summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3Stephen Rothwell
Also some min -> mint_t conversion. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/charStephen Rothwell
Also a couple of min -> min_t changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/blockStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: The lv1_ routines have u64 parametersStephen Rothwell
We just fix up the reference parameters as the others are dealt with by arithmetic promotion rules and don't cause warnings. This removes warnings like this: arch/powerpc/platforms/ps3/interrupt.c:327: warning: passing argument 1 of 'lv1_construct_event_receive_port' from incompatible pointer type Also, these: drivers/ps3/ps3-vuart.c:462: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type drivers/ps3/ps3-vuart.c:592: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc: Cleanup from l64 to ll64 change drivers/scsiStephen Rothwell
This is a powerpc specific driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits) b44: GFP_DMA skb should not escape from driver korina: do not use IRQF_SHARED with IRQF_DISABLED korina: do not stop queue here korina: fix handling tx_chain_tail korina: do tx at the right position korina: do schedule napi after testing for it korina: rework korina_rx() for use with napi korina: disable napi on close and restart korina: reset resource buffer size to 1536 korina: fix usage of driver_data bnx2x: First slow path interrupt race bnx2x: MTU Filter bnx2x: Indirection table initialization index bnx2x: Missing brackets bnx2x: Fixing the doorbell size bnx2x: Endianness issues bnx2x: VLAN tagged packets without VLAN offload bnx2x: Protecting the link change indication bnx2x: Flow control updated before reporting the link bnx2x: Missing mask when calculating flow control ...
2009-01-15Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX hwmon: (abituguru3) Match partial DMI board name strings hwmon: Add a driver for the ADT7475 hardware monitoring chip hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs hwmon: (k8temp) Warn about fam F rev F errata
2009-01-15drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y buildDavid Brownell
Carry out the PM-routine interface change in the USB OTG pathway. This was omitted from the earlier interface-change patch by mistake. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hp_accel: do not call ACPI from invalid contextPavel Machek
The LED on HP notebooks is connected through ACPI. That unfortunately means that it needs to be delayed by using schedule_work() to avoid calling the ACPI interpreter from an invalid context. [akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it] Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15lis3lv02d: merge with leds hp diskEric Piel
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hwmon: applesmc: fix light sensor readings on newer MacBooksAlex Murray
The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later) changed to report 10 bytes instead the earlier 6, and the sensor encoding subsequently changed. As a result, the reported light sensors readings are much too low. Via experiments leading up to this patch, it seems only the ALV0 is reporting data, and the most useful value therein is a 10-bit big-endian value at offset 6. This suggests that a new protocol was added as a backward-compatible replacement on top of the old one. This patch makes applesmc report the improved light sensor reading for the new machines, on a scale in conformance with earlier ones. Signed-off-by: Alex Murray <murray.alex@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15nbd: do not allow two clients at the same timePavel Machek
Two nbd-clients at same time are bad idea, and cause WARN_ON from nbd in 2.6.28-rc7 from sysfs_add_one. This simply prevents that from happening. To reproduce: cat /dev/zero | head -c 10000000 > /tmp/delme.fstest.fs nbd-server 9100 -l /anyone.can.connect > /tmp/delme.fstest.fs & sleep 1 nbd-client localhost 9100 /dev/nd0 & nbd-client localhost 9100 /dev/nd0 & Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15synclink_gt: enable RI interruptPaul Fulghum
- Enable ring indicator interrupt. - Remove vendor specific CVS version tags. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15sgi-xp: eliminate false detection of no heartbeatDean Nelson
After XPC has been up and running on multiple partitions for any length of time, if XPC on one of the partitions is stopped and restarted (either by a rmmod/insmod or a system restart), it is possible for the XPCs running on the other partitions to falsely detect a lack of heartbeat from the XPC that was just restarted. This false detection will occur if the restarted XPC comes up within the five-seconds preceding one of the other XPC's heartbeat check (which occurs once every twenty seconds). The detection of no heartbeat results in the detecting XPC deactivating from the just restarted XPC. The only remedy is to restart one of the XPCs and hope that one doesn't hit this five-second window on any of the other partitions. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15rtc: rtc-twl4030 don't mask alarm interrupts on shutdownMatti Halme
A triggering RTC alarm should be able to power on a device that has been powered off. This patch enables that on twl4030 by not masking the alarm interrupt at shutdown. Signed-off-by: Matti Halme <matti.halme@nokia.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15rtc-pxa: fix build failureAntonio Ospite
Fix these build errors: CC drivers/rtc/rtc-pxa.o drivers/rtc/rtc-pxa.c: In function `pxa_rtc_init': drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa27x' drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa3xx' Signed-off-by: Antonio Ospite <ao2@openezx.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15rtc: tw4030 add alarm/update interfacesAlessandro Zummo
- implement alarm_irq_enable - return correct error code when registering fails [dbrownell@users.sourceforge.net: build fixes, force 1/sec irqs] Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: rtc-linux@googlegroups.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15sysrq: add commentary on why we use the console loglevel over using KERN_EMERGAndy Whitcroft
