summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-01-13qeth: avoid recovery during device online settingUrsula Braun
If a qeth device is set online, several initialisation steps are performed. If a failure in one of these steps occurs, the qeth device is reset into DOWN state. If due to the failure a qeth recovery is scheduled and started in another thread, this might cause all kinds of conflicts, even a kernel panic. The patch forbids scheduling of a qeth recovery while online processing is performed till the card is in state SOFTSETUP. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13qeth: HiperSockets Network Traffic AnalyzerUrsula Braun
New feature to trace HiperSockets network traffic for debugging purposes. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: genericize the update multicast address listBruce Allan
Make updating the multicast address list generic for all families and enforce the requirement to update the entire multicast table array all at once instead of piecemeal which causes problems on some parts. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: provide MAC-family-specific function to set LAN IDBruce Allan
Provide MAC-specific function pointer to determine the LAN ID (PCI func). The LAN ID is used internally by the driver to determine which h/w lock to use to protect accessing the PHY on ESB2 as well as help to determine the alternate MAC address on some parts. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: use alternate MAC address on ESB2 if availableBruce Allan
Similar to 82571/2/3 parts that already do this, if ESB2/80003es2lan parts have an alternate MAC address provided in the EEPROM use it instead of the default MAC address. This patch makes the the actual code that does this generic so that it can be better used by both MAC families. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12can: Unify droping of invalid tx skbs and netdev statsOliver Hartkopp
To prevent the CAN drivers to operate on invalid socketbuffers the skbs are now checked and silently dropped at the xmit-function consistently. Also the netdev stats are consistently using the CAN data length code (dlc) for [rx|tx]_bytes now. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
2010-01-10vxge: use pci_dma_mapping_error to test return valueDenis Kirjanov
pci_dma_mapping_error should be used to test return value of pci_map_single or pci_map_page. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Fix ethtool diag test for VT mode operationGreg Rose
Skip MAC loopback test when the adapter is set to a VT mode such as SR-IOV or VMDq Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV features to main moduleGreg Rose
Adds SR-IOV features supported by the 82599 controller to the main driver module. If the CONFIG_PCI_IOV kernel option is selected then the SR-IOV features are enabled. Use the max_vfs module option to allocate up to 63 virtual functions per physical port. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV feature enablement codeGreg Rose
Adds code to the core 82599 module to support SR-IOV features of the 82599 network controller Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV specific modules to driver MakefileGreg Rose
Add the mailbox and SR-IOV feature modules to the ixgbe driver Makefile. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV specific featuresGreg Rose
This module and header file add functions to support SR-IOV features of the 82599 10Gbe controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV register, structure and bit definesGreg Rose
This patch adds register definitions, bit definitions and structures used by the driver to support SR-IOV features of the 82599 controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Mailbox header and code moduleGreg Rose
The 82599 virtual function device and the master 82599 physical function device implement a mailbox utility for communication between the devices using some SRAM scratch memory and a doorbell/answering mechanism enabled via interrupt and/or polling. This C module and accompanying header file implement the base functions for use of this feature. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: Kconfig, Makefile and DocumentationGreg Rose
Modifications for the Kconfig and network device Makefile to add the ixgbevf driver module to the kernel plus basic driver documentation. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: Driver MakefileGreg Rose
82599 Virtual Function Device Driver Makefile Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: Driver main and ethool interface module and main headerGreg Rose
These modules and header contain the Linux OS network interface code and core interrupt and network send/receive handlers. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: Mailbox communicationGreg Rose
The 82599 virtual function device and the master 82599 physical function device implement a mailbox utility for communication between the devices using some SRAM scratch memory and a doorbell/answering mechanism enabled via interrupt and/or polling. This C module and accompanying header file implement the base functions for use of this feature. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: 82599 Virtual Function core functions and headerGreg Rose
