| Age | Commit message (Collapse) | Author |
|---|
|
Update the polling delay to use a 100 ms timeout, as specified
in the RFD77402 datasheet.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a6d6ed694d72b66b0ed7a483d5effa01acd3951)
Cc: stable@vger.kernel.org
|
|
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd86658 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b340ff216fdabfe71ba0cdd47e9835a141d08e10)
Cc: stable@vger.kernel.org
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2918f958d3f677ea93c0ac257cb6ba69b7abb7c)
Cc: stable@vger.kernel.org
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f16866bdb1daed7a80ca79ae2837a9832a74fbc)
Cc: stable@vger.kernel.org
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e80b1d1aa1073230b6c25a1a72e88f37e425ccda)
Cc: stable@vger.kernel.org
|
|
'calibrate' was a one-shot event sent to the sensor to calibrate itself.
It is used on Bosch sensors (BMI160, BMA254).
Light sensors work differently: They are first put in calibration mode,
tests are run to collect information and calculate the calibration
values to apply. Once done, the sensors are put back in normal mode.
Accept boolean true and false (not just true) to enter/exit calibration
state.
Check "echo 0 > calibrate" is supported.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd86658 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES is enabled by default from gfx11+, use AMDGPU_MQD_SIZE_ALIGN
unconditionally for gfx11+.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make allocate_mqd consistent with other callbacks.
Prepare for next patch to use mqd_manager->mqd_size.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use AMDGPU_MQD_SIZE_ALIGN for both kernel and user queue.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of returning feature bit mask of allowed features, initialize
the allowed features in the callback implementation itself.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove commented and redundant logic in get_allowed_feature_mask
implementation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of using bitmap operations, add wrapper interface functions to
operate on smu features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a bitmap struct to represent smu feature bits and functions to set/clear features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES FW uses address(mqd_addr + sizeof(struct mqd) + 3*sizeof(uint32_t))
as fence address and writes a 32 bit fence value to this address. Driver
needs to allocate some extra memory(at least 4 DWs) in addition to
sizeof(struct mqd) as mqd memory(limited to gfx/compute/sdma queue).
For gfx11/12, sizeof(struct mqd) < PAGE_SIZE, KGD allocates mqd memory with
PAGE_SIZE aligned works. For gfx12.1, sizeof(struct mqd) == PAGE_SIZE,
it doesn't work.
KFD mqd manager hardcodes mqd size to PAGE_SIZE/MQD_SIZE across different
IP versions to solve this issue.
To avoid hardcoding in differnet places and across different IP versions.
Let's use AMDGPU_MQD_SIZE_ALIGN instead. It is used in two places.
1. mqd memory alloction
2. mqd stride handling for multi xcc config
v2: Use AMDGPU_GPU_PAGE_ALIGN. (Mukul)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com> (v1)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move pci_dev_put() after pci_dbg() to avoid using pdev after dropping its
reference.
Fixes: 2674f1ef29f46 ("drm/xe/configfs: Block runtime attribute changes")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260121173750.3090907-2-shuicheng.lin@intel.com
(cherry picked from commit 63b33604365bdca43dee41bab809da2230491036)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The history of this driver is pretty amusing. It was marked broken in
2007 in
28f96eeafc89 ("drivers/edac-new-i82443bxgz-mc-driver: mark as broken").
It was then fixed in 2008 in
53a2fe5804e8 ("edac: make i82443bxgx_edac coexist with intel_agp"),
but the dependency on BROKEN was never removed. Given that this was never
fixed in the last ~18 years, it is obvious there is no demand for this driver.
Remove it and move the former maintainer to the CREDITS file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260129082937.48740-1-enelsonmoore@gmail.com
|
|
The return value from itg3200_read_reg_s16() is stored in ret but
never checked. The function unconditionally returns IIO_VAL_INT,
ignoring potential I2C read failures. This causes garbage data to
be returned to userspace when the read fails, with no error reported.
Add proper error checking to propagate the failure to callers.
Fixes: 9dbf091da080 ("iio: gyro: Add itg3200")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove unused last_timestamp field from sca3000_state
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove unused int2_bitmask field from adxl372_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad7766_irq() is identical to iio_trigger_generic_data_rdy_poll().
Use iio_trigger_generic_data_rdy_poll() instead of ad7766_irq().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The force-threading functionality is required on PREEMPT_RT because the
handler is using locks with can sleep on PREEMPT_RT.
Remove IRQF_ONESHOT from irqflags.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The intention here was probably not allowing forced-threading for
handlers such as iio_trigger_generic_data_rdy_poll() will intends to
invoke hard-interrupt handlers.
