| Age | Commit message (Collapse) | Author |
|---|
|
commit 447ae316670230d7d29430e2cbf1f5db4f49d14c upstream
The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().
Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like
asm/smp.h
asm/apic.h
asm/hardirq.h
linux/irq.h
linux/topology.h
linux/smp.h
asm/smp.h
or
linux/gfp.h
linux/mmzone.h
asm/mmzone.h
asm/mmzone_64.h
asm/smp.h
asm/apic.h
asm/hardirq.h
linux/irq.h
linux/irqdesc.h
linux/kobject.h
linux/sysfs.h
linux/kernfs.h
linux/idr.h
linux/gfp.h
and others.
This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.
A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.
However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.
Remove the linux/irq.h #include from x86' asm/hardirq.h.
Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.
Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[dwmw2: More fixes for EFI and Xen in 4.9]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream
L1TF core kernel workarounds are cheap and normally always enabled, However
they still should be reported in sysfs if the system is vulnerable or
mitigated. Add the necessary CPU feature/bug bits.
- Extend the existing checks for Meltdowns to determine if the system is
vulnerable. All CPUs which are not vulnerable to Meltdown are also not
vulnerable to L1TF
- Check for 32bit non PAE and emit a warning as there is no practical way
for mitigation due to the limited physical address bits
- If the system has more than MAX_PA/2 physical memory the invert page
workarounds don't protect the system against the L1TF attack anymore,
because an inverted physical address will also point to valid
memory. Print a warning in this case and report that the system is
vulnerable.
Add a function which returns the PFN limit for the L1TF mitigation, which
will be used in follow up patches for sanity and range checks.
[ tglx: Renamed the CPU feature bit to L1TF_PTEINV ]
[ dwmw2: Backport to 4.9 (cpufeatures.h, E820) ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 062d0f22a30c39840ea49b72cfcfc1aa4cc538fa upstream.
In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is
written at index 'count-1' where 'count' is the size of the write, so
potentially 0.
This patch filters odd values for the write size/position to avoid this
type of problem.
Signed-off-by: Michael Mera <dev@michaelmera.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 069f05346d01e7298939f16533953cdf52370be3 upstream.
devm_kasprintf() may fail, so we should better add a NULL check
and propagate an error on failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8f9cc328c8888369880e2527e9186d745f2bbf6 upstream.
To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.
As a result, any attempt to register a read-only MR over read-only
virtual memory failed.
To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).
However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.
If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.
Cc: <stable@vger.kernel.org>
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08bb558ac11ab944e0539e78619d7b4c356278bd upstream.
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
enabled
commit 1214fd7b497400d200e3f4e64e2338b303a20949 upstream.
Surround scsi_execute() calls with scsi_autopm_get_device() and
scsi_autopm_put_device(). Note: removing sr_mutex protection from the
scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of
sr_mutex is to serialize cdrom_*() calls.
This patch avoids that complaints similar to the following appear in the
kernel log if runtime power management is enabled:
INFO: task systemd-udevd:650 blocked for more than 120 seconds.
Not tainted 4.18.0-rc7-dbg+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
systemd-udevd D28176 650 513 0x00000104
Call Trace:
__schedule+0x444/0xfe0
schedule+0x4e/0xe0
schedule_preempt_disabled+0x18/0x30
__mutex_lock+0x41c/0xc70
mutex_lock_nested+0x1b/0x20
__blkdev_get+0x106/0x970
blkdev_get+0x22c/0x5a0
blkdev_open+0xe9/0x100
do_dentry_open.isra.19+0x33e/0x570
vfs_open+0x7c/0xd0
path_openat+0x6e3/0x1120
do_filp_open+0x11c/0x1c0
do_sys_open+0x208/0x2d0
__x64_sys_openat+0x59/0x70
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fdcb613d49321b5bf5d5a1bd0fba8e7c241dcc70 upstream.
The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set
of private registers at offset 0x800, the current lpss_device_desc for
them already sets the LPSS_SAVE_CTX flag to have these saved/restored
over device-suspend, but the current lpss_device_desc was not setting
the prv_offset field, leading to the regular device registers getting
saved/restored instead.
This is causing the PWM controller to no longer work, resulting in a black
screen, after a suspend/resume on systems where the firmware clears the
APB clock and reset bits at offset 0x804.
