io read/write macros on the TX/RX fifos and the non-raw variants of the readl/writel macros throughout. This way we don't byteswap the characters coming from the fifos but we properly deal with the little-endian nature of the serial hardware while controlling it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: txx9: remove duplicate TXX9_SIFCR_TDIL_MASK defineDan Carpenter
The TXX9_SIFCR_TDIL_MASK define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: blackfin: Fix CTS flow controlPeter Hurley
blackfin uart port drivers mistakenly set the struct uart_port flags bit UPF_BUG_THRE (which only has meaning to the 8250 core) while trying to set ASYNC_CTS_FLOW. Uart port drivers can override termios settings based on actual hardware support in their .set_termios method; the serial core sets the appropriate port flags based on the overrides. Overriding only the initial termios settings is accomplished by only perform those overrides if the old termios parameter is NULL. CC: Sonic Zhang <sonic.zhang@analog.com> CC: adi-buildroot-devel@lists.sourceforge.net Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10tty: serial: Fix termios/port flags mismatchPeter Hurley
Uart port drivers may reconfigure termios settings based on available hardware support; set/clear ASYNC_CTS_FLOW and ASYNC_CHECK_CD _after_ calling the port driver's .set_termios method. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-06 18:05:16 +0000