summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-07-27ixgbe: potential null dereferenceDan Carpenter
The e_dev_err() macro dereferences "adapter" which is NULL here. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ks8842: Support DMA when accessed via timberdaleRichard Röjfors
This patch adds support for RX and TX DMA via the DMA API, this is only supported when the KS8842 is accessed via timberdale. There is no support for DMA on the generic bus interface it self, a state machine inside the FPGA is handling RX and TX transfers to/from buffers in the FPGA. The host CPU can do DMA to and from these buffers. The FPGA has to handle the RX interrupts, so these must be enabled in the ks8842 but not in the FPGA. The driver must not disable the RX interrupt that would mean that the data transfers into the FPGA buffers would stop. The host shall not enable TX interrupts since TX is handled by the FPGA, the host is notified by DMA callbacks when transfers are finished. Which DMA channels to use are added as parameters in the platform data struct. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27stmmac: fix automatic PAD/FCS strippingGiuseppe CAVALLARO
For Simple Ethernet frames (802.2 and 802.3) the GMAC Core never strips pad and fcs. This means the ACS has no effect on IPv4/6 frames. The FL bits, in the RDES0, include the FCS so the driver has to remove it in SW. For 802.3 frame format with LLC or LLC-SNAP, when set the ACS bit, the HW strips both PAD and FCS. The FL bits, in the RDES0, actually represents the frame length already stripped. This patch fixes this logic within the device driver that erroneously removed 4byte from 802.3 frames already stripped corrupting the payload. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27stmmac: fix timer setup when use dual mac KconfigGiuseppe CAVALLARO
The driver erroneously sets the tmrate to zero when the TMU initialisation fails. This actually generates problems while using the dual GMAC configuration. With this patch, enabling both the dual gmac and the timer optimisation, the first interface opened will use the tmu channel 2, the second one won't be able to use the timer but will continue to work without mitigating the interrupts by using the external timer (i.e. TMU channel 2). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: update driver version to 1.52.53-3Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Move statistics handling code to bnx2x_stats.*Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate file for ethtool routinesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create bnx2x_cmn.* filesDmitry Kravkov
Newly created files have no functionality changes, but includes some functionality from bnx2x_main.c which is common for PF and coming in the future VF driver. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: move global variable load_count to bnx2x.hDmitry Kravkov
This will allow access to this global variable (used in no-mcp mode) from different object files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: store module parameters in driver main structureDmitry Kravkov
Store module parameters during initialization of main driver structure. This will allow access to the parameters from different files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate folder for bnx2x driverDmitry Kravkov
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27igbvf, ixgbevf: use dev_hw_addr_randomStefan Assmann
Both igbvf and ixgbevf should set addr_assign_type to NET_ADDR_RANDOM so udev creates persistent net rules by matching the device path. Do this by using the dev_hw_addr_random helper function. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ixgbe: priority tagging FCoE frames without FCoE offloadJohn Fastabend
The DCB user priority for FCoE is available regardless of whether FCoE offload is enabled (IXGBE_FLAG_FCOE_ENABLED bit is set). This allows proper DCB user priority tagging for FCoE traffic on both 82598 and 82599 devices. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26e1000: use netif_<level> instead of netdev_<level>Emil Tantilov
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 675ad47375c76a7c3be4ace9554d92cd55518ced Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26usbnet: use jiffies in schedule_timeout(), not msecsKulikov Vasiliy
usbnet_terminate_urbs() uses schedule_timeout() with argument 3 msecs. schedule_timeout() uses jiffies as argument, so convert msecs to jiffies with msecs_to_jiffies(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ks8842: Support 100Mbps when accessed via timberdaleRichard Röjfors
This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26caif: handle snprintf() returnDan Carpenter
snprintf() returns the number of bytes that would have been written. It can be larger than the size of the buffer. The current code won't overflow, but people cut and paste this stuff so lets do it right and also make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ethoc: add devinit/devexit section initializersJonas Bonn
Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: restore EEPROM values of MDICNFG on reset with 82580Nick Nunley
On a reset the MDICNFG.Destination and MDICNFG.COM_MDIO register fields are not restored to the EEPROM default. This patch modifies the reset code to read the EEPROM and restore the default values. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: add support for SGMII-based MDIO PHYsNick Nunley
This patch adds support for external MDIO PHYs, in addition to the standard SFP support for SGMII PHYs over the I2C interface. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26e1000e: Drop a useless statementJean Delvare
err is set again a few lines below. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drivers/net/qla3xxx.c: Checkpatch cleanupsJoe Perches