This commit fixes this by properly setting prv_offset to 0x800 for
the PWM devices.
Cc: stable@vger.kernel.org
Fixes: e1c748179754 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM")
Fixes: 1bfbd8eb8a7f ("ACPI / LPSS: Add ACPI IDs for Intel Braswell")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d472b3a6cf63cd31cae1ed61930f07e6cd6671b5 upstream.
skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache
its return value.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ab2011ea368ec3433ad49e1b9e1c7b70d2e65df upstream.
There is a race condition in tpm_common_write function allowing
two threads on the same /dev/tpm<N>, or two different applications
on the same /dev/tpmrm<N> to overwrite each other commands/responses.
Fixed this by taking the priv->buffer_mutex early in the function.
Also converted the priv->data_pending from atomic to a regular size_t
type. There is no need for it to be atomic since it is only touched
under the protection of the priv->buffer_mutex.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b697d7d8c741f27b728a878fc55852b06d0f6f5e upstream.
The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL.
All of the relevant call sites look for IS_ERR, so the NULL return would
lead to a NULL pointer exception.
Do not use the ERR_PTR mechanism for this function.
Update all call sites to handle the return value correctly.
Clean up error paths to reflect return value.
Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code")
Cc: <stable@vger.kernel.org> # 4.9.x+
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f9e3e0d4dd3338b3f3dde080789f71901e1e4ff upstream.
Make sure to call reinit_completion() before dma is started to avoid race
condition where reinit_completion() is called after complete() and before
wait_for_completion_timeout().
Signed-off-by: Esben Haabendal <eha@deif.com>
Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0040c0145945d3bd203df8fa97f6dfa819f3f7d upstream.
Hyper-V instances support PCI pass-through which is implemented through PV
pci-hyperv driver. When a device is passed through, a new root PCI bus is
created in the guest. The bus sits on top of VMBus and has no associated
information in ACPI. acpi_pci_add_bus() in this case proceeds all the way
to acpi_evaluate_dsm(), which reports
ACPI: \: failed to evaluate _DSM (0x1001)
While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected
against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not
and gives us the error. It seems the correct fix is to not do anything in
acpi_pci_add_bus() in such cases.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4146c4929ef61d5afca011474d59d0918a0cd82 upstream.
Propagate the task management completion status properly to avoid
unnecessary waits for commands to complete.
Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b08abbd9f5996309f021684f9ca74da30dcca36a upstream.
During unload process, the chip can encounter problem where a FW dump would
be captured. For this case, the full reset sequence will be skip to bring
the chip back to full operational state.
Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c170e5a8d222537e98aa8d4fddb667ff7a2ee114 upstream.
Fix a minor memory leak when there is an error opening a /dev/sg device.
Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6a00918d4ad8718c3ccde38c02cec17f116b2fd upstream.
This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46d8c4b28652d35dc6cfb5adf7f54e102fc04384 upstream.
This was detected by the self-test thanks to Ard's chunking patch.
I finally got around to testing this out on my ancient Via box. It
turns out that the workaround got the assembly wrong and we end up
doing count + initial cycles of the loop instead of just count.
This obviously causes corruption, either by overwriting the source
that is yet to be processed, or writing over the end of the buffer.
On CPUs that don't require the workaround only ECB is affected.
On Nano CPUs both ECB and CBC are affected.
This patch fixes it by doing the subtraction prior to the assembly.
Fixes: a76c1c23d0c3 ("crypto: padlock-aes - work around Nano CPU...")
Cc: <stable@vger.kernel.org>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89da619bc18d79bca5304724c11d4ba3b67ce2c6 upstream.
Kernel panic when with high memory pressure, calltrace looks like,
PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java"
#0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb
#1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942
#2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30
#3 [ffff881ec7ed7778] oops_end at ffffffff816902c8
#4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46
#5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc
#6 [ffff881ec7ed7838] __node_set at ffffffff81680300
#7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f
#8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5
#9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8
[exception RIP: _raw_spin_lock_irqsave+47]
RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8
RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008
RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098
R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
It happens in the pagefault and results in double pagefault
during compacting pages when memory allocation fails.
Analysed the vmcore, the page leads to second pagefault is corrupted
with _mapcount=-256, but private=0.
It's caused by the race between migration and ballooning, and lock
missing in virtballoon_migratepage() of virtio_balloon driver.
