summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-06-23Revert "iwlagn: Support new 5000 microcode."Greg Kroah-Hartman
This reverts commit 6f63415fc1b690cb50c2ad48ba6e9e6e88e271b4. It turns out this is not what we want to have happen for the .32 and .33-longterm kernels as it does not work properly at all. This was reported by Gentoo, Arch, and Canonical developers as causing problems for their users: https://bugs.archlinux.org/task/24302 http://bugs.gentoo.org/show_bug.cgi?id=359445 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/796336 Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Gordon Malm <gengor@gentoo.org> Cc: Don Fry <donald.h.fry@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cm64x: fix boot crash on pariscJames Bottomley
commit 9281b16caac1276817b77033c5b8a1f5ca30102c upstream. The old IDE cmd64x checks the status of the CNTRL register to see if the ports are enabled before probing them. pata_cmd64x doesn't do this, which causes a HPMC on parisc when it tries to poke at the secondary port because apparently the BAR isn't wired up (and a non-responding piece of memory causes a HPMC). Fix this by porting the CNTRL register port detection logic from IDE cmd64x. In addition, following converns from Alan Cox, add a check to see if a mobility electronics bridge is the immediate parent and forgo the check if it is (prevents problems on hotplug controllers). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: remove unused definitionsBartlomiej Zolnierkiewicz
commit c754d9b6e04371fb398cdd2f5e77be895126be20 upstream. s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: cmd648_bmdma_stop() fixBartlomiej Zolnierkiewicz
commit 03a849e6ddb604ff6a220b78637ee8e122ffc796 upstream. Clear the primary channel pending interrupt bit instead of the reserved one. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: fix PIO setupBartlomiej Zolnierkiewicz
commit a2bd62207af4be8f5fe815ff90cc309056407829 upstream. Fix incorrect handling of recovery clocks value == 16 resulting in overclocked recovery timings & potentially underclocked active timings. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23md/raid5: fix raid5_set_bi_hw_segmentsNamhyung Kim
commit 9b2dc8b665932a8e681a7ab3237f60475e75e161 upstream. The @bio->bi_phys_segments consists of active stripes count in the lower 16 bits and processed stripes count in the upper 16 bits. So logical-OR operator should be bitwise one. This bug has been present since 2.6.27 and the fix is suitable for any -stable kernel since then. Fortunately the bad code is only used on error paths and is relatively unlikely to be hit. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23md: check ->hot_remove_disk when removing diskNamhyung Kim
commit 01393f3d5836b7d62e925e6f4658a7eb22b83a11 upstream. Check pers->hot_remove_disk instead of pers->hot_add_disk in slot_store() during disk removal. The linear personality only has ->hot_add_disk and no ->hot_remove_disk, so that removing disk in the array resulted to following kernel bug: $ sudo mdadm --create /dev/md0 --level=linear --raid-devices=4 /dev/loop[0-3] $ echo none | sudo tee /sys/block/md0/md/dev-loop2/slot BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD c9f5d067 PUD 8575a067 PMD 0 Oops: 0010 [#1] SMP CPU 2 Modules linked in: linear loop bridge stp llc kvm_intel kvm asus_atk0110 sr_mod cdrom sg Pid: 10450, comm: tee Not tainted 3.0.0-rc1-leonard+ #173 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff880085757df0 EFLAGS: 00010282 RAX: ffffffffa00168e0 RBX: ffff8800d1431800 RCX: 000000000000006e RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff88008543c000 RBP: ffff880085757e48 R08: 0000000000000002 R09: 000000000000000a R10: 0000000000000000 R11: ffff88008543c2e0 R12: 00000000ffffffff R13: ffff8800b4641000 R14: 0000000000000005 R15: 0000000000000000 FS: 00007fe8c9e05700(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b4502000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process tee (pid: 10450, threadinfo ffff880085756000, task ffff8800c9f08000) Stack: ffffffff8138496a ffff8800b4641000 ffff88008543c268 0000000000000000 ffff8800b4641000 ffff88008543c000 ffff8800d1431868 ffffffff81a78a90 ffff8800b4641000 ffff88008543c000 ffff8800d1431800 ffff880085757e98 Call Trace: [<ffffffff8138496a>] ? slot_store+0xaa/0x265 [<ffffffff81384bae>] rdev_attr_store+0x89/0xa8 [<ffffffff8115a96a>] sysfs_write_file+0x108/0x144 [<ffffffff81106b87>] vfs_write+0xb1/0x10d [<ffffffff8106e6c0>] ? trace_hardirqs_on_caller+0x111/0x135 [<ffffffff81106cac>] sys_write+0x4d/0x77 [<ffffffff814fe702>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff880085757df0> CR2: 0000000000000000 ---[ end trace ba5fc64319a826fb ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23CPUFREQ: Remove cpufreq_stats sysfs entries on module unload.Dave Jones
