| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Don't include __GFP_NOWARN for loop worker allocation, as it already
uses GFP_NOWAIT which has __GFP_NOWARN set already
- Small series cleaning up the recent bio_iov_iter_get_pages() changes
- loop fix for leaking the backing reference file, if validation fails
- Update of a comment pertaining to disk/partition stat locking
* tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: remove redundant __GFP_NOWARN flag
block: move bio_iov_iter_get_bdev_pages to block/fops.c
iomap: open code bio_iov_iter_get_bdev_pages
block: rename bio_iov_iter_get_pages_aligned to bio_iov_iter_get_pages
block: remove bio_iov_iter_get_pages
block: Update a comment of disk statistics
loop: fix backing file reference leak on validation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the usual bunch of smaller bug fixes, the majority of changes
were by Zsolt Kajtar to improve the s3fb driver.
Bug fixes:
- Bounds checking to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: use signed type for error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)"
* tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix logic error in "offb" name match
fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
fbdev: Make drivers depend on LCD_CLASS_DEVICE
fbdev: radeonfb: Remove stale product link in Kconfig
Documentation: fb: Retitle driver docs
Documentation: fb: ep93xx: Demote section headings
Documentation: fb: Split toctree
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
fbdev: s3fb: Revert mclk stop in suspend
fbdev: mb862xxfb: Use int type to store negative error codes
fbdev: Use string choices helpers
fbdev: core: Fix ubsan warning in pixel_to_pat
fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP
fbdev: s3fb: Implement powersave for S3 FB
fbdev: xenfb: Use vmalloc_array to simplify code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add a missing ACPI ID for MTL-CVF devices in gpio-usbio
- mark the gpio-wcd934x controller as "sleeping" as it uses a mutex for
locking internally
* tag 'gpio-fixes-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: wcd934x: mark the GPIO controller as sleeping
gpio: usbio: Add ACPI device-id for MTL-CVF devices
|
|
Pull NTB updates from Jon Mason:
- Add support for Renesas R-Car and allow arbitrary BAR mapping in EPF
- Update ntb_hw_amd to support the latest generation secondary topology
and add a new maintainer
- Fix a bug by adding a mutex to ensure `link_event_callback` executes
sequentially
* tag 'ntb-6.18' of https://github.com/jonmason/ntb:
NTB: epf: Add Renesas rcar support
NTB: epf: Allow arbitrary BAR mapping
ntb: Add mutex to make link_event_callback executed linearly.
MAINTAINERS: Update for the NTB AMD driver maintainer
ntb_hw_amd: Update amd_ntb_get_link_status to support latest generation secondary topology
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
|
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Reads on tpm/tpm0/ppi/*operations can become very long on
misconfigured systems. Reading the TPM is a blocking operation,
thus a user could effectively trigger a DOS.
Resolve this by caching the results and avoiding the blocking
operations after the first read.
[ jarkko: fixed atomic sleep:
sed -i 's/spin_/mutex_/g' drivers/char/tpm/tpm_ppi.c
sed -i 's/DEFINE_SPINLOCK/DEFINE_MUTEX/g' drivers/char/tpm/tpm_ppi.c ]
Signed-off-by: Denis Aleksandrov <daleksan@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Closes: https://lore.kernel.org/linux-integrity/20250915210829.6661-1-daleksan@redhat.com/T/#u
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current shenanigans for duration calculation introduce too much
complexity for a trivial problem, and further the code is hard to patch and
maintain.
Address these issues with a flat look-up table, which is easy to understand
and patch. If leaf driver specific patching is required in future, it is
easy enough to make a copy of this table during driver initialization and
add the chip parameter back.
'chip->duration' is retained for TPM 1.x.
As the first entry for this new behavior address TCG spec update mentioned
in this issue:
https://github.com/raspberrypi/linux/issues/7054
Therefore, for TPM_SelfTest the duration is set to 3000 ms.
This does not categorize a as bug, given that this is introduced to the
spec after the feature was originally made.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Now that there are easy-to-use HMAC-SHA256 library functions, use these
in tpm2-sessions.c instead of open-coding the HMAC algorithm.
Note that the new implementation correctly handles keys longer than 64
bytes (SHA256_BLOCK_SIZE), whereas the old implementation handled such
keys incorrectly. But it doesn't appear that such keys were being used.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In tpm_buf_check_hmac_response(), compare the HMAC values in constant
time using crypto_memneq() instead of in variable time using memcmp().
