| Age | Commit message (Collapse) | Author |
|
regcache_sync() and regcache_sync_region() both open-code the same
pattern: check cache_dirty, then dispatch to either cache_ops->sync()
or regcache_default_sync().
Extract this into a static __regcache_sync() helper that both callers
share. The helper checks cache_dirty and returns 0 early when the
cache is clean, dispatches to the backend sync callback when present,
and falls back to regcache_default_sync() otherwise.
In regcache_sync_region(), the cache_dirty early-exit previously
skipped setting map->async. With the helper, map->async is set to
true before the call and restored to false unconditionally afterward,
so when cache_dirty is false the flag is toggled and immediately
restored - functionally equivalent.
No functional change.
Assisted-by: LLM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20261002-regmap-lock-2nd-v2-2-e172b0501c52@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The previous patch ("regcache: use the regmap scoped lock guard")
deliberately left regcache_init() with explicit map->lock()/unlock()
calls because the function has a goto err_* cleanup ladder and mixing
goto with cleanup helpers in the same function is discouraged by
cleanup.h.
Solve this by extracting two static helpers:
regcache_locked_op() - acquires the regmap lock via guard(regmap),
invokes an int-returning cache_ops callback
(init, populate), and returns its result.
Returns 0 when the callback is NULL.
regcache_locked_exit() - acquires the regmap lock via guard(regmap)
and invokes the void-returning exit
callback. Returns immediately when the
callback is NULL.
Because the lock scope is now entirely inside the helper functions,
it never crosses a goto target in the caller, so the cleanup.h
concern does not apply.
Convert all four remaining open-coded lock/unlock sites in
regcache_init() (init, populate, error-path exit) and the
scoped_guard in regcache_exit() to use these helpers.
No functional change.
Assisted-by: LLM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20261002-regmap-lock-2nd-v2-1-e172b0501c52@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST
triggers a hard reset of the chip and writing CLIRQ clears the interrupt;
reading them returns nothing useful, and the read itself fires the command.
The result is that a plain register dump resets the board:
cat /sys/kernel/debug/regmap/2-003c/registers
walks every readable register, hits HRST, and the board reboots.
Split the callback back in two so HRST and CLIRQ stay writable but are no
longer readable. The readable range is left unchanged
(LTC3676_BUCK1 ... LTC3676_IRQSTAT).
Fixes: 37b918a034fe ("regulator: Add LTC3676 support")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Ojha <Abhishek.ojha@savoirfairelinux.com>
Link: https://patch.msgid.link/20260902010701.3360310-1-Abhishek.ojha@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In mpam_save_mbwu_state() the monitor values are read using __ris_msmon_read_locked()
which checks if the configuration provided matches that in the hardware and if
not then resets the monitor. To avoid resetting the monitor before reading the
value that needs saving only clear the configuration after the monitor is read.
Fixes: d056d29aefbe ("arm_mpam: Use __ris_msmon_read() for saving MBWU state")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
power-of-two check
The mailbox ring buffer geometry comes from AMD signed firmware, through
the management or mailbox information block, or through the CREATE_CONTEXT
response, and the driver trusts it by design.
The power-of-two test on rb_size was a firmware debugging aid. Nothing in
the driver derives a mask, a shift or a modulo from rb_size, so no code
depends on the property it tested. The ring index wrap is handled by the
explicit comparisons in mailbox_send_msg() and mailbox_get_msg().
Replace the test with a comment that records the design, so that
automated review does not flag the absence of a bound here again.
Suggested-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/all/67698952-6394-44a8-01fe-3e3558b7cb4c@amd.com/
Signed-off-by: Eva Crystal <0xiviel@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20261002205814.178031-1-0xiviel@gmail.com
|
|
Replace the per-message kzalloc() with a pre-allocated pool of N slots.
Each slot is rb_size bytes which is the combined size of the mailbox_msg
metadata and the package payload must not exceed rb_size. No dynamic
allocation is needed in the send hot path.
msg_id encodes the slot index as (slot | MAGIC_VAL), allowing O(1)
lookup on response. A bool busy field tracks slot occupancy; it is set
after the memset() that initialises the slot so the flag is not zeroed
out, and cleared in mailbox_msg_done() before invoking the callback so
the slot is available for reuse by the time the callback returns.
mailbox_msg_done() is introduced as a helper that saves the callback
pointer, clears busy via smp_store_release(), then invokes the callback.
The release barrier ensures the loads of notify_cb and handle complete
before busy is cleared. Without it, a concurrent sender could overwrite
those fields after observing busy == false. mailbox_acquire_msgid() uses
smp_load_acquire() on busy to pair with the release store. Callers hold
a per-channel mutex, so only one sender runs at a time and no atomic
slot claim is needed.
