summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-01-19pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLENiklas Söderlund
commit 5d7400c4acbf7fe633a976a89ee845f7333de3e4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19bus: vexpress-config: fix device reference leakJohan Hovold
commit c090959b9dd8c87703e275079aa4b4a824ba3f8e upstream. Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac835b ("mfd: vexpress: Convert custom func API to regmap") Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19power: supply: bq27xxx_battery: Fix register map for BQ27510 and BQ27520Andrew F. Davis
commit 3bee9ea1de687925d116670f036599cbed8b66b0 upstream. The BQ27510 and BQ27520 use a slightly different register map than the BQ27500, add a new type enum and add these gauges to it. Fixes: d74534c27775 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices") Based-on-patch-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19bq24190_charger: Fix PM runtime use for bq24190_battery_set_propertyTony Lindgren
commit 075eb5719d53e8bb4a406ad87e1de99319aa50f0 upstream. There's a typo, it should do pm_runtime_get_sync, not put. Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Cc: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19iw_cxgb4: Fix error return code in c4iw_rdev_open()Wei Yongjun
commit 15f7e3c21b76598bc6e5816d2577ce843b2b963f upstream. Fix to return error code -ENOMEM from the __get_free_page() error handling case instead of 0, as done elsewhere in this function. Fixes: 05eb23893c2c ("cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19powercap/intel_rapl: fix and tidy up error handlingJacob Pan
commit cb43f81b8489dcb87555e16c17453f0a9fa690f2 upstream. Commit e1399ba20eee ("powercap / RAPL: handle missing MSRs") added contraint_to_pl() function to return index into an array. But it can potentially return -EINVAL if powercap layer sends an out of range constraint ID. This patch adds sanity check. Unnecessary RAPL domain pointer check is removed since it must be initialized before calling rapl_unit_xlate(). Fixes: e1399ba20eee ("powercap / RAPL: handle missing MSRs") Reported-by: Odzioba, Lukasz <lukasz.odzioba@intel.com> Reported-by: Koss, Marcin <marcin.koss@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / APEI: Fix NMI notification handlingPrarit Bhargava
commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / CPPC: set an error code on probe error pathDan Carpenter
commit 501634759d55a5b56967de6d9465acf02bbc3565 upstream. We should return -EINVAL (instead of 0) if get_cpu_device() fails. Fixes: 158c998ea44b (ACPI / CPPC: add sysfs support to compute delivered performance) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmapCharles Keepax
commit 85b037442e3f0e84296ab1010fd6b057eee18496 upstream. The handling of bypass_val_on that was added in regulator_get_bypass_regmap is done unconditionally however several drivers don't define a value for bypass_val_on. This results in those drivers reporting bypass being enabled when it is not. In regulator_set_bypass_regmap we use bypass_mask if bypass_val_on is zero. This patch adds similar handling in regulator_get_bypass_regmap. Fixes: commit dd1a571daee7 ("regulator: helpers: Ensure bypass register field matches ON value") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19cpufreq: powernv: Disable preemption while checking CPU throttling stateDenis Kirjanov
commit 8a10c06a20ec8097a68fd7a4a1c0e285095b4d2f upstream. With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d16209 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19remoteproc: st: Fix error return code in st_rproc_probe()Wei Yongjun
commit 1d701d3dd8caf6660ff33c3c23a115b4649c5cdb upstream. Fix to return a negative error code from the st_rproc_state() error handling case instead of 0, as done elsewhere in this function. Fixes: 63edb0310a5c ("remoteproc: Supply controller driver for ST's Remote Processors") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19remoteproc: qcom_wcnss: Fix circular module dependencyBjorn Andersson
commit 6de1a507c46bf22ed97043495b9ab96e4d5c213b upstream. The tie between the main WCNSS driver and the IRIS driver causes a circular dependency between the two modules. Neither part makes sense to have on their own so lets merge them into one module. For the sake of picking up the clock and regulator resources described in the iris of_node we need an associated struct device. But, to keep the size of the patch down we continue to represent the IRIS part as its own platform_driver, within the same module, rather than setting up a dummy device. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm: Initialise drm_mm.head_node.allocatedChris Wilson
