summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a few fixups to various drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - fix touchpad initialization on Gigabyte U2442 Input: tca8418 - fix loading this driver as a module from a device tree Input: bma150 - extend chip detection for bma180 Input: atkbd - fix keyboard not working on some LG laptops Input: synaptics - add min/max quirk for ThinkPad Edge E431
2014-05-08Merge tag 'mfd-mmc-fixes-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mmc/rtsx revert from Lee Jones. * tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-07Merge tag 'for-linus-20140507' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fix from Brian Norris: "A single update for Keystone SoC's, whose NAND controller does not support subpage programming" * tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd: mtd: davinci-nand: disable subpage write for keystone-nand
2014-05-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix a small bug in computation of report size, which might cause some devices (Atmel touchpad found on the Samsung Ativ 9) to reject reports with otherwise valid contents - a few device-ID specific quirks/additions piggy-backing on top of it * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S HID: core: fix computation of the report size HID: multitouch: add support of EliteGroup 05D8 panels
2014-05-07Merge branch 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull radeon mullins support from Dave Airlie: "This is support for the new AMD mullins APU, it pretty much just adds support to the driver in the all the right places, and is pretty low risk wrt other GPUs" Oh well. I guess it ends up fitting under "support new hardware" for merging late. * 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
2014-05-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "radeon, i915 and nouveau fixes, all fixes for regressions or black screens, or possible oopses" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: lower the ref * post PLL maximum drm/radeon: check that we have a clock before PLL setup drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path drm/radeon: Fix num_banks calculation for SI agp: info leak in agpioc_info_wrap() drm/gm107/gr: bump attrib cb size quite a bit drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip drm/nouveau/bios: fix shadowing from PROM on big-endian systems drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi drm/radeon/dp: check for errors in dpcd reads drm/radeon: avoid high jitter with small frac divs drm/radeon: check buffer relocation offset drm/radeon: use pflip irq on R600+ v2 drm/radeon/uvd: use lower clocks on old UVD to boot v2 drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX drm/i915: Sanitize the enable_ppgtt module option once drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
2014-05-07Merge branch 'mullins' of git://people.freedesktop.org/~deathsimple/linux ↵Dave Airlie
into drm-fixes Add Mullins chips support. * 'mullins' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
2014-05-07Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes nouveau fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/gm107/gr: bump attrib cb size quite a bit drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip drm/nouveau/bios: fix shadowing from PROM on big-endian systems drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
2014-05-07Merge tag 'topc/core-stuff-2014-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Some more i915 fixes. There's still some DP issues we are looking into, but wanted to get these moving. * tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX drm/i915: Sanitize the enable_ppgtt module option once drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
2014-05-07Merge branch 'drm-fixes-3.15' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-fixes this is the next pull quested for stashed up radeon fixes for 3.15. As discussed support for Mullins was separated out and will get it's own pull request. Remaining highlights are: 1. Some more patches to better handle PLL limits. 2. Making use of the PFLIP additional to the VBLANK interrupt, otherwise we sometimes miss page flip events. 3. Fix for the UVD command stream parser. 4. Fix for bootup UVD clocks on RV7xx systems. 5. Adding missing error check on dpcd reads. 6. Fixes number of banks calculation on SI. * 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: lower the ref * post PLL maximum drm/radeon: check that we have a clock before PLL setup drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path drm/radeon: Fix num_banks calculation for SI drm/radeon/dp: check for errors in dpcd reads drm/radeon: avoid high jitter with small frac divs drm/radeon: check buffer relocation offset drm/radeon: use pflip irq on R600+ v2 drm/radeon/uvd: use lower clocks on old UVD to boot v2
2014-05-06agp: info leak in agpioc_info_wrap()Dan Carpenter
On 64 bit systems the agp_info struct has a 4 byte hole between ->agp_mode and ->aper_base. We need to clear it to avoid disclosing stack information to userspace. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06drivers/rtc/rtc-pcf8523.c: fix month definitionChris Cui
PCF8523 uses 1-12 to represent month according to datasheet. link: www.nxp.com/documents/data_sheet/PCF8523.pdf. Signed-off-by: Chris Cui <chris.wei.cui@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06drm/radeon: add Mullins VCE supportLeo Liu
VCE 2.0 just like the other CIK parts. Signed-off-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: modesetting updates for Mullins.Samuel Li
Uses the same code as Kabini. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: dpm updates for KV/KBAlex Deucher
- Use vddc/sclk dep table for voltage if available - Fix UVD DPM setup - Patch voltage tables properly for non-UVD blocks - Fix DPM + UVD/VCE on Mullins Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins dpm support.Samuel Li
