summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-03-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
2012-03-03Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
2012-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull from Herbert Xu: "This push fixes a bug in mv_cesa that causes all hash operations that supply data on a final operation to fail." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mv_cesa - fix final callback not ignoring input data
2012-03-02Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging hhwmon fixes for 3.3-rc6 from Guenter Roeck: These patches are necessary for correct operation and management of F75387. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Catch some attempts to write to r/o registers hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable hwmon: (f75375s) Make pwm*_mode writable for the F75387 hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
2012-03-02Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6Linus Torvalds
fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
2012-03-02hwmon: (f75375s) Catch some attempts to write to r/o registersNikolaus Schulz
It makes no sense to attempt to manually configure the fan in auto mode, or set the duty cycle directly in closed loop mode. The corresponding registers are then read-only. If the user tries it nonetheless, error out with EINVAL instead of silently doing nothing. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Minor formatting cleanup] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-02hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enableNikolaus Schulz
The F75387 supports automatic fan control using either PWM duty cycle or RPM speed values. Make the driver detect the latter mode, and expose the different modes in sysfs as per pwm_enable, so that the user can switch between them. The interpretation of the pwm_enable attribute for the F75387 is adjusted to be a superset of those values used for similar Fintek chips which do not support automatic duty mode, with 2 mapping to automatic speed mode, and moving automatic duty mode to the new value 4. Toggling the duty mode via pwm_enable is currently denied for the F75387, as the chip then simply reinterprets the fan configuration register values according to the new mode, switching between RPM and PWM units, which makes this a dangerous operation. This patch introduces a new pwm mode into the driver. This is necessary because the new mode (automatic pwm mode, 4) may already be enabled by the BIOS, and the driver should not break existing functionality. This was seen on at least one board. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-01Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Watchdog updates from Wim Van Sebroeck: * git://www.linux-watchdog.org/linux-watchdog: watchdog: fix GETTIMEOUT ioctl in booke_wdt watchdog: update maintainers git entry watchdog: Fix typo in pnx4008_wdt.c watchdog: Fix typo in Kconfig watchdog: fix error in probe() of s3c2410_wdt (reset at booting) watchdog: hpwdt: clean up set_memory_x call for 32 bit
2012-03-01Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull from Mark Brown: "A simple, driver specific fix. This device isn't widely used outside of Marvell reference boards most of which are probably used with their BSPs rather than with mainline so low risk." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix the ldo configure according to 88pm860x spec
2012-03-01Merge branch 'i2c-embedded/for-3.3' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux-2.6 i2c bugfix from Wolfram Sang: "This patch fixes a wrong assumption in the mxs-i2c-driver about a command queue being done. Without it, we have seen races when the bus was under load." * 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6: i2c: mxs: only flag completion when queue is completely done
2012-03-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
DRM fixes from Dave Airlie: intel: fixes for output regression on 965GM, an oops and a machine hang radeon: uninitialised var (that gcc didn't warn about for some reason) + a couple of correctness fixes. exynos: fixes for various things, drop some chunks of unused code. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv() drm/radeon: fix uninitialized variable drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2) drm/i915: Remove use of the autoreported ringbuffer HEAD position drm/i915: Prevent a machine hang by checking crtc->active before loading lut drm/i915: fix operator precedence when enabling RC6p drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0 drm/i915: fix mode set on load pipe. (v2) drm/exynos: exynos_drm.h header file fixes drm/exynos: added panel physical size. drm/exynos: added postclose to release resource. drm/exynos: removed exynos_drm_fbdev_recreate function. drm/exynos: fixed page flip issue. drm/exynos: added possible_clones setup function. drm/exynos: removed pageflip_event_list init code when closed. drm/exynos: changed priority of mixer layers. drm/exynos: Fix typo in exynos_mixer.c
2012-02-29Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds
Merge virtio pull request from Rusty Russell. * tag 'for-linus' of git://github.com/rustyrussell/linux: virtio: balloon: leak / fill balloon across S4
