summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-07-05sfc: Fix memory leak when discarding scattered packetsBen Hutchings
Commit 2768935a4660 ('sfc: reuse pages to avoid DMA mapping/unmapping costs') did not fully take account of DMA scattering which was introduced immediately before. If a received packet is invalid and must be discarded, we only drop a reference to the first buffer's page, but we need to drop a reference for each buffer the packet used. I think this bug was missed partly because efx_recycle_rx_buffers() was not renamed and so no longer does what its name says. It does not change the state of buffers, but only prepares the underlying pages for recycling. Rename it accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Add dt specific phy reset callback support.Srinivas Kandagatla
This patch adds phy reset callback support for stmmac driver via device trees. It adds three new properties to gmac device tree bindings to define the reset signal via gpio. With this patch users can conveniently pass reset gpio number with pre, pulse and post delay in micro secs via DTs. active low: _________ ____________ <pre-delay> |<pulse-delay> |<post-delay> | | |_______________| active high: ________________ <pre-delay> |<pulse-delay> |<post-delay> | | ________| |___________ Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Add support to dwmac version 3.610 and 3.710Srinivas Kandagatla
This patch adds dt support to dwmac version 3.610 and 3.710 these versions are integrated in STiH415 and STiH416 ARM A9 SOCs. To support these IP version, some of the device tree properties are extended. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Allocate platform data only if its NULL.Srinivas Kandagatla
In some DT use-cases platform data might be already allocated and passed via AUXDATA. These are the cases where machine level code populates few callbacks in the platform data. This patch adds check and reuses platform_data if its valid, before allocating a new one. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04net:stmmac: fix memleak in the open methodGiuseppe CAVALLARO
This patch is to fix a memory leak in the open method, it reviews error conditions freeing the resources previously allocated and not freed in cased of DMA failure. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net/mlx4: fix small memory leak on errorDan Carpenter
"work" needs to be freed before returning on this error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: fec: Add VLAN receive HW support.Jim Baxter
This enables the driver to take advantage of the FEC VLAN indicator to improve performance. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03alx: remove WoL supportJohannes Berg
Unfortunately, WoL is broken and the system will immediately resume after suspending, and I can't seem to figure out why. Remove WoL support until the issue can be found. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02stmmac: dity-up and rework the driver debug levelsGiuseppe CAVALLARO
Prior this patch, the internal debugging was based on ifdef and also some printk were useless because many info are exposed via ethtool. This patch remove all the ifdef defines and now we only use netif_msg_XXX levels. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02nlmon: use standard rtnetlink link api for add/del devicesJiri Pirko
It is not nice when netdev is created right after module load and with some implicit name. So rather change nlmon to use standard rtnl link API. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix RMON registers on imx6Jim Baxter
commit 38ae92d "fec: Add support for reading RMON registers" causes the imx6Q to crash. This fixes it by only enabling the RMON registers, the registers are already cleared by the MAC being reset. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02cxgb3: Missing rtnl lock in error recoveryBenjamin Herrenschmidt
When exercising error injection on IBM pseries machine, I hit the following warning: [ 251.450043] RTAS: event: 89, Type: Platform Error, Severity: 2 [ 253.549822] cxgb3 0006:01:00.0: enabling device (0140 -> 0142) [ 253.713560] cxgb3 0006:01:00.0: adapter recovering, PEX ERR 0x100 [ 254.895437] RTNL: assertion failed at net/core/dev.c (2031) [ 254.895467] CPU: 6 PID: 5449 Comm: eehd Tainted: G W 3.10.0-rc7-00157-gea461ab #19 [ 254.895474] Call Trace: [ 254.895483] [c000000fac56f7d0] [c000000000014dcc] .show_stack+0x7c/0x1f0 (unreliable) [ 254.895493] [c000000fac56f8a0] [c0000000007ba318] .dump_stack+0x28/0x3c [ 254.895500] [c000000fac56f910] [c0000000006c0384] .netif_set_real_num_tx_queues+0x224/0x230 [ 254.895515] [c000000fac56f9b0] [d00000000ef35510] .cxgb_open+0x80/0x3f0 [cxgb3] [ 254.895525] [c000000fac56fa50] [d00000000ef35914] .t3_resume_ports+0x94/0x100 [cxgb3] [ 254.895533] [c000000fac56fae0] [c00000000005fc8c] .eeh_report_resume+0x8c/0xd0 [ 254.895539] [c000000fac56fb60] [c00000000005e9fc] .eeh_pe_dev_traverse+0x9c/0x190 [ 254.895545] [c000000fac56fc10] [c000000000060000] .eeh_handle_event+0x110/0x330 [ 254.895551] [c000000fac56fca0] [c000000000060350] .eeh_event_handler+0x130/0x1a0 [ 254.895558] [c000000fac56fd30] [c0000000000ad758] .kthread+0xe8/0xf0 [ 254.895566] [c000000fac56fe30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x80 It appears that t3_resume_ports() is called with the rtnl_lock held from the fatal error task but not from the PCI error callbacks. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: cdc_ether: allow combined control and data interfaceBjørn Mork
Some Icera based Huawei modems handled by this driver are not completely CDC ECM compliant, using the same USB interface for both control and data. The CDC functional descriptors include a Union naming this interface as both master and slave, so it is supportable by relaxing the descriptor parsing in case these interfaces are identical. This has been tested on a Huawei K3806 and verified to add support for that device. Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix Transmitted bytes counterJim Baxter
