summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-06serial: apbuart: Fixup apbuart_console_init()Thomas Gleixner
commit 35c64e5d (drivers: serial: apbuart: Handle OF failures gracefully) missed that the modified grlib_apbuart_configure() function is called from apbuart_console_init() as well. Fix the fallout. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16TTY: Add tty ioctl to figure device node of the system console.Werner Fink
This has been in the SuSE kernels for a very long time. Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16tty: add 'active' sysfs attribute to tty0 and console deviceKay Sievers
tty: add 'active' sysfs attribute to tty0 and console device Userspace can query the actual virtual console, and the configured console devices behind /dev/tt0 and /dev/console. The last entry in the list of devices is the active device, analog to the console= kernel command line option. The attribute supports poll(), which is raised when the virtual console is changed or /dev/console is reconfigured. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> index 0000000..b138b66
2010-12-16drivers: serial: apbuart: Handle OF failures gracefullyThomas Gleixner
The apbuart driver depends on OF and relies on everything being available. So if it's probed on a platform which has OF support, but no device tree is available it crashes. Triggered by the upcoming x86 OF support in randconfig testing. Further it's inconsistent vs. the probing and exiting from the of_match loop. Make it robust and consistent: - check the availablility of OF nodes before dereferencing - return -ENODEV when the device tree lookup fails - return -ENODEV when no uart port configuration is found - return -ENODEV when invalid uart port configuration is found Remove the enum_done check while at it. Driver init functions are only called once. Remove the pointless vendor and device queries as well. Reported-by: Ingo Molnar <mingo.elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16Serial: Avoid unbalanced IRQ wake disable during resumeGovindraj.R
To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled only when wakeups have been successfully enabled. Tested on OMAP3630SDP/ZOOM3. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16pch_uart : fix warnings for 64bit compileTomoya MORINAGA
Fix the following warnings drivers/serial/pch_uart.c: In function ‘dma_handle_rx’: drivers/serial/pch_uart.c:685:24: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘dma_handle_tx’: drivers/serial/pch_uart.c:778:23: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_init_port’: drivers/serial/pch_uart.c:1289:20: warning: cast to pointer from integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_exit_port’: drivers/serial/pch_uart.c:1328:2: warning: cast from pointer to integer of different size Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reported-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-108250: fix uninitialized FIFOsOndrej Puzman
I have found a bug in 8250.c driver which causes that 16550A uart FIFOs are not turned on during initialization if they are manually configured by setserial. UART is then working only as plain 16450 without FIFOs. On systems with higher interrupt latency this causes buffer overruns and loss of received data when using higher communication speeds. I'm working for a company which produces industrial computers. These devices typically contain high number (8 or more) of traditional 16550A uarts - we use TL16C554A chips, but that is not much relevant. UARTs are connected to the CPU by ISA bus (Celeron based devices) or LPC bus (Atom based devices). In the Linux the UARTs are using standard 8250.c driver and are initialized using setserial command: setserial /dev/ttyS4 uart 16550A port 0x3E0 irq 10 baud_base 115200 This executes the UART initialization through serial8250_startup() function. At the beginning of the function up->capabilities is initialized from uart_config: up->capabilities = uart_config[up->port.type].flags; Please note that neither up->port.fifosize nor up->tx_loadsz is initialized here!! Later in the same function serial8250_clear_fifos() is called and disables FIFOs. The above comment says that they will be reenabled in set_termios (they won't ...) After serial8250_startup() the serial8250_set_termios() is called. In this function the following check fails because up->port.fifosize is zero because it is not initialized correctly. if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { if (baud < 2400) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; else fcr = uart_config[up->port.type].fcr; } fcr variable remains zero and in the end the FCR register is set to zero which results in disabled FIFOs even if the UART type is 16550A. This is also true