summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-12-21USB: option: Removing one bogus and adding some new Huawei combinationsBjørn Mork
commit 02a551c9755b799579e0a093bcc99b80b4dc1453 upstream. Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21usb: option: Add Huawei E398 controlling interfacesAlex Hermann
commit 414b591fd16655871e9f5592a55368b10a3ccc30 upstream. This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann <alex@wenlex.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.Krzysztof Hałasa
commit 6abff5dc4d5a2c90e597137ce8987e7fd439259b upstream. Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21ibft: Fix finding IBFT ACPI table on UEFIYinghai Lu
commit 935a9fee51c945b8942be2d7b4bae069167b4886 upstream. Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21staging: r8712u: Add new USB IDLarry Finger
commit c7caf4d4c56aee40b995f5858ccf1c814f3d2da2 upstream. Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber <post@rolandgruber.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21md/raid5: fix bug that could result in reads from a failed device.NeilBrown
commit 355840e7a7e56bb2834fd3b0da64da5465f8aeaa upstream. commit a847627709b3402163d99f7c6fda4a77bcd6b51b in linux-3.0.9 attempted to backport this to 3.0 but only made one change were two were necessary. This add the second change. This bug was introduced in 415e72d034c50520ddb7ff79e7d1792c1306f0c9 which was in 2.6.36. There is a small window of time between when a device fails and when it is removed from the array. During this time we might still read from it, but we won't write to it - so it is possible that we could read stale data. We didn't need the test of 'Faulty' before because the test on In_sync is sufficient. Since we started allowing reads from the early part of non-In_sync devices we need a test on Faulty too. This is suitable for any kernel from 2.6.36 onwards, though the patch might need a bit of tweaking in 3.0 and earlier. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21hwmon: (coretemp) Fix oops on CPU offliningJean Delvare
This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. This is the same fix as "hwmon: (coretemp) Fix oops on driver load" but for the CPU offlining case. Sorry for missing it at first. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21mmc: mxcmmc: fix falling back to PIOSascha Hauer
commit e58f516ff4730c4047c3f104b061f7a03e9a263c upstream. When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21hwmon: (jz4740) fix signedness bugAxel Lin
commit 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 upstream. wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21iwlwifi: do not re-configure HT40 after associatedWey-Yi Guy
commit 34a5b4b6af104cf18eb50748509528b9bdbc4036 upstream. The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Reported-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21intel-iommu: fix superpage support in pfn_to_dma_pte()Allen Kay
commit 4399c8bf2b9093696fa8160d79712e7346989c46 upstream. If target_level == 0, current code breaks out of the while-loop if SUPERPAGE bit is set. We should also break out if PTE is not present. If we don't do this, KVM calls to iommu_iova_to_phys() will cause pfn_to_dma_pte() to create mapping for 4KiB pages. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21intel-iommu: set iommu_superpage on VM domains to lowest common denominatorAllen Kay
commit 8140a95d228efbcd64d84150e794761a32463947 upstream. set dmar->iommu_superpage field to the smallest common denominator of super page sizes supported by all active VT-d engines. Initialize this field in intel_iommu_domain_init() API so intel_iommu_map() API will be able to use iommu_superpage field to determine the appropriate super page size to use. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21intel-iommu: fix return value of iommu_unmap() APIAllen Kay
commit 292827cb164ad00cc7689a21283b1261c0b6daed upstream. iommu_unmap() API expects IOMMU drivers to return the actual page order of the address being unmapped. Previous code was just returning page order passed in from the caller. This patch fixes this problem. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21target: Handle 0 correctly in transport_get_sectors_6()Roland Dreier
commit 9b5cd7f37e1e018432111333e2a67f78ba41edfe upstream. SBC-3 says: A TRANSFER LENGTH field set to zero specifies that 256 logical blocks shall be written. Any other value specifies the number of logical blocks that shall be written. The old code was always just returning the value in the TRANSFER LENGTH byte. Fix this to return 256 if the byte is 0. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21ptp: Fix clock_getres() implementationThomas Gleixner
