| Age | Commit message (Collapse) | Author |
|---|
|
commit 24a8d78a9affb63e5ced313ccde6888fe96edc6e upstream.
When naming the new devices, instead of using the ACPI ID in
the name as base, using the parent device's name. That makes
it possible to support multiple multi-instance i2c devices
of the same type in the same system.
This fixes an issue seen on some Intel Kaby Lake based
boards:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-INT3515-tps6598x.0'
Fixes: 2336dfadfb1e ("platform/x86: i2c-multi-instantiate: Allow to have same slaves")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 053a4ffe298836bb973d2cba59f82fff60c7db5b upstream.
The AUDIO PLL max support 650M, so the original clk settings violate
spec. This patch makes the output 786432000 -> 393216000,
and 722534400 -> 361267200 to aligned with NXP vendor kernel without any
impact on audio functionality and go within 650MHz PLL limit.
Cc: <stable@vger.kernel.org>
Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fc194ea6d34dfad9833d3043ce41d6c52aff39a upstream.
Add missing break statement in order to prevent the code from falling
through to case CRYPTO_ALG_TYPE_AHASH.
Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream.
As reported by the OpenWRT team, write requests sometimes fail on some
platforms.
Currently to check the state chip_ready() is used correctly as described by
the flash memory S29GL256P11TFI01 datasheet.
Also chip_good() is used to check if the write is succeeded and it was
implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error
checking").
But actually the write failure is caused on some platforms and also it can
be fixed by using chip_good() to check the state and retry instead.
Also it seems that it is caused after repeated about 1,000 times to retry
the write one word with the reset command.
By using chip_good() to check the state to be done it can be reduced the
retry with reset.
It is depended on the actual flash chip behavior so the root cause is
unknown.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Reported-by: Fabio Bettoni <fbettoni@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
[vigneshr@ti.com: Fix a checkpatch warning]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2acf40f0454d41b8d51c95d317283c20c931164d upstream.
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
Ville Viinikka (viinikv) reported and tested the quirk.
Link: https://github.com/sriemer/fix-linux-mouse issue 15
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org # v4.16+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 416dacb819f59180e4d86a5550052033ebb6d72c upstream.
The syzbot fuzzer has reported a pair of problems in the
hidraw_ioctl() function: slab-out-of-bounds read and use-after-free
read. An example of the first:
BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525
Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833
CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x6a/0x32c mm/kasan/report.c:351
__kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
kasan_report+0xe/0x12 mm/kasan/common.c:612
strlen+0x79/0x90 lib/string.c:525
strlen include/linux/string.h:281 [inline]
hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696
ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4
R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff
The two problems have the same cause: hidraw_ioctl() fails to test
whether the device has been removed. This patch adds the missing test.
Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ccff2843fb4e6d9d26e5ae9ffe9840b38b92638 upstream.
Before this commit dj_probe would exit with an error if the initial
logi_dj_recv_query_paired_devices fails. The initial call may fail
when the receiver is connected through a kvm and the focus is away.
When the call fails this causes 2 problems:
1) dj_probe calls logi_dj_recv_query_paired_devices after calling
hid_device_io_start() so a HID report may have been received in between
and our delayedwork_callback may be running. It seems that the initial
logi_dj_recv_query_paired_devices failure happening with some KVMs triggers
this exact scenario, causing the work-queue to run on free-ed memory,
leading to:
BUG: unable to handle page fault for address: 0000000000001e88
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 257 Comm: kworker/3:3 Tainted: G OE 5.3.0-rc5+ #100
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M Pro4S/D3, BIOS P7.10 12/06/2016
Workqueue: events 0xffffffffc02ba200
RIP: 0010:0xffffffffc02ba1bd
Code: e8 e8 13 00 d8 48 89 c5 48 85 c0 74 4c 48 8b 7b 10 48 89 ea b9 07 00 00 00 41 b9 09 00 00 00 41 b8 01 00 00 00 be 10 00 00 00 <48> 8b 87 88 1e 00 00 48 8b 40 40 e8 b3 6b b4 d8 48 89 ef 41 89 c4
RSP: 0018:ffffb760c046bdb8 EFLAGS: 00010286
RAX: ffff935038ea4550 RBX: ffff935046778000 RCX: 0000000000000007
RDX: ffff935038ea4550 RSI: 0000000000000010 RDI: 0000000000000000
RBP: ffff935038ea4550 R08: 0000000000000001 R09: 0000000000000009
R10: 000000000000e011 R11: 0000000000000001 R12: ffff9350467780e8
R13: ffff935046778000 R14: 0000000000000000 R15: ffff935046778070
FS: 0000000000000000(0000) GS:ffff935054e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001e88 CR3: 000000075a612002 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