commit 13f067537f34456443f61c950cd6dc37d1d5f3ee upstream. cpufreq_stats leaves behind its sysfs entries, which causes a panic when something stumbled across them. (Discovered by unloading cpufreq_stats while powertop was loaded). Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: xhci - fix interval calculation for FS isoc endpointsDmitry Torokhov
commit cd3c18ba2fac14b34d03cae111f215009735ea06 upstream. Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driverSteffen Sledz
commit a26d31cef06f43a76327c21235e75450869df2b8 upstream. E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: core: Tolerate protocol stall during hub and port status readLibor Pechacek
commit 3824c1ddaf744be44b170a335332b9d6afe79254 upstream. Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23drm/radeon/kms: fix for radeon on systems >4GB without hardware iommuDaniel Haid
commit 62fff811d73095bd95579d72f558f03c78f7914a upstream. On my x86_64 system with >4GB of ram and swiotlb instead of a hardware iommu (because I have a VIA chipset), the call to pci_set_dma_mask (see below) with 40bits returns an error. But it seems that the radeon driver is designed to have need_dma32 = true exactly if pci_set_dma_mask is called with 32 bits and false if it is called with 40 bits. I have read somewhere that the default are 32 bits. So if the call fails I suppose that need_dma32 should be set to true. And indeed the patch fixes the problem I have had before and which I had described here: http://choon.net/forum/read.php?21,106131,115940 Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007Hans de Goede
commit 6a574b5b9b186e28abd3e571dfd1700c5220b510 upstream. I found this while figuring out why gnome-shell would not run on my Asus EeeBox PC EB1007. As a standalone "pc" this device cleary does not have an internal panel, yet it claims it does. Add a quirk to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23PCI: Set PCIE maxpayload for card during hotplug insertionJordan_Hargrave@Dell.com
commit e522a7126c7c144a1dd14c6f217ac31e71082b1d upstream. The following patch sets the MaxPayload setting to match the parent reading when inserting a PCIE card into a hotplug slot. On our system, the upstream bridge is set to 256, but when inserting a card, the card setting defaults to 128. As soon as I/O is performed to the card it starts receiving errors since the payload size is too small. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23ath9k: set 40 Mhz rate only if hw is configured in ht40Rajkumar Manoharan
commit 41e2b05b9598d6bdf91fc20280bfc538d853f769 upstream. Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23Fix oops caused by queue refcounting failureJames Bottomley
commit e73e079bf128d68284efedeba1fbbc18d78610f9 upstream. In certain circumstances, we can get an oops from a torn down device. Most notably this is from CD roms trying to call scsi_ioctl. The root cause of the problem is the fact that after scsi_remove_device() has been called, the queue is fully torn down. This is actually wrong since the queue can be used until the sdev release function is called. Therefore, we add an extra reference to the queue which is released in sdev->release, so the queue always exists. Reported-by: Parag Warudkar <parag.lkml@gmail.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23nbd: limit module parameters to a sane valueNamhyung Kim