This patch fix the bug.
Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages")
Cc: stable@vger.kernel.org
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Huang Chong <huang.chong@zte.com.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72c05f32f4a5055c9c8fe889bb6903ec959c0aad upstream.
ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there
is no its deallocation in ems_usb_disconnect().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b7d0f08e9129c45ed41bc0cfa8e77067881e45fd ]
WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.
Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7e2556e40026a1b0c16f37446ab398d5a5a892e4 ]
syzbot found that the following sequence produces a LOCKDEP splat [1]
ip link add bond10 type bond
ip link add bond11 type bond
ip link set bond11 master bond10
To fix this, we can use the already provided nest_level.
This patch also provides correct nesting for dev->addr_list_lock
[1]
WARNING: possible recursive locking detected
4.18.0-rc6+ #167 Not tainted
--------------------------------------------
syz-executor751/4439 is trying to acquire lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
but task is already holding lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&bond->stats_lock)->rlock);
lock(&(&bond->stats_lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by syz-executor751/4439:
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
#1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
#1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
#2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215
stack backtrace:
CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
check_deadlock kernel/locking/lockdep.c:1809 [inline]
validate_chain kernel/locking/lockdep.c:2405 [inline]
__lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:310 [inline]
bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
dev_get_stats+0x10f/0x470 net/core/dev.c:8316
bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432
dev_get_stats+0x10f/0x470 net/core/dev.c:8316
rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169
rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611
rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268
rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300
rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline]
rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716
notifier_call_chain+0x180/0x390 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
call_netdevice_notifiers net/core/dev.c:1753 [inline]
netdev_features_change net/core/dev.c:1321 [inline]
netdev_change_features+0xb3/0x110 net/core/dev.c:7759
bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120
bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755
bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528
dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327
dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493
sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992
sock_ioctl+0x30d/0x680 net/socket.c:1093
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
__do_sys_ioctl fs/ioctl.c:708 [inline]
__se_sys_ioctl fs/ioctl.c:706 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440859
Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859
RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390
R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d68b42e30bbacd24354d644f430d088435b15e83 upstream.
In the same way as it's done in pinctrl-cherryview.c we would provide
a readback TX buffer state.
Fixes: 17fab473693 ("pinctrl: intel: Set pin direction properly")
Reported-by: "Bourque, Francis" <francis.bourque@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: "Bourque, Francis" <francis.bourque@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Anthony de Boer <adb@adb.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 822fb18a82abaf4ee7058793d95d340f5dab7bfc ]
When loading module manually, after call xenbus_switch_state to initializes
the state of the netfront device, the driver state did not change so fast
that may lead no dev created in latest kernel. This patch adds wait to make
sure xenbus knows the driver is not in closed/unknown state.
Current state:
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available
With the patch installed.
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9939a46d90c6c76f4533d534dbadfa7b39dc6acc ]
As for today STMMAC_ALIGN macro (which is used to align DMA stuff)
relies on L1 line length (L1_CACHE_BYTES).
This isn't correct in case of system with several cache levels
which might have L1 cache line length smaller than L2 line. This
can lead to sharing one cache line between DMA buffer and other
data, so we can lose this data while invalidate DMA buffer before
DMA transaction.
Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for
aligning.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b0753408aadf32c7ece9e6b765017881e54af833 ]
mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer
in device, whereas mdio_mux_iproc_remove() restores md pointer by
dev_get_platdata(&pdev->dev). This leads to wrong resources release.
The patch replaces getter to platform_get_drvdata.
Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs")
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ]
As long the bh tasklet isn't scheduled once, no packet from the rx path
will be handled. Since the tx path also schedule the same tasklet
this situation only persits until the first packet transmission.
So fix this issue by scheduling the tasklet after link reset.
Link: https://github.com/raspberrypi/linux/issues/2617
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Suggested-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7f3fc7ddf719cd6faaf787722c511f6918ac6aab ]
If we enable or disable xgbe flow-control by ethtool ,
it does't work.Because the parameter is not properly
assigned,so we need to adjust the assignment order
of the parameters.
Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic")
Signed-off-by: tangpengpeng <tangpengpeng@higon.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 101f0cd4f2216d32f1b8a75a2154cf3997484ee2 ]
UBSAN triggers the following undefined behaviour warnings:
[...]
