summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-07-10x86 platform drivers: fix gpio leakLibo Chen
when request_irq fails, we should release gpiochip v2: fix warning: ignoring return value of 'gpiochip_remove Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10toshiba_acpi: Add dependency on SERIO_I8042Seth Forshee
Configuring this option as a module with ACPI_TOSHIBA built-in results in the following errors: drivers/built-in.o: In function `toshiba_acpi_remove': >> toshiba_acpi.c:(.text+0x314bb0): undefined reference to `i8042_remove_filter' drivers/built-in.o: In function `toshiba_acpi_add': >> toshiba_acpi.c:(.devinit.text+0xb822): undefined reference to `i8042_install_filter' >> toshiba_acpi.c:(.devinit.text+0xb98b): undefined reference to `i8042_remove_filter' Add a dependency to prevent ACPI_TOSHIBA from being built-in when SERIO_I8042=m. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/UAceLan Kao
Need to set wapf to 4 for ASUSTeK COMPUTER INC. 1015E/U, so that user can toggle wifi function through function key correctly. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10Add trivial driver to disable Intel Smart ConnectMatthew Garrett
Intel Smart Connect is an Intel-specific ACPI interface for configuring devices to wake up at regular intervals so they can pull down mail or other internet updates, and then go to sleep again. If a user enables this in Windows and then reboots into Linux, the device may wake up if it's put to sleep. Since there's no Linux userland support for any of this, the machine will then remain awake until something else puts it back to sleep. I haven't figured out all that much about how this works (there's a bunch of different ACPI calls available on the device), but this seems to be enough to turn it off. We can add more features to this driver if anyone ever cares about figuring out what the rest of the calls do or writing some Linux userspace to implement the rest of it. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10Add support driver for Intel Rapid Start TechnologyMatthew Garrett
Intel Rapid Start Technology is a firmware-based suspend-to-disk implementation. Once placed in S3, the device will wake once either a timeout elapses or the battery reaches a critical level. It will then resume to the firmware and copy the contents of RAM to a specialised partition, and then power off the machine. If the user turns the machine back on the firmware will copy the contents of the partition back to RAM and then resume from S3 as normal. This driver provides an interface for configuring the wakeup events and timeout. It still requires firmware support and an appropriate suspend partition. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10hp-wmi: add supports for POST code errorAlex Hung
HP laptops include a POST code error query 0x2A that reports which point BIOS fails to boot at. The error code is kept in CMOS until it is cleared. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-wmi: control wlan-led only if wapf == 4AceLan Kao
Controlling the wlan led seems to have some side effects to the machines with wapf value is not equal to 4. It will make the keyboard backlight out of order. So, the patch will enable the wlan led function only if the wapf == 4. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=46791 Reported-by: Mirto Silvio Busico <m.busico@ieee.org> Tested-by: Karol Herbst <karolherbst@me.com> Tested-by: drunkenbatman <drunkenbatman@gmail.com> Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10drivers/platform/x86/intel_ips: Convert to module_pci_driverLibo Chen
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-nb-wmi: ignore ALS notification key codeViktar Vauchkevich
Ignore Ambient Light Sensor notification key code 0xC6 found in ASUS UX31a. When the illuminance changes dmesg shows: [10814.939979] asus_wmi: Unknown key c6 pressed Signed-off-by: Viktar Vauchkevich <victorenator@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-wmi: append newline to messagesvic
Append newline to messages. Signed-off-by: Viktar Vauchkevich <victorenator@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10x86: asus-laptop: fix invalid point accessLibo Chen
asus->name is null or point to const string,so it is not suitable to kfree it. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10x86: msi-laptop: fix memleakLibo Chen
1. fix two visible mistakes: * when load_scm_model_init faild, we should call platform_device_del(msipf_device) * msipf_attribute_group should be remove in err case 2. change some tags, give them real meaning. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08amilo-rfkill: Add dependency on SERIO_I8042Ben Hutchings
I forgot to add this when changing the driver to use the proper i8042 functions. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08dell-laptop: fix error return code in dell_init()Wei Yongjun
Fix to return -ENOMEM in the alloc_page() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08hp-wmi: Enable hotkeys on some systemsMatthew Garrett
Kyle Evans discovered that he needed to set some bits in an EC register in order to receive hotkey events. Doing so blindly broke some otherwise working HP laptops. It turns out that there's a WMI call that accesses the same register, so let's try calling that instead. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Cc: Kyle Evans <kvans32@gmail.com>
2013-07-07Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "Once you have some time from extended weekend celebrations please consider pulling the following to get: - Various fixes and PCI driver for dw_dmac by Andy - DT binding for imx-dma by Markus & imx-sdma by Shawn - DT fixes for dmaengine by Lars - jz4740 dmac driver by Lars - and various fixes across the drivers" What "extended weekend celebrations"? I'm in the merge window, who has time for extended celebrations.. * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) DMA: shdma: add DT support DMA: shdma: shdma_chan_filter() has to be in shdma-base.h DMA: shdma: (cosmetic) don't re-calculate a pointer dmaengine: at_hdmac: prepare clk before calling enable dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors() dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding ARM: at91: dt: add header to define at_hdmac configuration MIPS: jz4740: Correct clock gate bit for DMA controller MIPS: jz4740: Remove custom DMA API MIPS: jz4740: Register jz4740 DMA device dma: Add a jz4740 dmaengine driver MIPS: jz4740: Acquire and enable DMA controller clock dma: mmp_tdma: disable irq when disabling dma channel dmaengine: PL08x: Avoid collisions with get_signal() macro dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically dma: dw: add PCI part of the driver dma: dw: split driver to library part and platform code dma: move dw_dmac driver to an own directory dw_dmac: don't check resource with devm_ioremap_resource ...