0xffffffffc02ba2f7
? process_one_work+0x1b1/0x560
process_one_work+0x234/0x560
worker_thread+0x50/0x3b0
kthread+0x10a/0x140
? process_one_work+0x560/0x560
? kthread_park+0x80/0x80
ret_from_fork+0x3a/0x50
Modules linked in: vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep vfat fat btusb btrtl btbcm btintel bluetooth intel_rapl_msr ecdh_generic rfkill ecc snd_usb_audio snd_usbmidi_lib intel_rapl_common snd_rawmidi mc x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt iTCO_vendor_support mei_wdt mei_hdcp ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_generic crc32_pclmul snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio ghash_clmulni_intel intel_cstate snd_hda_intel snd_hda_codec intel_uncore snd_hda_core snd_hwdep intel_rapl_perf snd_seq snd_seq_device snd_pcm snd_timer intel_wmi_thunderbolt snd e1000e soundcore mxm_wmi i2c_i801 bfq mei_me mei intel_pch_thermal parport_pc parport acpi_pad binfmt_misc hid_lg_g15(E) hid_logitech_dj(E) i915 crc32c_intel i2c_algo_bit drm_kms_helper nvme nvme_core drm wmi video uas usb_storage i2c_dev
CR2: 0000000000001e88
---[ end trace 1d3f8afdcfcbd842 ]---
2) Even if we were to fix 1. by making sure the work is stopped before
failing probe, failing probe is the wrong thing to do, we have
logi_dj_recv_queue_unknown_work to deal with the initial
logi_dj_recv_query_paired_devices failure.
Rather then error-ing out of the probe, causing the receiver to not work at
all we should rely on this, so that the attached devices will get properly
enumerated once the KVM focus is switched back.
Cc: stable@vger.kernel.org
Fixes: 74808f9115ce ("HID: logitech-dj: add support for non unifying receivers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f9242775bb61f390f0885f23fc16397262c7538 upstream.
The syzbot fuzzer found a general protection fault in the HID subsystem:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069
Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02
00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48
89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00
RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000
RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a
RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25
R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004
R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048
FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline]
usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707
usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234
hid_hw_power include/linux/hid.h:1038 [inline]
hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282
chrdev_open+0x219/0x5c0 fs/char_dev.c:413
do_dentry_open+0x497/0x1040 fs/open.c:778
do_last fs/namei.c:3416 [inline]
path_openat+0x1430/0x3ff0 fs/namei.c:3533
do_filp_open+0x1a1/0x280 fs/namei.c:3563
do_sys_open+0x3c0/0x580 fs/open.c:1070
do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
It turns out the fault was caused by a bug in the HID Logitech driver,
which violates the requirement that every pathway calling
hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug
by making sure the requirement is met.
Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bcdacb70327013ca2066bfcf2af1009eff01f1d upstream.
The sony driver is not properly cleaning up from potential failures in
sony_input_configured. Currently it calls hid_hw_stop, while hid_connect
is still running. This is not a good idea, instead hid_hw_stop should
be moved to sony_probe. Similar changes were recently made to Logitech
drivers, which were also doing improper cleanup.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98375b86c79137416e9fd354177b85e768c16e56 upstream.
The syzbot fuzzer provoked a general protection fault in the
hid-prodikeys driver:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline]
RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline]
RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline]
RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836
Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc
48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f
85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b
The problem is caused by the fact that pcmidi_get_output_report() will
return an error if the HID device doesn't provide the right sort of
output report, but pcmidi_set_operational() doesn't bother to check
the return code and assumes the function call always succeeds.
This patch adds the missing check and aborts the probe operation if
necessary.
Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
undefined SW FP routines
commit 0f0727d971f6fdf8f1077180d495ddb9928f0c8b upstream.
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines for Clang.
This was originally landed in:
commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
but reverted in:
commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
due to bugreports from GCC builds. Add guards to only do so for Clang.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd200d190f45b62c006d1ad0a63eeffd87db7a47 upstream.
[Why]
DRM private objects have no hw_done/flip_done fencing mechanism on their
own and cannot be used to sequence commits accordingly.
