summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-03-28Merge tag 'v4.4.177' into toradex_vf_4.4-nextColibri-VF_LXDE-Image_2.8b6.183-20190331Marcel Ziswiler
This is the 4.4.177 stable release
2019-03-23drm/radeon/evergreen_cs: fix missing break in switch statementGustavo A. R. Silva
commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23media: uvcvideo: Avoid NULL pointer dereference at the end of streamingSakari Ailus
commit 9dd0627d8d62a7ddb001a75f63942d92b5336561 upstream. The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1cc48 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PM / wakeup: Rework wakeup source timer cancellationViresh Kumar
commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream. If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23md: Fix failed allocation of md_register_threadAditya Pakki
commit e406f12dde1a8375d77ea02d91f313fb1a9c6aec upstream. mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 ↵Jay Dolan
chip use the pci_pericom_setup() commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream. The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23serial: 8250_pci: Fix number of ports for ACCES serial cardsJay Dolan
commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream. Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23i2c: tegra: fix maximum transfer sizeSowjanya Komatineni
commit f4e3f4ae1d9c9330de355f432b69952e8cef650c upstream. Tegra186 and prior supports maximum 4K bytes per packet transfer including 12 bytes of packet header. This patch fixes max write length limit to account packet header size for transfers. Cc: stable@vger.kernel.org # 4.4+ Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23parport_pc: fix find_superio io compare code, should use equal test.QiaoChong
commit 21698fd57984cd28207d841dbdaa026d6061bceb upstream. In the original code before 181bf1e815a2 the loop was continuing until it finds the first matching superios[i].io and p->base. But after 181bf1e815a2 the logic changed and the loop now returns the pointer to the first mismatched array element which is then used in get_superio_dma() and get_superio_irq() and thus returning the wrong value. Fix the condition so that it now returns the correct pointer. Fixes: 181bf1e815a2 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: QiaoChong <qiaochong@loongson.cn> [rewrite the commit message] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23intel_th: Don't reference unassigned outputsAlexander Shishkin
commit 9ed3f22223c33347ed963e7c7019cf2956dd4e37 upstream. When an output port driver is removed, also remove references to it from any masters. Failing to do this causes a NULL ptr dereference when configuring another output port: > BUG: unable to handle kernel NULL pointer dereference at 000000000000000d > RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth] > Call Trace: > dev_attr_store+0x1b/0x30 > sysfs_kf_write+0x3c/0x50 > kernfs_fop_write+0x125/0x1a0 > __vfs_write+0x3a/0x190 > ? __vfs_write+0x5/0x190 > ? _cond_resched+0x1a/0x50 > ? rcu_all_qs+0x5/0xb0 > ? __vfs_write+0x5/0x190 > vfs_write+0xb8/0x1b0 > ksys_write+0x55/0xc0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x5a/0x140 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: b27a6a3f97b9 ("intel_th: Add Global Trace Hub driver") CC: stable@vger.kernel.org # v4.4+ Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23dmaengine: usb-dmac: Make DMAC system sleep callbacks explicitPhuong Nguyen
commit d9140a0da4a230a03426d175145989667758aa6a upstream. This commit fixes the issue that USB-DMAC hangs silently after system resumes on R-Car Gen3 hence renesas_usbhs will not work correctly when using USB-DMAC for bulk transfer e.g. ethernet or serial gadgets. The issue can be reproduced by these steps: 1. modprobe g_serial 2. Suspend and resume system. 3. connect a usb cable to host side 4. Transfer data from Host to Target 5. cat /dev/ttyGS0 (Target side) 6. echo "test" > /dev/ttyACM0 (Host side) The 'cat' will not result anything. However, system still can work normally. Currently, USB-DMAC driver does not have system sleep callbacks hence this driver relies on the PM core to force runtime suspend/resume to suspend and reinitialize USB-DMAC during system resume. After the commit 17218e0092f8 ("PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"), PM core will not force runtime suspend/resume anymore so this issue happens. To solve this, make system suspend resume explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks. SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC suspended after and initialized before renesas_usbhs." Signed-off-by: Phuong Nguyen <phuong.nguyen.xw@renesas.com> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ [shimoda: revise the commit log and add Cc tag] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clk: ingenic: Fix round_rate misbehaving with non-integer dividersPaul Cercueil
commit bc5d922c93491878c44c9216e9d227c7eeb81d7f upstream. Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23cpufreq: pxa2xx: remove incorrect __init annotationArnd Bergmann
commit 9505b98ccddc454008ca7efff90044e3e857c827 upstream. pxa_cpufreq_init_voltages() is marked __init but usually inlined into the non-__init pxa_cpufreq_init() function. When building with clang, it can stay as a standalone function in a discarded section, and produce this warning: WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages() The function pxa_cpufreq_init() references the function __init pxa_cpufreq_init_voltages(). This is often because pxa_cpufreq_init lacks a __init annotation or the annotation of pxa_cpufreq_init_voltages is wrong. Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23cpufreq: tegra124: add missing of_node_put()Yangtao Li
