| Age | Commit message (Collapse) | Author |
|---|
|
The Chromebook Pixel uses an isl29023 ambient light sensor on the PANEL
GMBus.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
This will allow us to assign devices to buses by the type enum.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Instantiate the atmel mxt1664s touchscreen on this system.
The touchscreen may appear at two possible addresses:
0x4a in operational mode.
0x26 in bootloader mode.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
This will allow support for devices that may appear at more than
one i2c address at boot time. The specific example is the atmel_mxt touch
devices, which may appear at a different address if it comes up
in bootloader mode.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Instantiate the atmel mxt224s trackpad on this system.
The trackpad may appear at two possible addresses:
0x4b in operational mode.
0x25 in bootloader mode.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
The driver will not quite work if someone unbinds the platform device
from the platform driver via sysfs (moreover it will bomb is the driver
built into the kernel as hp_wmi_bios_remove is marked as __exit and will
not be present in the kernel).
To fix it let's use platform_driver_probe() instead of
platform_driver_register(), which disables binding/unbinding via sysfs.
This also allows us to mark hp_wmi_bios_setup as __init and discard it
once module is initialized.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
We need to decrement "i" first because the current "i" was not allocated
succesfully. Also we should go free the way down to zero to avoid a
leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Several models of HP laptops using the same DSDT have hotkey buttons
that do not work until the EC is configured to enable them.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Fix the following build warning
CC [M] drivers/platform/x86/asus-wmi.o
drivers/platform/x86/asus-wmi.c:1356:13: warning: ‘do_nothing’ defined but not used [-Wunused-function]
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Fengguang Wu run kernel build test to platform-drivers-x86/linux-next git tree
on x86_64 architecture and found a warning that was introduced by
727651bf738b6b917335025d09323d0962eda114 commit:
drivers/platform/x86/acer-wmi.c: In function âWMID_set_capabilitiesâ:
drivers/platform/x86/acer-wmi.c:1211: warning: âdevicesâ may be used
uninitialized in this function
This patch fixes the above warning message.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Handle HKEY event generated on AC power change. The current message
asks users to submit data related to this event which leads to
a lot of confusion and noise on the mailing list.
The following is a list affected models and 'Message-Id'
from ibm-acpi-devel@lists.sourceforge.net of people who saw this
event when either plugging or unplugging the AC adapter or
docking or undocking their laptop.
X120e - CAAAujb5v9dHdbdxDVvhNJoG4UrZC1TgKqeB_zGpAy7q8kZHMEQ@mail.gmail.com
X121e - 20120817143459.GB3462@x1.osrc.amd.com
X220 - Confirmed by Richard Hartmann
X220i - 4F406274.7070807@gmail.com
X220t - 4F489F5B.9040705@cs.tu-berlin.de
X230 - CAKx4u7kqvVH0-gstomsiVYdGC0i6=bGxzaQ8sq9gbg76TGme3w@mail.gmail.com
T420 - 9c848ee30b006737d0534d906bab0cf6@niklaas-baudet.net
T420s - 20120608080824.GS25324@hexapodia.org
W520 - 20121008181050.GF2549@ericlaptop.home.christensenplace.us
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Add support for the HP Pavilion 14 Chromebook's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
The Samsung Series 5 Chromebook is equipped with a Taos tsl2583
light sensor. Instatiate it here.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Two legacy Chromebooks, the Cr-48, and the Acer AC700,
are equipped with a Taos tsl2563 light sensor.
This will instantiate the sensor on those laptops.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Add support for the Acer C7's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
The Cypress trackpad on smbus is used on other systems
as well. Lets make the name more generic.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Z series and other recent models have 0x14? for lid and keyboard
backlight.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
The call to handlers 0x124 and 0x135 (rfkill control) seems to take a
bitmask to control various states of the device. For our rfkill we need
a fully on/off. SVZ1311Z9R/X's LTE modem needs more bits up.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47751
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Cc: stable@kernel.org
|
|
This adds the chromeos_laptop driver. It supports
the Cypress APA SMBUS touchpad as well as the isl29018 i2c ambient
light sensor on the Samsung Series 5 550 Chromebook.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
The new B series BIOS has version string 43CN46WW. The driver
requires that 2nd and 3rd characters be 'E' and 'T' respectively,
where as the newer BIOS has 'C' and 'N' respectively. Failing to
load the module causes some of the hotkeys to not work.
