summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-24lxfb: set the H- and V-SYNC polarity of the flatpanel outputMichael Grzeschik
Fixup for the flatpanel output. The geode_modedb attribute flags are used to set the SYNC polarity of the flatpanel. Without this patch our flatpanel registers stayed unconfigured, so we just saw garbage output. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24mmc: fix incorrect interpretation of card type bitsAdrian Hunter
In the extended CSD register the CARD_TYPE is an 8-bit value of which the upper 6 bits were reserved in JEDEC specifications prior to version 4.4. In version 4.4 two of the reserved bits were designated for identifying support for the newly added High-Speed Dual Data Rate. Unfortunately the mmc_read_ext_csd() function required that the reserved bits be zero instead of ignoring them as it should. This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are reserved or not yet supported. It also stops the function jumping to the end as though an error occurred, when it is only warns that the CARD_TYPE bits (that it does interpret) are invalid. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24c2port: fix device_create() return value checkJani Nikula
Use IS_ERR() instead of comparing to NULL. [akpm@linux-foundation.org: preserve the error code] Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24drivers/gpio/max730x.c: add license macroRichard Röjfors
According to the header in max730x it is licensed GPLv2. Add a MODULE_LICENSE to avoid getting the kernel tainted. [w.sang@pengutronix.de: add MODULE_AUTHOR and MODULE_DESCRIPTION also] Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24rtc/mc13783: fix use after free bugUwe Kleine-König
This was introduced by v2.6.34-rc1~38: 4c014e8 (rtc/mc13783: protect rtc {,un}registration by mc13783 lock) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: console: Check if port is valid in resize_console virtio: console: Generate a kobject CHANGE event on adding 'name' attribute
2010-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (38 commits) ip_gre: include route header_len in max_headroom calculation if_tunnel.h: add missing ams/byteorder.h include ipv4: Don't drop redirected route cache entry unless PTMU actually expired net: suppress lockdep-RCU false positive in FIB trie. Bluetooth: Fix kernel crash on L2CAP stress tests Bluetooth: Convert debug files to actually use debugfs instead of sysfs Bluetooth: Fix potential bad memory access with sysfs files netfilter: ctnetlink: fix reliable event delivery if message building fails netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err() NET_DMA: free skbs periodically netlink: fix unaligned access in nla_get_be64() tcp: Fix tcp_mark_head_lost() with packets == 0 net: ipmr/ip6mr: fix potential out-of-bounds vif_table access KS8695: update ksp->next_rx_desc_read at the end of rx loop igb: Add support for 82576 ET2 Quad Port Server Adapter ixgbevf: Message formatting cleanups ixgbevf: Shorten up delay timer for watchdog task ixgbevf: Fix VF Stats accounting after reset ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the address ixgbe: fix for real_num_tx_queues update issue ...
2010-03-22edac, mce: Filter out invalid valuesBorislav Petkov
Print the CPU associated with the error only when the field is valid. Cc: <stable@kernel.org> # .32.x .33.x Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-03-22virtio: console: Check if port is valid in resize_consoleAmit Shah
The console port could have been hot-unplugged. Check if it is valid before working on it. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-22virtio: console: Generate a kobject CHANGE event on adding 'name' attributeAmit Shah
When the host lets us know what 'name' a port is assigned, we create the sysfs 'name' attribute. Generate a 'change' event after this so that udev wakes up and acts on the rules for virtio-ports (currently there's only one rule that creates a symlink from the 'name' to the actual char device). Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-20Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller
2010-03-19KS8695: update ksp->next_rx_desc_read at the end of rx loopYegor Yefremov
There is no need to adjust the next rx descriptor after each packet, so do it only once at the end of the routine. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2010-03-19igb: Add support for 82576 ET2 Quad Port Server AdapterCarolyn Wyborny
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Message formatting cleanupsGreg Rose
Clean up some text output formatting. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Shorten up delay timer for watchdog taskGreg Rose
The recovery from PF reset works better when you shorten up the delay until the watchdog task executes. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Fix VF Stats accounting after resetGreg Rose
The counters in the 82599 Virtual Function are not clear on read. They accumulate to the maximum value and then roll over. They are also not cleared when the VF executes a soft reset, so it is possible they are non-zero when the driver loads and starts. This has all been accounted for in the code that keeps the stats up to date but there is one case that is not. When the PF driver is reset the counters in the VF are all reset to zero. This adds an additional accounting overhead into the VF driver when the PF is reset under its feet. This patch adds additional counters that are used by the VF driver to accumulate and save stats after a PF reset has been detected. Prior to this patch displaying the stats in the VF after the PF has reset would show bogus data. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the addressMallikarjuna R Chilakala
As per Simon Horman's feedback set IXGBE_RSC_CB(skb)->dma to zero after unmapping HWRSC DMA address to avoid double freeing. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: fix for real_num_tx_queues update issueVasu Dev