Generic dpm support similar to Kabini. Mullins specific features will be worked on later. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins UVD support.Samuel Li
Has same version of UVD as other CIK parts. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: update cik init for Mullins.Samuel Li
Also add golden registers, update firmware loading functions. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins chip familySamuel Li
Mullins is a new CI-based APU. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: lower the ref * post PLL maximumChristian König
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75241 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: check that we have a clock before PLL setupChristian König
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75211 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: drm/radeon: add missing radeon_semaphore_free to error pathMaarten Lankhorst
It would appear this bug has been copy/pasted many times without being noticed. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-05-06drm/radeon: Fix num_banks calculation for SIMichel Dänzer
The way the tile mode array index was calculated only makes sense for the CIK specific macrotile mode array. For SI, we need to use one of the tile mode array indices reserved for displayable surfaces. This happened to result in correct display most if not all of the time because most of the SI tiling modes use the same number of banks. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad YogasPeter F. Patel-Schneider
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) e1000e computes header length incorrectly wrt vlans, fix from Vlad Yasevich. 2) ns_capable() check in sock_diag netlink code, from Andrew Lutomirski. 3) Fix invalid queue pairs handling in virtio_net, from Amos Kong. 4) Checksum offloading busted in sxgbe driver due to incorrect descriptor layout, fix from Byungho An. 5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen Lim. 6) Fix uninitialized A and X registers in BPF interpreter, from Alexei Starovoitov. 7) Fix arch dependencies of candence driver. 8) Fix netlink capabilities checking tree-wide, from Eric W Biederman. 9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in IFLA_EXT_MASK, from David Gibson. 10) IPV6 FIB dump restart doesn't handle table changes that happen meanwhile, causing the code to loop forever or emit dups, fix from Kumar Sandararajan. 11) Memory leak on VF removal in bnx2x, from Yuval Mintz. 12) Bug fixes for new Altera TSE driver from Vince Bridgers. 13) Fix route lookup key in SCTP, from Xugeng Zhang. 14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN driver. From Oliver Hartkopp. 15) TCP doesn't bump retransmit counters in some code paths, fix from Eric Dumazet. 16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by zero. Fix from Liu Yu. 17) Fix locking imbalance in error paths of HHF packet scheduler, from John Fastabend. 18) Properly reference the transport module when vsock_core_init() runs, from Andy King. 19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork. 20) IP_ECN_decapsulate() doesn't see a correct SKB network header in ip_tunnel_rcv(), fix from Ying Cai. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) net: macb: Fix race between HW and driver net: macb: Remove 'unlikely' optimization net: macb: Re-enable RX interrupt only when RX is done net: macb: Clear interrupt flags net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP ip_tunnel: Set network header properly for IP_ECN_decapsulate() e1000e: Restrict MDIO Slow Mode workaround to relevant parts e1000e: Fix issue with link flap on 82579 e1000e: Expand workaround for 10Mb HD throughput bug e1000e: Workaround for dropped packets in Gig/100 speeds on 82579 net/mlx4_core: Don't issue PCIe speed/width checks for VFs net/mlx4_core: Load the Eth driver first net/mlx4_core: Fix slave id computation for single port VF net/mlx4_core: Adjust port number in qp_attach wrapper when detaching net: cdc_ncm: fix buffer overflow Altera TSE: ALTERA_TSE should depend on HAS_DMA vsock: Make transport the proto owner net: sched: lock imbalance in hhf qdisc net: mvmdio: Check for a valid interrupt instead of an error net phy: Check for aneg completion before setting state to PHY_RUNNING ...
2014-05-05Merge tag 'usb-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small fixes and device ids for 3.15-rc4. All have been in linux-next just fine" * tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Nokia 5300 should be treated as unusual dev USB: Nokia 305 should be treated as unusual dev fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6 usb: storage: shuttle_usbat: fix discs being detected twice usb: qcserial: add a number of Dell devices USB: OHCI: fix problem with global suspend on ATI controllers usb: gadget: at91-udc: fix irq and iomem resource retrieval usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachine usb: phy: fsm: update OTG HNP state transition
2014-05-05Merge tag 'tty-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for things reported recently" * tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix lockless tty buffer race Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc" drivers/tty/hvc: don't free hvc_console_setup after init n_tty: Fix n_tty_write crash when echoing in raw mode tty: serial: 8250_core.c Bug fix for Exar chips.
2014-05-05Merge tag 'staging-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio fixes from Greg KH: "Here are some small IIO driver fixes for 3.15-rc4 that resolve some reported issues" * tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: Nothing in ADC should be a bool CONFIG iio: exynos_adc: use indio_dev->dev structure to handle child nodes iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference staging:iio:ad2s1200 fix missing parenthesis in a for statment.
