summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-03-17Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into driversRussell King
2011-03-10ARM: 6764/1: pl011: factor out FIFO to TTY codeLinus Walleij
This piece of code was just slightly different between the DMA and IRQ paths, in DMA mode we surely shouldn't read more than 256 character either, so factor this out in its own function and use for both DMA and PIO mode. Tested on Ux500 and U300. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-10ARM: 6763/1: pl011: add optional RX DMA to PL011 v2Linus Walleij
This adds an optional RX DMA codepath for the devices that support this by using the apropriate burst sizes instead of pulling single bytes. Includes portions of code written by Russell King during a PL08x hacking session. This has been tested on U300 and Ux500. Tested-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Tested-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Tested-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Per Forlin <per.friden@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-07Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: davinci: cpufreq: fix section mismatch warning DaVinci: fix compilation warnings in <mach/clkdev.h> davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio ARM: pxa/tosa: register wm9712 codec device ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100 ARM: 6761/1: Update number of VIC for S5PV210 ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request ARM: 6765/1: remove obsolete comment from asm/mach/arch.h ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
2011-03-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: Allow sdio operations in other threads during sdio_add_func()
2011-03-07Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: index i shadowed in 2nd loop drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously drm/nouveau: fix regression causing ttm to not be able to evict vram drm/i915: Rebind the buffer if its alignment constraints changes with tiling drm/i915: Disable GPU semaphores by default drm/i915: Do not overflow the MMADDR write FIFO Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
2011-03-08drm: index i shadowed in 2nd looproel
Index i was already used in thhe first loop Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-07mmc: sdio: Allow sdio operations in other threads during sdio_add_func()Dmitry Shmidt
This fixes a bug introduced by 807e8e40673d ("mmc: Fix sd/sdio/mmc initialization frequency retries") that prevented SDIO drivers from performing SDIO commands in their probe routines -- the above patch called mmc_claim_host() before sdio_add_func(), which causes a deadlock if an external SDIO driver calls sdio_claim_host(). Fix tested on an OLPC XO-1.75 with libertas on SDIO. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Reviewed-and-Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-08Merge remote branch 'ickle/drm-intel-fixes' into drm-fixesDave Airlie
* ickle/drm-intel-fixes: drm/i915: Rebind the buffer if its alignment constraints changes with tiling drm/i915: Disable GPU semaphores by default drm/i915: Do not overflow the MMADDR write FIFO Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
2011-03-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape: deadlock on system work queue [S390] keyboard: integer underflow bug [S390] xpram: remove __initdata attribute from module parameters
2011-03-08drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenouslyBen Skeggs
The per-vm mutex doesn't prevent this completely, a flush coming from the BAR VM could potentially happen at the same time as one for the channel VM. Not to mention that if/when we get per-client/channel VM, this will happen far more frequently. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-08drm/nouveau: fix regression causing ttm to not be able to evict vramBen Skeggs
TTM assumes an error condition from man->func->get_node() means that something went horribly wrong, and causes it to bail. The driver is supposed to return 0, and leave mm_node == NULL to signal that it couldn't allocate any memory. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-07drm/i915: Rebind the buffer if its alignment constraints changes with tilingChris Wilson
Early gen3 and gen2 chipset do not have the relaxed per-surface tiling constraints of the later chipsets, so we need to check that the GTT alignment is correct for the new tiling. If it is not, we need to rebind. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07drm/i915: Disable GPU semaphores by defaultChris Wilson
Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09 down to the use of GPU semaphores, and we already know that they appear broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling GPU semaphores is simply hiding another bug by the latency and side-effects of the additional device interaction it introduces...) However, use of semaphores is a massive performance improvement... Only as long as the system remains stable. Enable at your peril. Reported-by: Andi Kleen <andi-fd@firstfloor.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-06virtio: console: Don't access vqs if device was unpluggedAmit Shah
If a virtio-console device gets unplugged while a port is open, a subsequent close() call on the port accesses vqs to free up buffers. This can lead to a crash. The buffers are already freed up as a result of the call to unplug_ports() from virtcons_remove(). The fix is to simply not access vq information if port->portdev is NULL. Reported-by: juzhang <juzhang@redhat.com> CC: stable@kernel.org Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-06drm/i915: Do not overflow the MMADDR write FIFOChris Wilson
Whilst the GT is powered down (rc6), writes to MMADDR are placed in a FIFO by the System Agent. This is a limited resource, only 64 entries, of which 20 are reserved for Display and PCH writes, and so we must take care not to queue up too many writes. To avoid this, there is counter which we can poll to ensure there are sufficient free entries in the fifo. "Issuing a write to a full FIFO is not supported; at worst it could result in corruption or a system hang." Reported-and-Tested-by: Matt Turner <mattst88@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34056 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-06Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"Chris Wilson
This reverts commit c2e0eb167070a6e9dcb49c84c13c79a30d672431. As it turns out, userspace already depends upon being able to enable tiling on existing bo which it promises to be large enough for its purposes i.e. it will not access beyond the end of the last full-tile row. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35016 Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-04drivers/video/backlight/ltv350qv.c: fix a memory leakAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04pps: make pps_gen_parport depend on BROKENThomas Gleixner
This driver causes hard lockups, when the active clock soure is jiffies. The reason is that it loops with interrupts disabled waiting for a timestamp to be reached by polling getnstimeofday(). Though with a jiffies clocksource, when that code runs on the same CPU which is responsible for updating jiffies, then we loop in circles for ever simply because the timer interrupt cannot update jiffies. So both UP and SMP can be affected. There is no easy fix for that problem so make it depend on BROKEN for now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Rodolfo Giometti <giometti@linux.it> Cc: john stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drivers/misc/bmp085.c: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Cc: Christoph Mair <christoph.mair@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drivers/rtc/rtc-s3c.c: fix prototype for s3c_rtc_setaie()Axel Lin
Fix s3c_rtc_setaie() prototype to eliminate the following compile warning: drivers/rtc/rtc-s3c.c:383: warning: initialization from incompatible pointer type (akpm: the rtc_class_ops.alarm_irq_enable() handler is being passed two arguments where it expects just one, presumably with undesired effects) Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drm/nouveau: allocate kernel's notifier object at end of blockBen Skeggs
The nv30/nv40 3d driver is about to start using DMA_FENCE from the 3D object which, it turns out, doesn't like its DMA object to not be aligned to a 4KiB boundary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) MAINTAINERS: Add Andy Gospodarek as co-maintainer. r8169: disable ASPM RxRPC: Fix v1 keys AF_RXRPC: Handle receiving ACKALL packets cnic: Fix lost interrupt on bnx2x cnic: Prevent status block race conditions with hardware net: dcbnl: check correct ops in dcbnl_ieee_set() e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead igb: fix sparse warning e1000: fix sparse warning netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values dccp: fix oops on Reset after close ipvs: fix dst_lock locking on dest update davinci_emac: Add Carrier Link OK check in Davinci RX Handler bnx2x: update driver version to 1.62.00-6 bnx2x: properly calculate lro_mss bnx2x: perform statistics "action" before state transition. bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode). bnx2x: Fix ethtool -t link test for MF (non-pmf) devices. bnx2x: Fix nvram test for single port devices. ...
