summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-05-09Bluetooth: btusb: Dynamic alternate settingMikel Astiz
The alternate setting must be dynamically set according to the number of active SCO links, and the bit depth of the audio. The possible values for the alternate setting are described in the Bluetooth Core Specification, Volume 4, Part B, section 2.1.1. Signed-off-by: Mikel Astiz <mikel.astiz.oss@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: btmrvl_sdio: remove pointless conditional before release_firmware()Jesper Juhl
release_firmware() deals gracefullt with NULL pointers so there's no reason to test for one prior to calling the function. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: vhci: Ignore return code of nonseekable_open()David Herrmann
The comment in ./fs/open.c clearly states that nonseekable_open() will never fail. Therefore, we can safely ignore the return code. This is the recommended way to deal with nonseekable_open(). Our current code looks like nonseekable_open() is checked for the return code. However, if we check the return code, we must also kfree() our private data if the open fails. To avoid this overhead and to avoid confusion, we simply drop the return code and return 0. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-09Bluetooth: Remove redundant hdev->parent fieldDavid Herrmann
We initialize the "struct device" in hci_alloc_dev() for a long time now so we can access hdev->dev.parent directly. Hence, we can drop the temporary field hdev->parent which is used in no other place than hci_add_sysfs(). SET_HCIDEV_DEV() is never called after registering a device by the drivers so we do not overwrite internal device-state. Furthermore, hdev->dev is initialized to 0 by kzalloc() inside hci_alloc_dev() so the default behavior with dev.parent = NULL is kept. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-08iwlwifi: fix-up some merge damage from commit 0d6c4a2John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: add out of band interrupt supportFranky Lin
Some sdio host controllers do not support real in band interrupt. Software polling mode as a replacement is not fast enough for high throughput and new features. Also some in band interrupts do not support host wake up on embedded platform even when they are real physical interrupts. Therefore out of band (oob) interrupt mechanism is implemented for these scenarios. To provide oob irq number and flags used for irq registration in brcmfmac, a platform device contains irq resource must be registered in board specific code. Here is an example of platform device structure: struct resource brcmf_sdio_res[] = { { .start = GPIO_BRCMF_SDIO_OOB_NUM, .end = GPIO_BRCMF_SDIO_OOB_NUM, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, } }; struct platform_device brcmf_sdio_device = { .name = "brcmf_sdio_pd", .id = -1, .num_resources = ARRAY_SIZE(brcmf_sdio_res), .resource = brcmf_sdio_res, }; Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: postpone interrupt register functionFranky Lin
For out of band interrupt which is going to be introduced shortly, the interrupt register function must be called after firmware is downloaded. This patch moves it from brcmf_sdbrcm_probe to brcmf_sdbrcm_bus_init. Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: check bus state for statusFranky Lin
Bus state should be the correct flag for bus status. Use it instead of result from previous function call for backplane clock switch. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: stop releasing sdio host in irq handlerFranky Lin
brcmf_sdbrcm_isr doesn't access to the dongle through SDIO bus. Stop releasing and claiming host in irq handler to eliminate any potential risk. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08iwlwifi: use 6000G2B for 6030 device seriesWey-Yi Guy
"iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08iwlwifi: use correct released ucode versionMeenakshi Venkataraman
Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08ipw2100: Fix order of device registrationBen Hutchings
Currently cfg80211 fails to create a "phy80211" symlink in sysfs from the net device to the wiphy device. The latter needs to be registered first. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08ipw2200: Fix order of device registrationBen Hutchings