2014-05-05net: macb: Fix race between HW and driverSoren Brinkmann
Under "heavy" RX load, the driver cannot handle the descriptors fast enough. In detail, when a descriptor is consumed, its used flag is cleared and once the RX budget is consumed all descriptors with a cleared used flag are prepared to receive more data. Under load though, the HW may constantly receive more data and use those descriptors with a cleared used flag before they are actually prepared for next usage. The head and tail pointers into the RX-ring should always be valid and we can omit clearing and checking of the used flag. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: macb: Remove 'unlikely' optimizationSoren Brinkmann
Coverage data suggests that the unlikely case of receiving data while the receive handler is running may not be that unlikely. Coverage data after running iperf for a while: 91320: 891: work_done = bp->macbgem_ops.mog_rx(bp, budget); 91320: 892: if (work_done < budget) { 2362: 893: napi_complete(napi); -: 894: -: 895: /* Packets received while interrupts were disabled */ 4724: 896: status = macb_readl(bp, RSR); 2362: 897: if (unlikely(status)) { 762: 898: if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) 762: 899: macb_writel(bp, ISR, MACB_BIT(RCOMP)); -: 900: napi_reschedule(napi); -: 901: } else { 1600: 902: macb_writel(bp, IER, MACB_RX_INT_FLAGS); -: 903: } -: 904: } Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: macb: Re-enable RX interrupt only when RX is doneSoren Brinkmann
When data is received during the driver processing received data the NAPI is re-scheduled. In that case the RX interrupt should not be re-enabled. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: macb: Clear interrupt flagsSoren Brinkmann
A few interrupt flags were not cleared in the ISR, resulting in a sytem trapped in the ISR in cases one of those interrupts occurred. Clear all flags to avoid such situations. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: macb: Pass same size to DMA_UNMAP as used for DMA_MAPSoren Brinkmann
Just as commit "net: macb: DMA-unmap full rx-buffer" (48330e08fa168395b9fd9f369f06cca1df204361), pass the size that was used for mapping the memory also to the unmap routine to avoid warnings from the DMA_API. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000e only. David provides four fixes for e1000e, first is a workaround for a hardware erratum on 82579 devices which experienced packet loss in gigabit and 100 speeds when interconnect between the PHY and MAC is exiting K1 power saving state. Second expands the scope of a workaround to include i217 and i218 parts as well to address over aggressive transmit behavior when connecting at 10Mbs half-duplex. Next is to resolve a reported link flap issue on 82579 parts which was root caused as an interoperability problem between 82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake mechanism. Lastly, restricts the workaround of putting the PHY into MDIO slow mode to access the PHY id to relevant parts since this issue has been fixed on the newer hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05e1000e: Restrict MDIO Slow Mode workaround to relevant partsDavid Ertman
It has been determined that the workaround of putting the PHY into MDIO slow mode to access the PHY id is not necessary with Lynx Point and newer parts. The issue that necessitated the workaround has been fixed on the newer hardware. We will maintains, as a last ditch attempt, the conversion to MDIO Slow Mode in the failure branch when attempting to access the PHY id so as to cover all contingencies. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Fix issue with link flap on 82579David Ertman
Several customers have reported a link flap issue on 82579. The symptoms are random and intermittent link losses when 82579 is connected to specific link partners. Issue has been root caused as interoperability problem between 82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake mechanism. To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M Low Power Idle. This solution will cause an increase of power in 100M EEE link. It will cost additional 28mW in this specific mode. Cc: Lukasz Adamczuk <lukasz.adamczuk@intel.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Expand workaround for 10Mb HD throughput bugDavid Ertman
In commit 772d05c51c4f4896c120ad418b1e91144a2ac813 "e1000e: slow performance between two 82579 connected via 10Mbit hub", a workaround was put into place to address the overaggressive transmit behavior of 82579 parts when connecting at 10Mbs half-duplex. This same behavior is seen on i217 and i218 parts as well. This patch expands the original workaround to encompass these parts. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Workaround for dropped packets in Gig/100 speeds on 82579David Ertman
This is a workaround for a HW erratum on 82579 devices. Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset specification Update June 2013. Problem: 82579 parts experience packet loss in Gig and 100 speeds when interconnect between PHY and MAC is exiting K1 power saving state. This was previously believed to only affect 1Gig speed, but has been observed at 100Mbs also. Workaround: Disable K1 for 82579 devices at Gig and 100 speeds. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05net/mlx4_core: Don't issue PCIe speed/width checks for VFsEyal Perry
Carrying out PCI speed/width checks through pcie_get_minimum_link() on VFs yield wrong results, so remove them. Fixes: b912b2f ('net/mlx4_core: Warn if device doesn't have enough PCI bandwidth') Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Load the Eth driver firstOr Gerlitz