commit 446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream. of_cpu_device_node_get() will increase the refcount of device_node, it is necessary to call of_node_put() at the end to release the refcount. Fixes: 9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlockBart Van Assche
commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream. When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); <Interrupt> lock(&(&cmd->t_state_lock)->rlock);
2019-03-23scsi: virtio_scsi: don't send sc payload with tmfsFelipe Franciosi
commit 3722e6a52174d7c3a00e6f5efd006ca093f346c1 upstream. The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of device-readable records and a single device-writable response entry: struct virtio_scsi_ctrl_tmf { // Device-readable part le32 type; le32 subtype; u8 lun[8]; le64 id; // Device-writable part u8 response; } The above should be organised as two descriptor entries (or potentially more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64 id" or after "u8 response". The Linux driver doesn't respect that, with virtscsi_abort() and virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It results in the original scsi command payload (or writable buffers) added to the tmf. This fixes the problem by leaving cmd->sc zeroed out, which makes virtscsi_kick_cmd() add the tmf to the control vq without any payload. Cc: stable@vger.kernel.org Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23s390/virtio: handle find on invalid queue gracefullyHalil Pasic
commit 3438b2c039b4bf26881786a1f3450f016d66ad11 upstream. A queue with a capacity of zero is clearly not a valid virtio queue. Some emulators report zero queue size if queried with an invalid queue index. Instead of crashing in this case let us just return -ENOENT. To make that work properly, let us fix the notifier cleanup logic as well. Cc: stable@vger.kernel.org Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clocksource/drivers/exynos_mct: Clear timer interrupt when shutdownStuart Menefy
commit d2f276c8d3c224d5b493c42b6cf006ae4e64fb1c upstream. When shutting down the timer, ensure that after we have stopped the timer any pending interrupts are cleared. This fixes a problem when suspending, as interrupts are disabled before the timer is stopped, so the timer interrupt may still be asserted, preventing the system entering a low power state when the wfi is executed. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISRStuart Menefy
commit a5719a40aef956ba704f2aa1c7b977224d60fa96 upstream. When a timer tick occurs and the clock is in one-shot mode, the timer needs to be stopped to prevent it triggering subsequent interrupts. Currently this code is in exynos4_mct_tick_clear(), but as it is only needed when an ISR occurs move it into exynos4_mct_tick_isr(), leaving exynos4_mct_tick_clear() just doing what its name suggests it should. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23regulator: s2mpa01: Fix step values for some LDOsStuart Menefy
commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream. The step values for some of the LDOs appears to be incorrect, resulting in incorrect voltages (or at least, ones which are different from the Samsung 3.4 vendor kernel). Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23regulator: s2mps11: Fix steps for buck7, buck8 and LDO35Krzysztof Kozlowski
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream. LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420 Arndale Octa board). Cc: <stable@vger.kernel.org> Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23ACPI / device_sysfs: Avoid OF modalias creation for removed deviceAndy Shevchenko
commit f16eb8a4b096514ac06fb25bf599dcc792899b3d upstream. If SSDT overlay is loaded via ConfigFS and then unloaded the device, we would like to have OF modalias for, already gone. Thus, acpi_get_name() returns no allocated buffer for such case and kernel crashes afterwards: ACPI: Host-directed Dynamic ACPI Table Unload ads7950 spi-PRP0001:00: Dropping the link to regulator.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:create_of_modalias.isra.1+0x4c/0x150 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0 Call Trace: __acpi_device_uevent_modalias+0xb0/0x100 spi_uevent+0xd/0x40 ... In order to fix above let create_of_modalias() check the status returned by acpi_get_name() and bail out in case of failure. Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381 Reported-by: Ferry Toth <fntoth@gmail.com> Tested-by: Ferry Toth<fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23stm class: Prevent division by zeroAlexander Shishkin
commit bf7cbaae0831252b416f375ca9b1027ecd4642dd upstream. Using STP_POLICY_ID_SET ioctl command with dummy_stm device, or any STM device that supplies zero mmio channel size, will trigger a division by zero bug in the kernel. Prevent this by disallowing channel widths other than 1 for such devices. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23net: set static variable an initial value in atl2_probe()Mao Wenan
[ Upstream commit 4593403fa516a5a4cffe6883c5062d60932cbfbe ] cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23mac80211_hwsim: propagate genlmsg_reply return codeLi RongQing
[ Upstream commit 17407715240456448e4989bee46ffc93991add83 ] genlmsg_reply can fail, so propagate its return code Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()Alexey Khoroshilov
[ Upstream commit e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ] If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe() leaves clk enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pinsMartin Blumenstingl
[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ] Fix the mismatch between the "sdxc_d13_1_a" pin group definition from meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a"). This makes it possible to use "sdxc_d13_1_a" in device-tree files to route the MMC data 1..3 pins to GPIOX_1..3. Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23net: systemport: Fix reception of BPDUsFlorian Fainelli