This module and header file contain the core functions for the 82599 virtual function device. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbevf: Macros, data structures, useful defines and registersGreg Rose
These two headers define the commonly used macros, data structures, register bits and register offsets used by the ixgbevf driver on the 82599 virtual function device Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-09mac8390: Fix build breakageGeert Uytterhoeven
commit 18c0019102228875cb0f6f252dad5148491e96b2 ("drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(") broke the build: | drivers/net/mac8390.c:306: error: expected ')' before 'version' as "version" is not a string literal, but a variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08igb: add support for device reset interruptAlexander Duyck
This patch adds support for the global device reset interrupt. Without this change the drivers will report tx hangs on all ports when a global device reset occurs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08can: mscan-mpc5xxx: add support for the MPC512x processorWolfgang Grandegger
The main differences compared to the MSCAN on the MPC5200 are: - More flexibility in choosing the CAN source clock and frequency: Three different clock sources can be selected: "ip", "ref" or "sys". For the latter two, a clock divider can be defined as well. If the clock source is not specified by the device tree, we first try to find an optimal CAN source clock based on the system clock. If that is not possible, the reference clock will be used. - The behavior of bus-off recovery is configurable: To comply with the usual handling of Socket-CAN bus-off recovery, "recovery on request" is selected (instead of automatic recovery). Note that only MPC5121 Rev. 2 and later is supported. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08can: mscan: fix improper return if dlc < 8 in start_xmit functionWolfgang Grandegger
The start_xmit function of the MSCAN Driver did return improperly if the CAN dlc check failed (skb not freed and invalid return code). This patch adds a proper check of the frame lenght and data size and returns now correctly. The invalid skb packets are dropped silently as suggested by David Miller in the thread "[RFC] ndo_validate_skb: Let the netdev check a valid skb content" on the netdev mailing list. Furthermore, a typo has been fixed. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08ep93xx_eth.c general cleanupH Hartley Sweeten
General cleanup of the ep93xx_eth driver. 1) Use pr_fmt() to prefix the module name and __func__ to the error messages. 2) <linux/io.h> instead of <asm/io.h> 3) <mach/hardware.h> instead of <mach/ep93xx-regs.h> and <mach/platform.h> 4) Move the ep93xx_mdio_read (and ep93xx_mdio_write) function to eliminate the function prototype. 5) Change all the printk(<level> messages to pr_<level> and remove the __func__ argument. 6) Use platform_get_{resource/irq} to get the platform resources and add an error check. 7) Use resource_size() for request_mem_region() and ioremap(). 8) Use %pM to print the MAC address at the end of the probe. 9) Use dev->dev_addr not data->dev_addr for the MAC argument because a random address could be used if the platform does not supply one. The message at the end of the probe is left as a printk since it displays cleaner without the function name that would be displayed with pr_info(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08bnx2: Flush the register writes which setup the MSI-X tableBenjamin Li
The MSI-X table size needs to be properly set before pci_enable_msix() is called. But on certain machines, the writes are delayed and the MSI-X table size is incorrectly read. By reading the BNX2_PCI_MSIX_CONTROL register, the writes are flushed and now ensure that the MSI-X table is set correctly before MSI-X is enable on the device. This patch was originally diagnosed and authored by Kalyan Ram Chintalapati <kalyanc@vmware.com>. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Kalyan Ram Chintalapati <kalyanc@vmware.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: fix and commonize code for setting the receive address registersBruce Allan
Fix e1000e_rar_set() to flush consecutive register writes to avoid write combining which some parts cannot handle. Update e1000e_init_rx_addrs() to call the fixed e1000e_rar_set() instead of duplicating code. Also change e1000e_rar_set() to _not_ set the Address Valid bit if the MAC address is all zeros. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: e1000e_enable_tx_pkt_filtering() returns wrong valueBruce Allan
e1000e_enable_tx_pkt_filtering() will return a non-zero value if the driver fails to enable the manageability interface on the host for any reason; instead it should retun zero to indicate filtering has been disabled. Also provide a single exit point for the function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: perform 10/100 adaptive IFS only on parts that support itBruce Allan
