summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Expand)Author
2018-12-24regulator: pfuze100: Apalis iMX6: Fix poweroff does not release POWER_ENABLE_...Sanchayan Maity
2018-12-24mxc_ipuv3_fb: Use the mode_string from command line as isBhuvanchandra DV
2018-12-24ov5640_mipi: Revert the hackBhuvanchandra DV
2018-12-24tty: serial: imx: Add support for enabling RS485 via device treeBhuvanchandra DV
2018-12-24net: can: flexcan: Fix wakeup on CAN from suspend issueSanchayan Maity
2018-12-24iio: adc: remove event advertismentStefan Agner
2018-12-24iio: adc: support IIO_CHAN_INFO_SCALEStefan Agner
2018-12-24apalis-imx6: use stopmode for poweroffMax Krummenacher
2018-12-24colibri-imx6: use stopmode for poweroffMax Krummenacher
2018-12-24iio: adc: fix removeStefan Agner
2018-12-24ARM: imx: clk: do not force clock frequency of M4Stefan Agner
2018-12-24mmc: sdhci-esdhc-imx: make sure runtime PM is suspended in system suspendStefan Agner
2018-12-24video: fbdev: mxsfb: make sure runtime PM is suspended in system suspendStefan Agner
2018-12-24net: fec: make sure runtime PM is suspended in system suspendStefan Agner
2018-12-24drivers: soc: Add new sysfs attribute to expose SoC unique IDBhuvanchandra DV
2018-12-24ARM: imx7d: clk: add root clock for keypad portStefan Agner
2018-12-24rpmsg: imx: do not push data when no reader is availableStefan Agner
2018-12-24ARM: imx: define buffer count per VirtIO queueStefan Agner
2018-12-24gpio: mxc: clear interrupt mask/status optionallyStefan Agner
2018-12-24video: mxc: ldb: Add support for LVDS configuration via kernel boot argumentsBhuvanchandra DV
2018-12-24media: Add support for ADV7280 decoder driverSanchayan Maity
2018-12-24mxc_v4l2_capture: Change error message to print on debugSanchayan Maity
2018-12-24mxc_v4l2_capture: Allow clock setting for de-interlaced video inputSanchayan Maity
2018-12-24tty: serial: imx: disable DCD and RI interruptsStefan Agner
2018-12-24PCI: Apalis GEN1 forcing quirkMarcel Ziswiler
2018-12-24mxc_v4l2_capture.c: make error messages uniqueMax Krummenacher
2018-12-24max9526.c: move pinctrl after i2c detectMax Krummenacher
2018-12-24adv7180.c: convert debug output to dev_dbgMax Krummenacher
2018-12-24mxc_v4l2_capture: match ipu/csi/mipi instead of only ipu/csiTroy Kisky
2018-12-24max9526: add initial MXC camera sensor codeMax Krummenacher
2018-12-24adv7180.c: initial working adv7180 settingsMax Krummenacher
2018-12-24mxc_v4l2_capture: let the camera driver set mipi/parallelMax Krummenacher
2018-12-24mxc_hdmi.c: fix boot hangMax Krummenacher
2018-12-24mxc_lcdif.c: fix commentMax Krummenacher
2018-12-24MXC_CSI_CAMERA: select VIDEOBUF2_DMA_CONTIGMax Krummenacher
2018-12-24clk-imx6q.c: set eth phy clock dependent on RMII/RGMIIMax Krummenacher
2018-12-24mxc_hdmi: fix detect disconnect caseMax Krummenacher
2018-12-24OmniVision ov5640 MIPI-CSI2 camera supportWojciech Bieganski
2018-12-24mxc_vdacif.c: add second parallel output used for VDACMax Krummenacher
2018-12-24mxc_lcdif.c: add additonal LCD timingsMax Krummenacher
2018-12-24mxc_lcdif.c: EDT-WVGA: fix pixelclk polarityMax Krummenacher
2018-12-24mxc_hdmi: skip unnecessary mxc_hdmi_setup callsDaniel Kochmanski
2018-12-24stmpe-adc: remove platform data supportStefan Agner
2018-12-24mfd: stmpe: move block variable to struct stmpeStefan Agner
2018-12-24iio:stmpe-adc.c: Switch to new event config interfaceMax Krummenacher
2018-12-24stmpe-adc: add temperature channelMax Krummenacher
2018-12-24stmpe-adc: add device tree bindingsMax Krummenacher
2018-12-24iio: adc: add STMPE ADC driver using IIO frameworkStefan Agner
2018-12-24mfd: stmpe: add ADC block resourcesStefan Agner
2018-12-24lcd: Add WVGA timings for the EDT 7.0" panelMax Krummenacher
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-06 14:50:14 +0000