Currently cfg80211 fails to create a "phy80211" symlink in sysfs from the net device to the wiphy device. The latter needs to be registered first. Compile-tested only. Reported-by: Cesare Leonardi <celeonar@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08rt2x00: Add debugfs access for rfcsr registerAnisse Astier
RFCSR is only used in rt2800. For other chipsets, the debug struct for rfcsr should be zeroed, which isn't be an issue, since the code can now cope with that. Signed-off-by: Anisse Astier <anisse@astier.eu> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08rt2x00: debugfs support - allow a register to be emptyAnisse Astier
Allow a register to be unspecified, therefore not creating its debugfs file entry. Signed-off-by: Anisse Astier <anisse@astier.eu> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08net/wireless: ipw2200: Fix WARN_ON occurring in wiphy_register called by ↵Stanislav Yakovlev
ipw_pci_probe The problem was found by Stefan Lippers-Hollmann http://marc.info/?l=linux-wireless&m=132720334512946&w=2 WARNING: at /tmp/buildd/linux-aptosid-3.2/debian/build/source_i386_none/net/wireless/core.c:562 wiphy_register+0x45/0x38d [cfg80211]() Hardware name: TravelMate 290 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff Modules linked in: ipw2200(+) iTCO_wdt libipw joydev drm snd_seq snd_timer snd_seq_device iTCO_vendor_support yenta_socket snd intel_agp i2c_i801 pcmcia_rsrc cfg80211 soundcore parport_pc psmouse parport rng_core snd_page_alloc serio_raw pcspkr i2c_algo_bit intel_gtt pcmcia_core evdev irda crc_ccitt rfkill lib80211 processor container ac battery shpchp pci_hotplug button ext4 mbcache jbd2 crc16 dm_mod sd_mod sr_mod crc_t10dif cdrom ata_generic pata_acpi ata_piix libata scsi_mod firewire_ohci firewire_core crc_itu_t 8139too 8139cp mii uhci_hcd ehci_hcd usbcore usb_common [last unloaded: scsi_wait_scan] Pid: 328, comm: modprobe Not tainted 3.2-1.slh.4-aptosid-686 #1 Call Trace: [<c012eaf4>] ? warn_slowpath_common+0x7c/0x8f [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211] [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211] [<c012eb22>] ? warn_slowpath_null+0x1b/0x1f [<e0ff0b3e>] ? wiphy_register+0x45/0x38d [cfg80211] [<c01f89d7>] ? internal_create_group+0xf5/0xff [<e0a2de1c>] ? ipw_pci_probe+0xa9a/0xbd0 [ipw2200] [<c01519f4>] ? arch_local_irq_save+0xf/0x14 [<c0252986>] ? pci_device_probe+0x53/0x9a [<c02c2820>] ? driver_probe_device+0x94/0x124 [<c0252871>] ? pci_match_id+0x15/0x34 [<c02c28f0>] ? __driver_attach+0x40/0x5b [<c02c1d81>] ? bus_for_each_dev+0x37/0x60 [<c02c25aa>] ? driver_attach+0x17/0x1a [<c02c28b0>] ? driver_probe_device+0x124/0x124 [<c02c22c4>] ? bus_add_driver+0x92/0x1d1 [<e099d000>] ? 0xe099cfff [<c02c2cb8>] ? driver_register+0x7d/0xd4 [<c017cd50>] ? jump_label_module_notify+0xec/0x167 [<e099d000>] ? 0xe099cfff [<c0253017>] ? __pci_register_driver+0x32/0x87 [<e099d000>] ? 0xe099cfff [<e099d02e>] ? ipw_init+0x2e/0x72 [ipw2200] [<c0101173>] ? do_one_initcall+0x7d/0x132 [<c0145016>] ? __blocking_notifier_call_chain+0x47/0x4f [<c0154a73>] ? sys_init_module+0x13a4/0x159c [<c03a639f>] ? sysenter_do_call+0x12/0x28 This warning appears only if we apply Ben Hutchings' fix http://marc.info/?l=linux-wireless&m=132720195012653&w=2 for the bug reported by Cesare Leonardi http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656813 with cfg80211 warning during device registration ("cfg80211: failed to add phy80211 symlink to netdev!"). We separate device bring up and registration with network stack to avoid the problem. After that Ben Hutchings' fix can be applied to fix the bug. Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08iwlwifi: remove the iwl_shared referenceWey-Yi Guy
Change-Id: I10e42e0cc7dd91047f093ea2c5a55d65c004ada6 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1939 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2012-05-08iwlwifi: modify #ifdef to avoid sparse complainWey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08mwifiex: fix static checker warningsAmitkumar Karwar
"oui_type" in structure "ieee_types_vendor_header" is not used separately, so include it in "oui" array. Now complete oui will be compared fixing following warnings. drivers/net/wireless/mwifiex/sta_ioctl.c:1410 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/sta_ioctl.c:1435 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1177 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1185 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mwifiex: add support for SD8786 sdioWarheadsSE
