summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-17Merge branch 'ioat' into dmaengineDan Williams
2010-05-17DMAENGINE: extend the control command to include an argLinus Walleij
This adds an argument to the DMAengine control function, so that we can later provide control commands that need some external data passed in through an argument akin to the ioctl() operation prototype. [dan.j.williams@intel.com: fix up some missed conversions] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17async_tx: trim dma_async_tx_descriptor in 'no channel switch' caseDan Williams
Saves 24 bytes per descriptor (64-bit) when the channel-switching capabilities of async_tx are not required. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17DMAENGINE: DMA40 fix for allocation of logical channel 0Marcin Mielczarczyk
Fix for allocation failure of logical channel when event line happens to be number 0. Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17DMAENGINE: DMA40 support paused channel statusJonas Aaberg
Support determining whether a channel is paused or not using the status function. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17dmaengine: mpc512x: Use resource_sizeTobias Klauser
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17DMA ENGINE: Do not reset 'private' of channelJassi Brar
The member 'private' of 'struct dma_chan' is meant for passing data between client and the controller driver. The DMA client driver may point it to platform specific stuff after acquiring the channel. So, it is the responsiblity of the same code to reset it, if it must. The DMA engine doesn't set it and hence, shouldn't reset it either. This reseting of private by DMA Engine comes in the way of implementing default channel settings during DMAC probe. That capability is useful for not having the clients to always provide platform specific data, like Rx/Tx FIFO addresses, which usually doesn't change across channel requests. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-02ioat: Remove duplicated devm_kzalloc() calls for ioatdma_deviceMinskey Guo
The memory for ioatdma_device structure is being allocated in alloc_ioatdma() Signed-off-by: Minskey Guo <chaohong_guo@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01ioat3: disable cacheline-unaligned transfers for raid operationsDan Williams
There are cases where cacheline-unaligned raid operations can hang the dma channel. Simply disable these operations by increasing the alignment constraints published to async_tx. The raid456 driver always issues page aligned requests, so the only in-kernel user of the ioatdma driver that is affected by this change is dmatest. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01ioat2,3: convert to producer/consumer lockingDan Williams
Use separate locks for the descriptor prep (producer) and descriptor cleanup (consumer) paths. Allows the producer path to run concurrently with the cleanup path. Inspired by Documentation/circular-buffer.txt. Cc: David Howells <dhowells@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01ioat: convert to circ_bufDan Williams
Use the common power-of-2 circular buffer macros. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-14DMAENGINE: Support for ST-Ericssons DMA40 block v3Linus Walleij
This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-12MIPS: Fix SSB PCIcore IO resource managementAndreas Ferber
The SSB PCIcore code reused the IO resource fixup code from the original 2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack for doing PCI IO resource configuration back then (the boot loader doesn't configure PCI devices on this platform). However, this code is no longer necessary since the kernel now can do PCI resource management fine all by itself, so remove the old code. When removing the code, it becomes obvious that the mem_offset setting in the PCIcore driver was wrong, however this was masked by the fixup code before, except in a few cases involving yenta_socket. For BCM47xx, the correct offset is 0, and since this is the only device using PCIcore in host mode, the offset can simply be removed unconditionally. Signed-off-by: Andreas Ferber <af@chaos-agency.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Markus Wigge <markus@cultcom.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check correct variable for allocation failure RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp() RDMA/cm: Set num_paths when manually assigning path records IB/cm: Fix device_create() return value check
2010-04-09Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] nss: add missing .previous statement to asm function [S390] increase default size of vmalloc area [S390] s390: disable change bit override [S390] fix io_return critical section cleanup [S390] sclp_async: potential buffer overflow [S390] arch/s390/kernel: Add missing unlock
2010-04-09Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
2010-04-09Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
2010-04-09Revert "memory-hotplug: add 0x prefix to HEX block_size_bytes"Linus Torvalds
This reverts commit ba168fc37dea145deeb8fa9e7e71c748d2e00d74. It changes user-visible sysfs interfaces, and breaks some existing user space applications which apparently rely on the fact that the output does not contain the "0x" prefix. Requested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-09Merge branches 'cma', 'misc', 'mlx4' and 'nes' into for-linusRoland Dreier
2010-04-09[S390] sclp_async: potential buffer overflowDan Carpenter
"len" hasn't been properly range checked so we shouldn't use it as an array offset. This can only be written to by root but it would still be annoying to accidentally write more than 3 characters and corrupt your memory. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linusDave Airlie
* 'nouveau/for-airlied' of ../drm-nouveau-next: (21 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
2010-04-09drm/nouveau: bail out of auxch transaction if we repeatedly recieve defersBen Skeggs