commit 3b2710824e00d238554c13b5add347e6c701ab1a upstream. The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<ffffffff8115aa08>] [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [<ffffffff812e8f6e>] ? device_add+0x4f1/0x5e4 [<ffffffff812e7a80>] ? dev_set_name+0x41/0x43 [<ffffffff8115ab6a>] sysfs_create_group+0x13/0x15 [<ffffffff810b857e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff811ee58b>] blk_register_queue+0x4c/0xfd [<ffffffff811f3bdf>] add_disk+0xe4/0x29c [<ffffffffa007e2ab>] nbd_init+0x2ab/0x30d [nbd] [<ffffffffa007e000>] ? 0xffffffffa007dfff [<ffffffff8100020f>] do_one_initcall+0x7f/0x13e [<ffffffff8107ab0a>] sys_init_module+0xa1/0x1e3 [<ffffffff814f3542>] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP <ffff8801009f1de8> ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23fix duplicate removal on error path in scsi_sysfs_add_sdevAlan Stern
commit ee37e09d81a4acf328f68189af12f116401f8c0f upstream. This patch (as1335) fixes a bug in scsi_sysfs_add_sdev(). Its callers always remove the device if anything goes wrong, so it should never remove the device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23fix refcounting bug in scsi_get_host_devAlan Stern
commit d5469119f0098881ab7f991990ef4f81ef13a194 upstream. This patch (as1334) fixes a bug in scsi_get_host_dev(). It incorrectly calls get_device() on the new device's target. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23fix memory leak in scsi_report_lun_scanAlan Stern
commit 75f8ee8e01a6c96652f27da40d4bdac9e2e485f0 upstream. This patch (as1333) fixes a bug in scsi_report_lun_scan(). If a newly-allocated device can't be used, it should be deleted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23PCI: Add quirk for setting valid class for TI816X EndpointHemant Pedanekar
commit 63c4408074cbcc070ac17fc10e524800eb9bd0b0 upstream. TI816X (common name for DM816x/C6A816x/AM389x family) devices configured to boot as PCIe Endpoint have class code = 0. This makes kernel PCI bus code to skip allocating BARs to these devices resulting into following type of error when trying to enable them: "Device 0000:01:00.0 not available because of resource collisions" The device cannot be operated because of the above issue. This patch adds a ID specific (TI VENDOR ID and 816X DEVICE ID based) 'early' fixup quirk to replace class code with PCI_CLASS_MULTIMEDIA_VIDEO as class. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23brd: handle on-demand devices correctlyNamhyung Kim
commit af46566885a373b0a526932484cd8fef8de7b598 upstream. When finding or allocating a ram disk device, brd_probe() did not take partition numbers into account so that it can result to a different device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4 for simplicity) : $ sudo modprobe brd max_part=15 $ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 $ sudo mknod /dev/ram4 b 1 64 $ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256 256+0 records in 256+0 records out 1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s namhyung@leonhard:linux$ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 brw-r--r-- 1 root root 1, 64 2011-05-25 15:45 /dev/ram4 brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64 After this patch, /dev/ram4 - instead of /dev/ram64 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that RAMDISK_MAJOR can address. It does not need to be limited by partition numbers unless 'rd_nr' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23brd: limit 'max_part' module param to DISK_MAX_PARTSNamhyung Kim
commit 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 upstream. The 'max_part' parameter controls the number of maximum partition a brd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe brd max_part=100000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae PGD 7af1067 PUD 7b19067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: brd(+) Pid: 44, comm: insmod Tainted: G W 2.6.39-qemu+ #158 Bochs Bochs RIP: 0010:[<ffffffff81110a9a>] [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP: 0018:ffff880007b15d78 EFLAGS: 00000286 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063 FS: 0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980) Stack: ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a 0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000 Call Trace: [<ffffffff81143c0a>] kobject_add_internal+0xdf/0x1a0 [<ffffffff81143da1>] kobject_add_varg+0x41/0x50 [<ffffffff81143e6b>] kobject_add+0x64/0x66 [<ffffffff8113bbe7>] blk_register_queue+0x5f/0xb8 [<ffffffff81140f72>] add_disk+0xdf/0x289 [<ffffffffa00040df>] brd_init+0xdf/0x1aa [brd] [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff8108516c>] sys_init_module+0x9c/0x1dc [<ffffffff812ff4bb>] system_call_fastpath+0x16/0x1b Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30 8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89 RIP [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP <ffff880007b15d78> CR2: 0000000000000058 ---[ end trace aebb1175ce1f6739 ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23dm table: reject devices without request fnsMilan Broz
commit f4808ca99a203f20b4475601748e44b25a65bdec upstream. This patch adds a check that a block device has a request function defined before it is used. Otherwise, misconfiguration can cause an oops. Because we are allowing devices with zero size e.g. an offline multipath device as in commit 2cd54d9bedb79a97f014e86c0da393416b264eb3 ("dm: allow offline devices") there needs to be an additional check to ensure devices are initialised. Some block devices, like a loop device without a backing file, exist but have no request function. Reproducer is trivial: dm-mirror on unbound loop device (no backing file on loop devices) dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0" and mirror resync will immediatelly cause OOps. BUG: unable to handle kernel NULL pointer dereference at (null) ? generic_make_request+0x2bd/0x590 ? kmem_cache_alloc+0xad/0x190 submit_bio+0x53/0xe0 ? bio_add_page+0x3b/0x50 dispatch_io+0x1ca/0x210 [dm_mod] ? read_callback+0x0/0xd0 [dm_mirror] dm_io+0xbb/0x290 [dm_mod] do_mirror+0x1e0/0x748 [dm_mirror] Signed-off-by: Milan Broz <mbroz@redhat.com> Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23cpuidle: menu: fixed wrapping timers at 4.294 secondsTero Kristo
commit 7467571f4480b273007517b26297c07154c73924 upstream. Cpuidle menu governor is using u32 as a temporary datatype for storing nanosecond values which wrap around at 4.294 seconds. This causes errors in predicted sleep times resulting in higher than should be C state selection and increased power consumption. This also breaks cpuidle state residency statistics. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23i8k: Avoid lahf in 64-bit codeLuca Tettamanti
commit bc1f419c76a2d6450413ce4349f4e4a07be011d5 upstream. i8k uses lahf to read the flag register in 64-bit code; early x86-64 CPUs, however, lack this instruction and we get an invalid opcode exception at runtime. Use pushf to load the flag register into the stack instead. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Reported-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Cc: Massimo Dal Zotto <dz@debian.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23p54usb: add zoom 4410 usbidChristian Lamparter
commit 9368a9a2378ab721f82f59430a135b4ce4ff5109 upstream. Reported-by: Mark Davis <marked86@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23xhci: Fix full speed bInterval encoding.Sarah Sharp
commit b513d44751bfb609a3c20463f764c8ce822d63e9 upstream. Dmitry's patch dfa49c4ad120a784ef1ff0717168aa79f55a483a USB: xhci - fix math in xhci_get_endpoint_interval() introduced a bug. The USB 2.0 spec says that full speed isochronous endpoints' bInterval must be decoded as an exponent to a power of two (e.g. interval = 2^(bInterval - 1)). Full speed interrupt endpoints, on the other hand, don't use exponents, and the interval in frames is encoded straight into bInterval. Dmitry's patch was supposed to fix up the full speed isochronous to parse bInterval as an exponent, but instead it changed the *interrupt* endpoint bInterval decoding. The isochronous endpoint encoding was the same. This caused full speed devices with interrupt endpoints (including mice, hubs, and USB to ethernet devices) to fail under NEC 0.96 xHCI host controllers: [ 100.909818] xhci_hcd 0000:06:00.