modified: drivers/net/wireless/mwifiex/Kconfig - notate additional chipset modified: drivers/net/wireless/mwifiex/sdio.c - add definition of id (0x9116) - add to switch for firmware load - add MODULE_FIRMWARE modified: drivers/net/wireless/mwifiex/sdio.h - add definition of default firmware name Signed-off-by: Jason Plum <max@warheads.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08wireless: at76c50x: allocating too much dataDan Carpenter
This is a cut and paste mistake, sizeof(struct mib_local) was intended instead of sizeof(struct mib_phy). The call to at76_get_mib() uses sizeof(struct mib_local) correctly, although I changed that to sizeof(*m) for style reasons after discussion with some of the wireless maintainers. The current code works fine because mib_phy structs are larger than mib_local structs. But we may as well clean it up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08iwlwifi: don't init trans->reg_lock from the op_modeEmmanuel Grumbach
This doesn't make any sense. Init it from the transport instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: add option to disable 5GHz bandStanislaw Gruszka
There are various problems happened on 5GHz band not observed on 2.4 GHz (microcode errors, queue stuck, etc... ) . Also roaming between 5GHz AP and 2GHz does not work very well. To workaround the problems add option to disable 5GHz support. This will help on environments where APs are dual-band, and devices will not try to associate on band where issues happen. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: use IWL_* instead of dev_printk when possibleEmmanuel Grumbach
Also remove a debug print when allocation error occurred. The kernel will complain anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: add loose coex lutWey-Yi Guy
Add the Loose coex LUT and will use later for better bt coex tpt Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: change kill mask based on reduce power stateWey-Yi Guy
In bt coex, consider reduce tx power as part of ack/cts kill mask Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: send reduce tx power info in commandWey-Yi Guy
Add the reduce tx power information in bt coex host command Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: small define changeWey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: add reduced tx power threshold defineWey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: add checking for the condition to reduce tx powerWey-Yi Guy
When bluetooth coex is active and certain condition matched, driver need to decide should the tx power been reduce or not. Adding the logic to manage it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: add BT reduced tx power flagWey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08iwlwifi: remove unused macrosWey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-05-08libertas: include sched.h on firmware.cLuis R. Rodriguez
Do not assume we have our subsystem including this for us, at least for older kernels this is not true. Lets just be explicit about this requirement for the usage of wake_up(). Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-07smsc75xx: let EEPROM determine GPIO/LED settingsSteve Glendinning
This patch allows the GPIO/LED settings to be configured by the EEPROM if present, and only sets the default values (LED outputs for link/activity) when an EEPROM is not detected. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07smsc75xx: eliminate unnecessary phy register readSteve Glendinning
Only a write is necessary to clear the interrupt status, and we don't use the value from the preceding read operation. This patch eliminates the unnecessary read. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07smsc75xx: replace 0xffff with PHY_INT_SRC_CLEAR_ALLSteve Glendinning
This patch defines PHY_INT_SRC_CLEAR_ALL to replace the value 0xffff in order to be more self-documenting. This patch should make no functional change, it is purely cosmetic. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07Merge branch 'vhost-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Michael S. Tsirkin says: -------------------- There are mostly bugfixes here. I hope to merge some more patches by 3.5, in particular vlan support fixes are waiting for Eric's ack, and a version of tracepoint patch might be ready in time, but let's merge what's ready so it's testable. This includes a ton of zerocopy fixes by Jason - good stuff but too intrusive for 3.4 and zerocopy is experimental anyway. virtio supported delayed interrupt for a while now so adding support to the virtio tool made sense -------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.David Daney