Replace IRQF_ONESHOT with IRQF_NO_THREAD.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke
other interrupt handler and this supposed to happen from within the
hardirq.
Use IRQF_NO_THREAD to forbid forced-threading.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control updates for 6.20/7.0 from Daniel Lezcano:
"- Fix CFLAGS and LDFLAGS in the pkg-config template fir the libthermal
(Romain Gantois)
- Support multiple temp to raw conversion functions for the Mediatek
LVTS thermal driver and add the MT8196 and MT6991 support (Laura
Nao)
- Add support for the Mediatek LVTS driver for MT7987 (Frank
Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro in BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas Soc
where it is not available. Add the RZ/T2H and RZ/N2H suppport
(Cosmin Tanislav)"
* tag 'thermal-v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
thermal/drivers/mediatek/lvts: Make number of calibration offsets configurable
dt-bindings: thermal: mediatek: Add LVTS thermal controller support for MT8196
tools: lib: thermal: Correct CFLAGS and LDFLAGS in pkg-config template
|
|
Add comprehensive documentation for ublk's split reference counting
model (io->ref + io->task_registered_buffers) above ublk_init_req_ref()
given this model isn't very straightforward.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The file sys/kernel/debug/tpmi-<n>/plr/domain<n>/status has store and show
callbacks. Make it writeable.
Fixes: 811f67c51636d ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260127-plr-debugfs-write-v1-1-1fffbc370b1e@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Avoid registering kobjects with empty names when a BIOS attribute
name decodes to an empty string.
Fixes: a34fc329b1895 ("platform/x86: hp-bioscfg: bioscfg")
Reported-by: Alain Cousinie <alain.cousinie@laposte.net>
Closes: https://lore.kernel.org/platform-driver-x86/22ed5f78-c8bf-4ab4-8c38-420cc0201e7e@laposte.net/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260128190501.2170068-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
* for-next/perf:
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
perf/arm_dsu: Allow standard cycles events
perf/arm_dsu: Support DSU-120
perf/arm_dsu: Support DSU-110
drivers: perf: use bitmap_empty() where appropriate
perf/arm-cmn: Support CMN-600AE
|
|
* for-next/cpufreq:
arm64: topology: Do not warn on missing AMU in cpuhp_topology_online()
arm64: topology: Handle AMU FIE setup on CPU hotplug
cpufreq: Add new helper function returning cpufreq policy
arm64: topology: Skip already covered CPUs when setting freq source
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260127210541.4068379-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
Two fixes for the default-settings code for the General-Register-Files,
which sets system defaults for some settings like disabling the automatic
jtag/sdmmc switching.
One is a corrected register-offset and the other makes the code actually
look for all matched GRF instances, which it didn't do before.
* tag 'v6.20-rockchip-drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Support multiple grf to be handled
soc: rockchip: grf: Fix wrong RK3576_IOCGRF_MISC_CON definition
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/drivers
mvebu arm for 6.20 (part 1)
Simplify Dove PMU OF child node iteration with scoped loops
* tag 'mvebu-arm-6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
soc: dove: pmu: Simplify with scoped for each OF child loop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.20
* Add a compatible to the reset-gpio driver, suppress the sysfs bind
attributes, and propagate GPIO API errors.
* Add support for the i.MX8ULP SIM LPAV reset controller.
* Add RZ/G3S USBPHY suspend/resume support.
* Enable reset-k230 by default on ARCH_CANAAN
* Add support for the SpacemiT K3 SoC reset controller.
* Merge the 'spacemit-clkrst-v6.20-3' tag, shared with the clk tree,
as a dependency for the SpacemiT changes.
* tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux:
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
reset: gpio: suppress bind attributes in sysfs
clk: spacemit: k3: extract common header
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
reset: gpio: add the "compatible" property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.20
1. Mediatek SMI: Fix old struct device reference leaks during error
paths and device unbinding.
2. Memory Devicetree bindings: refactor existing LPDDR bindings and add
bindings for DDR4 SDRAM. These will be used for example in
stm32mp257f-ev1 DTS.
* tag 'memory-controller-drv-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: SDRAM channel: standardise node name
dt-bindings: memory: add DDR4 channel compatible
dt-bindings: memory: factorise LPDDR channel binding into SDRAM channel
dt-bindings: memory: introduce DDR4
dt-bindings: memory: factorise LPDDR props into SDRAM props
memory: mtk-smi: clean up device link creation
memory: mtk-smi: fix device leak on larb probe
memory: mtk-smi: fix device leaks on common probe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic Drivers for v6.20:
- add new SoC id for S905Y4
* tag 'amlogic-drivers-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoC id for S905Y4
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers
drivers: bus & hwsplinlock updates for OMAP
* tag 'omap-for-v6.20/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
hwspinlock: omap: Handle devm_pm_runtime_enable() errors
bus: omap-ocp2scp: enable compile testing
bus: omap-ocp2scp: fix OF populate on driver rebind
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates
This adds:
- A socinfo entry for the MT8371 Genio 520 SoC
- Support for the Dynamic Voltage and Frequency Scaling
Resource Controller (DVFSRC) version 4, found in the
new MediaTek Kompanio Ultra (MT8196) SoC
- Initial support for the CMDQ mailbox found in the MT8196.