This is worthwhile to follow best practices and to be consistent with
MAC comparisons elsewhere in the kernel. However, in this driver the
side channel seems to have been benign: the HMAC input data is
guaranteed to always be unique, which makes the usual MAC forgery via
timing side channel not possible. Specifically, the HMAC input data in
tpm_buf_check_hmac_response() includes the "our_nonce" field, which was
generated by the kernel earlier, remains under the control of the
kernel, and is unique for each call to tpm_buf_check_hmac_response().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade3a ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Compile the decompressor with -Wno-pointer-sign flag to avoid a clang
warning
- Fix incomplete conversion to flag output macros in __xsch(), to avoid
always zero return value instead of the expected condition code
- Remove superfluous newlines from inline assemblies to improve
compiler inlining decisions
- Expose firmware provided UID Checking state in sysfs regardless of
the device presence or state
- CIO does not unregister subchannels when the attached device is
invalid or unavailable. Update the purge function to remove I/O
subchannels if the device number is found on cio_ignore list
- Consolidate PAI crypto allocation and cleanup paths
- The uv_get_secret_metadata() function has been removed some few
months ago, remove also the function mention it in a comment
* tag 's390-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uv: Fix comment of uv_find_secret() function
s390/pai_crypto: Consolidate PAI crypto allocation and cleanup paths
s390/cio: Update purge function to unregister the unused subchannels
s390/pci: Expose firmware provided UID Checking state in sysfs
s390: Remove superfluous newlines from inline assemblies
s390/cio/ioasm: Fix __xsch() condition code handling
s390: Add -Wno-pointer-sign to KBUILD_CFLAGS_DECOMPRESSOR
|
|
Add "INTC10D1" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add missing configuration for loopback mode in airhoha_set_gdm2_loopback
routine.
Fixes: 9cd451d414f6e ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251008-airoha-loopback-mode-fix-v2-1-045694fe7f60@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rx processing under normal circumstances has 3 rings - 2 buffer
rings (heads, payloads) and a completion ring. All the rings
have a struct fbnic_ring. Make sure we expose alloc_failed
counter from the buffer rings, previously only the alloc_failed
from the completion ring was reported, even tho all ring types
may increment this counter (buffer rings in __fbnic_fill_bdq()).
This makes the pp_alloc_fail.py test pass, it expects the qstat
to be incrementing as page pool injections happen.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 67dc4eb5fc92 ("eth: fbnic: report software Rx queue stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rings are freed - stats get added to the device level stat
structs. Save the stats from the XDP_TX ring just as Tx stats.
Previously they would be saved to Rx and Tx stats. So we'd not
see XDP_TX packets as Rx during runtime but after an down/up cycle
the packets would appear in stats.
Correct the helper used by ethtool code which does a runtime
config switch.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff086344 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make XDP-handled packets appear in the Rx stats. The driver has been
counting XDP_TX packets on the Tx ring, but there wasn't much accounting
on the Rx side (the Rx bytes appear to be incremented on XDP_TX but
XDP_DROP / XDP_ABORT are only counted as Rx drops).
Counting XDP_TX packets (not just bytes) in Rx stats looks like
a simple bug of omission.
The XDP_DROP handling appears to be intentional. Whether XDP_DROP
packets should be counted in interface-level Rx stats is a bit
unclear historically. When we were defining qstats, however,
we clarified based on operational experience that in this context:
name: rx-packets
doc: |
Number of wire packets successfully received and passed to the stack.
For drivers supporting XDP, XDP is considered the first layer
of the stack, so packets consumed by XDP are still counted here.
fbnic does not obey this requirement. Since XDP support has been added
in current release cycle, instead of splitting interface and qstat
handling - make them both follow the qstat definition.
Another small tweak here is that we count bytes as received on the wire
rather than post-XDP bytes (xdp_get_buff_len() vs skb->len).
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff086344 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
XDP_TX typically uses no offloads. To optimize XDP we added a "default
descriptor" feature to the chip, which allows us to send XDP frames with
just the buffer descriptors (DMA address + length). All the metadata
descriptors are derived from the queue config.