2012-03-01virtio: balloon: leak / fill balloon across S4Amit Shah
commit e562966dbaf49e7804097cd991e5d3a8934fc148 added support for S4 to the balloon driver. The freeze function did nothing to free the pages, since reclaiming the pages from the host to immediately give them back (if S4 was successful) seemed wasteful. Also, if S4 wasn't successful, the guest would have to re-fill the balloon. On restore, the pages were supposed to be marked freed and the free page counters were incremented to reflect the balloon was totally deflated. However, this wasn't done right. The pages that were earlier taken away from the guest during a balloon inflation operation were just shown as used pages after a successful restore from S4. Just a fancy way of leaking lots of memory. Instead of trying that, just leak the balloon on freeze and fill it on restore/thaw paths. This works properly now. The optimisation to not leak can be added later on after a bit of refactoring of the code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-02-29OMAPDSS: APPLY: make ovl_enable/disable synchronousTomi Valkeinen
ovl->enable/disable are meant to be synchronous so that they can handle the configuration of fifo sizes. The current kernel doesn't configure fifo sizes yet, and so the code doesn't need to block to function (from omapdss driver's perspective). However, for the users of omapdss a non-blocking ovl->disable is confusing, because they don't know when the memory area is not used any more. Furthermore, when the fifo size configuration is added in the next merge window, the change from non-blocking to blocking could cause side effects to the users of omapdss. So by making the functions block already will keep them behaving in the same manner. And, while not the main purpose of this patch, this will also remove the compile warning: drivers/video/omap2/dss/apply.c:350: warning: 'wait_pending_extra_info_updates' defined but not used Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29OMAPDSS: panel-dvi: Add Kconfig dependency on I2CTomi Valkeinen
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29Merge tag 'fixes-3.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Arnd Bergmann says: "Another set of arm-soc bug fixes on top of v3.3-rc5. The few larger bits are all for devices that still need to get set up in board code. Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx." * tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 ARM: OMAP2: fix mailbox init code ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators ARM: OMAP1: Fix out-of-bounds array access for Innovator OMAP3 EVM: remove out-of-bounds array access of gpio_leds ARM: OMAP: Fix build error when mmc_omap is built as module ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module pxa/hx4700: add platform device and I2C info for AK4641 codec arch/arm/mach-pxa/: included linux/gpio.h twice arch/arm/mach-mmp/: some files include some headers twice ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe ARM: pxa: fix including linux/gpio.h twice ARM: pxa: fix mixed declarations and code in sharpsl_pm ARM: pxa: fix wrong parsing gpio event on spitz ARM: OMAP2+: usb-host: fix compile warning ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback ...
2012-02-29drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()Sebastian Biemueller
The bo is removed from the list at the top of radeon_vm_bo_rmv(), but then the list is used in radeon_vm_bo_update_pte() to look up the vm. remove the bo_list entry at the end of the function instead. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29drm/radeon: fix uninitialized variableChristian König
Without this fix the driver randomly treats textures as arrays and I'm really wondering why gcc isn't complaining about it. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-2.6-samsung into HEAD * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung: drm/exynos: exynos_drm.h header file fixes drm/exynos: added panel physical size. drm/exynos: added postclose to release resource. drm/exynos: removed exynos_drm_fbdev_recreate function. drm/exynos: fixed page flip issue. drm/exynos: added possible_clones setup function. drm/exynos: removed pageflip_event_list init code when closed. drm/exynos: changed priority of mixer layers. drm/exynos: Fix typo in exynos_mixer.c
2012-02-29drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)Alex Deucher
Need to call ExternalEncoderControl to set up DDC before trying to get an EDID for all DP bridge chips (including DP to LVDS). Also remove redundant encoder assignment. V2: fix typo in commit message. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29watchdog: fix GETTIMEOUT ioctl in booke_wdtDmitry Artamonow
Commit dcfb748422 ([WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds) fixed SETTIMEOUT ioctl to use seconds as a parameter instead of some hardware-specific "period", but missed to apply similar changes to GETTIMEOUT, so it still returns "period" value. Let's fix it! Also, while at it, make SETTIMEOUT ioctl return real timeout value as it should do according to the documentation. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28hwmon: (f75375s) Make pwm*_mode writable for the F75387Nikolaus Schulz
Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-28hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387Nikolaus Schulz
For the F75387, the register holding the current PWM duty cycle value is r/o; changing it requires writing to the fan expect register instead. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Simplified function parameters] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-28Merge tag 'iommu-fixes-v3.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu IOMMU fixes for Linux 3.3-rc5 All the fixes are for the OMAP IOMMU driver. The first patch is the biggest one. It fixes the calls of the function omap_find_iovm_area() in the omap-iommu-debug module which expects a 'struct device' parameter since commit fabdbca instead of an omap_iommu handle. The omap-iommu-debug code still passed the handle to the function which caused a crash. The second patch fixes a NULL pointer dereference in the OMAP code and the third patch makes sure that the omap-iommu is initialized before the omap-isp driver, which relies on the iommu. The last patch is only a workaround until defered probing is implemented. * tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp iommu/omap: fix NULL pointer dereference iommu/omap: fix erroneous omap-iommu-debug API calls
2012-02-28watchdog: Fix typo in pnx4008_wdt.cMasanari Iida
Correct spelling "resouce" to "resource" in drivers/watchdog/pnx4008_wdt.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28watchdog: Fix typo in KconfigMasanari Iida
Correct spelling "overidden" to "overridden" in drivers/watchdog/Kconfig Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28watchdog: fix error in probe() of s3c2410_wdt (reset at booting)MyungJoo Ham
Probe function of s3c2410 watchdog calls request_irq before initializing required value (wdt_count). This incurs resetting watchdog counter value and watchdog-reboot during booting up. This patch addresses such an issue by calling request_irq later. Error handling in probe function and calling oder in remove function are also revised accordingly. Reported-by: Chanwoo Park <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28watchdog: hpwdt: clean up set_memory_x call for 32 bitMaxim Uvarov
1. address has to be page aligned. 2. set_memory_x uses page size argument, not size. Bug causes with following commit: commit da28179b4e90dda56912ee825c7eaa62fc103797 Author: Mingarelli, Thomas <Thomas.Mingarelli@hp.com> Date: Mon Nov 7 10:59:00 2011 +0100 watchdog: hpwdt: Changes to handle NX secure bit in 32bit path commit e67d668e147c3b4fec638c9e0ace04319f5ceccd upstream. This patch makes use of the set_memory_x() kernel API in order to make necessary BIOS calls to source NMIs. Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2012-02-28crypto: mv_cesa - fix final callback not ignoring input dataPhil Sutter
Broken by commit 6ef84509f3d439ed2d43ea40080643efec37f54f for users passing a request with non-zero 'nbytes' field, like e.g. testmgr. Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-02-28Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into HEAD * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: Remove use of the autoreported ringbuffer HEAD position drm/i915: Prevent a machine hang by checking crtc->active before loading lut drm/i915: fix operator precedence when enabling RC6p drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0 drm/i915: fix mode set on load pipe. (v2)
2012-02-27Merge branch 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6 into fixesArnd Bergmann
* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 Update to Linux 3.3-rc5 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27drm/i915: Remove use of the autoreported ringbuffer HEAD positionChris Wilson
This is a revert of 6aa56062eaba67adfb247cded244fd877329588d. This was originally introduced to workaround reads of the ringbuffer registers returning 0 on SandyBridge causing hangs due to ringbuffer overflow. The root cause here was reads through the GT powerwell require the forcewake dance, something we only learnt of later. Now it appears that reading the reported head position from the HWS is returning garbage, leading once again to hangs. For example, on q35 the autoreported head reports: [ 217.975608] head now 00010000, actual 00010000 [ 436.725613] head now 00200000, actual 00200000 [ 462.956033] head now 00210000, actual 00210010 [ 485.501409] head now 00400000, actual 00400020 [ 508.064280] head now 00410000, actual 00410000 [ 530.576078] head now 00600000, actual 00600020 [ 553.273489] head now 00610000, actual 00610018 which appears reasonably sane. In contrast, if we look at snb: [ 141.970680] head now 00e10000, actual 00008238 [ 141.974062] head now 02734000, actual 000083c8 [ 141.974425] head now 00e10000, actual 00008488 [ 141.980374] head now 032b5000, actual 000088b8 [ 141.980885] head now 03271000, actual 00008950 [ 142.040628] head now 02101000, actual 00008b40 [ 142.180173] head now 02734000, actual 00009050 [ 142.181090] head now 00000000, actual 00000ae0 [ 142.183737] head now 02734000, actual 00009050 In addition, the automatic reporting of the head position is scheduled to be defeatured in the future. It has no more utility, remove it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27compat: fix compile breakage on s390Heiko Carstens