When issuing commits that don't touch the same set of hardware resources
like page-flips on different CRTCs we can run into the issue below
because of this:
1. Client requests non-blocking Commit #1, has a new dc_state #1,
state is swapped, commit tail is deferred to work queue
2. Client requests non-blocking Commit #2, has a new dc_state #2,
state is swapped, commit tail is deferred to work queue
3. Commit #2 work starts, commit tail finishes,
atomic state is cleared, dc_state #1 is freed
4. Commit #1 work starts,
commit tail encounters null pointer deref on dc_state #1
In order to change the DC state as in the private object we need to
ensure that we wait for all outstanding commits to finish and that
any other pending commits must wait for the current one to finish as
well.
We do this for MEDIUM and FULL updates. But not for FAST updates, nor
would we want to since it would cause stuttering from the delays.
FAST updates that go through dm_determine_update_type_for_commit always
create a new dc_state and lock the DRM private object if there are
any changed planes.
We need the old state to validate, but we don't actually need the new
state here.
[How]
If the commit isn't a full update then the use after free can be
resolved by simply discarding the new state entirely and retaining
the existing one instead.
With this change the sequence above can be reexamined. Commit #2 will
still free Commit #1's reference, but before this happens we actually
added an additional reference as part of Commit #2.
If an update comes in during this that needs to change the dc_state
it will need to wait on Commit #1 and Commit #2 to finish. Then it'll
swap the state, finish the work in commit tail and drop the last
reference on Commit #2's dc_state.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204181
Fixes: 004b3938e637 ("drm/amd/display: Check scaling info when determing update type")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43d10d30df156f7834fa91aecb69614fefc8bb0a upstream.
[Why]
By passing through the dm_determine_update_type_for_commit for atomic
commits that can be done asynchronously we are incurring a
performance penalty by locking access to the global private object
and holding that access until the end of the programming sequence.
This is also allocating a new large dc_state on every access in addition
to retaining all the references on each stream and plane until the end
of the programming sequence.
[How]
Shift the determination for async update before validation. Return early
if it's going to be an async update.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e16e37efb4c9eb7bcb9dab756c975040c5257e98 upstream.
[Why]
We previously allowed framebuffer swaps as async updates for cursor
planes but had to disable them due to a bug in DRM with async update
handling and incorrect ref counting. The check to block framebuffer
swaps has been added to DRM for a while now, so this check is redundant.
The real fix that allows this to properly in DRM has also finally been
merged and is getting backported into stable branches, so dropping
this now seems to be the right time to do so.
[How]
Drop the redundant check for old_fb != new_fb.
With the proper fix in DRM, this should also fix some cursor stuttering
issues with xf86-video-amdgpu since it double buffers the cursor.
IGT tests that swap framebuffers (-varying-size for example) should
also pass again.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14e019df1e64c8b19ce8e0b3da25b6f40c8716be upstream.
Deferred probe is an expected return value on many platforms and so
there's no need to output a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 763719771e84b8c8c2f53af668cdc905faa608de upstream.
Deferred probe is an expected return value for clk_get() on many
platforms. The driver deals with it properly, so there's no need
to output a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream.
Ensure we do not access the buffer beyond the end if no 0xff byte
is encountered.
Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 52f6f9d74f31078964ca1574f7bb612da7877ac8 upstream.
As sparse points out, these two copy_from_user() should actually be
copy_to_user().
Fixes: 229b53c9bf4e ("take floppy compat ioctls to sodding floppy.c")
Cc: stable@vger.kernel.org
Acked-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c upstream.
Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct
READY_STATUS poll break condition") I failed to conclude that the
PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
the PHY gets ready. Similar to the prior bug with UFS the code will
generally get past the check before the transition and thereby
"succeed".
Correct the name of the register used PCIe and USB3 PHYs, replace
mask_pcs_ready with a constant expression depending on the type of the
PHY and check for the appropriate ready state.
Cc: stable@vger.kernel.org
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream.
When half-duplex RS485 communication is used, after RX is started, TX
tasklet still needs to be scheduled tasklet. This avoids console freezing
when more data is to be transmitted, if the serial communication is not
closed.
Fixes: 69646d7a3689 ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c801e313195addaf11c16e155f50789d6ebfd19 upstream.
The sequence of arguments which was passed to handle_lsr_errors() didn't
match the parameters defined in that function, &lsr was passed to flag
and &flag was passed to lsr, this patch fixed that.
Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream.
The VPD implementation from Chromium Vital Product Data project used to
parse data from untrusted input without checking if the meta data is
invalid or corrupted. For example, the size from decoded content may
be negative value, or larger than whole input buffer. Such invalid data
may cause buffer overflow.