commit cc98e6ce6abe1c0103cbd7aff1ee586622a9361e upstream. commit 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree") introduced a requirement that the special drm_mm.head_node was initialised and marked as not being allocated. It is a very special node that has no side but has a hole that represents the drm_mm address space, and holds the list of nodes. Since it is not a real node, it is not part of the node rbtree and we detect this as it being unallocated. This presumed that drm_mm_init() was initialising it to zero. It happens that i915 kzallocs its objects and so it was accidentally setting it, but for generic use we cannot make that assumption. [ 22.981519] general protection fault: 0000 [#1] SMP [ 22.981521] Modules linked in: test_drm_mm(+) ctr ccm arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cmac rfcomm bnep snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel dcdbas snd_hda_codec x86_pkg_temp_thermal intel_powerclamp btusb snd_hda_core coretemp crct10dif_pclmul cfg80211 btrtl btbcm btintel bluetooth crc32_pclmul ghash_clmulni_intel aesni_intel snd_pcm i2c_hid aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_timer hid_multitouch snd joydev serio_raw lpc_ich mfd_core i2c_designware_platform i2c_designware_core 8250_dw binfmt_misc soundcore acpi_pad nls_iso8859_1 usbhid hid psmouse ahci libahci [last unloaded: test_drm_mm] [ 22.981544] CPU: 1 PID: 2088 Comm: drm_mm Tainted: G W 4.9.0-rc7+ #234 [ 22.981545] Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A07 11/11/2015 [ 22.981546] task: ffff88020c971cc0 task.stack: ffffc90001728000 [ 22.981547] RIP: 0010:[<ffffffff814050f0>] [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981551] RSP: 0018:ffffc9000172ba98 EFLAGS: 00010202 [ 22.981552] RAX: 0f0000c69cf63d80 RBX: ffff88020be00000 RCX: ffff88020be00000 [ 22.981553] RDX: 0000000000000fff RSI: ffffc9000172bc48 RDI: ffffffff810ac4df [ 22.981553] RBP: ffffc9000172bb08 R08: ffffc9000172bc70 R09: 0000000000000fff [ 22.981554] R10: ffffffff810ac4d7 R11: 4dc04d8b4cffffe5 R12: 0000000000001000 [ 22.981555] R13: ffffc9000172bbd0 R14: ffffc9000172bbe0 R15: 0000000002000000 [ 22.981556] FS: 00007f80c9fab740(0000) GS:ffff88021f480000(0000) knlGS:0000000000000000 [ 22.981557] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.981558] CR2: 00007f80c9fd5000 CR3: 000000020c191000 CR4: 00000000003406e0 [ 22.981559] Stack: [ 22.981560] ffffffff81405d09 ffff88020be00000 ffffc9000172bbe0 000000000172bb08 [ 22.981562] ffffffffffffffff 0000000000000000 0000000000000000 0000000000000000 [ 22.981563] 0000000002000000 0000000002000000 ffffffffa02f3000 ffff88020be00000 [ 22.981565] Call Trace: [ 22.981568] [<ffffffff81405d09>] ? drm_mm_insert_node_generic+0x229/0x310 [ 22.981570] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981572] [<ffffffffa02903c1>] __subtest_insert_range.constprop.7+0xd1/0x5b0 [test_drm_mm] [ 22.981575] [<ffffffff81081222>] ? default_wake_function+0x12/0x20 [ 22.981576] [<ffffffff81096905>] ? __wake_up_common+0x55/0x90 [ 22.981578] [<ffffffff81085f42>] ? sched_clock_cpu+0x72/0xa0 [ 22.981581] [<ffffffff811308ad>] ? irq_work_queue+0xd/0x80 [ 22.981582] [<ffffffff810abcc4>] ? wake_up_klogd+0x34/0x40 [ 22.981584] [<ffffffff810ac19d>] ? console_unlock+0x4cd/0x530 [ 22.981585] [<ffffffff810ac4d7>] ? vprintk_emit+0x2d7/0x490 [ 22.981587] [<ffffffff810ac82f>] ? vprintk_default+0x1f/0x30 [ 22.981589] [<ffffffff81146e1c>] ? printk+0x4d/0x4f [ 22.981590] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981592] [<ffffffffa02908b5>] subtest_insert_range+0x15/0x80 [test_drm_mm] [ 22.981594] [<ffffffffa02f3088>] test_drm_mm_init+0x88/0x1000 [test_drm_mm] [ 22.981597] [<ffffffff8100043d>] do_one_initcall+0x3d/0x150 [ 22.981600] [<ffffffff8119dfbf>] ? kfree+0x13f/0x180 [ 22.981602] [<ffffffff811471f2>] do_init_module+0x60/0x1f1 [ 22.981606] [<ffffffff810db878>] load_module+0x2228/0x2790 [ 22.981608] [<ffffffff810d8590>] ? __symbol_put+0x40/0x40 [ 22.981612] [<ffffffff811c52b1>] ? kernel_read+0x41/0x60 [ 22.981614] [<ffffffff810dbfb6>] SYSC_finit_module+0x96/0xd0 [ 22.981617] [<ffffffff810dc00e>] SyS_finit_module+0xe/0x10 [ 22.981620] [<ffffffff816e7aa4>] entry_SYSCALL_64_fastpath+0x17/0x98 [ 22.981622] Code: c7 41 30 00 00 00 00 48 89 e5 48 89 3a 48 c7 c2 20 4e 40 81 e8 b2 a1 f0 ff 5d c3 48 8d 56 78 45 31 d2 48 89 d6 eb 25 48 8b 51 58 <48> 39 50 38 73 04 48 89 50 38 4c 8b 58 28 4c 39 59 48 48 8d 50 [ 22.981651] RIP [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981655] RSP <ffffc9000172ba98> Testcase: igt/drm_mm Fixes: 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161130205126.31106-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/i915: Move the min_pixclk[] handling to the end of readoutVille Syrjälä