2011-03-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill loop_mutex blktrace: Remove blk_fill_rwbs_rq. block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue() block: add @force_kblockd to __blk_run_queue() block: fix kernel-doc format for blkdev_issue_zeroout blk-throttle: Do not use kblockd workqueue for throtl work
2011-03-03r8169: disable ASPMStanislaw Gruszka
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03[S390] tape: deadlock on system work queueMartin Schwidefsky
The 34xx and 3590 tape driver uses the system work queue to defer work from the interrupt function to process context, e.g. a medium sense after an unsolicited interrupt. The tape commands started by the work handler need to be asynchronous, otherwise a deadlock on the system work queue can occur. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03[S390] keyboard: integer underflow bugDan Carpenter
The "ct" variable should be an unsigned int. Both struct kbdiacrs ->kb_cnt and struct kbd_data ->accent_table_size are unsigned ints. Making it signed causes a problem in KBDIACRUC because the user could set the signed bit and cause a buffer overflow. Cc: <stable@kernel.org> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03[S390] xpram: remove __initdata attribute from module parametersMartin Schwidefsky
The module parameter 'devs' and 'sizes' are marked as __initdata. The memory for the parameters are freed after module_init completed. This can lead to kernel crashes in param_free_charp. Remove the __initdata attribute to fix the problem. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03block: kill loop_mutexPetr Uzel
Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [<c102ec04>] irq_exit+0x36/0x59 [<c101502c>] smp_apic_timer_interrupt+0x6b/0x75 [<c127f639>] apic_timer_interrupt+0x31/0x38 [<c101df88>] mutex_spin_on_owner+0x54/0x5b [<fe2250e9>] lo_release+0x12/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a4da5>] fput+0xd5/0x1aa [<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop] [<fe225110>] lo_release+0x39/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a59d9>] deactivate_locked_super+0x17/0x36 [<c10b6f37>] sys_umount+0x27e/0x2a5 [<c10b6f69>] sys_oldumount+0xb/0xe [<c1002897>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan <knikanth@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: fix memory corruption with GM965 and >4GB RAM
2011-03-02Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: of/promtree: allow DT device matching by fixing 'name' brokenness (v5) x86: OLPC: have prom_early_alloc BUG rather than return NULL of/flattree: Drop an uninteresting message to pr_debug level of: Add missing of_address.h to xilinx ehci driver
2011-03-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Avoid tps6586x burst writes mfd: Don't suspend WM8994 if the CODEC is not suspended mfd: Fix DaVinci voice codec device name mfd: Fix NULL pointer due to non-initialized ucb1x00-ts absinfo mfd: Fix ASIC3 build with GENERIC_HARDIRQS_NO_DEPRECATED
2011-03-02Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] p4-clockmod: print EST-capable warning message only once [CPUFREQ] fix BUG on cpufreq policy init failure [CPUFREQ] Fix another notifier leak in powernow-k8. [CPUFREQ] Missing "unregister_cpu_notifier" in powernow-k8.c
2011-03-02Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: disable Atom/Lincroft HW C-state auto-demotion intel_idle: disable NHM/WSM HW C-state auto-demotion
2011-03-02cnic: Fix lost interrupt on bnx2xMichael Chan
We service 2 queues (kcq1 and kcq2) in cnic_service_bnx2x_bh(). If the status block index has changed when servicing the kcq2, we must go back and check kcq1. The latest status block index will be used to acknowledge the interrupt, and without looping back to check kcq1, we may miss events on kcq1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02cnic: Prevent status block race conditions with hardwareMichael Chan
The status block index is used to acknowledge interrupt events and must be read before checking for the interrupt events, so we need to add rmb() to guarantee that. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / ACPICA: Implicit notify for multiple devices ACPI / debugfs: Fix buffer overflows, double free
