summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-09-17drm/nouveau: Bump version from 1.1.1 to 1.1.2Mario Kleiner
commit 7820e5eef0faa4a5e10834296680827f7ce78a89 upstream. Linux 3.16 fixed multiple bugs in kms pageflip completion events and timestamping, which were originally introduced in Linux 3.13. These fixes have been backported to all stable kernels since 3.13. However, the userspace nouveau-ddx needs to be aware if it is running on a kernel on which these bugs are fixed, or not. Bump the patchlevel of the drm driver version to signal this, so backporting this patch to stable 3.13+ kernels will give the ddx the required info. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17IB/srp: Fix deadlock between host removal and multipathdBart Van Assche
commit bcc05910359183b431da92713e98eed478edf83a upstream. If scsi_remove_host() is invoked after a SCSI device has been blocked, if the fast_io_fail_tmo or dev_loss_tmo work gets scheduled on the workqueue executing srp_remove_work() and if an I/O request is scheduled after the SCSI device had been blocked by e.g. multipathd then the following deadlock can occur: kworker/6:1 D ffff880831f3c460 0 195 2 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff8105af6f>] msleep+0x2f/0x40 [<ffffffff8123b0ae>] __blk_drain_queue+0x4e/0x180 [<ffffffff8123d2d5>] blk_cleanup_queue+0x225/0x230 [<ffffffffa0010732>] __scsi_remove_device+0x62/0xe0 [scsi_mod] [<ffffffffa000ed2f>] scsi_forget_host+0x6f/0x80 [scsi_mod] [<ffffffffa0002eba>] scsi_remove_host+0x7a/0x130 [scsi_mod] [<ffffffffa07cf5c5>] srp_remove_work+0x95/0x180 [ib_srp] [<ffffffff8106d7aa>] process_one_work+0x1ea/0x6c0 [<ffffffff8106dd9b>] worker_thread+0x11b/0x3a0 [<ffffffff810758bd>] kthread+0xed/0x110 [<ffffffff814b972c>] ret_from_fork+0x7c/0xb0 multipathd D ffff880096acc460 0 5340 1 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff814ab79b>] io_schedule_timeout+0x9b/0xf0 [<ffffffff814abe1c>] wait_for_completion_io_timeout+0xdc/0x110 [<ffffffff81244b9b>] blk_execute_rq+0x9b/0x100 [<ffffffff8124f665>] sg_io+0x1a5/0x450 [<ffffffff8124fd21>] scsi_cmd_ioctl+0x2a1/0x430 [<ffffffff8124fef2>] scsi_cmd_blk_ioctl+0x42/0x50 [<ffffffffa00ec97e>] sd_ioctl+0xbe/0x140 [sd_mod] [<ffffffff8124bd04>] blkdev_ioctl+0x234/0x840 [<ffffffff811cb491>] block_ioctl+0x41/0x50 [<ffffffff811a0df0>] do_vfs_ioctl+0x300/0x520 [<ffffffff811a1051>] SyS_ioctl+0x41/0x80 [<ffffffff814b9962>] tracesys+0xd0/0xd5 Fix this by scheduling removal work on another workqueue than the transport layer timers. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: David Dillow <dave@thedillows.org> Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()Roger Quadros
commit 40ddbf5069bd4e11447c0088fc75318e0aac53f0 upstream. commit 65b97cf6b8de introduced in v3.7 caused a regression by using a reversed CS_MASK thus causing omap_calculate_ecc to always fail. As the NAND base driver never checks for .calculate()'s return value, the zeroed ECC values are used as is without showing any error to the user. However, this won't work and the NAND device won't be guarded by any error code. Fix the issue by using the correct mask. Code was tested on omap3beagle using the following procedure - flash the primary bootloader (MLO) from the kernel to the first NAND partition using nandwrite. - boot the board from NAND. This utilizes OMAP ROM loader that relies on 1-bit Hamming code ECC. Fixes: 65b97cf6b8de (mtd: nand: omap2: handle nand on gpmc) Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17mtd/ftl: fix the double free of the buffers allocated in build_maps()Kevin Hao
commit a152056c912db82860a8b4c23d0bd3a5aa89e363 upstream. I got the following panic on my fsl p5020ds board. Unable to handle kernel paging request for data at address 0x7375627379737465 Faulting instruction address: 0xc000000000100778 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 CoreNet Generic Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145 task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000 NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000 REGS: c0000000fe08aa00 TRAP: 0300 Not tainted (3.15.0-next-20140613) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad2e24 XER: 00000000 DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1 GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80 GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000 GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200 GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000 GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8 GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10 GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400 GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80 NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168 LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168 Call Trace: [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable) [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90 [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130 [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64 [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8 [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384 [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8 [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654 [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4 [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514 [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4 [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94 [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368 [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104 [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734 [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84 [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104 [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4 [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38 [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158 [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80 [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30 [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238 [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268 [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008 7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2 ---[ end trace b4c9a94804a42d40 ]--- It seems that the corrupted partition header on my mtd device triggers a bug in the ftl. In function build_maps() it will allocate the buffers needed by the mtd partition, but if something goes wrong such as kmalloc failure, mtd read error or invalid partition header parameter, it will free all allocated buffers and then return non-zero. In my case, it seems that partition header parameter 'NumTransferUnits' is invalid. And the ftl_freepart() is a function which free all the partition buffers allocated by build_maps(). Given the build_maps() is a self cleaning function, so there is no need to invoke this function even if build_maps() return with error. Otherwise it will causes the buffers to be freed twice and then weird things would happen. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17RDMA/iwcm: Use a default listen backlog if neededSteve Wise
commit 2f0304d21867476394cd51a54e97f7273d112261 upstream. If the user creates a listening cm_id with backlog of 0 the IWCM ends up not allowing any connection requests at all. The correct behavior is for the IWCM to pick a default value if the user backlog parameter is zero. Lustre from version 1.8.8 onward uses a backlog of 0, which breaks iwarp support without this fix. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17md/raid10: Fix memory leak when raid10 reshape completes.NeilBrown
commit b39685526f46976bcd13aa08c82480092befa46c upstream. When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Fixes: 3ea7daa5d7fde47cd41f4d56c2deb949114da9d6 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17md/raid10: fix memory leak when reshaping a RAID10.NeilBrown
commit ce0b0a46955d1bb389684a2605dbcaa990ba0154 upstream. raid10 reshape clears unwanted bits from a bio->bi_flags using a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC was added. Since then it clears that bit but shouldn't. This results in a memory leak. So change to used the approved method of clearing unwanted bits. As this causes a memory leak which can consume all of memory the fix is suitable for -stable. Fixes: a38352e0ac02dbbd4fa464dc22d1352b5fbd06fd Reported-by: mdraid.pkoch@dfgh.net (Peter Koch) Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17md/raid6: avoid data corruption during recovery of double-degraded RAID6NeilBrown
commit 9c4bdf697c39805078392d5ddbbba5ae5680e0dd upstream. During recovery of a double-degraded RAID6 it is possible for some blocks not to be recovered properly, leading to corruption. If a write happens to one block in a stripe that would be written to a missing device, and at the same time that stripe is recovering data to the other missing device, then that recovered data may not be written. This patch skips, in the double-degraded case, an optimisation that is only safe for single-degraded arrays. Bug was introduced in 2.6.32 and fix is suitable for any kernel since then. In an older kernel with separate handle_stripe5() and handle_stripe6() functions the patch must change handle_stripe6(). Fixes: 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: "Manibalan P" <pmanibalan@amiindia.co.in> Tested-by: "Manibalan P" <pmanibalan@amiindia.co.in> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090423 Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17md/raid1,raid10: always abort recover on write error.NeilBrown