Commit under Fixes missed adding setting the defaults up when transplanting
the code from the prototype driver. Importantly after reset the "request
completion" bit is not set. Packets still get sent but there's no
completion, so ring is not cleaned up. We can send one ring's worth
of packets and then will start dropping all frames that got the XDP_TX
action from the XDP prog.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 168deb7b31b2 ("eth: fbnic: Add support for XDP_TX action")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix a resource lookup regression that broke enumeration of hotplugged
Thunderbolt devices on several platforms (Yangyu Chen)
* tag 'pci-v6.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix regression in pci_bus_distribute_available_resources()
|
|
The refactoring in 4292a1e45fd4 ("PCI: Refactor distributing available
memory to use loops") switched pci_bus_distribute_available_resources() to
operate on an array of bridge windows. That accidentally looked up bus
resources via pci_bus_resource_n() and then passed those pointers to helper
routines that expect the resource to belong to the device. As soon as we
execute that code, pci_resource_num() warned because the resource wasn't in
the bridge's resource array.
This happens on my AMD Strix Halo machine with Thunderbolt device; the
error message is shown below:
WARNING: CPU: 6 PID: 272 at drivers/pci/pci.h:471 pci_bus_distribute_available_resources+0x6ad/0x6d0
CPU: 6 UID: 0 PID: 272 Comm: irq/33-pciehp Not tainted 6.17.0+ #1 PREEMPT(voluntary)
Hardware name: PELADN YO Series/YO1, BIOS 1.04 05/15/2025
RIP: 0010:pci_bus_distribute_available_resources+0x6ad/0x6d0
Call Trace:
pci_bus_distribute_available_resources+0x590/0x6d0
pci_bridge_distribute_available_resources+0x62/0xb0
pci_assign_unassigned_bridge_resources+0x65/0x1b0
pciehp_configure_device+0x92/0x160
pciehp_handle_presence_or_link_change+0x1b5/0x350
pciehp_ist+0x147/0x1c0
Fix the regression by always fetching the resource directly from the bridge
with pci_resource_n(bridge, PCI_BRIDGE_RESOURCES + i). This restores the
original behaviour while keeping the refactored structure. Then we can
successfully assign resources to the Thunderbolt device.
Fixes: 4292a1e45fd4 ("PCI: Refactor distributing available memory to use loops")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/dd551b81-9e81-480b-aab3-7cf8b8bbc1d0@panix.com
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
[bhelgaas: trim timestamps, etc from commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://lore.kernel.org/r/F833CC81-7C60-48FC-A31C-B9999DCC6FA2@icloud.com
Link: https://patch.msgid.link/tencent_8C54420E1B0FF8D804C1B4651DF970716309@qq.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- Qualcomm: add Glymur CPUCP mailbox binding
- Xilinx Zynq: misc cleanup
- MediaTek:
- add new GPUEB mailbox driver
- cmdq: remove pm_runtime calls from send_data
- gce: make clock-names optional
- misc:
- change mailbox-altera maintainer
- remove redundant 'fast_io' in regmap_config
- mhuv3: Remove no_free_ptr
* tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()
mailbox: add MediaTek GPUEB IPI mailbox
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes
mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call
mailbox: remove unneeded 'fast_io' parameter in regmap_config
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
MAINTAINERS: Change mailbox-altera maintainer
mailbox: arm_mhuv3: Remove no_free_ptr() to maintain the original form of the pointer
|
|
Pull more VFIO updates from Alex Williamson:
- Optimizations for DMA map and unmap opertions through the type1 vfio
IOMMU backend.
This uses various means of batching and hints from the mm structures
to improve efficiency and therefore performance, resulting in a
significant speedup for huge page use cases (Li Zhe)
- Expose supported device migration features through debugfs (Cédric Le
Goater)
* tag 'vfio-v6.18-rc1-pt2' of https://github.com/awilliam/linux-vfio:
vfio: Dump migration features under debugfs
vfio/type1: optimize vfio_unpin_pages_remote()
vfio/type1: introduce a new member has_rsvd for struct vfio_dma
vfio/type1: batch vfio_find_vpfn() in function vfio_unpin_pages_remote()
vfio/type1: optimize vfio_pin_pages_remote()
mm: introduce num_pages_contiguous()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix zstd regression
- Ensure ti driver algorithm are set as async
- Revert patch disabling SHA1 in FIPS mode
- Fix RNG set_ent null-pointer dereference
* tag 'v6.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rng - Ensure set_ent is always present
Revert "crypto: testmgr - desupport SHA-1 for FIPS 140"
crypto: ti - Add CRYPTO_ALG_ASYNC flag to DTHEv2 AES algos
crypto: zstd - Fix compression bug caused by truncation
|
|
GFP_NOWAIT already includes __GFP_NOWARN, so let's remove the
redundant __GFP_NOWARN.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare input updates for 6.18 merge window.
|
|
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The TPS23881 improves on the TPS23880 with current sense resistors reduced
from 255 mOhm to 200 mOhm. This has a direct impact on the scaling of the
current measurement. However, the latest TPS23881 data sheet from May 2023
still shows the scaling of the TPS23880 model.
