summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-06-28[POWERPC] PS3: Frame buffer system-bus reworkGeert Uytterhoeven
Convert the ps3fb device from a platform device to a PS3 system bus device. Fix the remove and shutdown methods to support kexec and to make ps3fb a loadable module. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28[POWERPC] PS3: Rework AV settings driverGeoff Levand
Make the PS3 ps3av driver a loadable module. - Replace static data with kmalloc()'ed. o Allocate struct ps3av dynamically, as it contains data used as vuart receive/transmit buffers o Move static recv_buf from ps3av_do_pkt() to struct ps3av - Move ps3av_vuart_{read,write}() from drivers/ps3/ps3av_cmd.c to drivers/ps3/ps3av.c and make them static as they're used in that file only. - Make device a PS3 system-bus device. - Update copyright formatting. - Make two new routines ps3av_register_flip_ctl() and ps3av_flip_ctl() to support late binding of the frame buffer flip control routine. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28[POWERPC] PS3: System manager re-workGeoff Levand
PS3 sys-manager updates to reflect the new PS3 unifed device support. Fixups to the PS3 sys-manager driver to properly support sys_reboot(). - Add varable request_tag to struct ps3_sys_manager_header. - Move ctrl_alt_del from PS3_SM_EVENT_POWER_RELEASED to PS3_SM_EVENT_POWER_PRESSED. - Make the PS3 sys-manager driver a loadable module. - Add new file sys-manager-core.c. - Add new struct ps3_sys_manager_ops for dynamic binding. - Put data sent to device on stack. - Add support for PS3_SM_SERVICE_ID_REQUEST_ERROR. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28[POWERPC] PS3: Vuart reworkGeoff Levand
PS3 vuart updates to reflect the new PS3 unified device support. - Move vuart devices to the PS3 system bus. - Replace use of ps3_vuart_port_device with ps3_system_bus_device. - Make the PS3 vuart bus driver a loadable module. - Add remove() and shutdown() routines. - Move ps3_vuart_work into ps3_vuart_port_priv.tx_list. - Remove redundant spinlock ps3_vuart_work.lock. - No longer free ps3_vuart_port_device.priv on shutdown. - Cleanup Kconfig defs. - Export symbols needed for modular port drivers. - Arrange to use port numbers found in repository. - Fix bugs in ps3_vuart_read_async() and polled reading - Cleanup handling of shared interrupt with ps3_vuart_bus_interrupt_get() and ps3_vuart_bus_interrupt_put() - Add more comments to vuart.c. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28[POWERPC] PS3: Add support for HDMI RGB Full Range modeMasashi Kimoto
Add support for HDMI RGB Full Range mode, which is available on system software 1.80 or newer. CC: Masashi Kimoto <Masashi_Kimoto@hq.scei.sony.co.jp> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28[POWERPC] PS3: Use __maybe_unusedGeoff Levand
Change the PS3 debug routines from using the GCC specific '__attribute__ ((unused))' to the preprocessor macro __maybe_unused. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: move input-polldev to drivers/input Input: i8042 - add ULI EV4873 to noloop list Input: i8042 - add ASUS P65UP5 to the noloop list Input: usbtouchscreen - fix fallout caused by move from drivers/usb
2007-06-13mmc: get back read-only switch functionPierre Ossman
Somehow the code to read the read-only switch of SD cards got lost in the reorganisation. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13mmc-omap: fix sd response type 6 vs. 1Ragner Magalhaes
Ignoring OMAP_MMC_STAT_CARD_ERR, treating it as if the command completed correctly. Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13Input: move input-polldev to drivers/inputDmitry Torokhov
To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Merge branch 'master' into upstream-fixesJeff Garzik
2007-06-12Merge branch 'libertas-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-06-12Merge branch 'libertas' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-06-12myri10ge: update driver versionBrice Goglin
Update myri10ge driver version to 1.3.1-1.248. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12myri10ge: report when the link partner is running in Myrinet modeBrice Goglin
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet, add a message when we detect that the link partner is not running in the right mode. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12myri10ge: limit the number of recoveriesBrice Goglin
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12NetXen: Fix link status messagesMithlesh Thukral
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"Jeff Garzik
This reverts commit d52df4a35af569071fda3f4eb08e47cc7023f094. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12[PATCH] libertas: convert libertas_mpp into anycast_maskLuis Carlos
With firmware 5.220.11.p5, this allows to specify the anycast addresses the device will listen to. The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or 0 to 31 in dec). The value to write on anycast_mask will specify which addresses the device listens to. Bits in a 32 bit int are numbered from 0 (least significative bit) to 31. A specific address ending in YY will be listened to if bit YY in the value is set to one. Examples: 0x00000000 : do not listen to any anycast address 0xFFFFFFFF : listen to every anycast address from :00 to :1F 0x00000013 : listen to anycast addresses :00, :01 and :04 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: actually send mesh frames to mesh netdevDan Williams
Found by Luis; got broken during module split. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: deauthenticate from AP in channel switchLuis Carlos Cobo Rus
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: pull current channel from firmware on mesh autostartLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12Input: i8042 - add ULI EV4873 to noloop listDmitry Torokhov
