summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-01-05Merge commit 'v3.2' into rt-3.2-rt9v3.2-rt9Clark Williams
2012-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fix CAN MAINTAINERS SCM tree type mwifiex: fix crash during simultaneous scan and connect b43: fix regression in PIO case ath9k: Fix kernel panic in AR2427 in AP mode CAN MAINTAINERS update net: fsl: fec: fix build for mx23-only kernel sch_qfq: fix overflow in qfq_update_start() Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
2012-01-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03Revert "rtc: Disable the alarm in the hardware"Linus Torvalds
This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: stable@kernel.org # for the versions that applied this Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03mwifiex: fix crash during simultaneous scan and connectAmitkumar Karwar
If 'iw connect' command is fired when driver is already busy in serving 'iw scan' command, ssid specific scan operation for connect is skipped. In this case cmd wait queue handler gets called with no command in queue (i.e. adapter->cmd_queued = NULL). This patch adds a NULL check in mwifiex_wait_queue_complete() routine to fix crash observed during simultaneous scan and assoc operations. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03b43: fix regression in PIO caseGuennadi Liakhovetski
This patch fixes the regression, introduced by commit 17030f48e31adde5b043741c91ba143f5f7db0fd From: Rafał Miłecki <zajec5@gmail.com> Date: Thu, 11 Aug 2011 17:16:27 +0200 Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw in PIO case. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03ath9k: Fix kernel panic in AR2427 in AP modeMohammed Shafi Shajakhan
don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: stable@kernel.org Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03net: fsl: fec: fix build for mx23-only kernelWolfram Sang
If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03Merge commit 'v3.2-rc7' into rt-3.2-rc7-rt9Clark Williams
2012-01-03drm/radeon/kms/atom: fix possible segfault in pm setupAlexander Müller
If we end up with no power states, don't look up current vddc. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44130 agd5f: fix patch formatting Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-02Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt/device: Fix auxdata matching to handle entries without a name override
2012-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix timeout calculation ipvs: try also real server with port 0 in backup server skge: restore rx multicast filter on resume and after config changes mlx4_en: nullify cq->vector field when closing completion queue
2011-12-31gspca: Fix falling back to lower isoc alt settingsMauro Carvalho Chehab
The current gspca core code has a regression where it no longer properly falls back to lower alt settings when there is not enough bandwidth. This causes many iso based usb-1 cameras to not work when plugged into a usb2 hub or a sandybridge chipset motherboard! This patch fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-30skge: restore rx multicast filter on resume and after config changesFlorian Zumbiehl
Restore skge hardware registers for multicast filtering to their appropriate values after system resume and after hardware restarts that are done when changing certain settings. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30mlx4_en: nullify cq->vector field when closing completion queueYevgeny Petrilin
Caused loss of connectivity when changing ring size. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7237/1: PL330: Fix driver freeze ARM: 7197/1: errata: Remove SMP dependency for erratum 751472 ARM: 7196/1: errata: Remove SMP dependency for erratum 720789 ARM: 7220/1: mmc: mmci: Fixup error handling for dma ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
2011-12-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: plat-orion: make gpiochip label unique enable uncompress log on cpuimx35sd cpuimx35: fix touchscreen support cpuimx35sd: fix Kconfig clock-imx35: fix reboot in internal boot mode dma: MX3_IPU fix depends imx_v4_v5_defconfig: update default configuration cpuimx25sd: fix Kconfig arm/imx: fix cpufreq section mismatch ARM:imx:fix pwm period value ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3
2011-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix retrieving number of buttons Input: sentelic - release mutex upon register write failure
2011-12-30Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