To fix that, the size parameters passed to vpd_decode functions should
be changed to unsigned integer (u32) type, and the parsing of entry
header should be refactored so every size field is correctly verified
before starting to decode.
Fixes: ad2ac9d5c5e0 ("firmware: Google VPD: import lib_vpd source files")
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 19e13cb27b998ff49f07e399b5871bfe5ba7e3f0 ]
We need to hold rnl lock in suspend and resume callbacks because phylink
requires it. Otherwise we will get a WARN() in suspend and resume.
Also, move phylink start and stop callbacks to inside device's internal
lock so that we prevent concurrent HW accesses.
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
Reported-by: Christophe ROULLIER <christophe.roullier@st.com>
Tested-by: Christophe ROULLIER <christophe.roullier@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 00b368502d18f790ab715e055869fd4bb7484a9b ]
When skb_shinfo(skb) is not able to cache extra fragment (that is,
skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes
the sk_buff_head list is already empty. As a result, cons is increased only
by 1 and returns to error handling path in xennet_poll().
However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be
set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring
buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are
already cleared to NULL. This leads to NULL pointer access in the next
iteration to process rx ring buffer entries.
Below is how xennet_poll() does error handling. All remaining entries in
tmpq are accounted to queue->rx.rsp_cons without assuming how many
outstanding skbs are remained in the list.
985 static int xennet_poll(struct napi_struct *napi, int budget)
... ...
1032 if (unlikely(xennet_set_skb_gso(skb, gso))) {
1033 __skb_queue_head(&tmpq, skb);
1034 queue->rx.rsp_cons += skb_queue_len(&tmpq);
1035 goto err;
1036 }
It is better to always have the error handling in the same way.
Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream.
The hardware manual should be revised, but the initial value of
VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware
clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically
when the hardware detects over-current signal from a USB power switch.
However, since the hardware doesn't have any registers which
indicates over-current, the driver cannot handle it at all. So, if
"is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS
register is cleared automatically, the channel cannot be used after
that.
To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0
to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware
detects over-current. (We assume a USB power switch itself protects
over-current and turns the VBUS off.)
This patch is inspired by a BSP patch from Kazuya Mizuguchi.
Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 699bf94114151aae4dceb2d9dbf1a6312839dcae upstream.
The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set
to NULL after each free.
stop stream
urb killing
urb buffer free
tm6000: got start feed request tm6000_start_feed
tm6000: got start stream request tm6000_start_stream
tm6000: pipe reset
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: IR URB failure: status: -71, length 0
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
tm6000: error tm6000_urb_received
usb 1-2: USB disconnect, device number 5
tm6000: disconnecting tm6000 #0
==================================================================
BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb]
Read of size 8 at addr ffff888241044060 by task kworker/2:0/22
CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G W 5.3.0-rc4+ #1
Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack+0x9a/0xf0
print_address_description.cold+0xae/0x34f
__kasan_report.cold+0x75/0x93
? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa]
? dvb_fini+0x75/0x140 [tm6000_dvb]
kasan_report+0xe/0x12
dvb_fini+0x75/0x140 [tm6000_dvb]
tm6000_close_extension+0x51/0x80 [tm6000]
tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000]
usb_unbind_interface+0xe4/0x390
device_release_driver_internal+0x121/0x250
bus_remove_device+0x197/0x260
device_del+0x268/0x550
? __device_links_no_driver+0xd0/0xd0
? usb_remove_ep_devs+0x30/0x3b
usb_disable_device+0x122/0x400
usb_disconnect+0x153/0x430
hub_event+0x800/0x1e40
? trace_hardirqs_on_thunk+0x1a/0x20
? hub_port_debounce+0x1f0/0x1f0
? retint_kernel+0x10/0x10
? lock_is_held_type+0xf1/0x130
? hub_port_debounce+0x1f0/0x1f0
? process_one_work+0x4ae/0xa00
process_one_work+0x4ba/0xa00
? pwq_dec_nr_in_flight+0x160/0x160
? do_raw_spin_lock+0x10a/0x1d0
worker_thread+0x7a/0x5c0
? process_one_work+0xa00/0xa00
kthread+0x1d5/0x200
? kthread_create_worker_on_cpu+0xd0/0xd0
ret_from_fork+0x3a/0x50
Allocated by task 2682:
save_stack+0x1b/0x80
__kasan_kmalloc.constprop.0+0xc2/0xd0
usb_alloc_urb+0x28/0x60
tm6000_start_feed+0x10a/0x300 [tm6000_dvb]
dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core]
dvb_dmxdev_start_feed+0x121/0x180 [dvb_core]
dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core]
dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core]
dvb_usercopy+0x97/0x1f0 [dvb_core]
dvb_demux_ioctl+0x11/0x20 [dvb_core]
do_vfs_ioctl+0x5d8/0x9d0
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x3d/0x50
do_syscall_64+0x74/0xe0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 22:
save_stack+0x1b/0x80
__kasan_slab_free+0x12c/0x170
kfree+0xfd/0x3a0
xhci_giveback_urb_in_irq+0xfe/0x230
xhci_td_cleanup+0x276/0x340
xhci_irq+0x1129/0x3720
__handle_irq_event_percpu+0x6e/0x420
handle_irq_event_percpu+0x6f/0x100
handle_irq_event+0x55/0x84
handle_edge_irq+0x108/0x3b0
handle_irq+0x2e/0x40
do_IRQ+0x83/0x1a0
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3dd550a2d36596a1b0ee7955da3b611c031d3873 upstream.