commit 00b2b7288299a8c73c0c37b531a075ba5c849e67 upstream. Trying to determine the pixel rate of the pipe can't be done until we know the clock, which means it can't be done until the encoder .get_config() hooks have been called. So let's move the min_pixclk[] stuff to the end of intel_modeset_readout_hw_state() when we actually have gathered all the required infromation. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 565602d7501a ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161220153902.15621-1-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit aca1ebf491518910df156f3dab6a66306bb52e28) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/panel: simple: Check against num_timings when setting preferred for timingChen-Yu Tsai
commit 230c5b44233ff0543c0b5ccf4ff9400057010fbe upstream. In the loop on .timings, we should check .num_timings to see if it's the only mode specified, not .num_modes, which should be used with .modes. Fixes: cda553725c92 ("drm/panel: simple: Set appropriate mode type") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm: avoid uninitialized timestamp use in wait_vblankArnd Bergmann
commit cff52e5fc4cfc978b7df898dc14a0492c7ef0ae8 upstream. gcc warns about the timestamp in drm_wait_vblank being possibly used without an initialization: drivers/gpu/drm/drm_irq.c: In function 'drm_crtc_send_vblank_event': drivers/gpu/drm/drm_irq.c:992:24: error: 'now.tv_usec' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/drm_irq.c:1069:17: note: 'now.tv_usec' was declared here drivers/gpu/drm/drm_irq.c:991:23: error: 'now.tv_sec' may be used uninitialized in this function [-Werror=maybe-uninitialized] This can happen if drm_vblank_count_and_time() returns 0 in its error path. To sanitize the error case, I'm changing that function to return a zero timestamp when it fails. Fixes: e6ae8687a87b ("drm: idiot-proof vblank") Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161017221355.1861551-6-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/i915/gen9: Fix PCODE polling during SAGV disablingImre Deak
commit dccf82ad1775f2b9c36ec85e25e39d88c7e86818 upstream. According to the previous patch, it's possible atm that we call intel_do_sagv_disable() only once during the 1ms period and time out if that call fails. As opposed to this the spec says that we need to keep retrying this request for a 1ms duration, so let's do this similarly to the CDCLK change notification request. v4-5: - Rebased on the reply_mask, reply change. v6: - Remove w/s change. (Lyude) - Rebased on the timeout_base argument change. Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 656d1b89e5ff ("drm/i915/skl: Add support for the SAGV, fix underrun hangs") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com (cherry picked from commit b3b8e99984a4eace91bc097e8f8cec71441cae16) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19i2c: mux: pca954x: fix i2c mux selection cachingRussell King
commit 7f638c1cb0a1112dbe0b682a42db30521646686b upstream. smbus functions return -ve on error, 0 on success. However, __i2c_transfer() have a different return signature - -ve on error, or number of buffers transferred (which may be zero or greater.) The upshot of this is that the sense of the test is reversed when using the mux on a bus supporting the master_xfer method: we cache the value and never retry if we fail to transfer any buffers, but if we succeed, we clear the cached value. Fix this by making pca954x_reg_write() return a negative error code for all failure cases. Fixes: 463e8f845cbf ("i2c: mux: pca954x: retry updating the mux selection on failure") Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19pinctrl: meson: fix gpio request disabling other modesNeil Armstrong
commit f24d311f92b516a8aadef5056424ccabb4068e7b upstream. The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time tooGuilherme G. Piccoli
commit b5a10c5f7532b7473776da87e67f8301bbc32693 upstream. Commit 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness") introduced a quirk to adapters that cannot read the bit NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters need a delay or else the action of reading the bit NVME_CSTS_RDY could somehow corrupt adapter's registers state and it never recovers. When this quirk was added, we checked ctrl->tagset in order to avoid quirking in probe time, supposing we would never require such delay during probe. Well, it was too optimistic; we in fact need this quirk at probe time in some cases, like after a kexec. In some experiments, after abnormal shutdown of machine (aka power cord unplug), we booted into our bootloader in Power, which is a Linux kernel, and kexec'ed into another distro. If this kexec is too quick, we end up reaching the probe of NVMe adapter in that distro when adapter is in bad state (not fully initialized on our bootloader). What happens next is that nvme_wait_ready() is unable to complete, except if the quirk is enabled. So, this patch removes the original ctrl->tagset verification in order to enable the quirk even on probe time. Fixes: 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness") Reported-by: Andrew Byrne <byrneadw@ie.ibm.com> Reported-by: Jaime A. H. Gomez <jahgomez@mx1.ibm.com> Reported-by: Zachary D. Myers <zdmyers@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Jeffrey Lien <Jeff.Lien@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19i2c: piix4: Avoid race conditions with IMCRicardo Ribalda Delgado
