summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-07-28Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDsRoger Quadros
Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - use Type-B Multi-Touch protocolRoger Quadros
Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add support for v7 devicesYunkang Tang
Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - cache firmware versionHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - change decode function prototype to return an intHans de Goede
So that decode functions can return a failure when appropriate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - report 2 touches when we've > 2 fingersHans de Goede
If we detect more then 2 fingers report 2 touches, rather then only reporting the upper left corner of the bounding box. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add an alps_report_semi_mt_data functionHans de Goede
Move all the semi-mt specific handling shared between the v3 and v4 handling code to a common helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use single touch data when v3 mt data contains only one fingerHans de Goede
For v3 protocol devices, use the more accurate single touch data when the mt data contains only one finger. Note the mt data reporting a finger count of 1 should never happen, but better safe then sorry. This brings the v3 bitmap handling in line with what the v4 code does, allowing to factor out the common bits into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use standard contact tracking instead of DIYHans de Goede
When there are 2 fingers on the pad we don't know which one is which, so use input_mt_assign_slots to make sure the right set of coordinates ends up in the right slot. Besides ensuring things end up in the right slot, this also results in a nice cleanup, since sync_frame also handles non mt position and btn_touch reporting. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use struct input_mt_pos to track coordinatesHans de Goede
This is a preparation patch for switching the DIY mt handling to using input_mt_assign_slots && input_mt_sync_frame. struct alps_fields is quite large, so while making changes to almost all uses of it lets put it in our priv data instead of on the stack. Having it in our priv data also allows using it directly for storing values which need to be cached, rather then having separate x, y, z, fingers, etc. copies in our priv data. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: round down when spreading adjescent fingers ↵Hans de Goede
over 2 points This fixes 2 fingers at the same height or width on the touchpad getting reported at different y / x coordinates. Note num_bits is always at least 1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: fix counting of high point bitsHans de Goede
alps_process_bitmap was resetting the point bit-count as soon as it saw 2 0 bits in a row. This means that unless the high point actually is at the end of the bitmap, it would always get its num_bits set to 0. Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers we only count the number of bits occupied by the highest finger. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: add alps_get_bitmap_points() helper functionHans de Goede
Factor out the identical code for getting the bitmap points for x and y into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: don't invert the Y-axis on RushmoreHans de Goede
Rushmore models don't have the Y-axis data in the bitmap inverted. Since we now have 2 different Y orientations, make the Y bitmap data processing use a forward loop like the X bitmap data processing, unifying the 2, and invert the data later, except on Rushmore. So far no-one has noticed this because the synaptics driver only uses the non mt coordinates (except on clickpads, and there are no alps clickpads using process_bitmap). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - improve 2-finger reporting on v3 modelsHans de Goede
V3 models only report mt bitmap data when there are 2 or more fingers on the touchpad. So always generate 2 positions in alps_process_bitmap, and for v3 models only fall back to st data when there was no mt data in a mt packet (which should never happen). This fixes 2 finger scrolling not working when using 2 fingers close to each other. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - fix rushmore packet decodingYunkang Tang
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: soc_button_array - add missing memory allocation checkPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom_serial4 - prepare for wacom USB moving to HIDDmitry Torokhov
wacom_wac.h will be moving to drivers/hid. Since we only need 3 definitions from it let's simply copy them over. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Input: ipaq-micro-ts - introduce open/closeDmitry Torokhov
Wire up open/close so we do not try to send events until someone uses them; this also allows us to remove micro_ts_remove() and rely fully on managed resources. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Input: driver for touchscreen on iPaq h3xxxDmitry Artamonow
This adds a driver for the touchscreen connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH, with the bulk of the code for the new input architecture rewritten by Dmitry Atamonow, and the final polish by Linus Walleij. Signed-off-by: Alessandro GARDICH <gremlin@gremlin.it> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Merge tag 'v3.16-rc6' into nextDmitry Torokhov
Merge with mainline to bring in changes to MFD to allow merging ipaq-micro-ts driver.
2014-07-23Input: atmel_mxt_ts - implement T44 message handlingNick Dyer
maXTouch chips allow the reading of multiple messages in a single I2C transaction, which reduces bus overhead and improves performance/latency. The number of messages available to be read is given by the value in the T44 object which is located directly before the T5 object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - split message handler into separate functionsNick Dyer
This is in preparation for support of the T44 message count object. Also, cache T5 address to avoid lookup on every interrupt cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - decode T6 status messagesNick Dyer
By storing the previous T6 status byte multiple debug output of the same status can be suppressed (for example CFGERR). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add support for dynamic message sizeNick Dyer
The T5 object may have various sizes depending on the objects used on the particular maXTouch chip and firmware version, therefore it can't be hardcoded in the driver. Allocate a buffer on probe instead. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - recover from bootloader on probeNick Dyer
The MXT device may be in bootloader mode on probe, due to: 1) APP CRC failure, either: a) flash corruption b) bad power or other intermittent problem while checking CRC 2) If the device has been reset 10 or more times without accessing comms 3) Warm probe, device was in bootloader mode already This code attempts to recover from 1(b) and 3. There is an additional complexity: we have to try two possible bootloader addresses because the mapping is not one-to-one and we don't know the exact model yet. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add bootloader addresses for new chipsNick Dyer
Later chips (for example mXT1664S) different mappings for bootloader addresses. This means that we must look at the family ID to determine which address to use. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - handle bootloader previously unlockedNick Dyer
On a warm probe, the device might be in a state where an flash operation was not completed. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - handle APP_CRC_FAIL on startupNick Dyer