for other types of UARTs with FIFOs. If the UART is autoconfigured via 'setserial /dev/ttySx autoconfig' then port.fifosize and tx_loadsz are initialized correctly in the autoconfig() function and the UART is working correctly then. I checked the source codes and I can say that this bug is present in 2.6.x series of kernels for a couple of years. Namely I can confirm its presence in 2.6.16.57, 2.6.32.24 and 2.6.36.1 (tested all of them on our hardware). I think it was not noticed before because not many people use manually configured non PNP UARTs on ISA/LPC bus these days. Also the data loss caused by buffer overruns occures only if IRQ latency is higher then time needed to receive one character on given communication speed. For example our hardware looses received characters only if the UARTs are connected throught LPC bus with SERIRQ (serial IRQ transport) and not if they are connected to ISA bus because LPC SERIRQ has higher interrupt latency then parallel ISA interupt lines. Here is the patch to correct the bug created against 2.6.36.1: Signed-off-by: Ondrej Puzman <puzman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10ip2: fix compiler warning on ip2main_pci_tblNamhyung Kim
Annotate ip2main_pci_tbl as '__used' to fix following warning: CC drivers/char/ip2/ip2main.o drivers/char/ip2/ip2main.c:3227: warning: ‘ip2main_pci_tbl’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: "Michael H. Warfield" <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10specialix: fix compiler warning on specialix_pci_tblNamhyung Kim
Annotate specialx_pci_tbl as '__used' to fix following warning: CC drivers/char/specialix.o drivers/char/specialix.c:2358: warning: ‘specialx_pci_tbl’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Roger Wolff <R.E.Wolff@BitWizard.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10rocket: fix compiler warning on rocket_pci_idsNamhyung Kim
Annotate rocket_pci_ids as '__used' to fix following warning: CC drivers/char/rocket.o drivers/char/rocket.c:1767: warning: ‘rocket_pci_ids’ defined but not used Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-108250: add a UPIO_DWAPB32 for 32 bit accessesJamie Iles
Some platforms contain a Synopsys DesignWare APB UART that is attached to a 32-bit APB bus where sub-word accesses are not allowed. Add a new IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART. v2: - don't test for 32 bit in the output fast path, provide a separate dwabp32_serial_out() function. Refactor dwabp_serial_out() so that we can reuse the LCR saving code. v3: - rebased on top of "8250: use container_of() instead of casting" Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-108250: use container_of() instead of castingJamie Iles
The 8250 driver structure uart_8250_port took advantage of the fact that the struct uart_port was the first member of its structure and used an explicit cast to convert to the derived class. Replace the explicit casts with container_of() for safety and clarity. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10serial: omap-serial: Add support for kernel debuggerCosmin Cojocar
The kgdb invokes the poll_put_char and poll_get_char when communicating with the host. This patch also changes the initialization order because the kgdb will check at the very beginning, if there is a valid serial driver. Signed-off-by: Cosmin Cojocar <cosmin.cojocar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10serial: fix pch_uart kconfig & buildRandy Dunlap
The dma_request_channel/dma_release_channel interfaces are not built when DMADEVICES is not enabled, so make the driver depend on DMADEVICES. Also, the help text says that the driver enables & uses PCH_DMA, which is not enabled, so select that. ERROR: "__dma_request_channel" [drivers/serial/pch_uart.ko] undefined! ERROR: "dma_release_channel" [drivers/serial/pch_uart.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30drivers: char: hvc: add arm JTAG DCC console supportDaniel Walker
This driver adds a basic console that uses the arm JTAG DCC to transfer data back and forth. It has support for ARMv6 and ARMv7. This console is created under the HVC driver, and should be named /dev/hvcX (or /dev/hvc0 for example). Cc: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30serial: ifx6x60: fix memory leakVasiliy Kulikov
If tty_register_driver() failed then tty_driver is still alive. Free it with put_tty_driver(). Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30serial: ifx6x60: free IRQ on errorVasiliy Kulikov
If second request_irq() failed then the first IRQ must be freed in error handling code. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30Serial: EG20T: add PCH_UART driverTomoya MORINAGA