The GPIO pins select which sub bus is connected to the master. Initially tested with an sn74cbtlv3253 switch device wired into the MDIO bus. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07netdev/of/phy: Add MDIO bus multiplexer support.David Daney
This patch adds a somewhat generic framework for MDIO bus multiplexers. It is modeled on the I2C multiplexer. The multiplexer is needed if there are multiple PHYs with the same address connected to the same MDIO bus adepter, or if there is insufficient electrical drive capability for all the connected PHY devices. Conceptually it could look something like this: ------------------ | Control Signal | --------+--------- | --------------- --------+------ | MDIO MASTER |---| Multiplexer | --------------- --+-------+---- | | C C h h i i l l d d | | --------- A B --------- | | | | | | | PHY@1 +-------+ +---+ PHY@1 | | | | | | | --------- | | --------- --------- | | --------- | | | | | | | PHY@2 +-------+ +---+ PHY@2 | | | | | --------- --------- This framework configures the bus topology from device tree data. The mechanics of switching the multiplexer is left to device specific drivers. The follow-on patch contains a multiplexer driven by GPIO lines. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07netdev/of/phy: New function: of_mdio_find_bus().David Daney
Add of_mdio_find_bus() which allows an mii_bus to be located given its associated the device tree node. This is needed by the follow-on patch to add a driver for MDIO bus multiplexers. The of_mdiobus_register() function is modified so that the device tree node is recorded in the mii_bus. Then we can find it again by iterating over all mdio_bus_class devices. Because the OF device tree has now become an integral part of the kernel, this can live in mdio_bus.c (which contains the needed mdio_bus_class structure) instead of of_mdio.c. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/capi: elliminate capincci_find() in non-middleware caseTilman Schmidt
If Kernel CAPI is compiled without CONFIG_ISDN_CAPI_MIDDLEWARE, the structure retrieved via capincci_find() is never actually used, so don't compile that function in that case. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/capi: fix readability damageTilman Schmidt
Fix up some of the readibility deterioration caused by the recent whitespace coding style cleanup. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: unify function return valuesTilman Schmidt
Various functions in the Gigaset driver were using different conventions for the meaning of their int return values. Align them to the usual negative error numbers convention. Inspired-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: internal function name cleanupTilman Schmidt
Functions clear_at_state and free_strings did the same thing; drop one of them, keeping the more descriptive name. Drop a redundant call. Rename function dealloc_at_states to dealloc_temp_at_states to clarify its purpose. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: fix readability damageTilman Schmidt
Fix up some of the readibility deterioration caused by the recent whitespace coding style cleanup. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: improve error handling querying firmware versionTilman Schmidt
An out-of-place "OK" response to the "AT+GMR" (get firmware version) command turns out to be, more often than not, a delayed response to a previous command rather than an actual error, so continue waiting for the version number in that case. Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: fix CAPI disconnect B3 handlingTilman Schmidt
If DISCONNECT_B3_IND was synthesized because of a DISCONNECT_REQ with existing logical connections, the connection state wasn't updated accordingly. Also the emitted DISCONNECT_B3_IND message wasn't included in the debug log as requested. This patch fixes both of these issues. Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07isdn/gigaset: ratelimit CAPI message dumpsTilman Schmidt
Introduce a global ratelimit for CAPI message dumps to protect against possible log flood. Drop the ratelimit for ignored messages which is now covered by the global one. Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-11 09:49:39 +0000