When running in SRIOV mode, VM that is assigned with a non-provisioned Ethernet VFs get themselves a random mac when the Eth driver starts. In this case, if the IB driver startup code that deals with RoCE runs first, it will use a zero mac as the source mac for the Para-Virtual CM MADs which is buggy. To handle that, we change the order of loading. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Fix slave id computation for single port VFMatan Barak
The code that deals with computing the slave id based on a given GID gave wrong results when the number of single port VFs wasn't the same for port 1 vs. port 2 and the relevant VF is single ported on port 2. As a result, incoming CM MADs were dispatched to the wrong VF. Fixed that and added documentation to clarify the computation steps. Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Adjust port number in qp_attach wrapper when detachingJack Morgenstein
When using single ported VFs and the VF is using port 2, we need to adjust the port accordingly (change it from 1 to 2). Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Input: elantech - fix touchpad initialization on Gigabyte U2442Hans de Goede
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Cc: stable@vger.kernel.org Reported-by: Philipp Wolfer <ph.wolfer@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-05net: cdc_ncm: fix buffer overflowBjørn Mork
Commit 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") changed the padding logic for devices with the ZLP flag set. This meant that frames of any size will be sent without additional padding, except for the single byte added if the size is a multiple of the USB packet size. But if the unpadded size is identical to the maximum frame size, and the maximum size is a multiplum of the USB packet size, then this one-byte padding will overflow the buffer. Prevent padding if already at maximum frame size, letting usbnet transmit a ZLP instead in this case. Fixes: 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") Reported by: Yu-an Shih <yshih@nvidia.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Altera TSE: ALTERA_TSE should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `altera_tse_probe': altera_tse_main.c:(.text+0x25ec2e): undefined reference to `dma_set_mask' altera_tse_main.c:(.text+0x25ec78): undefined reference to `dma_supported' altera_tse_main.c:(.text+0x25ecb6): undefined reference to `dma_supported' drivers/built-in.o: In function `sgdma_async_read': altera_sgdma.c:(.text+0x25f620): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f678): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f696): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f6f0): undefined reference to `dma_map_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f702): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sgdma_tx_buffer': (.text+0x25f92a): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_rx_status': (.text+0x25fa24): undefined reference to `dma_sync_single_for_cpu' make[3]: *** [vmlinux] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-01 Please pull the following batch of fixes intended for the 3.15 stream! For the Bluetooth bits, Gustavo says: "Some fixes for 3.15. There is a revert for the intel driver, a new device id, and two important SSP fixes from Johan." On top of that... Ben Hutchings gives us a fix for an unbalanced irq enable in an rtl8192cu error path. Colin Ian King provides an rtlwifi fix for an uninitialized variable. Felix Fietkau brings a pair of ath9k fixes, one that corrects a hardware initialization value and another that removes an (unnecessary) flag that was being used in a way that led to a software tx queue hang in ath9k. Gertjan van Wingerde pushes a MAINTAINERS change to remove himself from the rt2x00 maintainer team. Hans de Goede fixes a brcmfmac firmware load hang. Larry Finger changes rtlwifi to use the correct queue for V0 traffic on rtl8192se. Rajkumar Manoharan corrects a race in ath9k driver initialization. Stanislaw Gruszka fixes an rt2x00 bug in which disabling beaconing once on USB devices led to permanently disabling beaconing for those devices. Tim Harvey provides fixes for a pair of ath9k issues that can lead to soft lockups in that driver. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge tag 'upstream-3.15-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs fixes from Artem Bityutskiy: "This includes the following fixes: - two real bug-fixes from Tanya for the still "experimental" UBI fastmap feature - a one-liner from Kees which hardens kernel security - a small error-path fix, where we forget to free various resources in case of failure - spotted by the 'smatch' tool" * tag 'upstream-3.15-rc5' of git://git.infradead.org/linux-ubifs: UBI: avoid workqueue format string leak UBI: fix ubi free PEBs count calculation UBI: fix error path in __wl_get_peb UBIFS: fix remount error path
2014-05-05floppy: don't write kernel-only members to FDRAWCMD ioctl outputMatthew Daley
Do not leak kernel-only floppy_raw_cmd structure members to userspace. This includes the linked-list pointer and the pointer to the allocated DMA space. Signed-off-by: Matthew Daley <mattd@bugfuzz.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-05floppy: ignore kernel-only members in FDRAWCMD ioctl inputMatthew Daley
Always clear out these floppy_raw_cmd struct members after copying the entire structure from userspace so that the in-kernel version is always valid and never left in an interdeterminate state. Signed-off-by: Matthew Daley <mattd@bugfuzz.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 23:13:10 +0000