summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-07-11watchdog: da9052: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: cpwd: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_opsJingoo Han
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: s3c2410_wdt: use dev_err()/dev_info() instead of pr_err()/pr_info()Jingoo Han
dev_err()/dev_info() are more preferred than pr_err()/pr_info(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: wm831x: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: wm831x_wdt: use devm_gpio_request_one()Jingoo Han
Use devm_gpio_request_one() to make cleanup paths simpler. Also, GPIOF_DIR_OUT | GPIOF_INIT_LOW is replaced with GPIOF_OUT_INIT_LOW. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: mtx1-wdt: use devm_gpio_request_one()Jingoo Han
Use devm_gpio_request_one() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: sp805_wdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: shwdt: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: shwdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: pnx4008_wdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: imx2_wdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: dw_wdt: Staticize local symbolSachin Kamat
'dw_wdt_write' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11ifb: fix oops when loading the ifb faileddingtianhong
If __rtnl_link_register() return faild when loading the ifb, it will take the wrong path and get oops, so fix it just like dummy. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11dummy: fix oops when loading the dummy faileddingtianhong
We rename the dummy in modprobe.conf like this: install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy We got oops when we run the command: modprobe dummy0 modprobe dummy1 ------------[ cut here ]------------ [ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 3302.195411] IP: [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.201844] PGD 85c94a067 PUD 8517bd067 PMD 0 [ 3302.206305] Oops: 0002 [#1] SMP [ 3302.299737] task: ffff88105ccea300 ti: ffff880eba4a0000 task.ti: ffff880eba4a0000 [ 3302.307186] RIP: 0010:[<ffffffff813fe62a>] [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.316044] RSP: 0018:ffff880eba4a1dd8 EFLAGS: 00010246 [ 3302.321332] RAX: 0000000000000000 RBX: ffffffff81a9d738 RCX: 0000000000000002 [ 3302.328436] RDX: 0000000000000000 RSI: ffffffffa04d602c RDI: ffff880eba4a1dd8 [ 3302.335541] RBP: ffff880eba4a1e18 R08: dead000000200200 R09: dead000000100100 [ 3302.342644] R10: 0000000000000080 R11: 0000000000000003 R12: ffffffff81a9d788 [ 3302.349748] R13: ffffffffa04d7020 R14: ffffffff81a9d670 R15: ffff880eba4a1dd8 [ 3302.364910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3302.370630] CR2: 0000000000000008 CR3: 000000085e15e000 CR4: 00000000000427e0 [ 3302.377734] DR0: 0000000000000003 DR1: 00000000000000b0 DR2: 0000000000000001 [ 3302.384838] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3302.391940] Stack: [ 3302.393944] ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0 [ 3302.401350] 00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8 [ 3302.408758] ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0 [ 3302.416164] Call Trace: [ 3302.418605] [<ffffffffa01a8000>] ? 0xffffffffa01a7fff [ 3302.423727] [<ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0] [ 3302.430405] [<ffffffffa01a8000>] ? 0xffffffffa01a7fff [ 3302.435535] [<ffffffff81000322>] do_one_initcall+0x152/0x1b0 [ 3302.441263] [<ffffffff810ab24b>] do_init_module+0x7b/0x200 [ 3302.446824] [<ffffffff810ad3d2>] load_module+0x4e2/0x530 [ 3302.452215] [<ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60 [ 3302.458979] [<ffffffff810ad5f1>] SyS_init_module+0xd1/0x130 [ 3302.464627] [<ffffffff814b9652>] system_call_fastpath+0x16/0x1b [ 3302.490090] RIP [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.496607] RSP <ffff880eba4a1dd8> [ 3302.500084] CR2: 0000000000000008 [ 3302.503466] ---[ end trace 8342d49cd49f78ed ]--- The reason is that when loading dummy, if __rtnl_link_register() return failed, the init_module should return and avoid take the wrong path. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11watchdog: dw_wdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: ts72xx_wdt: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: riowd: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: riowd: use devm_kzalloc()Jingoo Han
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: rc32434_wdt: use devm_ioremap_nocache() functionsJingoo Han