commit 2446dba03f9dabe0b477a126cbeb377854785b47 upstream. Currently we don't abort recovery on a write error if the write error to the recovering device was triggerd by normal IO (as opposed to recovery IO). This means that for one bitmap region, the recovery might write to the recovering device for a few sectors, then not bother for subsequent sectors (as it never writes to failed devices). In this case the bitmap bit will be cleared, but it really shouldn't. The result is that if the recovering device fails and is then re-added (after fixing whatever hardware problem triggerred the failure), the second recovery won't redo the region it was in the middle of, so some of the device will not be recovered properly. If we abort the recovery, the region being processes will be cancelled (bit not cleared) and the whole region will be retried. As the bug can result in data corruption the patch is suitable for -stable. For kernels prior to 3.11 there is a conflict in raid10.c which will require care. Original-from: jiao hui <jiaohui@bwstor.com.cn> Reported-and-tested-by: jiao hui <jiaohui@bwstor.com.cn> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Bluetooth: btmrvl: wait for HOST_SLEEP_ENABLE event in suspendChin-Ran Lo
commit 396e04f4bb9afefb0744715dc76d9abe18ee5fb0 upstream. After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Jeff CF Chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17xen/events/fifo: reset control block and local HEADs on resumeDavid Vrabel
commit c12784c3d14a2110468ec4d1383f60cfd2665576 upstream. When using the FIFO-based event channel ABI, if the control block or the local HEADs are not reset after resuming the guest may see stale HEAD values and will fail to traverse the FIFO correctly. This may prevent one or more VCPUs from receiving any events following a resume. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lockJiri Kosina
commit 6726655dfdd2dc60c035c690d9f10cb69d7ea075 upstream. There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ACPI / scan: not cache _SUN value in struct acpi_device_pnpYasuaki Ishimatsu
commit a383b68d9fe9864c4d3b86f67ad6488f58136435 upstream. The _SUN device indentification object is not guaranteed to return the same value every time it is executed, so we should not cache its return value, but rather execute it every time as needed. If it is cached, an incorrect stale value may be used in some situations. This issue was exposed by commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace). Fix it by avoiding to cache the return value of _SUN. Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ACPI: Run fixed event device notifications in process contextLan Tianyu
commit 236105db632c6279a020f78c83e22eaef746006b upstream. Currently, notify callbacks for fixed button events are run from interrupt context. That is not necessary and after commit 0bf6368ee8f2 (ACPI / button: Add ACPI Button event via netlink routine) it causes netlink routines to be called from interrupt context which is not correct. Also, that is different from non-fixed device events (including non-fixed button events) whose notify callbacks are all executed from process context. For the above reasons, make fixed button device notify callbacks run in process context which will avoid the deadlock when using netlink to report button events to user space. Fixes: 0bf6368ee8f2 (ACPI / button: Add ACPI Button event via netlink routine) Link: https://lkml.org/lkml/2014/8/21/606 Reported-by: Benjamin Block <bebl@mageta.org> Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> [rjw: Function names, subject and changelog.] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17spi/pxa2xx: Add ACPI ID for Intel BraswellAlan Cox
commit aca26364689e00e3b2052072424682231bdae6ae upstream. The SPI host controller is the same as used in Baytrail, only the ACPI ID is different so add this new ID to the list. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()Tang Chen
