summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-08-23ENGR00274247: touch: add egalax touch driver support on i.MX6Q/DL AUTO/SDLuwei
Copy the egalax touch screen driver from linux3.5.7.Make some modification.Remove the __devinit __devexit __devexit_p out of the file, because 3.10 does not support. Signed-off-by: Luwei Zhou <b45643@freescale.com>
2013-08-23ENGR00274056-4 mxc: gpu-viv: add gpu freq throttleAnson Huang
add gpu freq throttle to protect SOC, when temperature is too high, lower gpu freq to 4/64, and gpu freq will restore when SOC cool down. Acked-by: Jason Liu Signed-off-by: Anson Huang <b20788@freescale.com>
2013-08-23ENGR00274056-3 thermal: imx: binding device cooling to thermalAnson Huang
1. imx thermal depends on device cooling config, as only cpu cooling is not enough for cooling down SOC; 2. binding device cooling to imx thermal driver. 3. add temperature buffer for passive trip, which means when temperature cross passive trip, cooling devices will be triggered, but only when temperature drop to more than the number we defined(10 C) lower than passive trip, cooling devices will be canceled. this is to avoid triggering/canceling cooling device back and forth when temperature is around passive trip. Signed-off-by: Anson Huang <b20788@freescale.com>
2013-08-23ENGR00274056-1 thermal: add device cooling for thermal driverAnson Huang
cpu cooling is not enough when temperature is too hot, as some devices may contribute a lot of heat to SOC, such as GPU, so we need to add device cooling as well, when system is too hot, devices can also take their actions to lower SOC temperature. when temperature cross the passive trip, device cooling driver will send out notification, those devices who register this devfreq_cooling notification will take actions to lower SOC temperature. Signed-off-by: Anson Huang <b20788@freescale.com>
2013-08-23ENGR00274286-2 mxc: asrc: Add asrc m2m driverNicolin Chen
Add ASRC M2M driver. Signed-off-by: Nicolin Chen <b42378@freescale.com>
2013-08-23ENGR00274286-1 dma: imx-sdma: Use correct sdma script for asrcNicolin Chen
Use correct sdma script for ASRC. Signed-off-by: Nicolin Chen <b42378@freescale.com>
2013-08-23ENGR00273974-1 media: port mxc vout driver from 3.5.7 to 3.10Liu Ying
This is porting mxc vout driver from imx_3.5.7 kernel to imx_3.10 kernel. * Put the driver in drivers/media/platform/ directory instead of drivers/media/video/ directory, since the later one is renamed to the former one in 3.10 kernel. * Change the ipu-v3.h header file from <mach/ipu-v3.h> to <linux/ipu-v3.h>. * Change the mxc_vidioc_s_crop() function's implementation since the definition of the vidioc_s_crop() function is modified to make the last argument be constant. * Set vfl_dir to be VFL_DIR_TX since the ioctrl validity checks are improved in 3.10 kernel. * Remove 'defaut y' setting for VIDEO_MXC_OUTPUT and VIDEO_MXC_IPU_OUTPUT Kconfigs. They may be configured by kernel default configure or by user. * Make VIDEO_MXC_OUTPUT Kconfig depend on FB_MXC Kconfig since we need framebuffers to be rendered. * Make VIDEO_MXC_IPU_OUTPUT Kconfig be tristate. * Split <linux/mxc_v4l2.h> header file up into include/linux/ and include/uapi/linux/ directories so that the userspace may include the mxc_v4l2.h header file. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2013-08-23net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without linkUwe Kleine-König
Don't test for having link and let hardware deal with this situation. Without this patch I see a machine running an -rt patched Linux being stuck in sch_direct_xmit when it looses link while there is still a packet to be sent. In this case the fec_enet_start_xmit routine returned NETDEV_TX_BUSY which makes the network stack reschedule the packet and so sch_direct_xmit calls fec_enet_start_xmit again. I failed to reproduce a complete hang without -rt, but I think the problem exists there, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: workaround stop tx during errata ERR006358Frank Li
If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously detected as not set during a prior frame transmission, then the ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in frames not being transmitted until there is a 0-to-1 transition on ENET_TDAR[TDAR]. Workarounds: code can use the transmit frame interrupt flag (ENET_EIR[TXF]) as a method to detect whether the ENET has completed transmission and the ENET_TDAR[TDAR] has been cleared. If ENET_TDAR[TDAR] is detected as cleared when packets are queued and waiting for transmit, then a write to the TDAR bit will restart TxBD processing. This case main happen when loading is light. A ethernet package may not send out utile next package put into tx queue. How to test: while [ true ] do ping <IP> -s 10000 -w 4 ping <IP> -s 6000 -w 2 ping <IP> -s 4000 -w 2 ping <IP> -s 10000 -w 2 done You will see below result in overnight test. 6008 bytes from 10.192.242.116: seq=1 ttl=128 time=0.722 ms 4008 bytes from 10.192.242.116: seq=0 ttl=128 time=1001.008 ms 4008 bytes from 10.192.242.116: seq=1 ttl=128 time=1.010 ms 10008 bytes from 10.192.242.116: seq=0 ttl=128 time=0.896 ms After apply this patch, >1000ms delay disappear. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Add MODULE_ALIASFabio Estevam
Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: Add VLAN receive HW support.Jim Baxter
This enables the driver to take advantage of the FEC VLAN indicator to improve performance. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: Fix RMON registers on imx6Jim Baxter
commit 38ae92d "fec: Add support for reading RMON registers" causes the imx6Q to crash. This fixes it by only enabling the RMON registers, the registers are already cleared by the MAC being reset. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: Fix Transmitted bytes counterJim Baxter
The tx_bytes field was not being updated so the network card statistics showed 0.0B transmitted. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: Fix multicast list setup in fec_restart().Christoph Müllner
Setup the multicast list of the net_device instead of clearing it blindly. This restores the multicast groups in case of a link down/up event or when resuming from suspend. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Add support for reading RMON registersChris Healy
Add ethtool operation to read RMON registers. Tested against net-next on i.MX28. v2: make conditional on #ifndef CONFIG_M5272 Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Add support to restart autonegotiateChris Healy
Add ethtool operation to restart autonegotiation via the PHY. Tested on i.MX28EVK. Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: fec: Convert to use devm_ioremap_resourceTushar Behera
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: netdev@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Only pass pdev in fec_ptp_init()Fabio Estevam
Passing pdev in fec_ptp_init() is enough, since we can get ndev locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Handle the regulator in suspend/resumeFabio Estevam
In order to save power, let's disable the regulator in the suspend function and enable it in resume. Tested on a mx28evk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Remove irqs firstFabio Estevam
During probe the clocks are enabled prior than the acquiring the interrupts. In the remove function we need to do the opposite: first remove the interrupts and then disable the clocks. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Disable the PHY regulator on error and removalFabio Estevam
In the case of error during probe, disable the PHY regulator. Do the same in fec_drv_remove(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Invert the order of error path sequenceFabio Estevam
Currently when fec_enet_init fails it jumps to 'failed_init' error path, which will attemp to free the interrupts. This is wrong because at this point the interrupts have not even been acquired. Swap failed_init/failed_irq to fix the error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Place the phy regulator in the private structureFabio Estevam
Instead of using a local reg_phy structure, let's put it inside the private structure, so that we are able to have access to the regulator structure even when we are outside fec_probe(). This is in preparation for controlling the FEC PHY regulator in the suspend and resume functions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Use DIV_ROUND_UP macroFabio Estevam
Use the standard DIV_ROUND_UP macro in order to provide better readability. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23fec: Let device core handle pinctrlFabio Estevam
Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23regulator: pfuze100: Fix off-by-one for max_register settingAxel Lin
max_register should be register count - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: Simplify pfuze100_set_ramp_delay implementationAxel Lin
Simplify the equation to calculate ramp_delay. Below equations are equivalent: ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 50000 / (4 * ramp_delay); ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 12500 / ramp_delay; So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different equations. Also use rdev->desc->vsel_reg instead of run-time calculate register address. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with high bit setAxel Lin
Current code adjust min_uV and uV_step but missed adjusting the n_voltages setting. When BIT6 is clear: n_voltages = (1975000 - 400000) / 25000 + 1 = 64 When BIT6 is set: n_voltages = (3300000 - 800000) / 50000 + 1 = 51 The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved. When using regulator_list_voltage_linear, the n_voltages does matter here because wrong n_voltages setting make the equation return wrong result. e.g. if selector is 63, regulator_list_voltage_linear returns 800000 + (50000 * 63) = 4000000 It should return -EINVAL if the selector is in the range of 51 ~ 63. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: Use regulator_map_voltage_ascendAxel Lin