Use devm_ioremap_nocache() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: nuc900_wdt: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: mv64x60_wdt: use devm_ioremap()Jingoo Han
Use devm_ioremap() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11drivers: net: phy: at803x: Add missing mdio device idHelmut Schaa
at803x supports Atheros 8030, 8031 and 8035 PHYs. 8031 was missing from the mdio device id table. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11watchdog: bcm63xx_wdt: use devm_ioremap_nocache()Jingoo Han
Use devm_ioremap_nocache() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: at32ap700x: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: at32ap700x_wdt: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11bnx2x: fix tunneling CSUM calculationDmitry Kravkov
Since commit c957d09ffda417f6c8e3d1f10e2b05228607d6d7 "bnx2x: Remove sparse and coccinelle warnings" driver provided wrong partial csum for HW in tunneing scenarios. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Pravin Shelar <pshelar@nicira.com> CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11alx: fix lockdep annotationMaarten Lankhorst
Move spin_lock_init to be called before the spinlocks are used, preventing a lockdep splat. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11vxlan: Fix kernel crash on rmmod.Pravin B Shelar
vxlan exit module unregisters vxlan net and then it unregisters rtnl ops which triggers vxlan_dellink() from __rtnl_kill_links(). vxlan_dellink() deletes vxlan-dev from vxlan_list which has list-head in vxlan-net-struct but that is already gone due to net-unregister. That is how we are getting following crash. Following commit fixes the crash by fixing module exit path. BUG: unable to handle kernel paging request at ffff8804102c8000 IP: [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 PGD 2972067 PUD 83e019067 PMD 83df97067 PTE 80000004102c8060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: --- CPU: 19 PID: 6712 Comm: rmmod Tainted: GF 3.10.0+ #95 Hardware name: Dell Inc. PowerEdge R620/0KCKR5, BIOS 1.4.8 10/25/2012 task: ffff88080c47c580 ti: ffff88080ac50000 task.ti: ffff88080ac50000 RIP: 0010:[<ffffffff812cc5e9>] [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 RSP: 0018:ffff88080ac51e08 EFLAGS: 00010206 RAX: ffff8804102c8000 RBX: ffff88040f0d4b10 RCX: dead000000200200 RDX: ffff8804102c8000 RSI: ffff88080ac51e58 RDI: ffff88040f0d4b10 RBP: ffff88080ac51e08 R08: 0000000000000001 R09: 2222222222222222 R10: 2222222222222222 R11: 2222222222222222 R12: ffff88080ac51e58 R13: ffffffffa07b8840 R14: ffffffff81ae48c0 R15: ffff88080ac51e58 FS: 00007f9ef105c700(0000) GS:ffff88082a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8804102c8000 CR3: 00000008227e5000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88080ac51e28 ffffffff812cc6a1 2222222222222222 ffff88040f0d4000 ffff88080ac51e48 ffffffffa07b3311 ffff88040f0d4000 ffffffff81ae49c8 ffff88080ac51e98 ffffffff81492fc2 ffff88080ac51e58 ffff88080ac51e58 Call Trace: [<ffffffff812cc6a1>] list_del+0x11/0x40 [<ffffffffa07b3311>] vxlan_dellink+0x51/0x70 [vxlan] [<ffffffff81492fc2>] __rtnl_link_unregister+0xa2/0xb0 [<ffffffff8149448e>] rtnl_link_unregister+0x1e/0x30 [<ffffffffa07b7b7c>] vxlan_cleanup_module+0x1c/0x2f [vxlan] [<ffffffff810c9b31>] SyS_delete_module+0x1d1/0x2c0 [<ffffffff812b8a0e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81582f42>] system_call_fastpath+0x16/0x1b Code: eb 9f 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 RIP [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 RSP <ffff88080ac51e08> CR2: ffff8804102c8000 Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10sh_eth: SH_ETH should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `sh_eth_free_dma_buffer': drivers/net/ethernet/renesas/sh_eth.c:1103: undefined reference to `dma_free_coherent' drivers/net/ethernet/renesas/sh_eth.c:1110: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_init': drivers/net/ethernet/renesas/sh_eth.c:1065: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/renesas/sh_eth.c:1086: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_format': drivers/net/ethernet/renesas/sh_eth.c:988: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_txfree': drivers/net/ethernet/renesas/sh_eth.c:1220: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sh_eth_rx': drivers/net/ethernet/renesas/sh_eth.c:1323: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_start_xmit': drivers/net/ethernet/renesas/sh_eth.c:1954: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10macvtap: correctly linearize skb when zerocopy is usedJason Wang