[ 13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22
[ 13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
[ 13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4
[ 13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
When splitting the address to high and low, GENMASK_ULL is used to generate
a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and
ena_com_add_single_rx_desc).
The problem is that dma_addr_bits is not initialized with a proper value
(besides being cleared in ena_com_create_io_queue).
Assign dma_addr_bits the correct value that is stored in ena_dev when
initializing the SQ.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9bb2289f90e671bdb78e306974187424ac19ff8e upstream.
Implement adjust_link function that allows to overwrite default CPU port
setting using fixed-link device tree subnode.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eee1fe64765c562d8bcaf95e5631a8ea2f760f34 upstream.
When a port is brought up/down do not enable/disable only the TXMAC
but the RXMAC as well. This is essential for the CPU port to work.
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79a4ed4f0f93fc65e48a0fc5247ffa5645f7b0cc upstream.
By default autonegotiation is enabled to configure MAC on all ports.
For the CPU port autonegotiation can not be used so we need to set
some sensible defaults manually.
This patch forces the default setting of the CPU port to 1000Mbps/full
duplex which is the chip maximum capability.
Also correct size of the bit field used to configure link speed.
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 940efcc8889f0d15567eb07fc9fd69b06e366aa5 upstream.
Flows can be created on UD and RAW_PACKET QP types. Attempts to provide
other QP types as an input causes to various unpredictable failures.
The reason is that in order to support all various types (e.g. XRC), we
are supposed to use real_qp handle and not qp handle and expect to
driver/FW to fail such (XRC) flows. The simpler and safer variant is to
ban all QP types except UD and RAW_PACKET, instead of relying on
driver/FW.
Cc: <stable@vger.kernel.org> # 3.11
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81e69df38e2911b642ec121dec319fad2a4782f3 upstream.
Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:
https://bugzilla.redhat.com/show_bug.cgi?id=1572944
It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random". Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.
So if RDRAND is available, mix it into entropy submitted from
userspace. It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream. And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.
This also provides some protection against someone who is able to read
or set the entropy seed file.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 90db5c829692a0a7845e977e45719b4699216bd4 ]
The annotations there are wrong as warned:
drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types)
drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident>
drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident>
drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3239b8cd28fd849a2023483257d35d68c5876c74 ]
Hardware could time out Fastpath IOs one second earlier than the timeout
provided by the host.
For non-RAID devices, driver provides timeout value based on OS provided
timeout value. Under certain scenarios, if the OS provides a timeout
value of 1 second, due to above behavior hardware will timeout
immediately.
Increase timeout value for non-RAID fastpath IOs by 1 second.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 37b37d2609cb0ac267280ef27350b962d16d272e ]
SGI/TP9100 is not an RDAC array:
^^^
https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235
This partially reverts commit 35204772ea03 ("[SCSI] scsi_dh_rdac :
Consolidate rdac strings together")
[mkp: fixed up the new entries to align with rest of struct]
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b7e1e6859fbf60519fd82d7120cee106a6019512 ]
The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware
ARM DMA backend. The current code creates a dma_iommu_mapping and
attaches this to the ISP device, but never detaches the mapping in
either the probe failure paths or the driver remove path resulting
in an unbalanced mapping refcount and a memory leak. Fix this properly.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Suman Anna <s-anna@ti.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5d111f5190848d6fb1c414dc57797efea3526a2f ]
wait_for_connected() wait till a port change status to
USB_PORT_STAT_CONNECTION, but this is not possible if
the port is unpowered. The loop will only exit at timeout.
Such case take place if an over-current incident happen
while system is in S3. Then during resume wait_for_connected()
will wait 2s, which may be noticeable by the user.
Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d8caf662b4aeeb2ac83ac0b22e40db88e9360c77 ]
ldlm_lock_create() gets a resource, but don't put it on
all failure paths. It should.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1b60f6dfa38403ff7c4d0b4b7ecdb810f9789a2a ]
In ll_xattr_set_common() detect the removexattr() case correctly by
testing for a NULL value as well as XATTR_REPLACE.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787
Reviewed-on: https://review.whamcloud.com/
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 78e450719c702784e42af6da912d3692fd3da0cb ]
While performing cleanup, driver is messing with card->ocr
value by not masking rocr against ocr_avail. Below panic
is observed with some of the SDIO host controllers due to
this. Issue is resolved by reverting incorrect modifications
to vdd.