Adaptive IFS which involves writing to the Adaptive IFS Throttle register was being done for all devices supported by the driver even though it is not supported (i.e. the register doesn't even exist) on some devices. The feature is supported on 8257x/82583 and ICH/PCH based devices, but not on ESB2. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: don't accumulate PHY statistics on PHY read failureBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: call pci_save_state() after pci_restore_state()Bruce Allan
Due to a change in pci_restore_state()[1] which clears the saved_state flag, the driver should call pci_save_state() to set the flag once again to avoid issues with EEH (same fix that recently was submitted for ixgbe). [1] commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: update version to 4.0.72Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix set mac addrAmit Kumar Salecha
o If tx and rx resources are not available, during set mac request. Then this request wont be passed to firmware and it will be added to driver mac list and will never make it to firmware. So if resources are not available, don't add it to driver mac list. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix smatch warningAmit Kumar Salecha
o Fix pointless assignments Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix tx ring memory leakAmit Kumar Salecha
o While unloading driver or resetting the context, tx ring was not getting free. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08be2net: implements ethtool function to read eeprom data.Sarveshwar Bandi
The patch implements a firmware command to fetch the eeprom data. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07TI DaVinci EMAC: Handle emac module clock correctly.Sriram
In the driver probe function the emac module clock needs to be enabled before calling register_netdev(). As soon as the device is registered the driver get_stats function can be invoked by the core - the module clock must be switched on to be able to read from stats registers. Also explicitly call matching clk_disable for failure conditions in probe function. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chipsBen Hutchings
The Davicom DM9100 and DM9102 chips are used on the motherboards of some SPARC systems (supported by the tulip driver) and also in PCI expansion cards (supported by the dmfe driver). There is no difference in the PCI device ids for the two different configurations, so these drivers both claim the device ids. However, it is possible to distinguish the two configurations by the presence of Open Firmware properties for them, so we do that. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07ixgbe: Fix compiler warning about variable being used uninitializedPJ Waskiewicz
tc is still throwing a warning that is could be used uninitialized. This fixes it, and properly formats the device ID checks for the use of this variable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: update the driver's module versionGiuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: improve Kconfig helpGiuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: include netdevice.h into the common.h headerGiuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: rename the gmac as dwmac1000 and split core and dma partsGiuseppe CAVALLARO
Use dwmac1000 naming instead of gmac. The patch also splits the gmac.c file in two new ones: dwmac1000_core.c and dwmac1000_dma.c. This could actually help on some architectures where different DMA engines are used. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: rename mac100 as dwmac100 and fix spare coding styleGiuseppe CAVALLARO
This patch renames the mac100.[ch] as dwmac100.[ch]; this looks more specific and appropriate for these chip series. The patch also fixes some spare coding style issues. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: move the dma out from the mainGiuseppe CAVALLARO
This patch moves the dma related functions (interrupt, start, stop etc.) out from the main driver code. This will help to support new DMA engines. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: reorganise class operations.Giuseppe CAVALLARO
This patch reorganises the internal stmmac ops structure. The stmmac_ops has been splitted into other three structures named: stmmac_ops stmmac_dma_ops stmmac_desc_ops This makes the code more clear and also helps the next work to make the driver more generic. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: do not call fix_mac_speed if NULLGiuseppe CAVALLARO
On some platforms, fix_mac_speed is used for configuring some sysconf registers according to the working speed. This patch fixes the fix_mac_speed invocation that cannot be done if it is a NULL pointer. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07stmmac: perform hw bus configurationGiuseppe CAVALLARO
On some platforms it can be required a different configuration of the bus. This can be done by invoking the bus_setup. It is defined for all the platforms that needs this kind of configuration. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-20 08:20:40 +0000