2013-07-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
2013-07-06Merge tag 'metag-for-v3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull Metag architecture changes from James Hogan: - Infrastructure and DT files for TZ1090 SoC (pin control drivers already merged via pinctrl tree). - Panic on boot instead of just warning if cache aliasing possible. - Various SMP/hotplug fixes. - Various other randconfig/sparse fixes. * tag 'metag-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (24 commits) metag: move EXPORT_SYMBOL(csum_partial) to metag_ksyms.c metag: cpu hotplug: route_irq: preserve irq mask metag: kick: add missing irq_enter/exit to kick_handler() metag: smp: don't spin waiting for CPU to start metag: smp: enable irqs after set_cpu_online metag: use clear_tasks_mm_cpumask() metag: tz1090: select and instantiate pinctrl-tz1090-pdc metag: tz1090: select and instantiate pinctrl-tz1090 metag: don't check for cache aliasing on smp cpu boot metag: panic if cache aliasing possible metag: *.dts: include using preprocessor metag: add <dt-bindings/> symlink metag/.gitignore: Extend the *.dtb pattern to match the dtb.S files metag/traps: include setup.h for the per_cpu_trap_init declaration metag/traps: Mark die() as __noreturn to match the declaration. metag/processor.h: Add missing cpuinfo_op declaration. metag/setup: Restrict scope for the capabilities variable metag/mm/cache: Restrict scope for metag_lnkget_probe metag/asm/irq.h: Declare init_IRQ metag/kernel/irq.c: Declare root_domain as static ...
2013-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - Do not idle omap device between crypto operations in one session. - Added sha224/sha384 shims for SSSE3. - More optimisations for camellia-aesni-avx2. - Removed defunct blowfish/twofish AVX2 implementations. - Added unaligned buffer self-tests. - Added PCLMULQDQ optimisation for CRCT10DIF. - Added support for Freescale's DCP co-processor - Misc fixes. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits) crypto: testmgr - test hash implementations with unaligned buffers crypto: testmgr - test AEADs with unaligned buffers crypto: testmgr - test skciphers with unaligned buffers crypto: testmgr - check that entries in alg_test_descs are in correct order Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher" Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher" crypto: camellia-aesni-avx2 - tune assembly code for more performance hwrng: bcm2835 - fix MODULE_LICENSE tag hwrng: nomadik - use clk_prepare_enable() crypto: picoxcell - replace strict_strtoul() with kstrtoul() crypto: dcp - Staticize local symbols crypto: dcp - Use NULL instead of 0 crypto: dcp - Use devm_* APIs crypto: dcp - Remove redundant platform_set_drvdata() hwrng: use platform_{get,set}_drvdata() crypto: omap-aes - Don't idle/start AES device between Encrypt operations crypto: crct10dif - Use PTR_RET crypto: ux500 - Cocci spatch "resource_size.spatch" crypto: sha256_ssse3 - add sha224 support crypto: sha512_ssse3 - add sha384 support ...