commit dee1592638ab7ea35a32179b73f9284dead49c03 upstream. When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach is not set. In acpi_scan_attach_handler(), the acpi_device->handler will not be initialized. In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL. If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel will panic. BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 PGD 0 Oops: 0000 [#1] SMP Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E) CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G E 3.16.0-rc7--3.16-rc7-tangchen+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000 RIP: 0010:[<ffffffff813e318f>] [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 RSP: 0000:ffff880018257da8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Stack: 00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58 ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00 0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480 Call Trace: [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29 [<ffffffff8108eefb>] process_one_work+0x17b/0x460 [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0 [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0 [<ffffffff81096811>] kthread+0xe1/0x100 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 This patch fixes this problem by checking if acpi_device->handler is NULL in acpi_scan_hot_remove(). Fixes: d22ddcbc4fb7 (ACPI / hotplug: Add demand_offline hotplug profile flag) Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobjectDavid E. Box
commit 8aa5e56eeb61a099ea6519eb30ee399e1bc043ce upstream. Adds return status check on copy routines to delete the allocated destination object if either copy fails. Reported by Colin Ian King on bugs.acpica.org, Bug 1087. The last applicable commit: Commit: 3371c19c294a4cb3649aa4e84606be8a1d999e61 Subject: ACPICA: Remove ACPI_GET_OBJECT_TYPE macro Link: https://bugs.acpica.org/show_bug.cgi?id=1087 Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17bq2415x_charger: Fix Atomic Sleep BugSebastian Reichel
commit 3c0185046c0ee49a6e55c714612ef3bcd5385df3 upstream. Move sysfs_notify and i2c_transfer calls from bq2415x_notifier_call to bq2415x_timer_work to avoid sleeping in atomic context. This fixes the following bug: [ 7.667449] Workqueue: events power_supply_changed_work [ 7.673034] [<c0015c28>] (unwind_backtrace+0x0/0xe0) from [<c0011e1c>] (show_stack+0x10/0x14) [ 7.682098] [<c0011e1c>] (show_stack+0x10/0x14) from [<c052cdd0>] (dump_stack+0x78/0xac) [ 7.690704] [<c052cdd0>] (dump_stack+0x78/0xac) from [<c052a044>] (__schedule_bug+0x48/0x60) [ 7.699645] [<c052a044>] (__schedule_bug+0x48/0x60) from [<c053071c>] (__schedule+0x74/0x638) [ 7.708618] [<c053071c>] (__schedule+0x74/0x638) from [<c05301fc>] (schedule_timeout+0x1dc/0x24c) [ 7.718017] [<c05301fc>] (schedule_timeout+0x1dc/0x24c) from [<c05316ec>] (wait_for_common+0x138/0x17c) [ 7.727966] [<c05316ec>] (wait_for_common+0x138/0x17c) from [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) [ 7.737640] [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) from [<c035d928>] (__i2c_transfer+0x40/0x74) [ 7.747039] [<c035d928>] (__i2c_transfer+0x40/0x74) from [<c035e22c>] (i2c_transfer+0x6c/0x90) [ 7.756195] [<c035e22c>] (i2c_transfer+0x6c/0x90) from [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) [ 7.765563] [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) from [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) [ 7.776824] [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) from [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) [ 7.788085] [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) from [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) [ 7.798309] [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) from [<c005f228>] (notifier_call_chain+0x38/0x68) [ 7.808715] [<c005f228>] (notifier_call_chain+0x38/0x68) from [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) [ 7.819732] [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) from [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) [ 7.831420] [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) from [<c0378078>] (power_supply_changed_work+0x6c/0xb8) [ 7.842864] [<c0378078>] (power_supply_changed_work+0x6c/0xb8) from [<c00556c0>] (process_one_work+0x248/0x440) [ 7.853546] [<c00556c0>] (process_one_work+0x248/0x440) from [<c0055d6c>] (worker_thread+0x208/0x350) [ 7.863372] [<c0055d6c>] (worker_thread+0x208/0x350) from [<c005b0ac>] (kthread+0xc8/0xdc) [ 7.872131] [<c005b0ac>] (kthread+0xc8/0xdc) from [<c000e138>] (ret_from_fork+0x14/0x3c) Fixes: 32260308b4ca ("bq2415x_charger: Use power_supply notifier for automode") Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17bfa: Fix undefined bit shift on big-endian architectures with 32-bit DMA addressBen Hutchings
commit 03a6c3ff3282ee9fa893089304d951e0be93a144 upstream. bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Fixes: f16a17507b09 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17scsi_transport_srp: Fix fast_io_fail_tmo=dev_loss_tmo=off behaviorBart Van Assche