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ASUS P65UP5 to the noloop listDmitry Torokhov
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Make sure RQ allocation is always valid RDMA/cma: Fix initialization of next_port IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp() mlx4_core: Don't set MTT address in dMPT entries with PA set mlx4_core: Check firmware command interface revision IB/mthca, mlx4_core: Fix typo in comment mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id mlx4_core: Initialize ctx_list and ctx_lock earlier mlx4_core: Fix CQ context layout
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: Add support for G33, Q33 and Q35 chipsets [AGPGART] intel_agp: add support for 945GME [AGPGART] intel_agp: add support for 965GME/GLE [AGPGART] intel_agp: use table for device probe [AGPGART] intel_agp: cleanup intel private data
2007-06-11Merge branch 'linus-plus-plus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: limit post SRST nsect/lbal wait to ~100ms libata: force PIO on IOMEGA ZIP 250 ATAPI libata passthru: update cached device paramters libata passthru: always enforce correct DEV bit libata passthru: map UDMA protocols libata passthru: support PIO multi commands libata passthru: update protocol numbers libata: Correct abuse of language libata-core/sff: Fix multiple assumptions about DMA ahci: Add MCP73/MCP77 support to AHCI driver libata: fix hw_sata_spd_limit initialization libata: print device model and firmware revision for ATAPI devices libata: fix probe time irq printouts libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP remove unused variable in pata_isapnp
2007-06-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5751): Ivtv: fix ia64 printk format warnings. V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode. V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output. V4L/DVB (5730): Remove unused V4L2_CAP_VIDEO_OUTPUT_POS V4L/DVB (5720): Usbvision: fix urb allocation and submits V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values V4L/DVB (5675): Move big PIO accesses from the interrupt handler to a workhandler V4L/DVB (5699): Cinergyt2: fix file release handler V4L/DVB (5700): Saa7111: fix picture settings cache bug V4L/DVB (5702): Fix Kconfig items to avoid linkedition errors
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: Add the MCP73/77 support to PATA driver Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. hpt366: disallow Ultra133 for HPT374 ide: generic IDE PCI driver, add another device exception ide: HPA detect from resume it821x: RAID mode fixes serverworks: fix CSB6 tuning logic serverworks: remove crappy code
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: don't call switch on old cards mmc: fix broken if clause au1xmmc: Replace C code with call to ARRAY_SIZE() macro. mmc-atmel: remove linux/mmc/protocol.h dependencies
2007-06-11[PATCH] libertas: reduce SSID and BSSID mixed-case abuseDan Williams
Kill mixed case function names from scan.c/scan.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove WPA_SUPPLICANT structureDan Williams
Unused. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essidDan Williams
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: tweak association debug outputDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix big-endian associate command.David Woodhouse
Byte-swapping length fields and then passing them to memcpy() considered harmful. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: don't byte-swap firmware version number. It's a byte array.David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: more endianness fixes, in tx.c this timeDavid Woodhouse
Now we finally get connectivity. For a while, before something else dies... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: More endianness fixes.David Woodhouse
Now it at least manages to load the firmware. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: first pass at fixing up endianness issuesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: sparse fixesDan Williams
Fix various issues reported by sparse. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix character set in READMEDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: support for mesh autostart on firmware 5.220.11Luis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: split wext for eth and mshLuis Carlos Cobo Rus
Separate wireless handlers of mshX and ethX. ethX remains as before. For mshX, it has been disabled set/get essid, wap and set mode. Get mode always returns "Repeater" and by now we use the Nickname to show if the mesh is active ("Mesh") or not (empty). The rest remains as before. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make mac address configuration work with mesh interface tooLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: updated readme fileLuis Carlos Cobo Rus
Fix some wording and blinding table command options, clarify argument list for fwt_add and fwt_list, simplify fwt_list_route Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: Make WPA work through supplicant handshakeDan Williams
Fix WPA so it works up through the supplicant 4-Way handshake process. Doesn't successfully pass traffic yet; may be problems installing the GTK to the firmware. - RSN needs to be enabled before the association command is sent - Use keys from the association request not the adapter structure - cmd_act_mac_strict_protection_enable != IW_AUTH_DROP_UNENCRYPTED - Fix network filtering logic in is_network_compatible() WPA helpers Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: add more verbose debugging to libertas_cmd_80211_authenticateDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: debug print spacing fixes in assoc.cDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-07 22:21:05 +0000