Before the patch
================
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.5.0-15-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device
After the patch
===============
[44937.265438] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[44937.265445] thinkpad_acpi: http://ibm-acpi.sf.net/
[44937.265449] thinkpad_acpi: ThinkPad BIOS 43CN46WW, EC unknown
[44937.265453] thinkpad_acpi: Lenovo Lenovo B470e, model HuronRiver Platform
[44937.266479] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[44937.266557] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[44937.267846] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[44937.268131] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: James Ferguson <james.ferguson@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Add rfkill support for the GPS radio found in HP laptops (HP Elitebook 2170p and the like)
using the Ericsson F5321/H5321 Mobile Broadband Module.
Signed-off-by: Viliam Trepák <trepo@netcomga.sk>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Found another Lenovo ideapad S205 the product name is 1038DPG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.
So, add this patch to support Lenovo ideapad S205-1038DPG wifi hardware
switch in acer-wmi driver.
Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.
Reference: bko#43007
https://bugzilla.kernel.org/show_bug.cgi?id=43007
Tested-by: Colin <colin.newell@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Found another Lenovo ideapad S205 the product name is 10382JG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.
So, add this patch to support Lenovo ideapad S205-10382JG wifi hardware
switch in acer-wmi driver.
Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.
Reference: bko#43007
https://bugzilla.kernel.org/show_bug.cgi?id=43007
Tested-by: Ivo Anjo <knuckles@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Fill up all the video switch keys in the map.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
For machines with AMD graphic chips, it will send out WMI event and ACPI
interrupt at the same time while hitting the hotkey. BIOS will notify the
system the next display output mode throught WMI event code, so that
windows' application can show an OSD to tell the user which mode will be
taken effect. User can hit the display toggle key many times within 2
seconds to choose the mode they want. After 2 seconds, WMI dirver should
send a WMIMethod(SDSP) command to tell the BIOS which mode the user chose.
And then BIOS will raise another ACPI interrupt to tell the system to
really switch the display mode.
In Linux desktop, we don't have this kind of OSD to let users to choose
the mode they want, so we don't need to call WMIMethod(SDSP) to have
another ACPI interrupt. To simplify the problem, we just have to ignore
the WMI event, and let the first ACPI interrupt to send out the key event.
For the need, here comes another quirk to add machines with this kind of
behavior. When the WMI driver receives the display toggle WMI event, and
found the machin is in the list, it will do nothing and let ACPI video
driver to report the key event.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Fill up all the video switch keys in the map.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Maybe this should be shared in another module...
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Add MSI Wind support to msi-wmi driver. MSI Wind has different GUID for
key events, different WMI key scan codes, it does not need filtering
consecutive identical events and it does not support backlight control
via MSIWMI_BIOS_GUID WMI. Tested on MSI Wind U100.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Introduced quirk_last_pressed variable that would indicate if
last_pressed is used or not. Also converted last_pressed to simple
variable in order to allow keymap to be non-contiguous.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Introduced function msi_wmi_backlight_setup() that initializes backlight
device. Made driver load and work if only one WMI (only for hotkeys or
only for backlight) is present.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Use enums for consecutive scancodes, rename key names from MSI_WMI_* to
MSI_KEY_* and use tabs for whitespace in msi_wmi_keymap.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Use UUID defines in MODULE_ALIAS strings to avoid repeating strings.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Fix memory leak - don't forget to kfree ACPI object when returning from
msi_wmi_notify() after suppressing key event.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
It seems that existing brightness control works only for old EC models.
