summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-15net: dsa: mv88e6xxx: use the new PHY APIVivien Didelot
This commit replaces every MDIO direct or indirect access with the new generic mv88e6xxx_phy_* routines. This allows us to get rid of the mv88e6xxx_mdio_{read,write}_{,in}direct and {_,}mv88e6xxx_mdio_page_{read,write} functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: dsa: mv88e6xxx: describe PHY page and SerDesVivien Didelot
Add mv88e6xxx_phy_page_{read,write} routines and use them to access the SerDes PHY device registers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: dsa: mv88e6xxx: abstract PHY opsVivien Didelot
Old chips use a direct access to the PHY devices registers. Next chips have a PHY Polling Unit (PPU) which needs to be disabled before accessing PHY registers. Newer chips have an indirect access to the PHY devices so that disabling the PPU is not necessary. Introduce a new phy_ops structure in the chip to describe the required PHY access routines. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: dsa: mv88e6xxx: rework Global2 SMI PHY accessVivien Didelot
Describe the presence of the Global2 SMI PHY registers, used to indirectly access the internal SMI devices registers on some chips. Also temporarily forward declare mv88e6xxx_g2_smi_phy_{read,write} to use them in mv88e6xxx_mdio_{read,write}_indirect, before getting rid of the later. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: dsa: mv88e6xxx: describe Multi-chip registersVivien Didelot
Add flags to describe the presence of SMI Command and Data registers used to indirectly access internal SMI devices registers when the switch SMI address is not zero. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: dsa: mv88e6xxx: rename _mv88e6xxx_waitVivien Didelot
Now that there is no locked version of the wait routine anymore, rename the _ prefixed version and make it use the new read API. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: mediatek: remove unnecessary platform_set_drvdata()Wei Yongjun
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: thunderx: Remove unnecessary pci_set_drvdata()Wei Yongjun
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: ena: Fix error return code in ena_device_init()Wei Yongjun
Fix to return a negative error code from the invalid dma width error handling case instead of 0. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: ena: Remove unnecessary pci_set_drvdata()Wei Yongjun
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: phy: Fix return value check in xgmiitorgmii_probe()Wei Yongjun
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: hns: mdio->irq is an array, so no need to check if it is nullColin Ian King
The null check on mdio->irq is redundant since mdio->irq is an array of PHY_MAX_ADDR ints and hence can never be null. Remove the redundant check. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Add and modify some printsYuval Mintz
This patch touches various prints in the driver - it reduces the verbosity of some prints [which were previously logged by default] while adding several new debug prints and modifying others. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Trivial modificationsYuval Mintz
Change qed* code in trivial manner; This isn't necessarily semantic-only, but the end result is the same, i.e., no change should occur from user perspective. Changes include: - Using temporary variables to better fit 80-character restrictions. - Removal of unused variables & code with no effect. [plus some additional minor modifications]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Semantic changesYuval Mintz
Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15fjes: Delete owner assignmentMarkus Elfring
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15pptp: Refactor the struct and macros of PPTP codesGao Feng
1. Use struct gre_base_hdr directly in pptp_gre_header instead of duplicated members; 2. Use existing macros like GRE_KEY, GRE_SEQ, and so on instead of duplicated macros defined by PPTP; 3. Add new macros like GRE_IS_ACK/SEQ and so on instead of PPTP_GRE_IS_A/S and so on; Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: dsa: b53: remove .owner and .bus fields for driverWei Yongjun
Remove .owner and .bus fields since module_spi_driver() is used which set them automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: macb: add missing free_netdev() on error in macb_probe()Wei Yongjun
Add the missing free_netdev() before return from function macb_probe() in the platform_get_irq() error handling case. Fixes: c69618b3e4f2 ("net/macb: fix probe sequence to setup clocks earlier") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14qed: Fix possible memory leak in qed_dcbnl_get_ieee_pfc()Wei Yongjun
'dcbx_info is malloced in qed_dcbnl_get_ieee_pfc() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: a1d8d8a51e83 ("qed: Add dcbnl support.") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14cxgb4/cxgb4vf: Add set VF mac address supportHariprasad Shenai
Add ndo_set_vf_mac support which allows to set the MAC address for cxgb4vf interfaces from the host Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14cxgb4: Add control net_device for configuring PCIe VFHariprasad Shenai