UART driver of Intel EG20T(Topcliff) PCH Intel EG20T PCH is the platform controller hub that is going to be used in Intel's general embedded platform. All IO peripherals in Intel EG20T PCH are actually devices sitting on AMBA bus. Intel EG20T PCH has UART I/F. Using this I/F, it is able to access system devices connected to UART. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30Serial: ce4100: Add PCI UART support for the ce4100Dirk Brandewie
This patch adds support for the PCI UART on the ce4100. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: ifx6x60: Fix missing include for msleepAlan Cox
Noted by Stephen Rothwell Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: ifx6x60: The IFX requires SPIAlan Cox
Correct the KConfig as noted by Greg. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: mpc52xx: make printout for type more genericWolfram Sang
The printout for the type should be just "5xxx", so 512x users won't wonder why they have a mpc52xx-type UART. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16VIDEO: xen-fb, switch to for_each_consoleJiri Slaby
Use newly added for_each_console for iterating consoles. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: virtualization@lists.osdl.org Cc: xen-devel@lists.xensource.com Cc: linux-fbdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11serial: cpu_uart: Remove unused uart_cpm_port fieldsBaurzhan Ismagulov
AFAICT, these fields are not used anywhere. Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11serial: cpm_uat: reducing CPM serial latencyBaurzhan Ismagulov
Setting Rx FIFO size to 1 reduces reader process wakeup latency up to 20x for baud rates <= 9600. This patch sets the Rx FIFO size to 1 for baud rates <= 9600 or if low latency has been requested for the tty. Signed-off-by: Michael Trimarchi <michael@gandalf.sssup.it> Signed-off-by: Bruno Morelli <bruno@evidence.eu.com> Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11n_gsm: clean up printksAlan Cox
[Original From Ken Mills but I redid it using pr_ helpers instead] Also fix up coding style, there are two warnings left but that is where the CodingStyle tools blow up because they cannot handle if (blah) { foo } else switch (x) { case 1: } Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11n_gsm: Fix support for legacy encodingAlan Cox
The mux supports several encoding schemes. Encoding 0 is a "not recommended" mode still sometimes used. This has now been tested with hardware that supports this mode, and found wanting. Fix the FCS handling in this mode and correct the state machine. Signed-off-by: Ken Mills <ken.k.mills@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11serial: Add support for UART on VIA VT8500 and compatiblesAlexey Charkov
This adds a driver for the serial ports found in VIA and WonderMedia Systems-on-Chip. Interrupt-driven FIFO operation is implemented. The hardware also supports pure register-based operation (which is slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes long, DMA operation is probably not worth the hassle. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-11ifx6x60: SPI protocol driver for Infineon 6x60 modemRuss Gorby
Prototype driver for the IFX6x60 series of SPI attached modems by Jim Stanley and Russ Gorby Signed-off-by: Russ Gorby <richardx.r.gorby@intel.com> [Some reworking and a major cleanup] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: TTY: move .gitignore from drivers/char/ to drivers/tty/vt/ TTY: create drivers/tty/vt and move the vt code there TTY: create drivers/tty and move the tty core files there
2010-11-08Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6: Staging: ath6kl: remove empty files that mess with 'distclean' staging: ath6kl: Fixing the driver to use modified mmc_host structure Staging: solo6x10: fix build problem
2010-11-08Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
2010-11-08Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Fix up checkpatch warnings. sh: make some needlessly global sh7724 clocks static sh: add clk_round_parent() to optimize parent clock rate sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit. sh: nommu: Support building without an uncached mapping. sh: nommu: use 32-bit phys mode. sh: mach-se: Fix up SE7206 no ioport build. sh: intc: Update for single IRQ reservation helper. sh: clkfwk: Fix up rate rounding error handling. sh: mach-se: Rip out superfluous 7751 PIO routines. sh: mach-se: Rip out superfluous 770x PIO routines. sh: mach-edosk7705: Kill off machtype, consolidate board def. sh: mach-edosk7705: update for this century, kill off PIO trapping. sh: mach-se: Rip out superfluous 7206 PIO routines. sh: mach-systemh: Kill off dead board. sh: mach-snapgear: Kill off machtype, consolidate board def. sh: mach-snapgear: Rip out superfluous PIO routines. sh: mach-microdev: SuperIO-relative ioport mapping.