Add an explanitory comment as to why we modify the kernel console loglevel rather than simply moving sysrq messages to KERN_EMERG level. Signed-off-by: Andy Whitcroft <apw@canonical.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15video/framebuffer: fix bug: jpegview cannot work on framebuffer device other ↵Michael Hennerich
than 16BPP Force fb_var_screeninfo color format on all Blackfin Framebuffer Drivers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15gpio: fix probe() error return in gpio driver probesBen Dooks
A number of drivers in drivers/gpio return -ENODEV when confronted with missing setup parameters such as the platform data. However, returning -ENODEV causes the driver layer to silently ignore the driver as it assumes the probe did not find anything and was only speculative. To make life easier to discern why a driver is not being attached, change to returning -EINVAL, which is a better description of the fact that the driver data was not valid. Also add a set of dev_dbg() statements to the error paths to provide an better explanation of the error as there may be more that one point in the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15atmel_spi: allow transfer when max_speed_hz = 0Stanislaw Gruszka
For some reason I have to slowdown clock to touchscreen device. In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow as possible and divider is set to maximum value. But in atmel_spi_transfer() function is check against not zero max_speed_hz with EINVAL returned. Probably driver should setup divider for each transfer based on transfer->speed_hz value, but I think that would be not necessary overhead as all used devices have constant clock. Below patch works fine for me. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15atmel_serial: fix flow control bugItai Levi
Fix the following problem, related to hardware flow control (CTS/RTS): Transmitting while CTS line is asserted in DMA mode, due to not checking for tx-stopped condition. We found these problems while testing the UARTs with hardware flow-control. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: "Andrew Victor" <avictor.za@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15b44: GFP_DMA skb should not escape from driverEric Dumazet
b44 chip has some hardware limitations, that need GFP_DMA bounce buffers in some situations. In order to not deplete DMA zone, we should keep allocated GFP_DMA skb only for driver use. At rx time, we copy such skb to newly allocated skb, reusing existing copybreak infrastructure. On machines with low amount of memory, all skb meet the hardware limitation, so no copy is needed. We detect this situation using a new device flag, set to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb(). Previously allocated skb, even outside from DMA zone will then be recycled, to have minimal impact on DMA zone use. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Tested-by: Ionut Leonte <ionut.leonte@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probeAlistair John Strachan
When CONFIG_DMI is not enabled, dmi detection should flag that no board could be detected (err=1) rather than another error condition (err<0). This fixes the fallback to manual probing for all motherboards, even those without DMI strings, when CONFIG_DMI=n. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAXAlistair John Strachan
Switch the IN9 32X MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Paul Hartman <paul.hartman+gentoo@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (abituguru3) Match partial DMI board name stringsAlistair John Strachan
The switch-over to using DMI board strings to identify abituguru3 compatible mainboards works most of the time, but sometimes the vendor has substantially modified the board string between BIOS revisions. We have found that the vendor chipset identification string (provided in brackets) changes frequently and is of no use to us. The rest of the board string sometimes changes in subtle ways, e.g. whitespace or variations in capitalization. The new comparison code checks only a part of the supplied DMI board string, trimming the bracketed content, whitespace, and ignoring case as necessary. This fixes a bug where an IP35 Pro running an early BIOS would not be detected without the force=1 module parameter, and also speculatively fixes other similiar issues. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Reported-by: Nick Pasich <NewsLetters@nickandbarb.net> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: Add a driver for the ADT7475 hardware monitoring chipJordan Crouse
Hwmon driver for the ADT7475 chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUsAndreas Herrmann
Current Temperature for K8 RevG desktop CPUs is a "normalized value" which can be below ambient temperature. As a consequence lots of RevG systems report temperatures like: $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +17 C Core0 Temp: +3 C Core1 Temp: +21 C Core1 Temp: +5 C being quite below ambient temperature. There are even reports of negative temperature values. This patch corrects the temperature reporting of k8temp for RevG desktop CPUs. Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUsAndreas Herrmann
Meaning of ThermSenseCoreSel bit was inverted beginning with K8 RevF. That means with current driver temp1/temp2 belong to core 1 and temp3/temp4 belong to core 0 on a K8 RevF/RevG CPU. This patch ensures that temp1/temp2 always belong to core 0 and temp3/temp4 to core 1 for all K8 revisions. Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hwmon: (k8temp) Warn about fam F rev F errataAndreas Herrmann
Add warning about wrong CPU temperature readouts on all fam F rev F. The allowed combinations of processors ensure that all processors in a multisocket system have similar characteristics, e.g. (1) provide temperature sensor interface (>=RevC && <RevF) (2) are affected by erratum #141 (>=RevF) Thus it is sufficient to check the revision of the boot CPU. For "mixed silicon support" refer to "Revision Guide for AMD Athlon 64 and AMD Opteron Processors" (RevA-E) and "Revision Guide for AMD NPT Family 0Fh Processors" (RefF-G). Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-15hso serial throttled tty kref fix.Denis Joseph Barrow