[ 927.423821] mmc1: Invalid vdd 0x1f
[ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x
mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic
[ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1
[ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018
[ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci]
[ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282
[ 927.424107] Call Trace:
[ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci]
[ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci]
[ 927.424133] mmc_set_initial_state+0x92/0x120
[ 927.424137] mmc_power_up.part.34+0x33/0x1d0
[ 927.424141] mmc_power_up+0x17/0x20
[ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50
[ 927.424151] mmc_runtime_resume+0x17/0x20
[ 927.424156] __rpm_callback+0xc4/0x200
[ 927.424161] ? idr_alloc_cyclic+0x57/0xd0
[ 927.424165] ? mmc_runtime_suspend+0x20/0x20
[ 927.424169] rpm_callback+0x24/0x80
[ 927.424172] ? mmc_runtime_suspend+0x20/0x20
[ 927.424176] rpm_resume+0x4b3/0x6c0
[ 927.424181] __pm_runtime_resume+0x4e/0x80
[ 927.424188] driver_probe_device+0x41/0x490
[ 927.424192] __driver_attach+0xdf/0xf0
[ 927.424196] ? driver_probe_device+0x490/0x490
[ 927.424201] bus_for_each_dev+0x6c/0xc0
[ 927.424205] driver_attach+0x1e/0x20
[ 927.424209] bus_add_driver+0x1f4/0x270
[ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[ 927.424221] driver_register+0x60/0xe0
[ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[ 927.424231] sdio_register_driver+0x20/0x30
[ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio]
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2ea009095c6e7396915a1d0dd480c41f02985f79 ]
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.
Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1c74d5c0de0c2cc29fef97a19251da2ad6f579bd ]
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf3fbdfbec947cdd04b2f2c4bce11534c8786eee ]
The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the
mask to the interrupt status and don't handle interrupts that MC driver
haven't asked for. Kernel would disable spurious MC IRQ and report the
error. This would happen only in a case of a very severe bug.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 486e6661367b40f927aadbed73237693396cbf94 ]
The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
(kernel Oops) or a security flaw (overwriting memory beyond the
stack). Also, in general, as code evolves it is easy to lose track of
how big a VLA can get. Thus, we can end up having runtime failures
that are hard to debug. As part of the directive[1] to remove all VLAs
from the kernel, and build with -Wvla.
Currently driver is using a VLA declared using the number of descriptors. This
array is used to store integer values and is later used as an argument to
`gpiod_set_array_value_cansleep()` This can be avoided by using
`kmalloc_array()` to allocate memory for the array of integer values. Memory is
free'd before return from function.
>From the code it appears that it is safe to sleep so we can use GFP_KERNEL
(based _cansleep() suffix of function `gpiod_set_array_value_cansleep()`.
It can be expected that this patch will result in a small increase in overhead
due to the use of `kmalloc_array()`
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ff178981bd5fd1667f373098740cb1c6d6efa1ba ]
Respect the actual clock for mmc debugfs to help better debug
the hardware.
mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz,
actual 135475200HZ div = 0)
cat /sys/kernel/debug/mmc0/ios
clock: 150000000 Hz
actual clock: 135475200 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 9 (mmc HS200)
signal voltage: 0 (1.80 V)
driver type: 0 (driver type B)
Cc: Xiao Yao <xiaoyao@rock-chips.com>
Cc: Ziyuan <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fc2a69f3903dfd97cd47f593e642b47918c949df ]
In the func drm_atomic_set_crtc_for_plane, with the current code,
if crtc of the plane_state and crtc passed as argument to the func
are same, entire func will executed in vein.
It will get state of crtc and clear and set the bits in plane_mask.
All these steps are not required for same old crtc.
Ideally, we should do nothing in this case, this patch handles the same,
and causes the program to return without doing anything in such scenario.
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1525326572-25854-1-git-send-email-satendra.t@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e1b7f11b37def5f3021c06e8c2b4953e099357aa ]
Those are all false-positives that appear with smatch when building for
arm:
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
Get rid of them by adding explicit forced casts.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8bfc218d0ebbabcba8ed2b8ec1831e0cf1f71629 ]
Add missing clearing of the previous value when setting rising
temperature threshold.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