commit 701dc207bf551d9fe6defa36e84a911e880398c3 upstream. On AMD's SB800 and upwards, the SMBus is shared with the Integrated Micro Controller (IMC). The platform provides a hardware semaphore to avoid race conditions among them. (Check page 288 of the SB800-Series Southbridges Register Reference Guide http://support.amd.com/TechDocs/45482.pdf) Without this patch, many access to the SMBus end with an invalid transaction or even with the bus stalled. Reported-by: Alexandre Desnoyers <alex@qtec.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>: Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19net/mlx5: Only cancel recovery work when cleaning up deviceDaniel Jurgens
commit 5e44fca5047054f1762813751626b5245e0da022 upstream. Do not attempt to drain the health workqueue when unloading the device in the recovery flow, this can cause a deadlock when the recovery work tries to cancel itself with sync. Because the work is no longer unconditionally canceled when unloading, it must be explicitly canceled in the AER flow. fixes: 689a248df83b ("net/mlx5: Cancel recovery work in remove flow") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix modem-control and B0 handlingJohan Hovold
commit 030ee7ae52a46a2be52ccc8242c4a330aba8d38e upstream. The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/amdgpu: drop verde dpm quirksAlex Deucher
commit 7192c54a68013f6058b1bb505645fcd07015191c upstream. Port of radeon change to amdgpu. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/amdgpu: update si kicker smc firmwareFlora Cui
commit 5165484b02f2cbedb5bf3a41ff5e8ae16069016c upstream. Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/radeon: drop verde dpm quirksAlex Deucher
commit 8a08403bcb39f5d0e733bcf59a8a74f16b538f6e upstream. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981 Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Adrian Fiergolski <A.Fiergolski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/radeon: update smc firmware selection for SIAlex Deucher
commit 6458bd4dfd9414cba5804eb9907fe2a824278c34 upstream. Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm: Clean up planes in atomic commit helper failure pathLaurent Pinchart
commit aebe55c2d4b998741c0847ace1b4af47d73c763b upstream. If waiting for fences fails for blocking commits, planes must be cleaned up before returning. Fixes: f6ce410a59a4 ("drm/fence: allow fence waiting to be interrupted by userspace") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170102231427.7192-1-laurent.pinchart@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/i915/gen9: Fix PCODE polling timeout in stable backportImre Deak
The backport of 2c7d0602c - "Fix PCODE polling during CDCLK change notification" to the 4.9 stable tree used an incorrect timeout value. Fix this up so the backport matches the upstream commit. Reported-by: Thomas Backlund <tmb@mageia.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19Clearing FIFOs in RS485 emulation mode causes subsequent transmits to breakDaniel Jedrychowski
commit 2bed8a8e70729f996af92042d3ad0f11870acc1f upstream. When in RS485 emulation mode, __do_stop_tx_rs485() calls serial8250_clear_fifos(). This not only clears the FIFOs, but also sets all bits in their control register (UART_FCR) to 0. One of the effects of this is the disabling of the FIFOs, which turns them into single-byte holding registers. The rest of the driver doesn't know this, which results in the lions share of characters passed into a write call to be dropped. (I can supply logic analyzer screenshots if necessary) This fix replaces the serial8250_clear_fifos() call to serial8250_clear_and_reinit_fifos() - this prevents the "dropped characters" issue from manifesting again while retaining the requirement of clearing the RX FIFO after transmission if the SER_RS485_RX_DURING_TX flag is disabled. Signed-off-by: Daniel Jedrychowski <avistel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19extcon: return error code on failurePan Bian