Fixes: 7f076ce3f1733 ("net: pse-pd: tps23881: Add support for power limit and measurement features")
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251006204029.7169-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Old binutils versions require a slightly stricter syntax for the .arch_extension
directive and fail with the extra semicolon:
/tmp/cclfMnj9.s:656: Error: unknown architectural extension `simd;'
Drop the semicolon to make it work with all supported toolchain version.
Link: https://lore.kernel.org/all/20251001163655.GA370262@ax162/
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: fd8c8216648c ("net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/20251006115640.497169-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small nvmem and fastrpc fixes that missed the cut-off to
get into 6.17-final, due to me being slow in getting them out, my
fault, not the maintainers of these subsystems :(
Anyway, better late than never. Changes included in here are:
- nvmem fix for automatic module loading
- fastrpc driver fixes for reported issues
All of these have been in linux-next for weeks (4?) with no reported
issues"
* tag 'char-misc-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: fastrpc: Skip reference for DMA handles
misc: fastrpc: fix possible map leak in fastrpc_put_args
misc: fastrpc: Fix fastrpc_map_lookup operation
misc: fastrpc: Save actual DMA size in fastrpc_map structure
nvmem: layouts: fix automatic module loading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes that missed 6.17-final due to my
travel schedule. They fix a number of reported issues in the axis-fifo
driver, one of which was just independently discovered by someone else
today so someone is looking at this code.
All of these fixes have been in linux-next for many weeks with no
reported issues"
* tag 'staging-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: flush RX FIFO on read errors
staging: axis-fifo: fix TX handling on copy_from_user() failure
staging: axis-fifo: fix maximum TX packet length check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty driver fix from Greg KH:
"Here is a single driver fix for the qcom_geni_serial driver. It has
been in my tree for weeks, but missed being sent to you for 6.17-final
due to travel on my side.
This fixes a reported regression for this driver that prevents 6.17
from working properly on this platform.
It has been in linux-next for many weeks with no reported issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: Fix blocked task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a driver bug, clean up two pieces of code and improve the
fwnode API consistency:
- Add missing synchronization between interface updates in the ACPI
battery driver (Rafael Wysocki)
- Remove open coded check for cpu_feature_enabled() from
acpi_processor_power_init_bm_check() (Mario Limonciello)
- Remove redundant rcu_read_lock/unlock() under spinlock from
ghes_notify_hed() in the ACPI APEI support code (pengdonglin)
- Make the .get_next_child_node() callback in the ACPI fwnode backend
skip ACPI devices that are not present for consistency with the
analogous callback in the OF fwnode backend (Sakari Ailus)"
* tag 'acpi-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Return present device nodes only on fwnode interface
ACPI: APEI: Remove redundant rcu_read_lock/unlock() under spinlock
ACPI: battery: Add synchronization between interface updates
x86/acpi/cstate: Remove open coded check for cpu_feature_enabled()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Preserve old 'tt_core' UAPI for Hisilicon L3C PMU driver
- Ensure linear alias of kprobes instruction page is not writable
- Fix kernel stack unwinding from BPF
- Fix build warnings from the Fujitsu uncore PMU documentation
- Fix hang with deferred 'struct page' initialisation and MTE
- Consolidate KPTI page-table re-writing code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not flag the zero page as PG_mte_tagged
docs: perf: Fujitsu: Fix htmldocs build warnings and errors
arm64: mm: Move KPTI helpers to mmu.c
tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64
arm64: kprobes: call set_memory_rox() for kprobe page
drivers/perf: hisi: Add tt_core_deprecated for compatibility
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
|
|
pm_runtime_get_sync() and pm_runtime_put_autosuspend() were previously
called in cmdq_mbox_send_data(), which is under a spinlock in msg_submit()
(mailbox.c). This caused lockdep warnings such as "sleeping function
called from invalid context" when running with lockdebug enabled.