The syzbot fuzzer provoked a slab-out-of-bounds error in the USB core:
BUG: KASAN: slab-out-of-bounds in memcmp+0xa6/0xb0 lib/string.c:904
Read of size 1 at addr ffff8881d175bed6 by task kworker/0:3/2746
CPU: 0 PID: 2746 Comm: kworker/0:3 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x6a/0x32c mm/kasan/report.c:351
__kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
kasan_report+0xe/0x12 mm/kasan/common.c:612
memcmp+0xa6/0xb0 lib/string.c:904
memcmp include/linux/string.h:400 [inline]
descriptors_changed drivers/usb/core/hub.c:5579 [inline]
usb_reset_and_verify_device+0x564/0x1300 drivers/usb/core/hub.c:5729
usb_reset_device+0x4c1/0x920 drivers/usb/core/hub.c:5898
rt2x00usb_probe+0x53/0x7af
drivers/net/wireless/ralink/rt2x00/rt2x00usb.c:806
The error occurs when the descriptors_changed() routine (called during
a device reset) attempts to compare the old and new BOS and capability
descriptors. The length it uses for the comparison is the
wTotalLength value stored in BOS descriptor, but this value is not
necessarily the same as the length actually allocated for the
descriptors. If it is larger the routine will call memcmp() with a
length that is too big, thus reading beyond the end of the allocated
region and leading to this fault.
The kernel reads the BOS descriptor twice: first to get the total
length of all the capability descriptors, and second to read it along
with all those other descriptors. A malicious (or very faulty) device
may send different values for the BOS descriptor fields each time.
The memory area will be allocated using the wTotalLength value read
the first time, but stored within it will be the value read the second
time.
To prevent this possibility from causing any errors, this patch
modifies the BOS descriptor after it has been read the second time:
It sets the wTotalLength field to the actual length of the descriptors
that were read in and validated. Then the memcpy() call, or any other
code using these descriptors, will be able to rely on wTotalLength
being valid.
Reported-and-tested-by: syzbot+35f4d916c623118d576e@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909041154260.1722-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull virtio fix from Michael Tsirkin:
"A last minute revert
The 32-bit build got broken by the latest defence in depth patch.
Revert and we'll try again in the next cycle"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "vhost: block speculation of translated descriptors"
|
|
This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b.
I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Don't corrupt xfrm_interface parms before validation, from Nicolas
Dichtel.
2) Revert use of usb-wakeup in btusb, from Mario Limonciello.
3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
Leonardo Bras.
4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.
5) Missing ULP check in sock_map, from John Fastabend.
6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.
7) Fix length of SKB allocated in 6pack driver, from Christophe
JAILLET.
8) ip6_route_info_create() returns an error pointer, not NULL. From
Maciej Żenczykowski.
9) Only add RDS sock to the hashes after rs_transport is set, from
Ka-Cheong Poon.
10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.
11) Presence of transmit IPSEC offload in an SKB is not tested for
correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
Kirsher.
12) Need rcu_barrier() when register_netdevice() takes one of the
notifier based failure paths, from Subash Abhinov Kasiviswanathan.