commit 5b11ebedd6a8bb4271b796e498cd15c0fe1133b6 upstream. Function get_zeroed_page() returns a NULL pointer if there is no enough memory. In function extcon_sync(), it returns 0 if the call to get_zeroed_page() fails. The return value 0 indicates success in the context, which is incosistent with the execution status. This patch fixes the bug by returning -ENOMEM. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611 Signed-off-by: Pan Bian <bianpan2016@163.com> Fixes: a580982f0836e Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sysrq: attach sysrq handler correctly for 32-bit kernelAkinobu Mita
commit 802c03881f29844af0252b6e22be5d2f65f93fd0 upstream. The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19orinoco: Use shash instead of ahash for MIC calculationsAndrew Lutomirski
commit 570b90fa230b8021f51a67fab2245fe8df6fe37d upstream. Eric Biggers pointed out that the orinoco driver pointed scatterlists at the stack. Fix it by switching from ahash to shash. The result should be simpler, faster, and more correct. kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I accidentally applied this patch to wireless-drivers-next when I was supposed to apply this wireless-drivers Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ibmvscsis: Fix srp_transfer_data fail return codeBryant G. Ly
commit 7c9d8d0c41b3e24473ac7648a7fc2d644ccf08ff upstream. If srp_transfer_data fails within ibmvscsis_write_pending, then the most likely scenario is that the client timed out the op and removed the TCE mapping. Thus it will loop forever retrying the op that is pretty much guaranteed to fail forever. A better return code would be EIO instead of EAGAIN. Reported-by: Steven Royer <seroyer@linux.vnet.ibm.com> Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by: Bryant G. Ly <bgly@us.ibm.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_txRichard Genoud
commit 89d8232411a85b9a6b12fd5da4d07d8a138a8e0c upstream. If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is doneRichard Genoud
commit b389f173aaa1204d6dc1f299082a162eb0491545 upstream. When using RS485 in half duplex, RX should be enabled when TX is finished, and stopped when TX starts. Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA was used. So, collisions could happened. But disabling RX in atmel_start_tx() uncovered another bug: RX was enabled again in the wrong place (in atmel_tx_dma) instead of being enabled when TX is finished (in atmel_complete_tx_dma), so the transmission simply stopped. This bug was not triggered before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was never disabled before. Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem. Reported-by: Gil Weber <webergil@gmail.com> Fixes: 0058f0871efe7b01c6 Tested-by: Gil Weber <webergil@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19virtio_blk: avoid DMA to stack for the sense bufferChristoph Hellwig
commit a14d749fcebe97ddf6af6db3d1f6ece85c9ddcb9 upstream. Most users of BLOCK_PC requests allocate the sense buffer on the stack, so to avoid DMA to the stack copy them to a field in the heap allocated virtblk_req structure. Without that any attempt at SCSI passthrough I/O, including the SG_IO ioctl from userspace will crash the kernel. Note that this includes running tools like hdparm even when the host does not have SCSI passthrough enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19dmaengine: omap-dma: Fix dynamic lch_map allocationPeter Ujfalusi
commit 836c3ce2566fb8c1754f8d7c9534cad9bc8a6879 upstream. The original patch did not done what it was supposed to be doing and even worst it broke legacy boot (OMAP1). The lch_map size should be the number of available logical channels in sDMA and the od->dma_requests should store the number of available DMA request lines usable in sDMA. In legacy mode we do not have a way to get the DMA request count, in that case we use OMAP_SDMA_REQUESTS (127), despite the fact that OMAP1510 have only 31 DMA request line. Fixes: 2d1a9a946fae ("dmaengine: omap-dma: Dynamically allocate memory for lch_map") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drivers: char: mem: Fix thinkos in kmem address checksRobin Murphy
commit 488debb9971bc7d0edd6d8080ba78ca02a04f6c4 upstream. When borrowing the pfn_valid() check from mmap_kmem(), somebody managed to get physical and virtual addresses spectacularly muddled up, such that we've ended up with checks for one being the other. Whilst this does indeed prevent out-of-bounds accesses crashing, on most systems it also prevents the more desirable use-case of working at all ever. Check the *virtual* offset correctly for what it is. Furthermore, do so in the right place - a read or write may span multiple pages, so a single up-front check is insufficient. High memory accesses already have a similar validity check just before the copy_to_user() call, so just make the low memory path fully consistent with that. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 148a1bc84398 ("drivers: char: mem: Check {read,write}_kmem() addresses") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19vme: Fix wrong pointer utilization in ca91cx42_slave_getAugusto Mecking Caringi