All table based voltage list have ascendant order. Use regulator_map_voltage_ascend for them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: Fix module alias prefixAxel Lin
i2c drivers use "i2c:" prefix for module alias. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: Use i2c_[set|get]_clientdataAxel Lin
Since this is a i2c driver, use i2c_[set|get]_clientdata instead of dev_[set|get]_drvdata. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: REGULATOR_PFUZE100 needs to select REGMAP_I2CAxel Lin
This fixes below build errors: CC [M] drivers/regulator/pfuze100-regulator.o drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe': drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driverRobin Gong
Fix building error on x86_64 and i386: WARNING: modpost: missing MODULE_LICENSE() in drivers/regulator/pfuze100-regulator.o Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator:pfuze100: fix build warning and correct the binding docRobin Gong
fix building warning and correct the binding doc Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23regulator: pfuze100: add pfuze100 regulator driverRobin Gong
Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23ENGR00273848-02 iMX6Q/DL HDMI: Enable HDMI functionSandor Yu
Add MX6Q/DL HDMI core and video driver source code. Add MXC edid data read and parse source code. Signed-off-by: Sandor Yu <R01008@freescale.com>
2013-08-23ENGR00273500 IPUv3 dev: use wait_event_interruptible for ipu taskLiu Ying
The ipu task thread checks outstanding tasks to be done on waiting event uninterruptibly on the function find_task()'s return value. However, sleeping on waiting event uninterruptibly contributes to system load average value. This patch changes wait_event() to wait_event_interruptible() to avoid the load average value inflation. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit ec9479ffc757eaefa9b8d4942c37e3634e15599c)
2013-08-23usb: chipidea: fix the build error with randconfigPeter Chen
Using below configs, the compile will have error: ERROR: "ehci_init_driver" undefined! .config: CONFIG_USB_CHIPIDEA=m CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_CHIPIDEA_DEBUG=y The reason is chipidea host uses symbol from ehci, but ehci is not compiled. Let the chipidea host depend on ehci even it is built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23chipidea: ci_hdrc_imx: Remove unused variable 'res'Fabio Estevam
'res' is not used anywhere, so let's get rid of it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2013-08-23usb: chipidea: ci_hdrc_imx: access phy via private dataFabio Estevam
commit ea1418b5f1a (usb: chipidea: i.MX: use devm_usb_get_phy_by_phandle to get phy) causes the USB host to miss the disconnect/connect events. In order to reproduce this problem: - Insert a USB thumb into the USB host port (connection is detected) - Remove it (no disconnect event will be reported) - Insert the USB thumb again (connection is not detected) Fix this problem by accessing the usb_phy structure using the private data instead of accessing a local structure. Tested on a mx28evk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: drop "13xxx" infixAlexander Shishkin
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usbmisc_imx: allow autoloading on according to dt idsArnaud Patard (Rtp)
Allow udev to autoload the module when booting with device-tree Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: get rid of camelcase namesAlexander Shishkin
Since someone has added camelcase detection to checkpatch.pl, chipidea udc patches have been very noisy. To make everybody's life easier, this patch changes camelcase names into something more appropriate to the coding style. No functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: move to pcim_* functionsAndy Shevchenko
This patch makes error path cleaner and probe function tidier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: remove superfluous pci_set_drvdata(pci, NULL)Andy Shevchenko
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: i.MX: use devm_usb_get_phy_by_phandle to get phySascha Hauer
This patch converts the driver to use devm_usb_get_phy_by_phandle which makes the code smaller and a bit simpler. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: usbmisc: use module_platform_driverPhilipp Zabel
This patch converts the driver to use the module_platform_driver macro which makes the code smaller and a bit simpler. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: chipidea: ci13xxx-imx: move static pdata into probe functionMichael Grzeschik
The pdata structure gets copied anyway inside ci13xxx_add_device by platform_device_add. We don't need to have it static. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23usb: add devicetree helpers for determining dr_mode and phy_typeMichael Grzeschik
This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from the devicetree. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 12:08:41 +0000