* git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2) watchdog: hpwdt: Changes to handle NX secure bit in 32bit path watchdog: sp805: Fix section mismatch in ID table. watchdog: move coh901327 state holders
2011-12-29Merge branch 'iommu/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Initialize domain->handler in iommu_domain_alloc()
2011-12-29gspca: Fix bulk mode cameras no longer working (regression fix)Hans de Goede
The new iso bandwidth calculation code accidentally has broken support for bulk mode cameras. This has broken the following drivers: finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x, stv0680, vicam. Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam cams. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-29Input: sentelic - fix retrieving number of buttonsTai-hwa Liang
Fixing wrong register offset which is used to retrieve the number of buttons attached to the hardware. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-28kconfig-disable-a-few-options-rt.patchThomas Gleixner
Disable stuff which is known to have issues on RT Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28acpi-gpe-use-wait-simple.patchThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28dm: Make rt awareThomas Gleixner
Use the BUG_ON_NORT variant for the irq_disabled() checks. RT has interrupts legitimately enabled here as we cant deadlock against the irq thread due to the "sleeping spinlocks" conversion. Reported-by: Luis Claudio R. Goncalves <lclaudio@uudg.org> Cc: stable-rt@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28scsi-fcoe-rt-aware.patchThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28sysrq: Allow immediate Magic SysRq output for PREEMPT_RT_FULLFrank Rowand
Add a CONFIG option to allow the output from Magic SysRq to be output immediately, even if this causes large latencies. If PREEMPT_RT_FULL, printk() will not try to acquire the console lock when interrupts or preemption are disabled. If the console lock is not acquired the printk() output will be buffered, but will not be output immediately. Some drivers call into the Magic SysRq code with interrupts or preemption disabled, so the output of Magic SysRq will be buffered instead of printing immediately if this option is not selected. Even with this option selected, Magic SysRq output will be delayed if the attempt to acquire the console lock fails. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Link: http://lkml.kernel.org/r/4E7CEF60.5020508@am.sony.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28kgdb/serial: Short term workaroundJason Wessel
On 07/27/2011 04:37 PM, Thomas Gleixner wrote: > - KGDB (not yet disabled) is reportedly unusable on -rt right now due > to missing hacks in the console locking which I dropped on purpose. > To work around this in the short term you can use this patch, in addition to the clocksource watchdog patch that Thomas brewed up. Comments are welcome of course. Ultimately the right solution is to change separation between the console and the HW to have a polled mode + work queue so as not to introduce any kind of latency. Thanks, Jason.
2011-12-28ARM: at91: tclib: Default to tclib timer for RTThomas Gleixner
RT is not too happy about the shared timer interrupt in AT91 devices. Default to tclib timer for RT. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28rt: Improve the serial console PASS_LIMITIngo Molnar
Beyond the warning: drivers/tty/serial/8250.c:1613:6: warning: unused variable ‘pass_counter’ [-Wunused-variable] the solution of just looping infinitely was ugly - up it to 1 million to give it a chance to continue in some really ugly situation. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28drivers-tty-fix-omap-lock-crap.patchThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28serial: 8250: Call flush_to_ldisc when the irq is threadedIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-28serial: 8250: Clean up the locking for -rtIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28md: raid5: Make raid5_percpu handling RT awareThomas Gleixner
__raid_run_ops() disables preemption with get_cpu() around the access to the raid5_percpu variables. That causes scheduling while atomic spews on RT. Serialize the access to the percpu data with a lock and keep the code preemptible. Reported-by: Udo van den Heuvel <udovdh@xs4all.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Udo van den Heuvel <udovdh@xs4all.nl>
2011-12-28USB: Fix the mouse problem when copying large amounts of dataWu Zhangjin
When copying large amounts of data between the USB storage devices and the hard disk, the USB mouse will not work, this patch fixes it. [NOTE: This problem have been found in the Loongson family machines, not sure whether it is producible on other platforms] Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
