summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-28rt2x00: Detect initial rfkill state on registerIvo van Doorn
When registering rfkill, make sure a initial poll event is directly executed to detect the initial rfkill state and send the event to the rfkill layer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Input-polldev requires input deviceIvo van Doorn
input-polldev requires a correctly allocated and initialized input device to be set for the input_polled_dev->input field. Failure to do that will prevent correct polling of the device. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Split rt61/rt73 antenna selection into RX and TX antennaIvo van Doorn
Based on investigation of the legacy drivers, I have made the following assumptions of the antenna setup: - R77 is the TX antenna configuration - RF2529 fetches default antenna selection from NIC eeprom word With these assumptions we can change the antenna configuration to correctly read both antenna setup values and correctly configure the antenna. And we can now also configure the antenna for RF2529 without a double antenna. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Disable RX when switching antennaIvo van Doorn
Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Release rt2x00 2.0.11Ivo van Doorn
Version bump. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Fix antenna selection.Mattias Nissler
In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Cleanup if-statementsIvo van Doorn
Cleanup if-statements for simple 1/0 register field values. This also fixes a endian bug in rt2500usb when working with the PHY_CSR2 initialization. As well as a bug in the enabling of the LED in rt73usb. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Implement SW diversityIvo van Doorn
When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Remove rt2x00_clear_linkIvo van Doorn
rt2x00_clear_link() was becoming too large for statically inline, also it was used on a single location and shouldn't really be used anywhere else. So move the entire code into the function rt2x00lib_start_link_tuner() Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: SW diversity should default to antenna BIvo van Doorn
Although ANTENNA_SW_DIVERSITY should never be send to the driver, we should still handle it to prevent bugs. But instead of defaulting to ANTENNA_HW_DIVERSITY we should default to ANTENNA_B instead. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00Ivo van Doorn
mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Use enum definesIvo van Doorn
When setting the default EEPROM values use the values from the enums instead of "magic" values. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Move quality statistics into seperate structureIvo van Doorn
Move all link quality statistics variables into the link_qual structure. This cleans up the link structure and allows us to use it for more then just statistics. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inet_(dev_)add_type.Eric W. Biederman
The patch extends the inet_addr_type and inet_dev_addr_type with the network namespace pointer. That allows to access the different tables relatively to the network namespace. The modification of the signature function is reported in all the callers of the inet_addr_type using the pointer to the well known init_net. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: Cleanup struct cn_callback_entryLi Zefan
- 'cb' is a fake struct member. In a previous patch struct cn_callback was renamed to cn_callback_id, so 'cb' should have been deleted at that time. - 'nls' isn't used and is redundant, we can retrieve this data through cn_callback_entry.pdev->nls. - 'seq' and 'group' should be u32, as they are declared to be u32 in other places. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: Cleanup struct cn_queue_devLi Zefan
Struct member netlink_groups is never used, and I don't see how it can be useful. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: clean up {,__}cn_rx_skb()Li Zefan
- __cn_rx_skb() does nothing but calls cn_call_callback(), it doesn't check skb and msg sizes as the comment suggests, but cn_rx_skb() checks those sizes. - In cn_rx_skb() Local variable 'len' is not used. 'len' is probably intended to be passed to skb_pull(), but here skb_pull() is not needed, instead skb_free() is called. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: add a missing break in cn_netlink_send()Li Zefan
Each entry in the list has a unique id, so just break out of the loop if the matched id is found. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[SHAPER]: The scheduled shaper removal.Adrian Bunk
This patch contains the scheduled removal of the shaper driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ATM]: [he] fixing compilation when you define USE_RBPS_POOL/USE_RBPL_POOLJorge Boncompte
Signed-off-by: Jorge Boncompte <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ATM]: [ambassador] kmalloc + memset conversion to kzallocJoonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ATM]: [he] This patch removes the ancient version string.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[LIBERTAS]: Remove last stray user of MAC_FMT.David S. Miller
Reported by Denis V. Lunev Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ETH]: Combine format_addr() with print_mac().Michael Chan
print_mac() used many most net drivers and format_addr() used by net-sysfs.c are very similar and they can be intergrated. format_addr() is also identically redefined in the qla4xxx iscsi driver. Export a new function sysfs_format_mac() to be used by net-sysfs, qla4xxx and others in the future. Both print_mac() and sysfs_format_mac() call _format_mac_addr() to do the formatting. Changed print_mac() to use unsigned char * to be consistent with net_device struct's dev_addr. Added buffer length overrun checking as suggested by Joe Perches. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Update version to 3.87Matt Carlson
This patch updates the version number to 3.87. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Fix supporting flowctrl codeMatt Carlson