On newer ones auto_brightness access always timeouts and lcd_level
always shows 0. So disable brightness control for new EC models. It
works fine with ACPI video driver anyway.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Add MSI Wind U90/U100 to DMI table and add some missing EC features
support such as basic fan control, turbo and ECO modes and touchpad
state. Tested on MSI Wind U100.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
This patch introduced a quirk_entry struct, then we merged all quirk
tables to msi_dmi_table. Then we can more easily to set different quirk
attributes for different machine.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Changed this patch so that it could be applied before MSI Wind U100
support patch. Changed rfkill logic for ec_read_only quirk support.
Removed delays if ec_delay = false.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Assign initial value to variable in order to prevent gcc warning about
uninitialized variable.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
Use proper function return codes instead of -1
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
|
|
For those machines with wapf=4, BIOS won't update the wireless LED,
since wapf=4 means user application will take in chage of the wifi and bt.
So, we have to update wlan LED status explicitly.
But I found there is another wireless LED bug in launchpad and which is
not in the wapf=4 quirk.
So, it might be better to set wireless LED status explicitly for all
machines.
BugLink: https://launchpad.net/bugs/901105
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Merge second patch-bomb from Andrew Morton:
- A little DM fix
- the MM queue
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (154 commits)
ksm: allocate roots when needed
mm: cleanup "swapcache" in do_swap_page
mm,ksm: swapoff might need to copy
mm,ksm: FOLL_MIGRATION do migration_entry_wait
ksm: shrink 32-bit rmap_item back to 32 bytes
ksm: treat unstable nid like in stable tree
ksm: add some comments
tmpfs: fix mempolicy object leaks
tmpfs: fix use-after-free of mempolicy object
mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages
mm: export mmu notifier invalidates
mm: accelerate mm_populate() treatment of THP pages
mm: use long type for page counts in mm_populate() and get_user_pages()
mm: accurately document nr_free_*_pages functions with code comments
HWPOISON: change order of error_states[]'s elements
HWPOISON: fix misjudgement of page_action() for errors on mlocked pages
memcg: stop warning on memcg_propagate_kmem
net: change type of virtio_chan->p9_max_pages
vmscan: change type of vm_total_pages to unsigned long
fs/nfsd: change type of max_delegations, nfsd_drc_max_mem and nfsd_drc_mem_used
...
|
|
The function names page_xchg_last_nid(), page_last_nid() and
reset_page_last_nid() were judged to be inconsistent so rename them to a
struct_field_op style pattern. As it looked jarring to have
reset_page_mapcount() and page_nid_reset_last() beside each other in
memmap_init_zone(), this patch also renames reset_page_mapcount() to
page_mapcount_reset(). There are others like init_page_count() but as
it is used throughout the arch code a rename would likely cause more
conflicts than it is worth.
[akpm@linux-foundation.org: fix zcache]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If one storage interface or usb network interface(iSCSI case) exists in
current configuration, memory allocation with GFP_KERNEL during
usb_device_reset() might trigger I/O transfer on the storage interface
itself and cause deadlock because the 'us->dev_mutex' is held in
.pre_reset() and the storage interface can't do I/O transfer when the
reset is triggered by other interface, or the error handling can't be
completed if the reset is triggered by the storage itself (error
handling path).
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Apply the introduced memalloc_noio_save() and memalloc_noio_restore() to
force memory allocation with no I/O during runtime_resume/runtime_suspend
callback on device with the flag of 'memalloc_noio' set.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Jiri Kosina <jiri.kosina@suse.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce the flag memalloc_noio in 'struct dev_pm_info' to help PM core
to teach mm not allocating memory with GFP_KERNEL flag for avoiding
probable deadlock.
As explained in the comment, any GFP_KERNEL allocation inside
runtime_resume() or runtime_suspend() on any one of device in the path
from one block or network device to the root device in the device tree
may cause deadlock, the introduced pm_runtime_set_memalloc_noio() sets
or clears the flag on device in the path recursively.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Jiri Kosina <jiri.kosina@suse.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