Issue: For instance, the current APIs assume a 1-to-1 mapping of Network Ports, Physical Functions and the SR-IOV Virtual Functions of those Physical Functions. This is not the case with our cards where any Virtual Function can be hooked up to any Port -- or any number of Ports the current Linux APIs also assume only 1 Network Interface/Port can be accessed per Virtual Function. Another issue is that these APIs assume that the Administrative Driver is attached to the Physical Function Associated with a Virtual Function. This is not the case with our card where all administration is performed by a Driver which is not attached to any of the Physical Functions which have SR-IOV PCI Capabilities. Another consequence of these assumptions is the inability to utilize all of the cards SR-IOV resources. For instance, our cards have SR-IOV Capabilities on Physical Functions 0..3 and the administrative Driver attaches to Physical Function 4. Each of the Physical Functions 0..3 can support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port card would only be able to use the Virtual Functions on Physical Function 0..1 and not allow the Virtual Functions on Physical Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card. Fix: Since the control node is always the netdevice for all VF ACL commands. Created a dummy netdevice for each Physical Function from 0 to 3 through which one could control their VFs. The device won't be associated with any port, since it doesn't need to transmit/receive. Its purely used for VF management purpose only. The device will be registered only when VF for a particular PF is configured using PCI sysfs interface and unregistered while pci_disable_sriov() for the PF is called. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: phy: initialize rc to zero to avoid returning garbage valueColin Ian King
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED function vsc85xx_ack_interrupt is returning an uninitialized garbage value. Fix this by initializing rc to zero. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: bfin_mac: Fix a few spelling fixesLABBE Corentin
This patch respell some word badly spelled. - Invidate instead of Invalidate - proble instead of probe Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: realtek: rtlwifi: usb: don't print error when allocating urb ↵Wolfram Sang
fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: marvell: mwifiex: usb: don't print error when allocating urb ↵Wolfram Sang
fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: marvell: libertas_tf: if_usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: intersil: orinoco: orinoco_usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: broadcom: brcm80211: brcmfmac: usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: ath: ar5523: ar5523: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wimax: i2400m: usb-notif: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: usbnet: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: lan78xx: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: hso: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: usb_8dev: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: peak_usb: pcan_usb_core: don't print error when allocating ↵Wolfram Sang
urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: kvaser_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: gs_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: esd_usb2: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: ems_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: fix up a few missing hashtable.h conflict resolutionsJiri Kosina
There are a couple of leftover symbol conflicts caused by hashtable.h being included by netdevice.h; those were not caught as build failure (they're "only" a warning, but in fact real bugs). Fix those up. Fixes: e87a8f24c ("net: resolve symbol conflicts with generic hashtable.h") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Don't set RX_PACKET_DIS while initializingSunil Goutham
Setting BGXX_SPUX_MISC_CONTROL::RX_PACKET_DIS is not needed as packet reception is anyway disabled by BGXX_CMRX_CONFIG::DATA_PKT_RX_EN. Also setting RX_PACKET_DIS causes a bogus remote fault condition which delays link detection. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use netdev_rss_key_fill() helperSunil Goutham
Use standard API to generate a random RSS hash key on every boot. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Configure tunnelling protocol parsingZyta Szpak
This patch enables parsing of inner layers for tunnelled packets. Signed-off-by: Zyta Szpak <zr@semihalf.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use napi_consume_skb for bulk freeSunil Goutham
This patch enables bulk freeing on the Tx side. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Don't set mac address for secondary Qset VFsSunil Goutham
Set MAC addresses only for primary VF's and don't for secondary VFs. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Reset RXQ HW stats when interface is brought downJerin Jacob
When SQ/TXQ is reclaimed i.e reset it's stats also automatically reset by HW. This is not the case with RQ. Also VF doesn't have write access to statistics counter registers. Hence a new Mbox msg is introduced which supports resetting RQ, SQ and full Qset stats. Currently only RQ stats are being reset using this mbox message. Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Improvement for MBX interface debug messagesRadoslaw Biernacki
Adding debug messages in case of NACK for a mailbox message, also did small cleanups. Signed-off-by: Radoslaw Biernacki <rad@semihalf.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use skb_add_rx_frag() for split buffer Rx pktsSunil Goutham
Instead of a round about way of converting buffers to SKBs and combining them into a frag list, use standard skb_add_rx_frag() API to merge page fragments. This code is useful when incoming packets are of size more than RCV_FRAG_LEN which is currently set to 2048bytes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use netdev's name for naming VF's interruptsSunil Goutham
This patch changes the way VF's irqs are visible in /proc/interrupts. Instead of VF id, logical interface's netdev name is used for IRQ naming and also all secondary VF's interrupts in multiqset config use primary VF's netdev name. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 05:23:39 +0000