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x99, new slot info = 0x38100000 [ 100.909821] xhci_hcd 0000:06:00.0: xhci_check_bandwidth called for udev ffff88011f0ea000 ... [ 100.910187] xhci_hcd 0000:06:00.0: ERROR: unexpected command completion code 0x11. [ 100.910190] xhci_hcd 0000:06:00.0: xhci_reset_bandwidth called for udev ffff88011f0ea000 When the interrupt endpoint was added and a Configure Endpoint command was issued to the host, the host controller would return a very odd error message (0x11 means "Slot Not Enabled", which isn't true because the slot was enabled). Probably the host controller was getting very confused with the bad encoding. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Dmitry Torokhov <dtor@vmware.com> Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com> Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23usb: gadget: rndis: don't test against req->lengthFelipe Balbi
commit 472b91274a6c6857877b5caddb875dcb5ecdfcb8 upstream. composite.c always sets req->length to zero and expects function driver's setup handlers to return the amount of bytes to be used on req->length. If we test against req->length w_length will always be greater than req->length thus making us always stall that particular SEND_ENCAPSULATED_COMMAND request. Tested against a Windows XP SP3. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23usb/gadget: at91sam9g20 fix end point max packet sizeJean-Christophe PLAGNIOL-VILLARD
commit bf1f0a05d472e33dda8e5e69525be1584cdbd03a upstream. on 9g20 they are the same as the 9260 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: gamin_gps: Fix for data transfer problems in native modeHermann Kneissel
commit b4026c4584cd70858d4d3450abfb1cd0714d4f32 upstream. This patch fixes a problem where data received from the gps is sometimes transferred incompletely to the serial port. If used in native mode now all data received via the bulk queue will be forwarded to the serial port. Signed-off-by: Hermann Kneissel <herkne@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: serial: ftdi_sio: adding support for TavIR STK500Benedek László
commit 37909fe588c9e09ab57cd267e98678a17ceda64a upstream. Adding support for the TavIR STK500 (id 0403:FA33) Atmel AVR programmer device based on FTDI FT232RL. Signed-off-by: Benedek László <benedekl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: moto_modem: Add USB identifier for the Motorola VE240.Elizabeth Jennifer Myers
commit 3938a0b32dc12229e76735679b37095bc2bc1578 upstream. Tested on my phone, the ttyUSB device is created and is fully functional. Signed-off-by: Elizabeth Jennifer Myers <elizabeth@sporksirc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23loop: handle on-demand devices correctlyNamhyung Kim
commit a1c15c59feee36267c43142a41152fbf7402afb6 upstream. When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23loop: limit 'max_part' module param to DISK_MAX_PARTSNamhyung Kim
commit 78f4bb367fd147a0e7e3998ba6e47109999d8814 upstream. The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23staging: usbip: fix wrong endian conversionDavid Chang
commit cacd18a8476ce145ca5dcd46dc5b75585fd1289c upstream. Fix number_of_packets wrong endian conversion in function correct_endian_ret_submit() Signed-off-by: David Chang <dchang@novell.com> Acked-by: Arjan Mels <arjan.mels@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23Fix Ultrastor asm snippetSamuel Thibault
commit fad4dab5e44e10acf6b0235e469cb8e773b58e31 upstream. Commit 1292500b replaced "=m" (*field) : "1" (*field) with "=m" (*field) : with comment "The following patch fixes it by using the '+' operator on the (*field) operand, marking it as read-write to gcc." '+' was actually forgotten. This really puts it. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23bnx2i: Fixed packet error created when the sq_size is set to 16Eddie Wai
commit 7287c63e986fe1a51a89f4bb1327320274a7a741 upstream. The number of chip's internal command cell, which is use to generate SCSI cmd packets to the target, was not initialized correctly by the driver when the sq_size is changed from the default 128. This, in turn, will create a problem where the chip's transmit pipe will erroneously reuse an old command cell that is no longer valid. The fix is to correctly initialize the chip's command cell upon setup. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23mtd: mtdconcat: fix NAND OOB writeFelix Radensky
