summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-08-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-08-14net: remove netdev_bonding_change()Amerigo Wang
I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: move and rename netif_notify_peers()Amerigo Wang
I believe net/core/dev.c is a better place for netif_notify_peers(), because other net event notify functions also stay in this file. And rename it to netdev_notify_peers(). Cc: David S. Miller <davem@davemloft.net> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-13p54: fix powerpc gcc warningsChristian Lamparter
My commit "p54: parse output power table" introduced the following compiler warnings for powerpc-allmodconfig eeprom.c: In function 'p54_get_maxpower': eeprom.c:291 warning: comparison of distinct pointer types lacks a cast eeporm.c:292 warning: comparison of distinct pointer types lacks a cast eeprom.c:293 warning: comparison of distinct pointer types lacks a cast eeprom.c:294 warning: comparison of distinct pointer types lacks a cast This patch fixes those by using max_t(u16 which forces a type cast. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10brcmsmac: document firmware dependenciesJeff Mahoney
The brcmsmac driver requests firmware but doesn't document the dependency. This means that software that analyzes the modules to determine if firmware is needed won't detect it. Specifically, (at least) openSUSE won't install the kernel-firmware package if no hardware requires it. This patch adds the MODULE_FIRMWARE directives. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: tune rc_stats to display only valid ratesRajkumar Manoharan
This could make rc_stats more simpler and ease the debugging. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Trim rate tableSujith Manoharan
Remove ctrl_rate, cw40index, sgi_index, ht_index and calculate the rate index for TX status from the valid_rate_index that is populated at initialization time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove MIMO-PS specific codeSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup TX status APISujith Manoharan
Calculate the final rate index inside ath_rc_tx_status(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Bail out properly before calculating rate indexSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Fix RTS/CTS rate selectionSujith Manoharan
The current method of assigning the RTS/CTS rate is completely broken for HT mode and breaks P2P operation. Fix this by using the basic_rates provided to the driver by mac80211. For now, choose the lowest supported basic rate for HT frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Do not set IEEE80211_TX_RC_USE_SHORT_PREAMBLESujith Manoharan
mac80211 does it for us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Unify valid rate calculation routinesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove ath_rc_set_valid_rate_idxSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Change rateset calculationSujith Manoharan
Commit "ath9k: Change rate control to use legacy rate as last MRR" resulted in the mixing of HT/legacy rates in a single rateset, which is undesirable. Revert this behavior. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup index retrieval routinesSujith Manoharan
Trim API and remove unused variables. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_htratesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_ratesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup RC init APISujith Manoharan
A reference to the rate table is stored inside the private structure, so there is no need to pass "rate_table" around. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Simplify rate table initializationSujith Manoharan
Remove various local variables that duplicate information already stored in mac80211. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: use GFP_ATOMIC under spin lockDan Carpenter
We're holding the sta_list_spinlock here so we can't sleep. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: notify cfg80211 about MIC failuresAmitkumar Karwar
Call cfg80211_michael_mic_failure() handler when there is a MIC error event from firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix 'smatch' warning in preparing key_material cmdBing Zhao
The key length can be 32 bytes for TKIP and 16 bytes for AES_CMAC. 'smatch' warns on memcpy using key_len variable to copy data to a 16 bytes buffer. Use fixed length to avoid the warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ssb: check for flash presentenceRafał Miłecki
We can not assume parallel flash is always present, there are boards with *serial* flash and probably some without flash at all. Define some bits by the way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10b43legacy: fix logic in GPIO initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10b43: N-PHY: fix 0x2057 radio calib copy/paste mistakeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix powerpc64-linux- compilation warningsBing Zhao
These warnings can be detected by using powerpc64-linux toolchain (gcc-4.6.3-nolibc). CC [M] drivers/net/wireless/mwifiex/sta_event.o drivers/net/wireless/mwifiex/sta_event.c: In function 'mwifiex_process_sta_event': drivers/net/wireless/mwifiex/sta_event.c:388:4: warning: comparison of distinct pointer types lacks a cast [enabled by default] CC [M] drivers/net/wireless/mwifiex/uap_event.o drivers/net/wireless/mwifiex/uap_event.c: In function 'mwifiex_process_uap_event': drivers/net/wireless/mwifiex/uap_event.c:258:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] Use min_t() instead of min() to fix the warnings. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10iwlegacy: clean up suspend/resumeJohannes Berg
There's no need to export the il_pci_suspend and il_pci_resume functions since they're only referenced from il_pm_ops. The latter can also be defined using SIMPLE_DEV_PM_OPS instead of open-coding it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix code mis-alignment after the if statementFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Put power_level where it belongs and rename itNick Kossifidis