The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-27[PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.hCong Wang
drivers/parisc/iommu-helpers.h:62: error: implicit declaration of function 'prefetchw' make[3]: *** [drivers/parisc/sba_iommu.o] Error 1 drivers/parisc/iommu-helpers.h needs to #include <linux/prefetch.h> where prefetchw is declared. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-27ARM: OMAP: make iommu subsys_initcall to fix builtin omap3ispOhad Ben-Cohen
omap3isp depends on omap's iommu and will fail to probe if initialized before it (which always happen if they are builtin). Make omap's iommu subsys_initcall as an interim solution until the probe deferral mechanism is merged. Reported-by: James <angweiyang@gmail.com> Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
1) ICMP sockets leave err uninitialized but we try to return it for the unsupported MSG_OOB case, reported by Dave Jones. 2) Add new Zaurus device ID entries, from Dave Jones. 3) Pointer calculation in hso driver memset is wrong, from Dan Carpenter. 4) ks8851_probe() checks unsigned value as negative, fix also from Dan Carpenter. 5) Fix crashes in atl1c driver due to TX queue handling, from Eric Dumazet. I anticipate some TX side locking fixes coming in the near future for this driver as well. 6) The inline directive fix in Bluetooth which was breaking the build only with very new versions of GCC, from Johan Hedberg. 7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge window, reported by Meelis Roos and fixed by Eric Dumazet. 8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng. 9) Some ip6_route_output() callers test the return value for NULL, but this never happens as the convention is to return a dst entry with dst->error set. Fixes from RonQing Li. 10) Logitech Harmony 900 should be handled by zaurus driver not cdc_ether, update white lists and black lists accordingly. From Scott Talbert. 11) Receiving from certain kinds of devices there won't be a MAC header, so there is no MAC header to fixup in the IPSEC code, and if we try to do it we'll crash. Fix from Eric Dumazet. 12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny Petrilin. 13) Fix regression in link-down handling in davinci_emac which causes all RX descriptors to be freed up and therefore RX to wedge completely, from Christian Riesch. 14) It took two attempts, but ctnetlink soft lockups seem to be cured now, from Pablo Neira Ayuso. 15) Endianness bug fix in ENIC driver, from Santosh Nayak. 16) The long ago conversion of the PPP fragmentation code over to abstracted SKB list handling wasn't perfect, once we get an out of sequence SKB we don't flush the rest of them like we should. From Ben McKeegan. 17) Fix regression of ->ip_summed initialization in sfc driver. From Ben Hutchings. 18) Bluetooth timeout mistakenly using msecs instead of jiffies, from Andrzej Kaczmarek. 19) Using _sync variant of work cancellation results in deadlocks, use the non _sync variants instead. From Andre Guedes. 20) Bluetooth rfcomm code had reference counting problems leading to crashes, fix from Octavian Purdila. 21) The conversion of netem over to classful qdisc handling added two bugs to netem_dequeue(), fixes from Eric Dumazet. 22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall. 23) b44_pci_exit() should not have __exit tag since it's invoked from non-__exit code. From Nikola Pajkovsky. 24) The conversion of the neighbour hash tables over to RCU added a race, fixed here by adding the necessary reread of tbl->nht, fix from Michel Machado. 25) When we added VF (virtual function) attributes for network device dumps, this potentially bloats up the size of the dump of one network device such that the dump size is too large for the buffer allocated by properly written netlink applications. In particular, if you add 255 VFs to a network device, parts of GLIBC stop working. To fix this, we add an attribute that is used to turn on these extended portions of the network device dump. Sophisticaed applications like 'ip' that want to see this stuff will be changed to set the attribute, whereas things like GLIBC that don't care about VFs simply will not, and therefore won't be busted by the mere presence of VFs on a network device. Thanks to the tireless work of Greg Rose on this fix. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) sfc: Fix assignment of ip_summed for pre-allocated skbs ppp: fix 'ppp_mp_reconstruct bad seq' errors enic: Fix endianness bug. gre: fix spelling in comments netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2) Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries" davinci_emac: Do not free all rx dma descriptors during init mlx4_core: Fixing array indexes when setting port types phy: IC+101G and PHY_HAS_INTERRUPT flag netdev/phy/icplus: Correct broken phy_init code ipsec: be careful of non existing mac headers Move Logitech Harmony 900 from cdc_ether to zaurus hso: memsetting wrong data in hso_get_count() netfilter: ip6_route_output() never returns NULL. ethernet/broadcom: ip6_route_output() never returns NULL. ipv6: ip6_route_output() never returns NULL. jme: Fix FIFO flush issue atm: clip: remove clip_tbl ipv4: ping: Fix recvmsg MSG_OOB error handling. rtnetlink: Fix problem with buffer allocation ...