2011-03-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
2011-03-02of/promtree: allow DT device matching by fixing 'name' brokenness (v5)Andres Salomon
Commit e2f2a93b, "of/promtree: add package-to-path support to pdt" changed dp->name from using the 'name' property to using package-to-path. This fixed /proc/device-tree creation by eliminating conflicts between names (the 'name' property provides names like 'battery', whereas package-to-path provides names like '/foo/bar/battery@0', which we stripped to 'battery@0'). However, it also breaks of_device_id table matching. The fix that we _really_ wanted was to keep dp->name based upon the name property ('battery'), but based dp->full_name upon package-to-path ('battery@0'). This patch does just that. This changes all users (except SPARC) of promtree to use the full result from package-to-path for full_name, rather than stripping the directory out. In practice, the strings end up being exactly the same; this change saves time, code, and memory. SPARC continues to use the existing build_path_component() code. v2: combine two patches and revert of_pdt_node_name to original version v3: use dp->phandle instead of passing around node v4: warn/bail out for non-sparc archs if pkg2path is not set v5: split of_pdt_build_full_name into sparc & non-sparc versions v6: Pass NULL to pkg2path before buf gets assigned. Drop check for pkg2path hook on each and every node. v7: Don't BUG() when unable to get the full_path; create a known-unique name instead. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-02of: Add missing of_address.h to xilinx ehci driverMichal Simek
Build log: In file included from drivers/usb/host/ehci-hcd.c:1208: drivers/usb/host/ehci-xilinx-of.c: In function 'ehci_hcd_xilinx_of_probe': drivers/usb/host/ehci-xilinx-of.c:168: error: implicit declaration of function 'of_address_to_resource' Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-02block: add @force_kblockd to __blk_run_queue()Tejun Heo
__blk_run_queue() automatically either calls q->request_fn() directly or schedules kblockd depending on whether the function is recursed. blk-flush implementation needs to be able to explicitly choose kblockd. Add @force_kblockd. All the current users are converted to specify %false for the parameter and this patch doesn't introduce any behavior change. stable: This is prerequisite for fixing ide oops caused by the new blk-flush implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup insteadBruce Allan
When support for 82577/82578 was added[1] in 2.6.31, PHY wakeup was in- advertently enabled (even though it does not function properly) on ICH10 LOMs. This patch makes it so that the ICH10 LOMs use MAC wakeup instead as was done with the initial support for those devices (i.e. 82567LM-3, 82567LF-3 and 82567V-4). [1] commit a4f58f5455ba0efda36fb33c37074922d1527a10 Reported-by: Aurelien Jarno <aurelien@aurel32.net> Cc: <stable@kernel.org> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02igb: fix sparse warningJeff Kirsher
Reported-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02e1000: fix sparse warningStephen Hemminger
Sparse complains because the e1000 driver is calling ioread on a pointer not tagged as __iomem. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02mfd: Avoid tps6586x burst writesvwadekar@nvidia.com
tps6586 does not support burst writes. i2c writes have to be 1 byte at a time. Cc: stable@kernel.org Signed-off-by: Varun Wadekar <vwadekar@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Don't suspend WM8994 if the CODEC is not suspendedMark Brown
ASoC supports keeping the audio subsysetm active over suspend in order to support use cases such as audio passthrough from a cellular modem with the main CPU suspended. Ensure that we don't power down the CODEC when this is happening by checking to see if VMID is up and skipping suspend and resume when it is. If the CODEC has suspended then it'll turn VMID off before the core suspend() gets called. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix DaVinci voice codec device nameManjunathappa, Prakash