2013-07-05Merge tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull ubi fixes from Artem Bityutskiy: "A couple of fixes and clean-ups, allow for assigning user-defined UBI device numbers when attaching MTD devices by using the "mtd=" module parameter" * tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi: UBI: support ubi_num on mtd.ubi command line UBI: fastmap break out of used PEB search UBI: document UBI_IOCVOLUP better in user header UBI: do not abort init when ubi.mtd devices cannot be found UBI: drop redundant "UBI error" string
2013-07-05DMA: shdma: add DT supportGuennadi Liakhovetski
This patch adds Device Tree support to the shdma driver. No special DT properties are used, only standard DMA DT bindings are implemented. Since shdma controllers reside on SoCs, their configuration is SoC-specific and shall be passed to the driver from the SoC platform data, using the auxdata procedure. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: shdma: (cosmetic) don't re-calculate a pointerGuennadi Liakhovetski
Use an existing pointer instead of retrieving it again. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine/trivial: at_hdmac: add curly brackets to if/else expressionsNicolas Ferre
Correct coding style following the patch: 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()Nicolas Ferre
Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer), the function atc_cleanup_descriptors() is not used anymore. We remove it to prevent warnings. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT bindingLudovic Desroches
For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05MIPS: jz4740: Remove custom DMA APILars-Peter Clausen
Now that all users of the custom jz4740 DMA API have been converted to use the dmaengine API instead we can remove the custom API and move all the code talking to the hardware to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: Add a jz4740 dmaengine driverLars-Peter Clausen
This patch adds dmaengine support for the JZ4740 DMA controller. For now the driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the custom JZ4740 DMA API have been converted to the dmaengine API the custom API will be removed and direct hardware access will be added to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: mmp_tdma: disable irq when disabling dma channelQiao Zhou
mask dma irq when disabling dma channel, so that interrupt status will not be set and interrupt won't come again. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: PL08x: Avoid collisions with get_signal() macroMark Brown
As pointed out by Arnd Bergmann there is a get_signal macro definied in linux/signal.h which can conflict with the platform data callback function of the same name leading to confusing errors from the compiler (especially if signal.h manages to get pulled into the driver itself due to header dependencies). Avoid such errors by renaming get_signal and put_signal in the platform data to get_xfer_signal and put_xfer_signal. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagicallyVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: dw: add PCI part of the driverAndy Shevchenko
This is the PCI part of the DesignWare DMAC driver. The controller is usually used in the Intel hardware such as Intel Medfield. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: dw: split driver to library part and platform codeAndy Shevchenko
To simplify the driver development let's split driver to library and platform code parts. It helps us to add PCI driver in future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [Fixed compile error and few checkpatch issues] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: move dw_dmac driver to an own directoryAndy Shevchenko
The dw_dmac driver is going to be split into multiple files. To make this more convenient move it to an own directory. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dw_dmac: don't check resource with devm_ioremap_resourceAndy Shevchenko
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: pl330: use dma_addr_t for describing bus addressesWill Deacon
The microcode bus address (pl330_dmac.mcode_bus) is currently a u32, which fails to compile when building on a system with 64-bit bus addresses. This patch uses dma_addr_t to represent the address instead. Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: pl330: rip out broken, redundant ID probingWill Deacon
The PL330 driver probes the peripheral and primecell IDs of the device to make sure that it is indeed an AMBA PL330. However, it does this by making byte accesses to a device mapping of the word-aligned ID registers, which is either UNPREDICTABLE or generates an alignment fault (depending on the presence of the virtualisation extensions). Rather than fix this code, we can actually rip most of it out and let the AMBA bus driver correctly do the probing for us. Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: imx-sdma: move to generic device tree bindingsShawn Guo
Update imx-sdma driver to adopt generic DMA device tree bindings. It calls of_dma_controller_register() with imx-sdma specific of_dma_xlate to get the generic DMA device tree helper support. The #dma-cells for imx-sdma must be 3, which includes request ID, peripheral type and priority. The existing way of requesting channel, clients directly call dma_request_channel(), still work there, and will be removed after all imx-sdma clients get converted to generic DMA device tree helper. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: sirf: set dma residue based on the current dma transfer positionRongjun Ying
read SIRFSOC_DMA_CH_ADDR register to get current dma transfer position, then update dma residue so that things like ALSA drivers work as ALSA drivers need the right residue value. Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra: avoid channel lock up after freeDmitry Osipenko
Lock scenario: Channel 1 was allocated and prepared as slave_sg, used and freed. Now preparation of cyclic dma on channel 1 will fail with err "DMA configuration conflict" because tdc->isr_handler still setted to handle_once_dma_done. This happens because tegra_dma_abort_all() won't be called on channel freeing if pending list is empty and channel not busy. We need to clear isr_handler on channel freeing to avoid locking. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra20-apbdma: err message correctionDmitry Osipenko
Fixed err msg params order on irq request fail. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dw_dmac: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: timb_dma: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: at_hdmac: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: mxs-dma: Staticize mxs_dma_xlateFabio Estevam
Fix the following sparse warning: drivers/dma/mxs-dma.c:696:17: warning: symbol 'mxs_dma_xlate' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get residual bytes in dma bufferElen Song
Add support for returning the residue for current transfer cookie by reading the transfered buffer size(BTSIZE) in CTRLA register. For a single buffer cookie, the descriptor length minus BTSIZE can get the residue. For a lli cookie, remain_desc will record remain descriptor length when last descriptor finish, the remain_desc minus BTSIZE can get the current residue. If the cookie has completed successfully, the residue will be zero. If the cookie is in progress, it will be the number of bytes yet to be transferred. If get residue error, the cookie will be turn into error status. Check dma fifo to see if data remain, let issue pending finish remain work if there is. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get transfer widthElen Song
In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width, tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: rearrange CFG register bits assignmentNicolas Ferre
No modification in CFG register configuration, just rearrange bits directives to group logically and make it more readable. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: extend hardware handshaking interface identificationNicolas Ferre
Peripheral handshaking identification numbers can be bigger than 15, so new fields have been created in the CFG register. Add macros to take this modification into account and use them in at_dma_xlate() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2026-07-05 04:16:34 +0000