2012-02-25Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Couple of minor driver fixes. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max34440) Fix resetting temperature history hwmon: (f75375s) Fix register write order when setting fans to full speed hwmon: (ads1015) Fix file leak in probe function hwmon: (max6639) Fix PPR register initialization to set both channels hwmon: (max6639) Fix FAN_FROM_REG calculation
2012-02-25[SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576Boaz Harrosh
It used to be that minors where 8 bit. But now they are actually 20 bit. So the fix is simplicity itself. I've tested with 300 devices and all user-mode utils work just fine. I have also mechanically added 10,000 to the ida (so devices are /dev/osd10000, /dev/osd10001 ...) and was able to mkfs an exofs filesystem and access osds from user-mode. All the open-osd user-mode code uses the same library to access devices through their symbolic names in /dev/osdX so I'd say it's pretty safe. (Well tested) This patch is very important because some of the systems that will be deploying the 3.2 pnfs-objects code are larger than 64 OSDs and will stop to work properly when reaching that number. CC: Stable <stable@vger.kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-24Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
2012-02-24Merge branch 'sfc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
2012-02-25sfc: Fix assignment of ip_summed for pre-allocated skbsBen Hutchings
When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 SCSI fixes on 20120224: "This is a set of assorted bug fixes for power management, mpt2sas, ipr, the rdac device handler and quite a big chunk for qla2xxx (plus a use after free of scsi_host in scsi_scan.c). " * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_dh_rdac: Fix for unbalanced reference count [SCSI] scsi_pm: Fix bug in the SCSI power management handler [SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost' [SCSI] qla2xxx: Update version number to 8.03.07.13-k. [SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx. [SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx. [SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle. [SCSI] qla2xxx: Remove check for null fcport from host reset handler. [SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. [SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing. [SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command. [SCSI] qla2xxx: Add an "is reset active" helper. [SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. [SCSI] qla2xxx: Propagate up abort failures. [SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded [SCSI] ipr: fix eeh recovery for 64-bit adapters [SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
2012-02-24ppp: fix 'ppp_mp_reconstruct bad seq' errorsBen McKeegan
This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24enic: Fix endianness bug.Santosh Nayak
Sparse complaints the endian bug. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24i2c: mxs: only flag completion when queue is completely doneWolfram Sang
The hardware generates an interrupt for every completed command in the queue while the code assumed that it will only generate one interrupt when the queue is empty. So, explicitly check if the queue is really empty. This patch fixed problems which occurred due to high traffic on the bus. While we are here, move the completion-initialization after the parameter error checking. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: stable@kernel.org
2012-02-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] hdpvr: update picture controls to support firmware versions > 0.15 [media] wl128x: fix build errors when GPIOLIB is not enabled [media] hdpvr: fix race conditon during start of streaming [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes [media] imon: don't wedge hardware after early callbacks
2012-02-24drm/i915: Prevent a machine hang by checking crtc->active before loading lutAlban Browaeys
Before loading the lut (gamma), check the active state of intel_crtc, otherwise at least on gen2 hang ensue. This is reproducible in Xorg via: xset dpms force off then xgamma -rgamma 2.0 # freeze. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44505 Signed-off-by: Alban Browaeys <prahal@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24drm/i915: fix operator precedence when enabling RC6pEugeni Dodonov
As noticed by Torsten Kaiser, the operator precedence can play tricks with us here. CC: Dave Airlie <airlied@redhat.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SuperH fixes for 3.3-rc5 * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr arch/sh: remove references to cpu_*_map. sh: Fix typo in pci-sh7780.c sh: add platform_device for SPI1 in setup-sh7757 sh: modify resource for SPI0 in setup-sh7757 sh: se7724: fix compile breakage sh: clkfwk: bugfix: use clk_reparent() for div6 clocks sh: clock-sh7724: fixup sh_fsi clock settings sh: sh7757lcr: update to the new MMCIF DMA configuration sh: fix the sh_mmcif_plat_data in board-sh7757lcr video: pvr2fb: Fix up spurious section mismatch warnings. sh: Defer to asm-generic/device.h.
2012-02-24hwmon: (max34440) Fix resetting temperature historyGuenter Roeck
Temperature history is reset by writing 0x8000 into the peak temperature register, not 0xffff. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>