2011-12-28drivers: net: gianfar: Make RT awareThomas Gleixner
The adjust_link() disables interrupts before taking the queue locks. On RT those locks are converted to "sleeping" locks and therefor the local_irq_save/restore must be converted to local_irq_save/restore_nort. Reported-by: Xianghua Xiao <xiaoxianghua@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Xianghua Xiao <xiaoxianghua@gmail.com>
2011-12-28drivers/net: vortex fix locking issuesSteven Rostedt
Argh, cut and paste wasn't enough... Use this patch instead. It needs an irq disable. But, believe it or not, on SMP this is actually better. If the irq is shared (as it is in Mark's case), we don't stop the irq of other devices from being handled on another CPU (unfortunately for Mark, he pinned all interrupts to one CPU). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> drivers/net/ethernet/3com/3c59x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-28drivers/net: fix livelock issuesThomas Gleixner
Preempt-RT runs into a live lock issue with the NETDEV_TX_LOCKED micro optimization. The reason is that the softirq thread is rescheduling itself on that return value. Depending on priorities it starts to monoplize the CPU and livelock on UP systems. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28tty: Do not disable interrupts in put_ldisc on -rtThomas Gleixner
Fixes the following on PREEMPT_RT: BUG: sleeping function called from invalid context at kernel/rtmutex.c:684 in_atomic(): 0, irqs_disabled(): 1, pid: 9116, name: sshd Pid: 9116, comm: sshd Not tainted 2.6.31-rc6-rt2 #6 Call Trace: [<ffffffff81034a4f>] __might_sleep+0xec/0xee [<ffffffff812fbc6d>] rt_spin_lock+0x34/0x75 [ffffffff81064a83>] atomic_dec_and_spin_lock+0x36/0x54 [<ffffffff811df7c7>] put_ldisc+0x57/0xa6 [<ffffffff811dfb87>] tty_ldisc_hangup+0xe7/0x19f [<ffffffff811d9224>] do_tty_hangup+0xff/0x319 [<ffffffff811d9453>] tty_vhangup+0x15/0x17 [<ffffffff811e1263>] pty_close+0x127/0x12b [<ffffffff811dac41>] tty_release_dev+0x1ad/0x4c0 .... Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28usb: Use local_irq_*_nort() variantsSteven Rostedt
[ tglx: Now that irqf_disabled is dead we should kill that ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28input: gameport: Do not disable interrupts on PREEMPT_RTIngo Molnar
Use the _nort() primitives. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28infiniband: Mellanox IB driver patch use _nort() primitivesSven-Thorsten Dietrich
Fixes in_atomic stack-dump, when Mellanox module is loaded into the RT Kernel. Michael S. Tsirkin <mst@dev.mellanox.co.il> sayeth: "Basically, if you just make spin_lock_irqsave (and spin_lock_irq) not disable interrupts for non-raw spinlocks, I think all of infiniband will be fine without changes." Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28ide: Do not disable interrupts for PREEMPT-RTIngo Molnar
Use the local_irq_*_nort variants. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28ata: Do not disable interrupts in ide code for preempt-rtSteven Rostedt
Use the local_irq_*_nort variants. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28hwlatdetect.patchCarsten Emde
Jon Masters developed this wonderful SMI detector. For details please consult Documentation/hwlat_detector.txt. It could be ported to Linux 3.0 RT without any major change. Signed-off-by: Carsten Emde <C.Emde@osadl.org>
2011-12-28ACPI: Convert embedded controller lock to raw spinlockClark Williams
Was seeing multiple "scheduling while atomic" backtraces on the 3.2-rc2-rt5 realtime kernel. This patch converts the spinlock in the ACPI embedded controller structure (curr_lock) to be a raw spinlock. Signed-off-by: Clark Williams <williams@redhat.com> Link: http://lkml.kernel.org/r/20111203093537.7d805f64@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable-rt@vger.kernel.org
2011-12-28acpi: Make gbl_[hardware|gpe]_lock rawThomas Gleixner
These locks are taken in the guts of the idle code and cannot be converted to "sleeping" spinlocks on RT Cc: stable-rt@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-28pci: Use __wake_up_all_locked pci_unblock_user_cfg_access()Thomas Gleixner
The waitqueue is protected by the pci_lock, so we can just avoid to lock the waitqueue lock itself. That prevents the might_sleep()/scheduling while atomic problem on RT Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable-rt@vger.kernel.org
2011-12-28locking-various-init-fixes.patchThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 11:39:35 +0000