- A memory leak fix in the MediaTek SVS driver's debug ops.
* tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations
soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock
soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196
soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present
soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw
soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type
soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd
dt-bindings: soc: mediatek: dvfsrc: Document clock
soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers
Apple SoC driver updates for 6.20
- Add a poweroff function to the RTKit library which will be required
for the first USB4/Thunderbolt series I hope to submit next cycle.
* tag 'apple-soc-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
soc: apple: rtkit: Add function to poweroff
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fix for v6.19
The changes to the logic in the Qualcomm SMEM driver for separating
"failed to probe" from "not yet probed", did not change the
qcom_smem_is_available() function, with the result that clients sees
SMEM as always available. Clients might then proceed to interact with
SMEM in codepaths that aren't suited to cope with -EPROBE_DEFER.
* tag 'qcom-drivers-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smem: fix qcom_smem_is_available and check if __smem is valid
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra264.
Use the "wakeup-parent" phandle from the GPIO device tree node to
ensure the GPIO driver associates with the intended PMC device.
Relying only on compatible-based lookup can select an unexpected
PMC node, so fall back to compatible-based lookup when the phandle
is not present.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260128085114.1137725-2-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Commit a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay
window size") introduced logic to setup the ESN replay window size.
This logic is only valid for packet offload.
However, the check to skip this block only covered outbound offloads.
It was not skipped for crypto offload, causing it to fall through to
the new switch statement and trigger its WARN_ON default case (for
instance, if a window larger than 256 bits was configured).
Fix this by amending the condition to also skip the replay window
setup if the offload type is not XFRM_DEV_OFFLOAD_PACKET.
Fixes: a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay window size")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HCA CAP structure is allocated in mlx5_hca_caps_alloc().
mlx5_mdev_init()
mlx5_hca_caps_alloc()
And HCA CAP is read from the device in mlx5_init_one().
The vhca_id's debugfs file is published even before above two
operations are done.
Due to this when user reads the vhca id before the initialization,
following call trace is observed.
Fix this by deferring debugfs publication until the HCA CAP is
allocated and read from the device.
BUG: kernel NULL pointer dereference, address: 0000000000000004
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 23 UID: 0 PID: 6605 Comm: cat Kdump: loaded Not tainted 6.18.0-rc7-sf+ #110 PREEMPT(full)
Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016
RIP: 0010:vhca_id_show+0x17/0x30 [mlx5_core]
Code: cb 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 70 48 c7 c6 45 f0 12 c1 48 8b 80 70 03 00 00 <8b> 50 04 0f ca 0f b7 d2 e8 8c 82 47 cb 31 c0 c3 cc cc cc cc 0f 1f
RSP: 0018:ffffd37f4f337d40 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8f18445c9b40 RCX: 0000000000000001
RDX: ffff8f1109825180 RSI: ffffffffc112f045 RDI: ffff8f18445c9b40
RBP: 0000000000000000 R08: 0000645eac0d2928 R09: 0000000000000006
R10: ffffd37f4f337d48 R11: 0000000000000000 R12: ffffd37f4f337dd8
R13: ffffd37f4f337db0 R14: ffff8f18445c9b68 R15: 0000000000000001
FS: 00007f3eea099580(0000) GS:ffff8f2090f1f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000004 CR3: 00000008b64e4006 CR4: 00000000003726f0
Call Trace:
<TASK>
seq_read_iter+0x11f/0x4f0
? _raw_spin_unlock+0x15/0x30
? do_anonymous_page+0x104/0x810
seq_read+0xf6/0x120
? srso_alias_untrain_ret+0x1/0x10
full_proxy_read+0x5c/0x90
vfs_read+0xad/0x320
? handle_mm_fault+0x1ab/0x290
ksys_read+0x52/0xd0
do_syscall_64+0x61/0x11e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: dd3dd7263cde ("net/mlx5: Expose vhca_id to debugfs")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The capability check for reset_root_to_default was inverted, causing
the function to return -EOPNOTSUPP when the capability IS supported,
rather than when it is NOT supported.
Fix the capability check condition.
Fixes: 3c9c34c32bc6 ("net/mlx5: fs, Command to control TX flow table root")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