If the bootloader on the touchscreen controller fails to initialise the firmware image, it stays in bootloader mode and reports a failure. It is possible to reflash a working firmware image from this state. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - calculate and check CRC in config fileNick Dyer
By validating the checksum, we can identify if the configuration is corrupt. In addition, this patch writes the configuration in a short series of block writes rather than as many individual values. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - download device config using firmware loaderNick Dyer
The existing implementation which encodes the configuration as a binary blob in platform data is unsatisfactory since it requires a kernel recompile for the configuration to be changed, and it doesn't deal well with firmware changes that move values around on the chip. Atmel define an ASCII format for the configuration which can be exported from their tools. This patch implements a parser for that format which loads the configuration via the firmware loader and sends it to the MXT chip. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - implement device tree supportStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - set pointer emulation on touchpadsBenson Leung
Touchpads are pointers, so make sure to pass the correct values to input_mt_report_pointer_emulation(). Without this, tap-to-click doesn't work. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - move input device init into separate functionNick Dyer
It is useful to initialise the input device later: - Screen parameters may not be not known yet, for instance if waiting for firmware loader to return. - Device may be in bootloader mode on probe (but could still be recovered by firmware download). In addition, later devices have a different touchscreen object (T100) which requires handling differently. This also reduces the complexity of the probe function. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - initialise IRQ before probingNick Dyer
The maXTouch chips use the CHG line to generate status events in bootloader mode, and during configuration download, before there is enough information to configure the input device. Therefore set up the interrupt handler earlier. However, this introduces states where parts of the interrupt processing must not run. Use data->object_table as a way to tell whether the chip information is valid, and data->input_dev as a way to tell whether it is valid to generate input report. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21Input: uinput - add UI_GET_VERSION ioctlDavid Herrmann
This ioctl is the counterpart to EVIOCGVERSION and returns the uinput-version the kernel was compiled with. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21Input: uinput - uinput_validate_absbits() cleanupDavid Herrmann
This moves basic checks and setup from uinput_setup_device() into uinput_validate_absbits() to make it easier to use. This way, we can call it from other places without copying the boilerplate code. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21Input: zforce - add regulator handlingHeiko Stuebner
It's possible that the controller has an individually switchable power supply. Therefore add support to control a supplying regulator. As this is not always the case, the regulator is requested as optional. Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20Merge tag 'staging-3.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull more IIO driver fixes from Greg KH: "Here are two IIO driver fixes for 3.16-rc6 that resolve some reported issues" * tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mma8452: Use correct acceleration units. iio:core: Handle error when mask type is not separate
2014-07-20Merge tag 'usb-3.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two USB patches that resolve some reported issues, one with an odd HUB, and one in the chipidea driver" * tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Check if port status is equal to RxDetect usb: chipidea: udc: Disable auto ZLP generation on ep0
2014-07-20Merge tag 'driver-core-3.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix that reverts an older patch that has been causing a number of reported problems with the platform devices. This revert has been in linux-next for a while with no reported issues" * tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: platform_get_irq: Revert to platform_get_resource if of_irq_get fails
2014-07-20Merge tag 'char-misc-3.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here's a single hyper-v driver fix for a reported issue" * tag 'char-misc-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: hv_fcopy: fix a race condition for SMP guest
2014-07-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull intel drm fixes from Dave Airlie: "Intel fixes came in late, but since I debugged one of them I'll send them on, Two reverts, a quirk and one warn regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
2014-07-20Input: s3c2410_ts - fix preparing/enabling clockVasily Khoruzhick
Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20Input: add support for Wacom protocol 4 serial tabletsHans de Goede
Recent version of xf86-input-wacom no longer support directly accessing serial tablets. Instead xf86-input-wacom now expects all wacom tablets to be driven by the kernel and to show up as evdev devices. This has caused old serial Wacom tablets to stop working for people who still have such tablets. Julian Squires has written a serio input driver to fix this: https://github.com/tokenrove/wacom-serial-iv This is a cleaned up version of this driver with improved Graphire support (I own an old Graphire myself). Signed-off-by: Julian Squires <julian@cipht.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20Input: max7359 - introduce the use of managed interfacesHimangi Saraogi
This patch introduces the use of managed interfaces like devm_kzalloc, devm_input_allocate_device, devm_request_threaded_irq etc. and does away with the calls to free the allocated memory. The remove function is no longer required and is completely done away with. Also, the labels in the probe function are removed. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three patches addressing shortcomings in the ARM gic interrupt chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: gic: Fix core ID calculation when topology is read from DT irqchip: gic: Add binding probe for ARM GIC400 irqchip: gic: Add support for cortex a7 compatible string
2014-07-19Merge tag 'drm-intel-fixes-2014-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel But in any case nothing really shocking in here, 2 reverts, 1 quirk and a regression fix a WARN. * tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
2014-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of key fixes and a few less critical ones. The main ones are: - add a .bss section to the PE/COFF headers when building with EFI stub - invoke the correct paravirt magic when building the espfix page tables Unfortunately both of these areas also have at least one additional fix each still in thie pipeline, but which are not yet ready to push" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused variable "polling" x86/espfix/xen: Fix allocation of pages for paravirt page tables x86/efi: Include a .bss section within the PE/COFF headers efi: fdt: Do not report an error during boot if UEFI is not available efi/arm64: efistub: remove local copy of linux_banner
2014-07-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - cxgb4 hardware driver regression fixes - mlx5 hardware driver regression fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx5: Enable "block multicast loopback" for kernel consumers RDMA/cxgb4: Call iwpm_init() only once mlx5_core: Fix possible race between mr tree insert/delete RDMA/cxgb4: Initialize the device status page RDMA/cxgb4: Clean up connection on ARP error RDMA/cxgb4: Fix skb_leak in reject_cr()
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-10 04:22:13 +0000