Put power_level to ah_txpower struct with the rest tx power infos and also rename it to txp_requested to make more sense. v2 make sure we don't memset it to zero on reset Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Preserve tx power level requested from above on phy_initNick Kossifidis
By using cur_pwr on phy_init we re-use the power level previously set by the driver, not the one we got from above. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Fix range scaling when setting rate power tableNick Kossifidis
rates[i] is unsigned but txp_offset can be negative for newer parts with PDADC table. We cover the case when rates[i] + txp_offset > 63 but we must also cover the case when its < 0 or else rates[i] will overflow. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Use correct value for min_pwr and cur_pwrNick Kossifidis
Make sure we don't store the table offsets for min and cur power levels, store the 0.25dB values instead. This way we don't clamp the tx power level to max (because now cur_pwr holds the 0.25dB value, not the table offset) after re-using cur_pwr on reset. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10bcma: make some functions staticHauke Mehrtens
The functions and structs are not used in an other file and the prototypes are in no header file, just make them static so the compiler is able to optimize them better. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10p54: parse output power tableChristian Lamparter
For the upcoming tpc changes, the driver needs to provide sensible max output values for each supported channel. And while the eeprom always had a output_limit table, which defines the upper limit for each frequency and modulation, it was never really useful for anything... until now. Note: For anyone wondering about what your card is calibrated for: check "iw list". * 2412 MHz [1] (18.0 dBm) * 2437 MHz [6] (19.0 dBm) [...] * 5180 MHz [36] (18.0 dBm) * 5260 MHz [52] (17.0 dBm) (radar detection) * 5680 MHz [136] (19.0 dBm) (radar detection) (for a Dell Wireless 1450 USB Adapter) Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-08-09hyperv: Add comments for the extended buffer after RNDIS messageHaiyang Zhang
Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09net: Loopback ifindex is constant nowPavel Emelyanov
As pointed out, there are places, that access net->loopback_dev->ifindex and after ifindex generation is made per-net this value becomes constant equals 1. So go ahead and introduce the LOOPBACK_IFINDEX constant and use it where appropriate. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09veth: Allow to create peer link with given ifindexPavel Emelyanov
The ifinfomsg is in there (thanks kaber@ for foreseeing this long time ago), so take the given ifidex and register netdev with it. Ben noticed, that this code path previously ignored ifmp->ifi_index and userland could be passing in garbage. Thus it may now fail occasionally because the value clashes with an existing interface. To address this it's assumed that if the caller specifies the ifindex for the veth master device, then it's aware of this possibility and should explicitly specify (or set to 0 for auto-assignment) the peer's ifindex as well. With this the compatibility with old tools not setting ifindex is preserved. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07drivers: net: ethernet: davince_mdio: device tree implementationMugunthan V N
device tree implementation for davinci mdio driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06mwifiex: add AES_CMAC support in key_material cmdYing Luo
The sequence counter will be sent to firmware via key_material command. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: pass key_params pointer in mwifiex_set_encodeYing Luo
'cipher' and 'seq' coming from cfg80211 add_key handler will be parsed in mwifiex_set_encode() to handle AES_CMAC cipher suite. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: rename wapi_rxpn to pnYing Luo
This array was used for wapi_rxpn only. Now it will be used for AES_CMAC as well. So make a generic name for it. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: cleanup TX/RX BA tables for uAPAvinash Patil
Cleanup TX/RX BA tables when AP receives deauthentication from associated station. During BSS_IDLE event, all wmm queues, BA streams created for AP interface are deleted. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: add 11n Block Ack support for uAPAvinash Patil
This patch adds support for handling BA request and BA setup events for AP interface. RA list is marked as either 11n enabled or disabled from station's capabilities in association request. BA setup is initiated only after some specific number of packets for particular RA list are transmitted. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: support RX AMSDU aggregation for uAPAvinash Patil
This patch adds support for reception and decoding of AMSDU aggregation frames for AP interface. Patch also adds support for handling AMSDU aggregation event. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: improve uAP RX handlingAvinash Patil
1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: create list for associated stations in AP modeAvinash Patil
After station is associated an entry would be added to station list. This entry would have station specific information such as 11n support, AMSDU size. The entry would be deleted after deauthentication. All station entries would be deleted during BSS_IDLE event. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: separate file for handling AP eventsAvinash Patil
Route AP events handling to separate function defined in uap_event.c. AP specific event handling is removed from sta_event.c. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: update 11n status as per start_ap IEAvinash Patil
If HT IE is present in beacon_data of start_ap cfg80211 handler, enable 11n flag in AP. Disable 11n flag when stop_ap handler is called. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-22 19:15:38 +0000