[ Upstream commit a40061ea2e39494104602b3048751341bda374a1 ] SYSTEMPORT has its RXCHK parser block that attempts to validate the packet structures, unfortunately setting the L2 header check bit will cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type. Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_taskAnoob Soman
[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ] When a target sends Check Condition, whilst initiator is busy xmiting re-queued data, could lead to race between iscsi_complete_task() and iscsi_xmit_task() and eventually crashing with the following kernel backtrace. [3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 [3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0 [3326150.987582] WARN: Oops: 0002 [#1] SMP [3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin [3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1 [3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016 [3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi] [3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000 [3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246 [3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480 [3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20 [3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008 [3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000 [3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08 [3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000 [3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660 [3326150.987918] WARN: Stack: [3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18 [3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00 [3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400 [3326150.987964] WARN: Call Trace: [3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi] [3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0 [3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470 [3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870 [3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300 [3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0 [3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70 [3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.988138] WARN: RSP <ffff8801f545bdb0> [3326150.988144] WARN: CR2: 0000000000000078 [3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]--- Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix list corruption regression") introduced "taskqueuelock" to fix list corruption during the race, but this wasn't enough. Re-setting of conn->task to NULL, could race with iscsi_xmit_task(). iscsi_complete_task() { .... if (conn->task == task) conn->task = NULL; } conn->task in iscsi_xmit_task() could be NULL and so will be task. __iscsi_get_task(task) will crash (NullPtr de-ref), trying to access refcount. iscsi_xmit_task() { struct iscsi_task *task = conn->task; __iscsi_get_task(task); } This commit will take extra conn->session->back_lock in iscsi_xmit_task() to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race, iscsi_xmit_task() increments task->refcount (__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task(). Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23Input: st-keyscan - fix potential zalloc NULL dereferenceGabriel Fernandez
[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ] This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23i2c: cadence: Fix the hold bit settingShubhrajyoti Datta
[ Upstream commit d358def706880defa4c9e87381c5bf086a97d5f9 ] In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed. Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Reported-by: Kyle Roeschley <kyle.roeschley@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23Input: matrix_keypad - use flush_delayed_work()Dmitry Torokhov
[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23s390/dasd: fix using offset into zero size array errorStefan Haberland
[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ] Dan Carpenter reported the following: The patch 52898025cf7d: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23gpu: ipu-v3: Fix CSI offsets for imx53Steve Longerbeam
[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23gpu: ipu-v3: Fix i.MX51 CSI control registers offsetAlexander Shiyan
[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23crypto: caam - fixed handling of sg listPankaj Gupta
commit 42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream. when the source sg contains more than 1 fragment and destination sg contains 1 fragment, the caam driver mishandle the buffers to be sent to caam. Fixes: f2147b88b2b1 ("crypto: caam - Convert GCM to new AEAD interface") Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by: Arun Pathak <arun.pathak@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23stm class: Fix an endless loop in channel allocationZhi Jin
commit a1d75dad3a2c689e70a1c4e0214cca9de741d0aa upstream. There is a bug in the channel allocation logic that leads to an endless loop when looking for a contiguous range of channels in a range with a mixture of free and occupied channels. For example, opening three consequtive channels, closing the first two and requesting 4 channels in a row will trigger this soft lockup. The bug is that the search loop forgets to skip over the range once it detects that one channel in that range is occupied. Restore the original intent to the logic by fixing the omission. Signed-off-by: Zhi Jin <zhi.jin@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()Hans Verkuil
commit 5e99456c20f712dcc13d9f6ca4278937d5367355 upstream. Userspace shouldn't set bytesused to 0 for output buffers. vb2_warn_zero_bytesused() warns about this (only once!), but it also calls WARN_ON(1), which is confusing since it is not immediately clear that it warns about a 0 value for bytesused. Just drop the WARN_ON as it serves no purpose. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23It's wrong to add len to sector_nr in raid10 reshape twiceXiao Ni