13) Fix leak in sctp_do_bind(), from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
cdc_ether: fix rndis support for Mediatek based smartphones
sctp: destroy bucket if failed to bind addr
sctp: remove redundant assignment when call sctp_get_port_local
sctp: change return type of sctp_get_port_local
ixgbevf: Fix secpath usage for IPsec Tx offload
sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
ixgbe: Fix secpath usage for IPsec TX offload.
net: qrtr: fix memort leak in qrtr_tun_write_iter
net: Fix null de-reference of device refcount
ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
tun: fix use-after-free when register netdev failed
tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
ixgbe: fix double clean of Tx descriptors with xdp
ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
mlx4: fix spelling mistake "veify" -> "verify"
net: hns3: fix spelling mistake "undeflow" -> "underflow"
net: lmc: fix spelling mistake "runnin" -> "running"
NFC: st95hf: fix spelling mistake "receieve" -> "receive"
net/rds: An rds_sock is added too early to the hash table
mac80211: Do not send Layer 2 Update frame before authorization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Fixup runtime PM management during probe and remove
- sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC
- bcm2835: Prevent lockups when terminating work
* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fixup runtime PM management during remove
mmc: tmio: Fixup runtime PM management during probe
Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
Revert "mmc: bcm2835: Terminate timeout work synchronously"
|
|
Pull drm fixes from Dave Airlie:
"From the maintainer summit, just some last minute fixes for final:
lima:
- fix gem_wait ioctl
core:
- constify modes list
i915:
- DP MST high color depth regression
- GPU hangs on vulkan compute workloads"
* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
drm/lima: fix lima_gem_wait() return value
drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
drm/i915: Limit MST to <= 8bpc once again
drm/modes: Make the whitelist more const
|
|
A Mediatek based smartphone owner reports problems with USB
tethering in Linux. The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with
[ 355.960428] usb 1-4: bad CDC descriptors
The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.
No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled. The same applies to the two
types of Misc class RNDIS functions.
Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.
Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:
0e8d:000a Mediatek Crosscall Spider X5 3G Phone
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x0f
connection notifications
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
and
19d2:1023 ZTE K4201-z
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
The Mediatek example is believed to apply to most smartphones with
Mediatek firmware. The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port the same fix for ixgbe to ixgbevf.
The ixgbevf driver currently does IPsec Tx offloading
based on an existing secpath. However, the secpath
can also come from the Rx side, in this case it is
misinterpreted for Tx offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for Tx offload.
CC: Shannon Nelson <snelson@pensando.io>
Fixes: 7f68d4306701 ("ixgbevf: enable VF IPsec offload operations")
Reported-by: Jonathan Tooker <jonathan@reliablehosting.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accessing the device when it may be runtime suspended is a bug, which is
the case in tmio_mmc_host_remove(). Let's fix the behaviour.
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the
runtime PM status of the device, as to make it reflect the current status
of the HW. This works fine for most cases, but unfortunate not for all.
Especially, there is a generic problem when the device has a genpd attached
and that genpd have the ->start|stop() callbacks assigned.
More precisely, if the driver calls pm_runtime_set_active() during
->probe(), genpd does not get to invoke the ->start() callback for it,
which means the HW isn't really fully powered on. Furthermore, in the next
phase, when the device becomes runtime suspended, genpd will invoke the
->stop() callback for it, potentially leading to usage count imbalance
problems, depending on what's implemented behind the callbacks of course.
To fix this problem, convert to call pm_runtime_get_sync() from
tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to
avoid bumping usage counters and unnecessary re-initializing the HW the
first time the tmio driver's ->runtime_resume() callback is called,
introduce a state flag to keeping track of this.
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
This reverts commit 7ff213193310ef8d0ee5f04f79d791210787ac2c.
It turns out that the above commit introduces other problems. For example,
calling pm_runtime_set_active() must not be done prior calling
pm_runtime_enable() as that makes it fail. This leads to additional
problems, such as clock enables being wrongly balanced.
Rather than fixing the problem on top, let's start over by doing a revert.
Fixes: 7ff213193310 ("mmc: tmio: move runtime PM enablement to the driver implementations")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The userptr put_pages can be called from inside try_to_unmap, and so
enters with the page lock held on one of the object's backing pages. We
cannot take the page lock ourselves for fear of recursion.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Martin Wilck <Martin.Wilck@suse.com>
Reported-by: Leo Kraav <leho@kraav.com>
Fixes: aa56a292ce62 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3 final:
- Constify modes whitelist harder.
- Fix lima driver gem_wait ioctl.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/99e52e7a-d4ce-6a2c-0501-bc559a710955@linux.intel.com
|
|
The ixgbe driver currently does IPsec TX offloading
based on an existing secpath. However, the secpath
can also come from the RX side, in this case it is
misinterpreted for TX offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for TX offload.
Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload")
Reported-by: Michael Marley <michael@michaelmarley.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got a UAF repport in tun driver when doing fuzzy test:
[ 466.269490] ==================================================================
[ 466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[ 466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[ 466.271810]
[ 466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
[ 466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 466.271838] Call Trace:
[ 466.271858] dump_stack+0xca/0x13e
[ 466.271871] ? tun_chr_read_iter+0x2ca/0x2d0
[ 466.271890] print_address_description+0x79/0x440
[ 466.271906] ? vprintk_func+0x5e/0xf0
[ 466.271920] ? tun_chr_read_iter+0x2ca/0x2d0
[ 466.271935] __kasan_report+0x15c/0x1df
[ 466.271958] ? tun_chr_read_iter+0x2ca/0x2d0
[ 466.271976] kasan_report+0xe/0x20
[ 466.271987] tun_chr_read_iter+0x2ca/0x2d0
[ 466.272013] do_iter_readv_writev+0x4b7/0x740
[ 466.272032] ? default_llseek+0x2d0/0x2d0
[ 466.272072] do_iter_read+0x1c5/0x5e0
[ 466.272110] vfs_readv+0x108/0x180
[ 466.299007] ? compat_rw_copy_check_uvector+0x440/0x440
[ 466.299020] ? fsnotify+0x888/0xd50
[ 466.299040] ? __fsnotify_parent+0xd0/0x350
[ 466.299064] ? fsnotify_first_mark+0x1e0/0x1e0
[ 466.304548] ? vfs_write+0x264/0x510
[ 466.304569] ? ksys_write+0x101/0x210
[ 466.304591] ? do_preadv+0x116/0x1a0
[ 466.304609] do_preadv+0x116/0x1a0
[ 466.309829] do_syscall_64+0xc8/0x600
[ 466.309849] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 466.309861] RIP: 0033:0x4560f9
[ 466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[ 466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[ 466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[ 466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[ 466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[ 466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[ 466.323057]
[ 466.323064] Allocated by task 2605:
[ 466.335165] save_stack+0x19/0x80
[ 466.336240] __kasan_kmalloc.constprop.8+0xa0/0xd0
[ 466.337755] kmem_cache_alloc+0xe8/0x320
[ 466.339050] getname_flags+0xca/0x560
[ 466.340229] user_path_at_empty+0x2c/0x50
[ 466.341508] vfs_statx+0xe6/0x190
[ 466.342619] __do_sys_newstat+0x81/0x100
[ 466.343908] do_syscall_64+0xc8/0x600
[ 466.345303] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 466.347034]
[ 466.347517] Freed by task 2605:
[ 466.348471] save_stack+0x19/0x80
[ 466.349476] __kasan_slab_free+0x12e/0x180
[ 466.350726] kmem_cache_free+0xc8/0x430
[ 466.351874] putname+0xe2/0x120
[ 466.352921] filename_lookup+0x257/0x3e0
[ 466.354319] vfs_statx+0xe6/0x190
[ 466.355498] __do_sys_newstat+0x81/0x100
[ 466.356889] do_syscall_64+0xc8/0x600
[ 466.358037] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 466.359567]
[ 466.360050] The buggy address belongs to the object at ffff888372139100
[ 466.360050] which belongs to the cache names_cache of size 4096
[ 466.363735] The buggy address is located 336 bytes inside of
[ 466.363735] 4096-byte region [ffff888372139100, ffff88837213a100)
[ 466.367179] The buggy address belongs to the page:
[ 466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[ 466.371582] flags: 0x2fffff80010200(slab|head)
[ 466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[ 466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 466.377778] page dumped because: kasan: bad access detected
[ 466.379730]
[ 466.380288] Memory state around the buggy address:
[ 466.381844] ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 466.384009] ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 466.388257] ^
[ 466.390234] ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 466.392512] ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 466.394667] ==================================================================
tun_chr_read_iter() accessed the memory which freed by free_netdev()
called by tun_set_iff():
CPUA CPUB
tun_set_iff()
alloc_netdev_mqs()
tun_attach()
tun_chr_read_iter()
tun_get()
tun_do_read()
tun_ring_recv()
register_netdevice() <-- inject error
goto err_detach
tun_detach_all() <-- set RCV_SHUTDOWN
free_netdev() <-- called from
err_free_dev path
netdev_freemem() <-- free the memory
without check refcount
(In this path, the refcount cannot prevent
freeing the memory of dev, and the memory
will be used by dev_put() called by
tun_chr_read_iter() on CPUB.)