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to linearize parts of the skb to let the rest of iov to be fit in the frags, we need count copylen into linear when calling macvtap_alloc_skb() instead of partly counting it into data_len. Since this breaks zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should be zero at beginning. This cause nr_frags to be increased wrongly without setting the correct frags. This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10tuntap: correctly linearize skb when zerocopy is usedJason Wang
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to linearize parts of the skb to let the rest of iov to be fit in the frags, we need count copylen into linear when calling tun_alloc_skb() instead of partly counting it into data_len. Since this breaks zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should be zero at beginning. This cause nr_frags to be increased wrongly without setting the correct frags. This bug were introduced from 0690899b4d4501b3505be069b9a687e68ccbe15b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10ifb: fix rcu_sched self-detected stallsdingtianhong
According to the commit 16b0dc29c1af9df341428f4c49ada4f626258082 (dummy: fix rcu_sched self-detected stalls) Eric Dumazet fix the problem in dummy, but the ifb will occur the same problem like the dummy modules. Trying to "modprobe ifb numifbs=30000" triggers : INFO: rcu_sched self-detected stall on CPU After this splat, RTNL is locked and reboot is needed. We must call cond_resched() to avoid this, even holding RTNL. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull Sparc bugfixes from David Miller: "Four bug fixes: 1) Enable snoop tags properly on Sparc32/LEON, from Andreas Larsson 2) strcpy() length check fix from Chen Gang. 3) Forgotten unregister_netdev() in sunvnet driver, from Dave Kleikamp. 4) Fix broken assembler offsets used in vm_area_struct accesses on sparc32, from Olivier DANET." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: [PATCH] sparc32: vm_area_struct access for old Sun SPARCs. sunvnet: vnet_port_remove must call unregister_netdev sparc32, leon: Require separate snoop tags set to regard snooping to be enabled arch: sparc: kernel: check the memory length before use strcpy().
2013-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE updates from David Miller: "Just a few small things: 1) module_platform_driver_probe() conversions from Jingoo Han. 2) module_pci_driver() conversion from Libo Chen. 3) PIO size calculation fix from Steven J Hill" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Fix IDE PIO size calculation drivers/ide/delkin_cb: Convert to module_pci_driver ide: gayle: use module_platform_driver_probe() ide: tx4939ide: use module_platform_driver_probe() ide: tx4938ide: use module_platform_driver_probe()
2013-07-10r8169: add a new chip for RTL8411hayeswang
Add a new chip for RTL8411 series. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10net: rename ll methods to busy-pollEliezer Tamir
Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10net: rename include/net/ll_poll.h to include/net/busy_poll.hEliezer Tamir
Rename the file and correct all the places where it is included. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10dm: add switch targetJim Ramsay
dm-switch is a new target that maps IO to underlying block devices efficiently when there is a large number of fixed-sized address regions but there is no simple pattern to allow for a compact mapping representation such as dm-stripe. Though we have developed this target for a specific storage device, Dell EqualLogic, we have made an effort to keep it as general purpose as possible in the hope that others may benefit. Originally developed by Jim Ramsay. Simplified by Mikulas Patocka. Signed-off-by: Jim Ramsay <jim_ramsay@dell.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm: optimize reorder structureMikulas Patocka
This reorder actually improves performance by 20% (from 39.1s to 32.8s) on x86-64 quad core Opteron. I have no explanation for this, possibly it makes some other entries are better cache-aligned. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm: optimize use SRCU and RCUMikulas Patocka
This patch removes "io_lock" and "map_lock" in struct mapped_device and "holders" in struct dm_table and replaces these mechanisms with sleepable-rcu. Previously, the code would call "dm_get_live_table" and "dm_table_put" to get and release table. Now, the code is changed to call "dm_get_live_table" and "dm_put_live_table". dm_get_live_table locks sleepable-rcu and dm_put_live_table unlocks it. dm_get_live_table_fast/dm_put_live_table_fast can be used instead of dm_get_live_table/dm_put_live_table. These *_fast functions use non-sleepable RCU, so the caller must not block between them. If the code changes active or inactive dm table, it must call dm_sync_table before destroying the old table. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm bufio: submit writes outside lockMikulas Patocka