Currently netdev_features_change is called before fcoe tx queues setup is done, so this patch moves calling of netdev_features_change after tx queues setup is done in ixgbe_init_interrupt_scheme, so that real_num_tx_queues is updated correctly on each fcoe enable or disable. This allows additional fcoe queues updated correctly in vlan driver for their correct queue selection. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
2010-03-19Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
2010-03-19Merge branch 'zerolen' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
2010-03-19Delete zero-length file drivers/mtd/maps/omap_nor.cJeff Garzik
The content was deleted in cc87edb173effdf74e680ee6d622a935ff0c1d6f, but the file remained as a zero-length file. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-19USB: gadget/multi: cdc_do_config: remove redundant checkPeter Korsgaard
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: r8a66597-hcd: fix removed from an attached hubYoshihiro Shimoda
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: xhci: Make endpoint interval debugging clearer.Sarah Sharp
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Fix usb_fill_int_urb for SuperSpeed devicesMatthew Wilcox
USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: cp210x: Remove double usb_control_msg from cp210x_set_configMichael Brunner
This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: Michael Brunner <mibru@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Remove last bit of CONFIG_USB_BERRY_CHARGEChristoph Egger
One last bit was missed while removing the USB_BERRY_CHARGE config option in a8d4211f33a9573f7b1bdcfd9c9c48631d1515ee which gets dropped by this patch. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: gadget: add gadget controller number for s3c-hsotg driverMaurus Cuelenaere
This prevents some drivers from complaining that no bcdDevice id was set. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: ftdi_sio: Fix locking for change_speed() functionAlessio Igor Bogani
The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: g_mass_storage: fixed module name in KconfigMichal Nazarewicz
The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: gadget: f_mass_storage::fsg_bind(): fix error handlingPeter Korsgaard
Contrary to the comment in fsg_add, fsg_bind calls fsg_unbind on errors, which decreases refcount and frees the fsg_dev structure, causing trouble when fsg_add does the same. Fix it by simply leaving up cleanup to fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: g_mass_storage: fix section mismatch warningsMike Frysinger
The recent commit (0e530b45783f75) that moved usb_ep_autoconfig from the __devinit section to the __init section missed the mass storage device. Its fsg_bind() function uses the usb_ep_autoconfig() function from non __init context leading to: WARNING: drivers/usb/gadget/g_mass_storage.o(.text): Section mismatch in reference from the function _fsg_bind() to the function .init.text:_usb_ep_autoconfig() So move fsg_bind() into __init as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: gadget: fix Blackfin builds after gadget cleansingMike Frysinger
The recent change to clean out dead gadget drivers (90f7976880bbbf99) missed the call to gadget_is_musbhsfc() behind CONFIG_BLACKFIN. This causes Blackfin gadget builds to fail since the function no longer exists anywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: goku_udc: remove potential null dereferenceDan Carpenter
"dev" is always null here. In the end it's only used to get the pci_name() of "pdev" which is redundant information and so I removed it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is ↵spark
0xff Signed-off-by: spark <spark@bandrich.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: Fix module name typo for qcaux Kconfig entry.Stefan Schmidt
The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix deadlock between write and resumeOliver Neukum
The new runtime PM scheme allows resume() to have no locks. This fixes the deadlock. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix order in disconnect and fix lockingOliver Neukum
- as the callback can schedule work, URBs must be killed first - if the driver causes an autoresume, the caller must handle locking Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm:Fix loss of data due to autosuspendOliver Neukum
The guarding flag must be set and tested under spinlock and cleared before the URBs are resubmitted in resume. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix submission of URB after suspensionOliver Neukum
There's a window under which cdc-wdm may submit an URB to a device about to be suspended. This introduces a flag to prevent it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between disconnect and debug messagesOliver Neukum
dev_dbg() and dev_err() cannot be used to report failures that may have been caused by a device's removal Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between autosuspend and reading from the deviceOliver Neukum
While an available response is read the device must not be autosuspended. This requires a flag dedicated to that purpose. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: cdc-wdm: Fix race between write and disconnectOliver Neukum
Unify mutexes to fix a race between write and disconnect and shift the test for disconnection to always report it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: core: declare mbase only where it's usedFelipe Balbi
... and avoid a compilation if we disable host side of musb. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: musb: fix warnings in Blackfin regsMike Frysinger
The recent commit "usb: musb: Add context save and restore support" added some stubs for the Blackfin code so things would compile, but it also added a bunch of warnings due to missing return statements. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: abstract out ULPI_BUSCONTROL register reads/writesMike Frysinger
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. However, it has no ULPI support - so there are no registers at all. That means accesses to ULPI_BUSCONTROL have to be abstracted away like other MUSB registers. This fixes building for Blackfin parts again. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-25 11:21:15 +0000