commit d68fb11c3dae75c8331538dcf083a65e697cc034 upstream. The clock_getres() function must return the resolution in the timespec argument and return 0 for success. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09oprofile: Fix crash when unloading module (hr timer mode)Robert Richter
commit 87121ca504fd1d963a66b3fb0c72054b0fd9a177 upstream. Oprofile may crash in a KVM guest while unlaoding modules. This happens if oprofile_arch_init() fails and oprofile switches to the hr timer mode as a fallback. In this case oprofile_arch_exit() is called, but it never was initialized properly which causes the crash. This patch fixes this. oprofile: using timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 41da3f067 PUD 41d80e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041de1de98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040) Stack: ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041de1de98> CR2: 0000000000000008 ---[ end trace 06d4e95b6aa3b437 ]--- Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09rtc: Disable the alarm in the hardwareRabin Vincent
commit c0afabd3d553c521e003779c127143ffde55a16f upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09xHCI: fix bug in xhci_clear_command_ring()Andiry Xu
commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 upstream. When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09EHCI : Fix a regression in the ISO schedulerMatthieu CASTET
commit e3420901eba65b1c46bed86d360e3a8685d20734 upstream. Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin
commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: usb-storage: unusual_devs entry for Kingston DT 101 G2Qinglin Ye
commit cec28a5428793b6bc64e56687fb239759d6da74e upstream. Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye <yestyle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: option: add SIMCom SIM5218Veli-Pekka Peltola
commit ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 upstream. Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: option: add Huawei E353 controlling interfacesDirk Nehring
commit 46b1848360c8e634e0b063932a1261062fa0f7d6 upstream. This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring <dnehring@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki
commit 307369b0ca06b27b511b61714e335ddfccf19c4f upstream. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09HID: Correct General touch PIDBenjamin Tissoires
commit b1807719f6acdf18cc4bde3b5400d05d77801494 upstream. Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: whci-hcd: fix endian conversion in qset_clear()Dan Carpenter
commit 8746c83d538cab273d335acb2be226d096f4a5af upstream. qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09Staging: comedi: fix signal handling in read and writeFederico Vaga
commit 6a9ce6b654e491981f6ef7e214cbd4f63e033848 upstream. After sleeping on a wait queue, signal_pending(current) should be checked (not before sleeping). Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09Staging: comedi: fix mmap_countFederico Vaga
commit df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d upstream. In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but it is not incremented at comedi_vm_ops->open. This may result in a negative counter. The patch introduces the open method to keep the counter consistent. The bug was triggerd by this sample code: mmap(0, ...., comedi_fd); fork(); exit(0); Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09staging: comedi: fix oops for USB DAQ devices.Bernd Porr
commit 3ffab428f40849ed5f21bcfd7285bdef7902f9ca upstream. This fixes kernel oops when an USB DAQ device is plugged out while it's communicating with the userspace software. Signed-off-by: Bernd Porr <berndporr@f2s.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09staging: usbip: bugfix for deadlockBart Westgeest
commit 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 upstream. Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep. If interrupts are not disabled, it can potentially lead to a deadlock. The deadlock is readily reproduceable on a slower (ARM based) device such as the TI Pandaboard. Signed-off-by: Bart Westgeest <bart@elbrys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Fix endianess issuesLars-Peter Clausen
commit bda63586bc5929e97288cdb371bb6456504867ed upstream. Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Skip header during CRC generationLars-Peter Clausen
commit c56935bdc0a8edf50237d3b0205133a5b0adc604 upstream. The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Prevent out of bounds memory accessLars-Peter Clausen
commit 4f718a29fe4908c2cea782f751e9805319684e2b upstream. The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: add some loop timeouts in pageflip codeAlex Deucher