The tx_bytes field was not being updated so the network card statistics showed 0.0B transmitted. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: ethernet: davinci_emac: remove redundant dev_err call in ↵Wei Yongjun
davinci_emac_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02xen-netback: xenbus.c: use more current logging stylesWei Liu
Convert one printk to pr_<level>. Add a missing newline in several places to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: ipheth: Add USB ID for iPad miniAaron Marburg
Adds the USB device ID (0x12ab) to the ipheth network-over-USB-tethering driver for iOS devices. Applied and tested against mainline tag v3.10 (as well as 3.8.x and 3.6.y kernel for Raspbian on Raspberry pi) Signed-off-by: Aaron Marburg <amarburg@notetofutureself.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: fill in sane dump flag informationMichal Schmidt
bnx2x did not set dump->version in its .get_dump_flag() method. Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice number (0x50acff01 currently), but at least it's something deterministic. dump->flag should report the value previously set using ethtool -W. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: fix dump flag handlingMichal Schmidt
bnx2x interprets the dump flag as an index of a register preset. It is important to validate the index to avoid out of bounds memory accesses. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: remove zeroing of dump data bufferMichal Schmidt
There is no need to initialize the dump data with zeros. data is allocated with vzalloc, so it's already zero-filled. More importantly, the memset is harmful, because dump->len (the length requested by userspace) can be bigger than the allocated buffer (whose size is determined by asking the driver's .get_dump_flag method). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01cassini: Make missing firmware non-fatalBen Hutchings
The firmware patch for the Saturn PHY fixes a bug, but is not absolutely essential. And its licence is unclear, so it is not included in all distributions. Just log an error message and continue if it is missing or invalid. References: http://bugs.debian.org/712674 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Jose Andres Arias Velichko <Andres.Arias@PaisLinux.net> (against 3.2) Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01qmi_wwan: add ONDA MT689DC device ID (fwd)Enrico Mioso
Another QMI-speaking device by ZTE, re-branded by ONDA! I'm connected ovr this device's QMI interface right now, so I can say I tested it! :) Note: a follow-up patch was posted to the linux-usb mailing list, to prevent the option driver from binding to the device's QMI interface, making it unusable. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/vxlan-next Stephen Hemminger says: ==================== Here is current updates for vxlan in net-next. It includes Mike's changes to handle multiple destinations and lots of little cosmetic stuff. This is a fresh vxlan-next repository which was forked from net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: add TP-LINK MA260Bjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: add Option GTM681WBjørn Mork
A standard Gobi 3000 reference design module. Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: fixup Sierra Wireless MC8305 entryBjørn Mork
The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by: Lana Black <sickmind@lavabit.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: stmmac: fixed enh_desc set always zeroByungho An
This patch fixed that enh_desc value is always zero. Due to calling order of stmmac_selec_desc_mode(), enh_desc value is always zero. Even though mac is set to use enhanced dma descriptor, if enh_desc is zero, functions related dma descriptor are not working correctly. Signed-off-by: Byungho An <bh74.an@samsung.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: stmmac: fixed operator typoByungho An
This patch fixed operator typo from & to ==. Due to incorrect operator, the result is incorrect. Signed-off-by: Byungho An <bh74.an@samsung.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01xen: Use more current logging stylesJoe Perches
Instead of mixing printk and pr_<level> forms, just use pr_<level> Miscellaneous changes around these conversions: Add a missing newline to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: fec: Fix multicast list setup in fec_restart().Christoph Müllner
Setup the multicast list of the net_device instead of clearing it blindly. This restores the multicast groups in case of a link down/up event or when resuming from suspend. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Yet one more pull request for wireless updates intended for 3.11... For the mac80211 bits, Johannes says: "Here we have a few memory leak fixes related to BSS struct handling mostly from Ben, including a fix for a more theoretical problem (associating while a BSS struct times out) from myself, a compilation warning fix from Arend, mesh fixes from Thomas, tracking the beacon bitrate (Alex), a bandwidth change event fix (Ilan) and some initial work for 5/10 MHz channels from Simon." Regarding the iwlwifi bits, Johannes says: "Emmanuel removed some unneeded/unsupported module parameters and adds a Bluetooth 1x1 lookup-table for some upcoming products. From Alex I have an older patch to add low-power receive support, this depended on a mac80211 commit that only just came in with the merge from wireless-next I did. Ilan made beacon timings better, and Eytan added some debug statements for thermal throttling. I have a few cleanups, a fix for a long-standing but rare warning, and, arguably the most important patch here, the firmware API version bump for the 7260/3160 devices." Also included is a Bluetooth pull -- Gustavo says: "Here goes a set of patches to 3.11. The biggest work here is from Andre Guedes on the move of the Discovery to use the new request framework. Other than that Johan provided a bunch of fixes to the L2CAP code. The rest are just small fixes and clean ups." On top of all that, there are a variety of updates and fixes to brcmfmac, rt2x00, wil6210, ath9k, ath10k, and a few others here and there. This also includes a pull of the wireless tree, in order to prevent some merge conflicts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix ethtool support codeJohannes Berg