This patch changes dm-bufio so that it submits write I/Os outside of the lock. If the number of submitted buffers is greater than the number of requests on the target queue, submit_bio blocks. We want to block outside of the lock to improve latency of other threads that may need the lock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm cache: fix arm link errors with inlineMikulas Patocka
Use __always_inline to avoid a link failure with gcc 4.6 on ARM. gcc 4.7 is OK. It creates a function block_div.part.8, it references __udivdi3 and __umoddi3 and it is never called. The references to __udivdi3 and __umoddi3 cause a link failure. Reported-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm verity: use __ffs and __flsMikulas Patocka
This patch changes ffs() to __ffs() and fls() to __fls() which don't add one to the result. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm flakey: correct ctr alloc failure mesgAlasdair G Kergon
Remove the reference to the "linear" target from the error message issued when allocation fails in the flakey target. Cc: Robin Dong <sanbai@taobao.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm verity: remove pointless comparisonMikulas Patocka
Remove num < 0 test in verity_ctr because num is unsigned. (Found by Coverity.) Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm: use __GFP_HIGHMEM in __vmallocMikulas Patocka
Use __GFP_HIGHMEM in __vmalloc. Pages allocated with __vmalloc can be allocated in high memory that is not directly mapped to kernel space, so use __GFP_HIGHMEM just like vmalloc does. This patch reduces memory pressure slightly because pages can be allocated in the high zone. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm verity: fix inability to use a few specific devices sizesMikulas Patocka
Fix a boundary condition that caused failure for certain device sizes. The problem is reported at http://code.google.com/p/cryptsetup/issues/detail?id=160 For certain device sizes the number of hashes at a specific level was calculated incorrectly. It happens for example for a device with data and metadata block size 4096 that has 16385 blocks and algorithm sha256. The user can test if he is affected by this bug by running the "veritysetup verify" command and also by activating the dm-verity kernel driver and reading the whole block device. If it passes without an error, then the user is not affected. The condition for the bug is: Split the total number of data blocks (data_block_bits) into bit strings, each string has hash_per_block_bits bits. hash_per_block_bits is rounddown(log2(metadata_block_size/hash_digest_size)). Equivalently, you can say that you convert data_blocks_bits to 2^hash_per_block_bits base. If there some zero bit string below the most significant bit string and at least one bit below this zero bit string is set, then the bug happens. The same bug exists in the userspace veritysetup tool, so you must use fixed veritysetup too if you want to use devices that are affected by this boundary condition. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # 3.4+ Cc: Milan Broz <gmazyland@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm ioctl: set noio flag to avoid __vmalloc deadlockMikulas Patocka
Set noio flag while calling __vmalloc() because it doesn't fully respect gfp flags to avoid a possible deadlock (see commit 502624bdad3dba45dfaacaf36b7d83e39e74b2d2). This should be backported to stable kernels 3.8 and newer. The kernel 3.8 doesn't have memalloc_noio_save(), so we should set and restore process flag PF_MEMALLOC instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10dm mpath: fix ioctl deadlock when no pathsHannes Reinecke
When multipath needs to retry an ioctl the reference to the current live table needs to be dropped. Otherwise a deadlock occurs when all paths are down: - dm_blk_ioctl takes a reference to the current table and spins in multipath_ioctl(). - A new table is being loaded, but upon resume the process hangs in dm_table_destroy() waiting for references to drop to zero. With this patch the reference to the old table is dropped prior to retry, thereby avoiding the deadlock. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 21:00:44 +0000