(Break from tun_ring_recv(),
because RCV_SHUTDOWN is set)
tun_put()
dev_put() <-- use the memory
freed by netdev_freemem()
Put the publishing of tfile->tun after register_netdevice(),
so tun_get() won't get the tun pointer that freed by
err_detach path if register_netdevice() failed.
Fixes: eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio fixes from Michael Tsirkin:
"Last minute bugfixes.
A couple of security things.
And an error handling bugfix that is never encountered by most people,
but that also makes it kind of safe to push at the last minute, and it
helps push the fix to stable a bit sooner"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: make sure log_num < in_num
vhost: block speculation of translated descriptors
virtio_ring: fix unmap of indirect descriptors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"Hopefully last pin control fix: a single patch for some Aspeed
problems. The BMCs are much happier now"
* tag 'pinctrl-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed: Fix spurious mux failures on the AST2500
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"I don't really like to send so many fixes at the very last minute, but
the bug-sport activity is unpredictable.
Four fixes, three are -stable material that will go everywhere, one is
for the current cycle:
- An ACPI DSDT error fixup of the type we always see and Hans
invariably gets to fix.
- A OF quirk fix for the current release (v5.3)
- Some consistency checks on the userspace ABI.
- A memory leak"
* tag 'gpio-v5.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist
gpiolib: of: fix fallback quirks handling
gpio: fix line flag validation in lineevent_create
gpio: fix line flag validation in linehandle_create
gpio: mockup: add missing single_release()
|
|
Commit 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
was determined to be a partial fix to the problem of acquiring the LPC
Host Controller and GFX regmaps: The AST2500 pin controller may need to
fetch syscon regmaps during expression evaluation as well as when
setting mux state. For example, this case is hit by attempting to export
pins exposing the LPC Host Controller as GPIOs.
An optional eval() hook is added to the Aspeed pinmux operation struct
and called from aspeed_sig_expr_eval() if the pointer is set by the
SoC-specific driver. This enables the AST2500 to perform the custom
action of acquiring its regmap dependencies as required.
John Wang tested the fix on an Inspur FP5280G2 machine (AST2500-based)
where the issue was found, and I've booted the fix on Witherspoon
(AST2500) and Palmetto (AST2400) machines, and poked at relevant pins
under QEMU by forcing mux configurations via devmem before exporting
GPIOs to exercise the driver.
Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers")
Fixes: 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
Reported-by: John Wang <wangzqbj@inspur.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190829071738.2523-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The code assumes log_num < in_num everywhere, and that is true as long as
in_num is incremented by descriptor iov count, and log_num by 1. However
this breaks if there's a zero sized descriptor.
As a result, if a malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash by overflowing the log array. This
bug can be triggered during the VM migration.
There's no need to log when desc.len = 0, so just don't increment log_num
in this case.
Fixes: 3a4d5c94e959 ("vhost_net: a kernel-level virtio server")
Cc: stable@vger.kernel.org
Reviewed-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: ruippan <ruippan@tencent.com>
Signed-off-by: yongduan <yongduan@tencent.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
iovec addresses coming from vhost are assumed to be
pre-validated, but in fact can be speculated to a value
out of range.
Userspace address are later validated with array_index_nospec so we can
be sure kernel info does not leak through these addresses, but vhost
must also not leak userspace info outside the allowed memory table to
guests.
Following the defence in depth principle, make sure
the address is not validated out of node range.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
|
|
Tx code doesn't clear the descriptors' status after cleaning.
So, if the budget is larger than number of used elems in a ring, some
descriptors will be accounted twice and xsk_umem_complete_tx will move
prod_tail far beyond the prod_head breaking the completion queue ring.
Fix that by limiting the number of descriptors to clean by the number
of used descriptors in the Tx ring.
'ixgbe_clean_xdp_tx_irq()' function refactored to look more like
'ixgbe_xsk_clean_tx_ring()' since we're allowed to directly use
'next_to_clean' and 'next_to_use' indexes.
CC: stable@vger.kernel.org
Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
There were a couple cases where the ITR value generated via the adaptive
ITR scheme could exceed 126. This resulted in the value becoming either 0
or something less than 10. Switching back and forth between a value less
than 10 and a value greater than 10 can cause issues as certain hardware
features such as RSC to not function well when the ITR value has dropped
that low.
CC: stable@vger.kernel.org
Fixes: b4ded8327fea ("ixgbe: Update adaptive ITR algorithm")
Reported-by: Gregg Leventhal <gleventhal@janestreet.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
There is a spelling mistake in a mlx4_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