This patch is for Alan Cox as it related to the tty layer. Hopefully the hso driver is again relatively stable with this fix. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15tty: Fix double grabbing of a spinlockDenis Joseph Barrow
The HSO changes for kref introduced a recursive spinlock take. All functions which call put_rxbuf_data already have serial->serial_lock grabbed. [Comment to code added-AC] Signed-off-by: Denis Joseph Barrow <D.Barrow@option.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15tty: Fix a kref leak in the HSO driver on re-openAlan Cox
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15ftdi_sio: fix kref leakJim Paris
Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to ftdi_sio, but missed tty_kref_put at one exit point in ftdi_process_read. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15When a break signal is detected, the next character should be ignored.Mischa Jonker
This was not implemented correctly for the pnx8xxx_uart driver. [From further discussion: Correct, you can look to it as two separate bugs: a) the next character is not ignored while it should; b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't. Both bugs prevent correct break signal handling (and therefore correct behaviour of the magic SysRq key). Bug b didn't cause too much trouble earlier because in most situations the status bits are all zero; for this case they unfortunately aren't. ] Signed-off-by: Mischa Jonker <mischa.jonker@nxp.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15serial: Add SupraExpress 336i PnP Voice ModemDaniel Gagnon
Add SupraExpress 336i PnP Voice Modem Tested and working with the following device: (output from lspnp -v) 01:01.00 SUP1381 (unknown) state = active io 0x2f8-0x2ff irq 3 Signed-off-by: Daniel Gagnon <daniel.gagnon@yahoo.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-158250_pci: add support for netmos 9835 IBM devicesJiri Slaby
Most of netmos 9835 hardware is handled by parport-serial. IBM introduces a device which doesn't have any parallel ports and have screwed subdevice PCI id (not corresponding to port numbers). Handle this device (9710:9835 1014:0299) properly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15tty: Fix race in the flush for some ldiscsAlan Cox
If you issue an ioctl to flush a tty as the line discipline is changing or otherwise unplugged you can get a crash. The bug is very old but the rest of the BKL lock dropping and some very "good" luck on Ingo's part caught an example. Use the correct ldisc_ref form so that we wait for the ldisc change to complete and then flush Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15korina: do not use IRQF_SHARED with IRQF_DISABLEDPhil Sutter
As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared IRQs". Since these IRQs' values are hardcoded and my test system doesn't show any shared use of IRQs at all, rather make them non-shared than non-disabled. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do not stop queue herePhil Sutter
Apparently this doesn't make sense. Otherwise the queue gets disabled as soon as it's getting empty and can only be resurrected by a driver restart. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: fix handling tx_chain_tailPhil Sutter
Originally this must have been a rewrite error when introducing 'chain_index'. But the original driver did not use the previous chain item everywhere: when altering the address tx_chain_tail points to, it should move forward, not backwards. Also this is not an "index" but rather the penultimate element in the chain, so rename it accordingly. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do tx at the right positionPhil Sutter
Triggering TX before the write to the DMA status mask register leads to transferring packets with maximum payload no matter what the actual packet size is. While here, also trigger RX scheduling after writing the DMA status mask register, like it was in the original driver before it was sent upstream. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do schedule napi after testing for itPhil Sutter
The called netif_rx_schedule() does all the work for us: - it checks the return value of netif_rx_schedule_prep() and - if everything is ok calls __netif_rx_schedule(). Before this change, the driver received absolutely nothing. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: rework korina_rx() for use with napiPhil Sutter
This function needs an early exit condition to function properly, or else caller assumes napi workload wasn't enough to handle all received packets and korina_rx is called again (and again and again and ...). Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: disable napi on close and restartPhil Sutter
Without this the driver will crash when the NIC is being restarted. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: reset resource buffer size to 1536Phil Sutter
The new value is the one used in the external patch before and allows at least a standard MTU of 1500 to be handled correctly. Impact of this change gets visible when bigger packets are to be received, issuing: | ping -s 492 <IP> and bigger payload sized led to 100% packet loss. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: fix usage of driver_dataPhil Sutter
Using platform_set_drvdata() here makes no sense, since the driver_data field has already been filled with valuable data (i.e. the MAC address). Also having driver_data point to the net_device is rather pointless since struct korina_device contains an apropriate field for it. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: First slow path interrupt raceEilon Greenstein
The "read for interrupts" flag must be set before enabling slow-path interrupts as well (and not just before fast-path interrupts) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: MTU FilterEilon Greenstein
Too big packets could pass due to wrong filter size Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Indirection table initialization indexEilon Greenstein
Wrong initialization of the multi-queue indirection table - it should be using the function and not the port index Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>