commit cd53eb686d2418eda938aad3c9da42b7dfa9351f upstream. If scsi_remove_host() is called while an rport is in the blocked state then scsi_remove_host() will only finish if the rport is unblocked from inside a timer function. Make sure that an rport only enters the blocked state if a timer will be started that will unblock it. This avoids that unloading the ib_srp kernel module after having disconnected the initiator from the target system results in a deadlock if both the fast_io_fail_tmo and dev_loss_tmo parameters have been set to "off". Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: David Dillow <dave@thedillows.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17scsi: do not issue SCSI RSOC command to Promise Vtrak E610fJanusz Dziemidowicz
commit 0213436a2cc5e4a5ca2fabfaa4d3877097f3b13f upstream. Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17scsi: add a blacklist flag which enables VPD page inquiriesMartin K. Petersen
commit c1d40a527e885a40bb9ea6c46a1b1145d42b66a0 upstream. Despite supporting modern SCSI features some storage devices continue to claim conformance to an older version of the SPC spec. This is done for compatibility with legacy operating systems. Linux by default will not attempt to read VPD pages on devices that claim SPC-2 or older. Introduce a blacklist flag that can be used to trigger VPD page inquiries on devices that are known to support them. Reported-by: KY Srinivasan <kys@microsoft.com> Tested-by: KY Srinivasan <kys@microsoft.com> Reviewed-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17scsi_scan: Restrict sequential scan to 256 LUNsHannes Reinecke
commit 22ffeb48b7584d6cd50f2a595ed6065d86a87459 upstream. Sequential scan for more than 256 LUNs is very fragile as LUNs might not be numbered sequentially after that point. SAM revisions later than SCSI-3 impose a structure on LUNs larger than 256, making LUN numbers between 256 and 16384 illegal. SCSI-3, however allows for plain 64-bit numbers with no internal structure. So restrict sequential LUN scan to 256 LUNs and add a new blacklist flag 'BLIST_SCSI3LUN' to scan up to max_lun devices. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17drivers: scsi: storvsc: Correctly handle TEST_UNIT_READY failureK. Y. Srinivasan
commit 3533f8603d28b77c62d75ec899449a99bc6b77a1 upstream. On some Windows hosts on FC SANs, TEST_UNIT_READY can return SRB_STATUS_ERROR. Correctly handle this. Note that there is sufficient sense information to support scsi error handling even in this case. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17drivers: scsi: storvsc: Set srb_flags in all casesK. Y. Srinivasan
commit f885fb73f64154690c2158e813de56363389ffec upstream. Correctly set SRB flags for all valid I/O directions. Some IHV drivers on the Windows host require this. The host validates the command and SRB flags prior to passing the command down to native driver stack. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Drivers: scsi: storvsc: Fix a bug in handling VMBUS protocol versionK. Y. Srinivasan
commit adb6f9e1a8c6af1037232b59edb11277471537ea upstream. Based on the negotiated VMBUS protocol version, we adjust the size of the storage protocol messages. The two sizes we currently handle are pre-win8 and post-win8. In WS2012 R2, we are negotiating higher VMBUS protocol version than the win8 version. Make adjustments to correctly handle this. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Drivers: scsi: storvsc: Set cmd_per_lun to reflect value supported by the HostK. Y. Srinivasan
commit 52f9614dd8294e95d2c0929c2d4f64b077ae486f upstream. Set cmd_per_lun to reflect value supported by the Host. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Drivers: scsi: storvsc: Change the limits to reflect the values on the hostK. Y. Srinivasan
commit 4cd83ecdac20d30725b4f96e5d7814a1e290bc7e upstream. Hyper-V hosts can support multiple targets and multiple channels and larger number of LUNs per target. Update the code to reflect this. With this patch we can correctly enumerate all the paths in a multi-path storage environment. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Drivers: scsi: storvsc: Filter commands based on the storage protocol versionK. Y. Srinivasan
commit 8caf92d80526f3d7cc96831ec18b384ebcaccdf0 upstream. Going forward it is possible that some of the commands that are not currently implemented will be implemented on future Windows hosts. Even if they are not implemented, we are told the host will corrrectly handle unsupported commands (by returning appropriate return code and sense information). Make command filtering depend on the host version. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17Drivers: scsi: storvsc: Implement a eh_timed_out handlerK. Y. Srinivasan
commit 56b26e69c8283121febedd12b3cc193384af46b9 upstream. On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> [hch: added a better comment explaining the issue] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17regulator: arizona-ldo1: remove bypass functionalityNikesh Oswal