A number of places treated features wrongly, listing not-supported features instead of supported ones. Also, the get_drvinfo ethtool callback isn't needed, and alx_get_pauseparam can be simplified. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix MAC address alignment problemJohannes Berg
In two places, parts of MAC addresses are used as u32/u16 values. This can cause alignment problems, use put_unaligned and get_unaligned to fix this. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: separate link speed/duplex fieldsJohannes Berg
As suggested by Ben Hutchings, use separate fields to track current link speed and duplex setting. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: make sizes unsignedJohannes Berg
The ring sizes should be unsigned, pointed out by Ben Hutchings. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: remove NET_CORE Kconfig selectJohannes Berg
That select doesn't make any sense, remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix 100mbit/half duplex speed translationJohannes Berg
100mbit half duplex is ADVERTISED_100baseT_Half, not ADVERTISED_10baseT_Half. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: treat flow control correctly in alx_set_pauseparam()Johannes Berg
Even when alx_setup_speed_duplex() is called, we still need to call alx_cfg_mac_flowcontrol() and set hw->flowctrl if flow control changed. This was a bug I accidentally introduced while simplifying the original driver. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net/mlx4_core: Add HW enforcement to VF link stateRony Efraim
When the firmware supports the UPDATE_QP command, if the VF link is disabled, block all QPs opened by the VF, by programming the UPDATE_QP command to drop all RX & TX traffic to/from these QPs. Operates only in VST mode. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net/mlx4_core: Dynamic VST to VST vlan/qos changesJack Morgenstein
Within VST mode, enable modifying the vlan and/or qos for a VF without requiring unbind/rebind. This requires firmware which supports the UPDATE_QP command. (If the command is not available, we fall back to requiring unbind/bind to activate these changes). To avoid race conditions with modify-qp on QPs that are affected by update-qp, this operation is performed on the comm_wq. If the update operation succeeds for all the necessary QPs, a vlan_unregister is performed for the abandoned vlan id. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of seven bug fixes. Several fcoe fixes for locking problems, initiator issues and a VLAN API change, all of which could eventually lead to data corruption, one fix for a qla2xxx locking problem which could lead to multiple completions of the same request (and subsequent data corruption) and a use after free in the ipr driver. Plus one minor MAINTAINERS file update" (only six bugfixes in this pull, since I had already pulled the fcoe API fix directly from Robert Love) * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] ipr: Avoid target_destroy accessing memory after it was freed [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines MAINTAINERS: Fix fcoe mailing list libfc: extend ex_lock to protect all of fc_seq_send libfc: Correct check for initiator role libfcoe: Fix Conflicting FCFs issue in the fabric
2013-06-29bonding: combine pr_debugs in bond_set_dev_addr into oneNikolay Aleksandrov
Combine the multiple pr_debugs in bond_set_dev_addr into one pr_debug. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm/qxl fix from Dave Airlie: "Bad me forgot an access check, possible security issue, but since this is the first kernel with it, should be fine to just put it in now" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: add missing access check for execbuffer ioctl
2013-06-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This is a recently spotted regression in the snapshot behavior... It turns out several tests weren't being run in the nightlies so this took a while to spot" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: send snapshot context with writes
2013-06-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. It consists of three patches by Fabio Estevam and me, which convert the flexcan transceiver switching to DT[1] and a patch by Sachin Kamat, which cleans up the at91_can driver a bit. [1] These patches touch arch/arm/mach-imx, so I collected Acked-bys from Shawn Guo and Sascha Hauer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28ssb/trivial: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28net/trivial: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28nlmon: fix comparison in nlmon_is_valid_mtuDaniel Borkmann
This patch fixes the following warning introduced in e4fc408e0e99 ("packet: nlmon: virtual netlink monitoring device for packet sockets") reported by Dan Carpenter: warning: "drivers/net/nlmon.c:31 nlmon_is_valid_mtu() warn: always true condition '(new_mtu <= ((~0 >> 1))) => (s32min-s32max <= s32max)'" Thus, we should simply remove the test against INT_MAX. Next to that we also need to explicitly cast the sizeof() case as the comparison is type promoted to unsigned long so negative values are then valid instead of invalid. While at it, this also adds a comment about Netlink and MTUs. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28drivers: net: cpsw: add newline after MACID logDaniel Mack
Cosmetic patch to add a newline after logging the device's MACID. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-10-23 23:12:39 +0000