There's one known case where we never stop recieving DEFER, and loop here forever. Lets not do that.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: implement gpio set/get routinesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: parse/use some more de-magiced parts of gpio table entriesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nouveau: store raw gpio table entry in bios gpio structsBen Skeggs
And use our own version of the GPIO table for the INIT_GPIO opcode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv40: Init some tiling-related PGRAPH state.Francisco Jerez
Fixes garbled 3D on an nv46 card. Reported-by: Francesco Marella <francesco.marella@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.Marcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: another dodgy DP hackBen Skeggs
Allows *some* DP cards to keep working in some corner cases that most people shouldn't hit. I hit it all the time with development, so this can stay for now. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: punt hotplug irq handling out to workqueueBen Skeggs
On DP outputs we'll likely end up running vbios init tables here, which may sleep. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: preserve an unknown SOR_MODECTRL value for DP encodersBen Skeggs
This value interacts with some registers we don't currently know how to program properly ourselves. The default of 5 that we were using matches what the VBIOS on early DP cards do, but later ones use 6, which would cause nouveau to program an incorrect mode on these chips. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: Allow using the NVA3 new compute class.Marcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: cleanup properly if PDISPLAY init failsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nouveau: fixup the init failure paths some moreBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB markBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv40: add LVDS table quirk for Dell Latitude D620Ben Skeggs
Should fix: https://bugzilla.redhat.com/show_bug.cgi?id=505132 https://bugzilla.redhat.com/show_bug.cgi?id=543091 https://bugzilla.redhat.com/show_bug.cgi?id=530425 https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/ +bug/539730 Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv40: rework lvds table parsingBen Skeggs
All indications seem to be that the version 0x30 table should be handled the same way as 0x40 (as used on G80), at least for the parts that we currently try use. This commit cleans up the parsing to make it clearer about what we're actually trying to achieve, and unifies the 0x30/0x40 parsing. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nouveau: detect vram amount once, and save the valueBen Skeggs
As opposed to repeatedly reading the amount back from the GPU every time we need to know the VRAM size. We should now fail to load gracefully on detecting no VRAM, rather than something potentially messy happening. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nouveau: remove some unused members from drm_nouveau_privateBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nouveau: Make use of TTM busy_placements.Francisco Jerez
Previously we were filling it the same as "placements", but in some cases there're valid alternatives that we were ignoring completely. Keeping a back-up memory type helps on several low-mem situations. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: add more 0x100c80 flushy magicBen Skeggs
Fixes the !vbo_fifo path in the 3D driver on certain chipsets. Still not really any good idea of what exactly the magic achieves, but it makes things work. While we're at it, in the PCIEGART path, flush on unbinding also. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: fix fbcon when framebuffer above 4GiB markBen Skeggs
This can't actually happen right now, but lets fix it anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-09drm/nv50: Fix NEWCTX_DONE flag numberMarcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-04-08loop: Update mtime when writing using aopsNikanth Karthikesan
Update mtime when writing to backing filesystem using the address space operations write_begin and write_end. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
2010-04-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Move ACPI video resume to a PM notifier ACPI: Reduce ACPI resource conflict message to KERN_WARNING, printk cleanup ACPI: battery drivers should call power_supply_changed() ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=n PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 ACPI: Don't send KEY_UNKNOWN for random video notifications ACPI: NUMA: map pxms to low node ids ACPI: use _HID when supplied by root-level devices ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe() ACPI: fixes a false alarm from lockdep ACPI dock: support multiple ACPI dock devices ACPI: EC: Allow multibyte access to EC
2010-04-08hvc_console: Fix race between hvc_close and hvc_removeAnton Blanchard
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-04-08virtio: disable multiport console support.Michael S. Tsirkin
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-04-08virtio: console makes incorrect assumption about virtio APIRusty Russell
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Amit Shah <amit.shah@redhat.com>
2010-04-08virtio: console: Fix early_put_chars usageFrançois Diakhaté
Currently early_put_chars is not used by virtio_console because it can only be used once a port has been found, at which point it's too late because it is no longer needed. This patch should fix it. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-04-07IB/mlx4: Check correct variable for allocation failureDan Carpenter
The intent here is to check the "mfrpl->mapped_page_list" allocation. We checked "mfrpl->ibfrpl.page_list" earlier. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-22 07:50:33 +0000