commit 5b919f3ebb533cbe400664837e24f66a0836b907 upstream. WM5110/8280 devices do not support bypass mode for LDO1 so remove the bypass callbacks registered with regulator core. Signed-off-by: Nikesh Oswal <nikesh@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17mfd: omap-usb-host: Fix improper mask use.Michael Welling
commit 46de8ff8e80a6546aa3d2fdf58c6776666301a0c upstream. single-ulpi-bypass is a flag used for older OMAP3 silicon. The flag when set, can excite code that improperly uses the OMAP_UHH_HOSTCONFIG_UPLI_BYPASS define to clear the corresponding bit. Instead it clears all of the other bits disabling all of the ports in the process. Signed-off-by: Michael Welling <mwelling@emacinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17tpm: Properly clean sysfs entries in error pathStefan Berger
commit b49e1043c48dac23f64fba684d31c4a96c1ffaa0 upstream. Properly clean the sysfs entries in the error path Reported-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17tpm: Provide a generic means to override the chip returned timeoutsJason Gunthorpe
commit 8e54caf407b98efa05409e1fee0e5381abd2b088 upstream. Some Atmel TPMs provide completely wrong timeouts from their TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns new correct values via a DID/VID table in the TIS driver. Tested on ARM using an AT97SC3204T FW version 37.16 [PHuewe: without this fix these 'broken' Atmel TPMs won't function on older kernels] Signed-off-by: "Berg, Christopher" <Christopher.Berg@atmel.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-09-17tpm: missing tpm_chip_put in tpm_get_random()Jarkko Sakkinen
commit 3e14d83ef94a5806a865b85b513b4e891923c19b upstream. Regression in 41ab999c. Call to tpm_chip_put is missing. This will cause TPM device driver not to unload if tmp_get_random() is called. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17firmware: Do not use WARN_ON(!spin_is_locked())Guenter Roeck
commit aee530cfecf4f3ec83b78406bac618cec35853f8 upstream. spin_is_locked() always returns false for uniprocessor configurations in several architectures, so do not use WARN_ON with it. Use lockdep_assert_held() instead to also reduce overhead in non-debug kernels. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17drm/radeon: use packet2 for nop on hawaii with old firmwareAlex Deucher
commit 0e16e4cfde70e1cf00f9fe3a8f601d10e73e0ec6 upstream. Older firmware didn't support the new nop packet. v2 (Andreas Boll): - Drop usage of packet3 for new firmware Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17spi: omap2-mcspi: Configure hardware when slave driver changes modeMark A. Greer
commit 97ca0d6cc118716840ea443e010cb3d5f2d25eaf upstream. Commit id 2bd16e3e23d9df41592c6b257c59b6860a9cc3ea (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) does its job too well so omap2_mcspi_setup_transfer() isn't called even when an SPI slave driver changes 'spi->mode'. The result is that the mode requested by the SPI slave driver never takes effect. Fix this by adding the 'mode' member to the omap2_mcspi_cs structure which holds the mode value that the hardware is configured for. When the SPI slave driver changes 'spi->mode' it will be different than the value of this new member and the SPI master driver will know that the hardware must be reconfigured (by calling omap2_mcspi_setup_transfer()). Fixes: 2bd16e3e23 (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17spi: orion: fix incorrect handling of cell-index DT propertyThomas Petazzoni
commit e06871cd2c92e5c65d7ca1d32866b4ca5dd4ac30 upstream. In commit f814f9ac5a81 ("spi/orion: add device tree binding"), Device Tree support was added to the spi-orion driver. However, this commit reads the "cell-index" property, without taking into account the fact that DT properties are big-endian encoded. Since most of the platforms using spi-orion with DT have apparently not used anything but cell-index = <0>, the problem was not visible. But as soon as one starts using cell-index = <1>, the problem becomes clearly visible, as the master->bus_num gets a wrong value (actually it gets the value 0, which conflicts with the first bus that has cell-index = <0>). This commit fixes that by using of_property_read_u32() to read the property value, which does the appropriate endianness conversion when needed. Fixes: f814f9ac5a81 ("spi/orion: add device tree binding") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17iommu/amd: Fix cleanup_domain for mass device removalJoerg Roedel