commit b761dcf1217760a42f7897c31dcb649f59b2333e upstream. In reshape_request it already adds len to sector_nr already. It's wrong to add len to sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data corruption. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23vxlan: Fix GRO cells race condition between receive and link deleteStefano Brivio
[ Upstream commit ad6c9986bcb627c7c22b8f9e9a934becc27df87c ] If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df87997 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()Eric Dumazet
[ Upstream commit 59cbf56fcd98ba2a715b6e97c4e43f773f956393 ] Same reasons than the ones explained in commit 4179cb5a4c92 ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx() or gro_cells_receive() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro_cells infrastructure, as gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23ipvlan: disallow userns cap_net_admin to change global mode/flagsDaniel Borkmann
[ Upstream commit 7cc9f7003a969d359f608ebb701d42cafe75b84a ] When running Docker with userns isolation e.g. --userns-remap="default" and spawning up some containers with CAP_NET_ADMIN under this realm, I noticed that link changes on ipvlan slave device inside that container can affect all devices from this ipvlan group which are in other net namespaces where the container should have no permission to make changes to, such as the init netns, for example. This effectively allows to undo ipvlan private mode and switch globally to bridge mode where slaves can communicate directly without going through hostns, or it allows to switch between global operation mode (l2/l3/l3s) for everyone bound to the given ipvlan master device. libnetwork plugin here is creating an ipvlan master and ipvlan slave in hostns and a slave each that is moved into the container's netns upon creation event. * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] * Spawn container & change ipvlan mode setting inside of it: # docker run -dt --cap-add=NET_ADMIN --network cilium-net --name client -l app=test cilium/netperf 9fff485d69dcb5ce37c9e33ca20a11ccafc236d690105aadbfb77e4f4170879c # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever # docker exec -ti client ip link change link cilium0 name cilium0 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns (mode switched to l2): # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] Same l3 -> l2 switch would also happen by creating another slave inside the container's network namespace when specifying the existing cilium0 link to derive the actual (bond0) master: # docker exec -ti client ip link add link cilium0 name cilium1 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 2: cilium1@if4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] One way to mitigate it is to check CAP_NET_ADMIN permissions of the ipvlan master device's ns, and only then allow to change mode or flags for all devices bound to it. Above two cases are then disallowed after the patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23mdio_bus: Fix use-after-free on device_register failsYueHaibing
[ Upstream commit 6ff7b060535e87c2ae14dd8548512abfdda528fb ] KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23net/mlx4_core: Fix qp mtt size calculationJack Morgenstein
[ Upstream commit 8511a653e9250ef36b95803c375a7be0e2edb628 ] Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23net/mlx4_core: Fix reset flow when in command polling modeJack Morgenstein
[ Upstream commit e15ce4b8d11227007577e6dc1364d288b8874fbe ] As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa3506 ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23ravb: Decrease TxFIFO depth of Q3 and Q2 to oneMasaru Nagai
[ Upstream commit ae9819e339b451da7a86ab6fe38ecfcb6814e78a ] Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23pptp: dst_release sk_dst_cache in pptp_sock_destructXin Long
[ Upstream commit 9417d81f4f8adfe20a12dd1fadf73a618cbd945d ] sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect, so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct, otherwise, the dst refcnt will leak. It can be reproduced by this syz log: r1 = socket$pptp(0x18, 0x1, 0x2) bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e) connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e) Consecutive dmesg warnings will occur: unregister_netdevice: waiting for lo to become free. Usage count = 1 v1->v2: - use rcu_dereference_protected() instead of rcu_dereference_check(), as suggested by Eric. Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23Revert "x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls"Sasha Levin
This reverts commit 7212e37cbdf99f48e4a6c689a42f4bda1ae69001. Hedi Berriche <hedi.berriche@hpe.com> notes: > In 4.4-stable efi_runtime_lock as defined in drivers/firmware/efi/runtime-wrappers.c > is a spinlock (given it predates commit dce48e351c0d) and commit > > f331e766c4be x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls > > which 7212e37cbdf9 is a backport of, needs it to be a semaphore. Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23iscsi_ibft: Fix missing break in switch statementGustavo A. R. Silva
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream. Add missing break statement in order to prevent the code from falling through to case ISCSI_BOOT_TGT_NAME, which is unnecessary. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23Input: elan_i2c - add id for touchpad found in Lenovo s21e-20Vincent Batts
commit e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream. Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad. Signed-off-by: Vincent Batts <vbatts@hashbangbash.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 11:24:17 +0000