2010-11-08Merge branch 'rmobile/core' into rmobile-fixes-for-linusPaul Mundt
2010-11-08Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and ↵Paul Mundt
'sh/intc-extension' into sh-fixes-for-linus
2010-11-08sh: clkfwk: Fix up checkpatch warnings.Paul Mundt
The clk_round_parent() change introduced various checkpatch warnings, tidy them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08sh: add clk_round_parent() to optimize parent clock rateGuennadi Liakhovetski
Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-06Staging: ath6kl: remove empty files that mess with 'distclean'Greg Kroah-Hartman
These two .h files would get removed from the tree when doing make distclean It turns out they are not needed at all, so just delete them which fixes people's git trees when doing development. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-06floppy: fix another use-after-freeVivek Goyal
While scanning the floopy code due to c093ee4f07f4 ("floppy: fix use-after-free in module load failure path"), I found one more instance of trying to access disk->queue pointer after doing put_disk() on gendisk. For some reason , floppy moule still loads/unloads fine. The object is probably still around with right pointer values. o There seems to be one more instance of trying to cleanup the request queue after we have called put_disk() on associated gendisk. o This fix is more out of code inspection. Even without this fix for some reason I am able to load/unload floppy module without any issues. o Floppy module loads/unloads fine after the fix. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05TTY: move .gitignore from drivers/char/ to drivers/tty/vt/Greg Kroah-Hartman
The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to be ignored by git, so move the .gitignore file that was doing it to the properly location now that the files have moved as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05ipw2x00: remove the right /proc/net entryLinus Torvalds
Commit 27ae60f8f7aa ("ipw2x00: replace "ieee80211" with "libipw" where appropriate") changed DRV_NAME to be "libipw", but didn't properly fix up the places where it was used to specify the name for the /proc/net/ directory. For backwards compatibility reasons, that directory name remained "ieee80211", but due to the DRV_NAME change, the error case printouts and the cleanup functions now used "libipw" instead. Which made it all fail badly. For example, on module unload as reported by Randy: WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e() name 'libipw' because it's trying to unregister a /proc directory that obviously doesn't even exist. Clean it all up to use DRV_PROCNAME for the actual /proc directory name. Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Pavel Roskin <proski@gnu.org> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05floppy: fix use-after-free in module load failure pathLinus Torvalds
Commit 488211844e0c ("floppy: switch to one queue per drive instead of sharing a queue") introduced a use-after-free. We do "put_disk()" on the disk device _before_ we then clean up the queue associated with that disk. Move the put_disk() down to avoid dereferencing a free'd data structure. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Vivek Goyal <vgoyal@redhat.com> Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) inet_diag: Make sure we actually run the same bytecode we audited. netlink: Make nlmsg_find_attr take a const nlmsghdr*. fib: fib_result_assign() should not change fib refcounts netfilter: ip6_tables: fix information leak to userspace cls_cgroup: Fix crash on module unload memory corruption in X.25 facilities parsing net dst: fix percpu_counter list corruption and poison overwritten rds: Remove kfreed tcp conn from list rds: Lost locking in loop connection freeing de2104x: fix panic on load atl1 : fix panic on load netxen: remove unused firmware exports caif: Remove noisy printout when disconnecting caif socket caif: SPI-driver bugfix - incorrect padding. caif: Bugfix for socket priority, bindtodev and dbg channel. smsc911x: Set Ethernet EEPROM size to supported device's size ipv4: netfilter: ip_tables: fix information leak to userland ipv4: netfilter: arp_tables: fix information leak to userland cxgb4vf: remove call to stop TX queues at load time. cxgb4: remove call to stop TX queues at load time. ...
2010-11-05Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix race when reading count in AR descriptor firewire: ohci: avoid reallocation of AR buffers firewire: ohci: fix race in AR split packet handling firewire: ohci: fix buffer overflow in AR split packet handling
2010-11-05Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (ltc4261) Fix error message format hwmon: (ltc4261) Add missing newline in debug message
2010-11-05hwmon: (ltc4261) Fix error message formatJean Delvare
adapter->id is deprecated and not set by any adapter driver, so this was certainly not what the author wanted to use. adapter->nr maybe, but as dev_err() already includes this value, as well as the client's address, there's no point repeating them. Better print a simple error message in plain English words. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-05hwmon: (ltc4261) Add missing newline in debug messageGuenter Roeck
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-05leds-net5501: taints kernel, add licenseRandy Dunlap
Add MODULE_LICENSE() that matches file comments so that kernel is not tainted. leds_net5501: module license 'unspecified' taints kernel. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05TTY: create drivers/tty/vt and move the vt code thereGreg Kroah-Hartman
The vt and other related code is moved into the drivers/tty/vt directory. Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05TTY: create drivers/tty and move the tty core files thereGreg Kroah-Hartman
The tty code should be in its own subdirectory and not in the char driver with all of the cruft that is currently there. Based on work done by Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-20 09:58:24 +0000