commit f64964796dedca340608fb1075ab6baad5625851 upstream. Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09SCSI: Silencing 'killing requests for dead queue'Hannes Reinecke
commit 745718132c3c7cac98a622b610e239dcd5217f71 upstream. When we tear down a device we try to flush all outstanding commands in scsi_free_queue(). However the check in scsi_request_fn() is imperfect as it only signals that we _might start_ aborting commands, not that we've actually aborted some. So move the printk inside the scsi_kill_request function, this will also give us a hint about which commands are aborted. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09revert "mfd: Fix twl4030 dependencies for audio codec"Greg Kroah-Hartman
This reverts commit 11b8fc6ae54bf18a48c94e181c37ca135b858b42, which was commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream. Koen Kooi <koen@dominion.thruhere.net> reports that this shouldn't have been applied to the 3.0 kernel as it isn't relevant there, only 3.1. Reported-by: Koen Kooi <koen@dominion.thruhere.net> Cc: Thomas Weber <weber@corscience.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09hwmon: (coretemp) Fix oops on driver loadJean Delvare
This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. If the CPU microcode is too old, the coretemp driver won't work. But instead of failing gracefully, it currently oops. Check for NULL platform device data to avoid this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde
commit 68fa64ef606bcee688fce46d07aa68f175070156 upstream. Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09p54spi: Fix workqueue deadlockMichael Büsch
commit 2d1618170eb493d18f66f2ac03775409a6fb97c6 upstream. priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09p54spi: Add missing spin_lock_initMichael Büsch
commit 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 upstream. The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09viafb: correct sync polarity for OLPC DCONDaniel Drake
commit a32839696a8eef813a1aff604fbad9a32dff6c95 upstream. While the OLPC display appears to be able to handle either positive or negative sync, the Display Controller only recognises positive sync. This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and fixes a recent regression where the XO-1.5 DCON could no longer be frozen. Thanks to Florian Tobias Schandinat for helping identify the fix. Test case: from a vt, echo 1 > /sys/devices/platform/dcon/freeze should cause the current screen contents to freeze, rather than garbage being displayed. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: fix up gpio i2c mask bits for r4xxAlex Deucher
commit 6c47e5c23aa2a7c54ad7ac13af4bd56cd9e703bf upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDsBjorn Helgaas
commit 4cac2eb158c6da0c761689345c6cc5df788a6292 upstream. Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung <ralfjung-e@gmx.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: fix CB tuning check for ILK+Jesse Barnes
commit cb0e093162d7b6589c2217a00e2abfef686b32d6 upstream. CB tuning is needed to handle potential process variations that might cause clock jitter for certain PLL settings. However, we were setting it incorrectly since we were using the wrong M value as a check (M1 when we needed to use the whole M value). Fix it up, making my HDMI attached display a little prettier (used to have occasional dots crawl across the display). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Timo Aaltonen <timo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/ttm: request zeroed system memory pages for new TT buffer objectsBen Skeggs
commit ff02b13f6867af72682d7a9bb9bd705f9af2bab0 upstream. Fixes an information leak to userspace, we were handing out un-zeroed pages for any newly created TTM_PL_TT buffer. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Turn on another required clock gating bit on gen6.Eric Anholt
commit 9ca1d10d748e56964de95e3ed80211b192f56cf4 upstream. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Turn on a required 3D clock gating bit on Sandybridge.Eric Anholt
commit 406478dc911e16677fbd9c84d1d50cdffbc031ab upstream. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Ivybridge still has fences!Daniel Vetter
commit 775d17b6ca4357048f36c22151335addfe15db4b upstream. So don't forget to restore them on resume and dump them into the error state. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: fix up gpio i2c mask bits for r4xx for realAlex Deucher
commit d724502a9d7a46f4a56a1663b1f50d2dc9d1ef40 upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm: integer overflow in drm_mode_dirtyfb_ioctl()Xi Wang
commit a5cd335165e31db9dbab636fd29895d41da55dd2 upstream. There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-06 02:45:30 +0000