commit c8a6a09c1c617402cc9254b2bc8da359a0347d75 upstream. In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-By: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19Revert "tty: serial: 8250: add CON_CONSDEV to flags"Herbert Xu
commit 6741f551a0b26479de2532ffa43a366747e6dbf3 upstream. This commit needs to be reverted because it prevents people from using the serial console as a secondary console with input being directed to tty0. IOW, if you boot with console=ttyS0 console=tty0 then all kernels prior to this commit will produce output on both ttyS0 and tty0 but input will only be taken from tty0. With this patch the serial console will always be the primary console instead of tty0, potentially preventing people from getting into their machines in emergency situations. Fixes: d03516df8375 ("tty: serial: 8250: add CON_CONSDEV to flags") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19xhci: fix deadlock at host remove by running watchdog correctlyMathias Nyman
commit d6169d04097fd9ddf811e63eae4e5cd71e6666e2 upstream. If a URB is killed while the host is removed we can end up in a situation where the hub thread takes the roothub device lock, and waits for the URB to be given back by xhci-hcd, blocking the host remove code. xhci-hcd tries to stop the endpoint and give back the urb, but can't as the host is removed from PCI bus at the same time, preventing the normal way of giving back urb. Instead we need to rely on the stop command timeout function to give back the urb. This xhci_stop_endpoint_command_watchdog() timeout function used a XHCI_STATE_DYING flag to indicate if the timeout function is already running, but later this flag has been taking into use in other places to mark that xhci is dying. Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still checking that reading from pci state does not return 0xffffffff or that host is not halted before trying to stop the endpoint. This whole area of stopping endpoints, giving back URBs, and the wathdog timeout need rework, this fix focuses on solving a specific deadlock issue that we can then send to stable before any major rework. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19i2c: fix kernel memory disclosure in dev interfaceVlad Tsyrklevich
commit 30f939feaeee23e21391cfc7b484f012eb189c3c upstream. i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19i2c: print correct device invalid addressJohn Garry
commit 6f724fb3039522486fce2e32e4c0fbe238a6ab02 upstream. In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19Input: elants_i2c - avoid divide by 0 errors on bad touchscreen dataGuenter Roeck
commit 1c3415a06b1016a596bfe59e0cfee56c773aa958 upstream. The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>] [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40 [ 2189.435123] [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222 [ 2189.435135] [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a [ 2189.435145] [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [<ffffffffbe87c385>] kthread+0x10e/0x116 [ 2189.435178] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0 [ 2189.435199] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP <ffff88017a2bfd98> [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix open and resume after B0Johan Hovold
commit a20047f36e2f6a1eea4f1fd261aaa55882369868 upstream. The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix control-message error handlingJohan Hovold
commit 2d5a9c72d0c4ac73cf97f4b7814ed6c44b1e49ae upstream. A short control transfer would currently fail to be detected, something which could lead to stale buffer data being used as valid input. Check for short transfers, and make sure to log any transfer errors. Note that this also avoids leaking heap data to user space (TIOCMGET) and the remote device (break control). Fixes: 6ce76104781a ("USB: Driver for CH341 USB-serial adaptor") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix open error handlingJohan Hovold
commit f2950b78547ffb8475297ada6b92bc2d774d5461 upstream. Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix resume after resetJohan Hovold
commit ce5e292828117d1b71cbd3edf9e9137cf31acd30 upstream. Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19USB: serial: ch341: fix initial modem-control stateJohan Hovold
commit 4e2da44691cffbfffb1535f478d19bc2dca3e62b upstream. DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-09 19:20:26 +0000