This patch does three things. It modifies tg3_setup_flow_control() to use the administrator requested flow control settings if autonegotiation is turned off. It slightly modifies the tg3_setup_fiber_mii_phy() function to account for this new use case. And finally, it does the same for tg3_setup_copper_phy(). The copper modifications are more than a small multi-line change. The new code makes an attempt to avoid a link renegotiation if the link is active at half duplex and the only difference between the current advertised settings and requested advertised settings is the flow control advertisements. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Correct sw autoneg flow control advertisementsMatt Carlson
This patch modifies the software autoneg code to use the administrator specified flow control parameters. Since the autonegotiation code uses alternative flow control enumerations, the 1000-BaseX utility functions are used and code was added to convert the definitions to and from the alternate enumerations. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Correct 5704S flowctrl advertisementsMatt Carlson
This patch modifies the 5704S hardware autoneg code to use the administrator specified flow control parameters. Since the 5704S uses device specific flow control enumerations, the 1000-BaseX utility functions are used and code was added to convert the definitions to and from the proprietary enumerations. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Replace some magic 5704S constantsMatt Carlson
This patch replaces magic values with preprocessor definitions for the sg_dig_ctrl and sg_dig_status registers. This is preparatory work for the next patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Add 1000T & 1000X flowctl adv helpersMatt Carlson
This patch adds two functions designed to convert abstract TX & RX flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation advertisements. Code that uses standard definitions which statically advertises TX & RX flow control has been replaced with code that configures the advertisements based on administrator dictated preferences. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Add 1000T & 1000X flowctrl resolversMatt Carlson
This patch adds two new utility functions to resolve flow control. One function resolves flow control based on 1000-BaseT register definitions. The other resolves flow control based on 1000-Base X register definitions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Separate requested and actual flow control parametersMatt Carlson
This patch removes the TX and RX flow control flags from tg3_flags and adds two new flow control variables, flowctrl and active_flowctrl. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28mac80211: clean up rate selectionMattias Nissler
Move some code out of rc80211_simple since it's probably needed for all rate selection algorithms, and fix iwlwifi accordingly. While at it, clean up the rate_control_get_rate() interface. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NIU]: Use print_macJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TG3]: Use print_macJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[SUNVNET]: Use print_macJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28wireless: make drivers include the TSF RX flag where appropriateJohannes Berg
These drivers pass full mactime information to the stack, make them indicate this via the new RX_FLAG_TSFT to get mac80211 to show this information in monitor mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28introduce WEXT scan capabilitiesDan Williams
Introduce scan capabilities to WEXT so that userspace can do intelligent things with scan behavior such as handling hidden SSIDs more gracefully. If the driver reports a specific scan capability, the driver must respect the options specified in the iw_scan_req structure when handling the SIOCSIWSCAN call, unless it's mode or state does not allow it to do so, in which case it must return an error. This version switches to Dave Kilroy's suggestion of claiming unused padding space for the scan_capa field. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PARISC]: Fix build after ipv4_is_*() changes.Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4] drivers/infiniband: Use ipv4_is_<type>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PPP] synchronous tty: convert dead_sem to completionMatthias Kaehlcke
PPP synchronous tty channel driver: convert the semaphore dead_sem to a completion Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix compiler warning.Michael Chan
Change bnx2_init_napi() to void. Warning was noted by DaveM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Update version to 1.7.1.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Enable new tx ring.Michael Chan
Enable new tx ring and add new MSIX handler and NAPI poll function for the new tx ring. Enable MSIX when the hardware supports it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add support for a new tx ring.Michael Chan
To separate TX IRQs into a different MSIX vector, we need to support a new tx ring. The original tx ring will still be used when not using MSIX. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Support multiple MSIX IRQs.Michael Chan
Change bnx2_napi struct into an array and add code to manage multiple IRQs. MSIX hardware structures and new registers are also added. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Move rx indexes into bnx2_napi struct.Michael Chan
Rx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Move tx indexes into bnx2_napi struct.Michael Chan
Tx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Introduce new bnx2_napi structure.Michael Chan
Introduce a bnx2_napi structure that will hold a napi_struct and other fields to handle NAPI polling for the napi_struct. Various tx and rx indexes and status block pointers will be moved from the main bnx2 structure to this bnx2_napi structure. Most NAPI path functions are modified to be passed this bnx2_napi struct pointer. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Restructure IRQ datastructures.Michael Chan
Add a table to keep track of multiple IRQs and restructure the IRQ request and free functions so that they can be easily expanded to handle multiple IRQs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 05:34:54 +0000