commit 431e1ecabddcd7cbba237182ddf431771f98bb4c upstream. Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23Fix memory leak in cpufreq_statsteven finney
commit 98586ed8b8878e10691203687e89a42fa3355300 upstream. When a CPU is taken offline in an SMP system, cpufreq_remove_dev() nulls out the per-cpu policy before cpufreq_stats_free_table() can make use of it. cpufreq_stats_free_table() then skips the call to sysfs_remove_group(), leaving about 100 bytes of sysfs-related memory unclaimed each time a CPU-removal occurs. Break up cpu_stats_free_table into sysfs and table portions, and call the sysfs portion early. Signed-off-by: Steven Finney <steven.finney@palm.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23CPU hotplug, re-create sysfs directory and symlinksJacob Shin
commit 27ecddc2a9f99ce4ac9a59a0acd77f7100b6d034 upstream. When we discover CPUs that are affected by each other's frequency/voltage transitions, the first CPU gets a sysfs directory created, and rest of the siblings get symlinks. Currently, when we hotplug off only the first CPU, all of the symlinks and the sysfs directory gets removed. Even though rest of the siblings are still online and functional, they are orphaned, and no longer governed by cpufreq. This patch, given the above scenario, creates a sysfs directory for the first sibling and symlinks for the rest of the siblings. Please note the recursive call, it was rather too ugly to roll it out. And the removal of redundant NULL setting (it is already taken care of near the top of the function). Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23vmxnet3: Fix inconsistent LRO state after initializationThomas Jarosch
commit ebde6f8acba92abfc203585198a54f47e83e2cd0 upstream. During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c9571aeba793cb5d3009094ee1d8fda35 "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23megaraid_sas: Sanity check user supplied length before passing it to ↵Bjørn Mork
dma_alloc_coherent() commit 98cb7e4413d189cd2b54daf993a4667d9788c0bb upstream. The ioc->sgl[i].iov_len value is supplied by the ioctl caller, and can be zero in some cases. Assume that's valid and continue without error. Fixes (multiple individual reports of the same problem for quite a while): http://marc.info/?l=linux-ide&m=128941801715301 http://bugs.debian.org/604627 http://www.mail-archive.com/linux-poweredge@dell.com/msg02575.html megasas: Failed to alloc kernel SGL buffer for IOCTL and [ 69.162538] ------------[ cut here ]------------ [ 69.162806] kernel BUG at /build/buildd/linux-2.6.32/lib/swiotlb.c:368! [ 69.163134] invalid opcode: 0000 [#1] SMP [ 69.163570] last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map [ 69.163975] CPU 0 [ 69.164227] Modules linked in: fbcon tileblit font bitblit softcursor vga16fb vgastate ioatdma radeon ttm drm_kms_helper shpchp drm i2c_algo_bit lp parport floppy pata_jmicron megaraid_sas igb dca [ 69.167419] Pid: 1206, comm: smartctl Tainted: G W 2.6.32-25-server #45-Ubuntu X8DTN [ 69.167843] RIP: 0010:[<ffffffff812c4dc5>] [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.168370] RSP: 0018:ffff88081c0ebc58 EFLAGS: 00010246 [ 69.168655] RAX: 000000000003bffc RBX: 00000000ffffffff RCX: 0000000000000002 [ 69.169000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88001dffe000 [ 69.169346] RBP: ffff88081c0ebcb8 R08: 0000000000000000 R09: ffff880000030840 [ 69.169691] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000000 [ 69.170036] R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000200000 [ 69.170382] FS: 00007fb8de189720(0000) GS:ffff88001de00000(0000) knlGS:0000000000000000 [ 69.170794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 69.171094] CR2: 00007fb8dd59237c CR3: 000000081a790000 CR4: 00000000000006f0 [ 69.171439] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 69.171784] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 69.172130] Process smartctl (pid: 1206, threadinfo ffff88081c0ea000, task ffff88081a760000) [ 69.194513] Stack: [ 69.205788] 0000000000000034 00000002817e3390 0000000000000000 ffff88081c0ebe00 [ 69.217739] <0> 0000000000000000 000000000003bffc 0000000000000000 0000000000000000 [ 69.241250] <0> 0000000000000000 00000000ffffffff ffff88081c5b4080 ffff88081c0ebe00 [ 69.277310] Call Trace: [ 69.289278] [<ffffffff812c52ac>] swiotlb_alloc_coherent+0xec/0x130 [ 69.301118] [<ffffffff81038b31>] x86_swiotlb_alloc_coherent+0x61/0x70 [ 69.313045] [<ffffffffa002d0ce>] megasas_mgmt_fw_ioctl+0x1ae/0x690 [megaraid_sas] [ 69.336399] [<ffffffffa002d748>] megasas_mgmt_ioctl_fw+0x198/0x240 [megaraid_sas] [ 69.359346] [<ffffffffa002f695>] megasas_mgmt_ioctl+0x35/0x50 [megaraid_sas] [ 69.370902] [<ffffffff81153b12>] vfs_ioctl+0x22/0xa0 [ 69.382322] [<ffffffff8115da2a>] ? alloc_fd+0x10a/0x150 [ 69.393622] [<ffffffff81153cb1>] do_vfs_ioctl+0x81/0x410 [ 69.404696] [<ffffffff8155cc13>] ? do_page_fault+0x153/0x3b0 [ 69.415761] [<ffffffff811540c1>] sys_ioctl+0x81/0xa0 [ 69.426640] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b [ 69.437491] Code: fe ff ff 48 8b 3d 74 38 76 00 41 bf 00 00 20 00 e8 51 f5 d7 ff 83 e0 ff 48 05 ff 07 00 00 48 c1 e8 0b 48 89 45 c8 e9 13 fe ff ff <0f> 0b eb fe 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 20 4c 89 [ 69.478216] RIP [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.489668] RSP <ffff88081c0ebc58> [ 69.500975] ---[ end trace 6a2181b634e2abc7 ]--- Reported-by: Bokhan Artem <aptem@ngs.ru> Reported by: Marc-Christian Petersen <m.c.p@gmx.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Michael Benz <Michael.Benz@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23zorro8390: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
commit cf7e032fc87d59c475df26c4d40bf45d401b2adb upstream. Changeset b6114794a1c394534659f4a17420e48cf23aa922 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by: Christian T. Steigies <cts@debian.org> Suggested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Christian T. Steigies <cts@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23libertas: fix cmdpendingq lockingPaul Fox
commit 2ae1b8b35faba31a59b153cbad07f9c15de99740 upstream. We occasionally see list corruption using libertas. While we haven't been able to diagnose this precisely, we have spotted a possible cause: cmdpendingq is generally modified with driver_lock held. However, there are a couple of points where this is not the case. Fix up those operations to execute under the lock, it seems like the correct thing to do and will hopefully improve the situation. Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23hydra: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
commit 0b25e0157dfa236a0629c16c8ad6f222f633f682 upstream. Changeset 5618f0d1193d6b051da9b59b0e32ad24397f06a4 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23ne-h8300: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
commit 2592a7354092afd304a8c067319b15ab1e441e35 upstream. Changeset dcd39c90290297f6e6ed8a04bb20da7ac2b043c5 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23NET: slip, fix ldisc->open retvalMatvejchikov Ilya
commit 057bef938896e6266ae24ec4266d24792d27c29a upstream. TTY layer expects 0 if the ldisc->open operation succeeded. Signed-off-by : Matvejchikov Ilya <matvejchikov@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23ehea: fix wrongly reported speed and portKleber Sacilotto de Souza
commit dcbe14b91a920657ff3a9ba0efb7c5b5562f956a upstream. Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and 10G and connected to FIBRE independent of the hardware configuration. However, when connected to FIBRE the only supported speed is 10G full-duplex, and the other speeds and modes are only supported when connected to twisted pair. Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-09fix oops in scsi_run_queue()James Bottomley
commit c055f5b2614b4f758ae6cc86733f31fa4c2c5844 upstream. The recent commit closing the race window in device teardown: commit 86cbfb5607d4b81b1a993ff689bbd2addd5d3a9b Author: James Bottomley <James.Bottomley@suse.de> Date: Fri Apr 22 10:39:59 2011 -0500 [SCSI] put stricter guards on queue dead checks is causing a potential NULL deref in scsi_run_queue() because the q->queuedata may already be NULL by the time this function is called. Since we shouldn't be running a queue that is being torn down, simply add a NULL check in scsi_run_queue() to forestall this. Tested-by: Jim Schutt <jaschut@sandia.gov> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>