Fix the device name in DaVinci Voice Codec MFD driver to load davinci-vcif and cq93vc codec client drivers. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix NULL pointer due to non-initialized ucb1x00-ts absinfoJochen Friedrich
Call input_set_abs_params instead of manually setting absbit only. This fixes this oops: Unable to handle kernel NULL pointer dereference at virtual address 00000024 Internal error: Oops: 41b67017 [#1] CPU: 0 Not tainted (2.6.37 #4) pc : [<c016d1fc>] lr : [<00000000>] psr: 20000093 sp : c19e5f30 ip : c19e5e6c fp : c19e5f58 r10: 00000000 r9 : c19e4000 r8 : 00000003 r7 : 000001e4 r6 : 00000001 r5 : c1854400 r4 : 00000003 r3 : 00000018 r2 : 00000018 r1 : 00000018 r0 : c185447c Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c1b6717f Table: c1b6717f DAC: 00000017 Stack: (0xc19e5f30 to 0xc19e6000) 5f20: 00000003 00000003 c1854400 00000013 5f40: 00000001 000001e4 000001c5 c19e5f80 c19e5f5c c016d5e8 c016cf5c 000001e4 5f60: c1854400 c18b5860 00000000 00000171 000001e4 c19e5fc4 c19e5f84 c01559a4 5f80: c016d584 c18b5868 00000000 c1bb5c40 c0035afc c18b5868 c18b5868 c1a55d54 5fa0: c18b5860 c0155750 00000013 00000000 00000000 00000000 c19e5ff4 c19e5fc8 5fc0: c0050174 c015575c 00000000 c18b5860 00000000 c19e5fd4 c19e5fd4 c1a55d54 5fe0: c00500f0 c003b464 00000000 c19e5ff8 c003b464 c00500fc 04000400 04000400 Backtrace: Function entered at [<c016cf50>] from [<c016d5e8>] Function entered at [<c016d578>] from [<c01559a4>] r8:000001e4 r7:00000171 r6:00000000 r5:c18b5860 r4:c1854400 Function entered at [<c0155750>] from [<c0050174>] Function entered at [<c00500f0>] from [<c003b464>] r6:c003b464 r5:c00500f0 r4:c1a55d54 Code: e59520fc e1a03286 e0433186 e0822003 (e592000c) >>PC; c016d1fc <input_handle_event+2ac/5a0> <===== Trace; c016cf50 <input_handle_event+0/5a0> Trace; c016d5e8 <input_event+70/88> Trace; c016d578 <input_event+0/88> Trace; c01559a4 <ucb1x00_thread+254/2dc> Trace; c0155750 <ucb1x00_thread+0/2dc> Trace; c0050174 <kthread+84/8c> Trace; c00500f0 <kthread+0/8c> Trace; c003b464 <do_exit+0/624> Signed-off-by: Jochen Friedrich <jochen@scram.de> CC: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix ASIC3 build with GENERIC_HARDIRQS_NO_DEPRECATEDLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-01[CPUFREQ] fix BUG on cpufreq policy init failureJiri Slaby
cpufreq_register_driver sets cpufreq_driver to a structure owned (and placed) in the caller's memory. If cpufreq policy fails in its ->init function, sysdev_driver_register returns nonzero in cpufreq_register_driver. Now, cpufreq_register_driver returns an error without setting cpufreq_driver back to NULL. Usually cpufreq policy modules are unloaded because they propagate the error to the module init function and return that. So a later access to any member of cpufreq_driver causes bugs like: BUG: unable to handle kernel paging request at ffffffffa00270a0 IP: [<ffffffff8145eca3>] cpufreq_cpu_get+0x53/0xe0 PGD 1805067 PUD 1809063 PMD 1c3f90067 PTE 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/tun0/statistics/collisions CPU 0 Modules linked in: ... Pid: 5677, comm: thunderbird-bin Tainted: G W 2.6.38-rc4-mm1_64+ #1389 To be filled by O.E.M./To Be Filled By O.E.M. RIP: 0010:[<ffffffff8145eca3>] [<ffffffff8145eca3>] cpufreq_cpu_get+0x53/0xe0 RSP: 0018:ffff8801aec37d98 EFLAGS: 00010086 RAX: 0000000000000202 RBX: 0000000000000000 RCX: 0000000000000001 RDX: ffffffffa00270a0 RSI: 0000000000001000 RDI: ffffffff8199ece8 ... Call Trace: [<ffffffff8145f490>] cpufreq_quick_get+0x10/0x30 [<ffffffff8103f12b>] show_cpuinfo+0x2ab/0x300 [<ffffffff81136292>] seq_read+0xf2/0x3f0 [<ffffffff8126c5d3>] ? __strncpy_from_user+0x33/0x60 [<ffffffff8116850d>] proc_reg_read+0x6d/0xa0 [<ffffffff81116e53>] vfs_read+0xc3/0x180 [<ffffffff81116f5c>] sys_read+0x4c/0x90 [<ffffffff81030dbb>] system_call_fastpath+0x16/0x1b ... It's all cause by weird fail path handling in cpufreq_register_driver. To fix that, shuffle the code to do proper handling with gotos. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dave Jones <davej@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 17:42:02 +0000