commit 9b29d3c6510407d91786c1cf9183ff4debb3473a upstream. When multiple devices are detached in __detach_device, they are also removed from the domains dev_list. This makes it unsafe to use list_for_each_entry_safe, as the next pointer might also not be in the list anymore after __detach_device returns. So just repeatedly remove the first element of the list until it is empty. Tested-by: Marti Raudsepp <marti@juffo.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: sms: Remove CONFIG_ prefix from Kconfig symbolsPaul Bolle
commit 3c4b422adb7694418848cefc2a4669d63192c649 upstream. X-Patchwork-Delegate: mchehab@redhat.com Remove the CONFIG_ prefix from two Kconfig symbols in a dependency for SMS_SIANO_DEBUGFS. This prefix is invalid inside Kconfig files. Note that the current (common sense) dependency on SMS_USB_DRV and SMS_SDIO_DRV being equal ensures that SMS_SIANO_DEBUGFS will not violate its constraints. These constraint are that: - it should only be built if SMS_USB_DRV is set; - it can't be builtin if USB support is modular. So drop the dependency on SMS_USB_DRV, as it is unneeded. Fixes: 6c84b214284e ("[media] sms: fix randconfig building error") Reported-by: Martin Walch <walch.martin@web.de> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: v4l: vsp1: Remove the unneeded vsp1_video_buffer video fieldLaurent Pinchart
commit e51daefc228aa164adcc17fe8fce0f856ad0a1cc upstream. The field is assigned but never read, remove it. This fixes a bug caused by the struct vb2_buffer field not being be the very first field of the vsp1_video_buffer buffer structure as required by videobuf2. Reported-by: Takanari Hayama <taki@igel.co.jp> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: mt9v032: fix hblank calculationPhilipp Zabel
commit f17bc3f4707eb87bdb80b895911c551cdd606fbd upstream. Since (min_row_time - crop->width) can be negative, we have to do a signed comparison here. Otherwise max_t casts the negative value to unsigned int and sets min_hblank to that invalid value. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: media-device: Remove duplicated memset() in media_enum_entities()Salva Peiró
commit f8ca6ac00d2ba24c5557f08f81439cd3432f0802 upstream. After the zeroing the whole struct struct media_entity_desc u_ent, it is no longer necessary to memset(0) its u_ent.name field. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: au0828: Only alt setting logic when neededMauro Carvalho Chehab
commit 64ea37bbd8a5815522706f0099ad3f11c7537e15 upstream. It seems that there's a bug at au0828 hardware/firmware related to alternate setting: when the device is already at alt 5, a further call causes the URBs to receive -ESHUTDOWN. I found two different encarnations of this issue: 1) at qv4l2, it fails the second time we try to open the video screen; 2) at xawtv, when audio underrun occurs, with is very frequent, at least on my test machine. The fix is simple: just check if alt=5 before calling set_usb_interface(). Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: xc4000: Fix get_frequency()Mauro Carvalho Chehab
commit 4c07e32884ab69574cfd9eb4de3334233c938071 upstream. The programmed frequency on xc4000 is not the middle frequency, but the initial frequency on the bandwidth range. However, the DVB API works with the middle frequency. This works fine on set_frontend, as the device calculates the needed offset. However, at get_frequency(), the returned value is the initial frequency. That's generally not a big problem on most drivers, however, starting with changeset 6fe1099c7aec, the frequency drift is taken into account at dib7000p driver. This broke support for PCTV 340e, with uses dib7000p demod and xc4000 tuner. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17media: xc5000: Fix get_frequency()Mauro Carvalho Chehab
commit a3eec916cbc17dc1aaa3ddf120836cd5200eb4ef upstream. The programmed frequency on xc5000 is not the middle frequency, but the initial frequency on the bandwidth range. However, the DVB API works with the middle frequency. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05USB: fix build error with CONFIG_PM_RUNTIME disabledGreg Kroah-Hartman
commit a9ef803d740bfadf5e505fbc57efa57692e27025 upstream. commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1Roger Quadros
commit bdd405d2a5287bdb9b04670ea255e1f122138e66 upstream. If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a211d introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Michael Welling <mwelling@emacinc.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05usb: ehci: using wIndex + 1 for hub portPeter Chen
commit 5cbcc35e5bf0eae3c7494ce3efefffc9977827ae upstream. The roothub's index per controller is from 0, but the hub port index per hub is from 1, this patch fixes "can't find device at roohub" problem for connecting test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test. This patch is for v3.12+. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-16 04:54:50 +0000