The BUG report:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1164
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3616, name: kworker/u17:3
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
CPU: 1 PID: 3616 Comm: kworker/u17:3 Not tainted 6.1.87-lockdep-14133-g26e933aca785 #1
Hardware name: Google Ciri sku0/unprovisioned board (DT)
Workqueue: imgsys_runner imgsys_runner_func
Call trace:
dump_backtrace+0x100/0x120
show_stack+0x20/0x2c
dump_stack_lvl+0x84/0xb4
dump_stack+0x18/0x48
__might_resched+0x354/0x4c0
__might_sleep+0x98/0xe4
__pm_runtime_resume+0x70/0x124
cmdq_mbox_send_data+0xe4/0xb1c
msg_submit+0x194/0x2dc
mbox_send_message+0x190/0x330
imgsys_cmdq_sendtask+0x1618/0x2224
imgsys_runner_func+0xac/0x11c
process_one_work+0x638/0xf84
worker_thread+0x808/0xcd0
kthread+0x24c/0x324
ret_from_fork+0x10/0x20
Additionally, pm_runtime_put_autosuspend() should be invoked from the
GCE IRQ handler to ensure the hardware has actually completed its work.
To resolve these issues, remove the pm_runtime calls from
cmdq_mbox_send_data() and delegate power management responsibilities
to the client driver.
Fixes: 8afe816b0c99 ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
PSP support requires a set of cap bits to be set, otherwise an init
error is logged.
But logging an error when PSP cannot be initialized is too much, and not
in line with other features. If a feature cannot be initialized because
it is not supported, that's not an error. An error should only be
printed when the feature cannot be initialized because of an actual
error.
Fixes: 89ee2d92f66c ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759652999-858513-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When configuring IPsec packet offload in tunnel mode, the driver tries
to create tunnel reformat objects unconditionally. This is incorrect,
because tunnel mode is only permitted under specific encapsulation
settings, and that decision is already made when the flow table is
created.
The offending commit attempted to block this case in the state add
path, but the check there happens too late and does not prevent the
reformat from being configured.
Fix by taking short reservations for both the eswitch mode and the
encap at the start of state setup. This preserves the block ordering
(mode --> encap) used later: the mode is blocked during RX/TX get, and
the encap is blocked during flow-table creation. This lets us fail
early if either reservation cannot be obtained, it means a mode
transition is underway or a conflicting configuration already owns
encap. If both succeed, the flow-table path later takes the ownership
and the reservations are released on exit.
Fixes: 146c196b60e4 ("net/mlx5e: Create IPsec table with tunnel support only when encap is disabled")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759652999-858513-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When creating IPsec flow tables with tunnel mode enabled, the driver
uses mlx5_eswitch_block_encap() to prevent tunnel encapsulation
conflicts across different domains (NIC_RX/NIC_TX and FDB), since the
firmware doesn’t allow both at the same time.
Currently, the driver attempts to reserve tunnel mode unconditionally
for both NIC and FDB IPsec tables. This can lead to conflicting tunnel
mode setups, for example, if a flow table was created in the FDB
domain with tunnel offload enabled, and we later try to create another
one in the NIC, or vice versa.
To resolve this, adjust the blocking logic so that tunnel mode is only
reserved by NIC flows. This ensures that tunnel offload is exclusively
used in either the NIC or the FDB, and avoids unintended offload
conflicts.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759652999-858513-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge an x86 cleanup related to ACPI, an ACPI battery driver fix, an
ACPI APEI cleanup, and an ACPI device properties handling update for
6.18-rc1:
- Remove open coded check for cpu_feature_enabled() from
acpi_processor_power_init_bm_check() (Mario Limonciello)
- Add missing synchronization between interface updates in the ACPI
battery driver (Rafael Wysocki)
- Remove redundant rcu_read_lock/unlock() under spinlock from
ghes_notify_hed() in the ACPI APEI support code (pengdonglin)
- Make the .get_next_child_node() callback in the ACPI fwnode backend
skip ACPI devices that are not present for consistency with the
analogous callback in the OF fwnode backend (Sakari Ailus)
* acpi-x86:
x86/acpi/cstate: Remove open coded check for cpu_feature_enabled()
* acpi-battery:
ACPI: battery: Add synchronization between interface updates
* acpi-apei:
ACPI: APEI: Remove redundant rcu_read_lock/unlock() under spinlock
* acpi-property:
ACPI: property: Return present device nodes only on fwnode interface
|
|
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before.
Fixes: 4a2c7217cd5a ("net: usb: asix: ax88772: manage PHY PM from MAC")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge cpufreq fixes and cleanups, mostly on top of those fixes, for
6.18-rc1:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6 cycle
that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency() to
indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
* pm-cpufreq:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
|
|
Merge runtime PM framework updates and a core power management code fix
for 6.18-rc1:
- Make pm_runtime_put*() family of functions return 1 when the
given device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update return
values in kerneldoc coments for the runtime PM API (Brian Norris,
Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)
* pm-core:
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
* pm-runtime:
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