Remove typedefs Indentation and spacing Use a temporary for a very long pointer variable More 80 column compatible Convert a switch to if/else if Compile tested only, depends on patch "Update logging message style" (old) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 209 errors, 82 warnings, 3995 lines checked (new) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 2 errors, 0 warnings, 3970 lines checked $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.old 49959 212 13728 63899 f99b drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drivers/net/qla3xxx.c: Update logging message styleJoe Perches
Use pr_<level> Use netdev_<level> Use netif_<level> Remove #define PFX Improve a couple of loops to avoid deep indentation. Compile tested only $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 51603 212 13864 65679 1008f drivers/net/qla3xxx.o.old 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25forcedeth: Fix different hardware statistics versions.Mike Ditto
The macros for the values of the bit field describing the four different versions of statistics supported by different hardware variants were being misused. Where the code was trying to test if the hardware implements V3, it was actually testing whether it implements any of V1, V2, or V3, causing the driver to report statistics that don't really exist in the hardware, with bogus values. Signed-off-by: Mike Ditto <mditto@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25net-next: Fix an overflow bug in vmxnet3 Tx descriptorBhavesh Davda
Fix an overflow bug in vmxnet3 Tx descriptor This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing into the 'gen' bit in the descriptor thereby corrupting the descriptor and stalling the transmit ring. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Matthew Delco <delcoM@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-253c59x: Add ethtool WOL supportAndrew O. Shadoura
This patch adds wrappers for ethtool to get or set wake-on-LAN setting without re-inserting the kernel module. Signed-off-by: Andrew O. Shadoura <andrew@beldisplaytech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix diag resource allocationSony Chacko
netif_device_attach missing from error path in qlcnic_diag_alloc_res Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix loopback testAmit Kumar Salecha
o Loopback not supported for virtual function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24ixgbe: fix ethtool statsEric Dumazet
In latest changes about 64bit stats on 32bit arches, [commit 28172739f0a276eb8 (net: fix 64 bit counters on 32 bit arches)], I missed ixgbe uses a bit of magic in its ixgbe_gstrings_stats definition. IXGBE_NETDEV_STAT() must now assume offsets relative to rtnl_link_stats64, not relative do dev->stats. As a bonus, we also get 64bit stats on ethtool -S Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24qlcnic: fix bandwidth checkRajesh Borundia
Fix maximum and minmum bandwith value. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-233c59x: Fix call to mdio_sync() with the wrong argumentBen Hutchings
commit a095cfc40ec7ebe63e9532383c5b5c2a27b14075 "3c59x: Specify window explicitly for access to windowed registers" changed the first parameter to mdio_sync(), from a pointer to the register mapping, to a pointer to the vortex_private structure, and changed all but one of the call sites. Fix that last one. Reported-by: Luca Falavigna <dktrkranz@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23net: s2io: fix buffer overflowKulikov Vasiliy
vpd_data[] is allocated as kmalloc(256, GFP_KERNEL), so if cnt = 255 then (cnt + 3) overflows 256. memset() is executed without checking. vpd_data[cnt+2] must be less than 256-cnt-2 as the latter is number of vpd_data[] elements to copy. Do not fill with zero the beginning of nic->serial_num as it will be filled with vpd_data[]. String in product_name[] should be terminated by '\0'. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23mv643xx_eth: potential null dereferenceDan Carpenter
We assume that "pd" can be null on the previous line, and throughout the function so we should check it here as well. This was introduced by 9b2c2ff7a1c0 "mv643xx_eth: use sw csum for big packets" Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23net: 3c59x: fix leak of iomapsKulikov Vasiliy
If vortex_probe1() fails we should unmap ioaddr mapped earlier. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23wireless: use newly introduced hex_to_bin()Andy Shevchenko
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Corey Thomas <coreythomas@charter.net> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23usb: usbnet: use newly introduced hex_to_bin()Andy Shevchenko
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23drivers: net: use newly introduced hex_to_bin()Andy Shevchenko
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23drivers: atm: don't use private copy of hex_to_bin()Andy Shevchenko
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: bump the driver version numberAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: variable name changesAjit Khaparde
This patch changes names of some variables. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: supress printing error when mac query fails for VFAjit Khaparde
When a virtual function driver in initialized, the network mac query command can fail. Skip display of error message in that case. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: code to support tx rate configuration on virtual functionsAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: add vlan support for sriov virtual functionsAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: add support to get vf configAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: change to call pmac_del only if necessaryAjit Khaparde
If a mac address has not been configured for a VF, there is no need to call be_cmd_pmac_del. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid useless removal of multicast addressesUrsula Braun
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Use memdup_user when user data is immediately copied into the ↵Julia Lawall
allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: return zero from reply callback functionsUrsula Braun
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-25 22:05:37 +0000