NULL notify_cb is handled inside mailbox_msg_done() so fire-and-forget
sends (e.g. aie2_config_cu with no callback) are correctly tracked as
in-flight until the response arrives.
The management channel slot count and async event pool size both use a
static AMDXDNA_MAX_ASYNC_EVENT_BUFS of 4. The channel must be
initialised before total_col is known from firmware, so the value
cannot be derived from ndev. Both counts must stay equal. The channel
is sized AMDXDNA_MAX_ASYNC_EVENT_BUFS + 1 (one extra for other
management commands), so the pool cannot exceed that.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20261002161122.1350075-1-max.zhen@amd.com
|
|
Jonas Rebmann <jre@pengutronix.de> says:
This is a series of patches for the spi-sun4i driver, some of which have
been sitting around for a while.
1-4 are fixes and 5 is a small patch that introduces reporting of the
effective SPI speed.
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-0-9fe919d5cecf@pengutronix.de
|
|
of transfer
Report the effectively used speed_hz for the transfer by setting
tfr->effective_speed_hz.
For more information see commit 5d7e2b5ed585 ("spi: core: allow
reporting the effectivly used speed_hz for a transfer"), which adds this
feature to the SPI core.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-6-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bail out if clk_get_rate() or clk_set_rate() fail during
sun4i_spi_transfer_one(). This might happen if the clock isn't known yet
or fails to set the requested rate.
This also ensures that mclk_rate is nonzero and can be safely divided by
in a future commit.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-5-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
completion and RX FIFO interrupt
In commit 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO
size"), support for transfers larger than the FIFO size was added.
This commit moves the draining of the RX-FIFO from
sun4i_spi_transfer_one() (after completion of the transfer) to the IRQ
handler when the IRQ "transfer complete" is handled. In addition, the
IRQ "RX-FIFO 3/4 full" is activated for all transfers.
However, this does not take into account that the RX-IRQ for transfers
that exceed 3/4 of the FIFO size is still pending after the IRQ
"transfer complete" has been processed. All interrupt sources are only
deactivated after the wait_for_completion_timeout() in
sun4i_spi_transfer_one().
This opens a race window for "RX-FIFO 3/4 full" interrupts to come.
The sequence is as follows:
| sun4i_spi_transfer_one()
| sun4i_spi_fill_fifo() // fill TX-FIFO with 48 bytes
| // enable RX-FIFO 3/4 full IRQ
| wait_for_completion_timeout();
|
| // SPI controller transfers 48 bytes
| // SPI controller issues "transfer complete" and "RX-FIFO 3/4 full" IRQ
|
| // IRQ handler start
| sun4i_spi_handler()
| // ACK "transfer complete" IRQ
| sun4i_spi_drain_fifo();
| complete(); ----.
| return IRQ_HANDLED; \
| // IRQ handler end \__ race
| / window
| // wait_for_completion_timeout() continues /
| // disable all IRQ sources ----'
Avoid the race condition by disabling all interrupts when handling the
"transfer complete" IRQ and before calling complete(). Also move the
draining of the RX-FIFO back into sun4i_spi_transfer_one() where it
was before commit 196737912da5 ("spi: sun4i: Allow transfers larger than
FIFO size").
This has the added benefit of spending a little less time in the IRQ
handler.
With all interrupts disabled once the transfer completed, omit the
clearing of the Transfer Complete bit in sun4i_spi_handler. This is safe
because sun4i_spi_transfer_one() takes care of this before enabling any
interrupts again.
Cc: Tobias Schramm <t.schramm@manjaro.org>
Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-4-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A SPI transfer defines the _maximum_ speed of the SPI transfer. However
the driver doesn't take into account that the clock divider is always
rounded down (due to integer arithmetic). This results in a too high
clock rate for the SPI transfer.
E.g.: with an mclk_rate of 24 MHz and an SPI transfer speed of 10 MHz,
the original code calculates a reg of "0", which results in an effective
divider of "2" and a 12 MHz clock for the SPI transfer.
Use DIV_ROUND_UP() instead of a plain integer division to fix the
problem.
While there simplify the divider calculation for the CDR1 case, use
order_base_2() instead of two ilog2() calculations.
Fixes: b5f6517948cc ("spi: sunxi: Add Allwinner A10 SPI controller driver")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-3-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
workaround
In commit 6d9fe44bd73d ("spi: sun4i: fix FIFO limit"), the TX FIFO is
filled max to SUN4I_FIFO_DEPTH - 1 (= 63) bytes to work around
timeouts observed on A10s SoCs.
Commit 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO
size") added support for transfers larger than the FIFO size. This
commit did not consider the A10 workaround (limit the TX FIFO fill
size to SUN4I_FIFO_DEPTH - 1 (= 63) bytes) for refilling the TX FIFO
in the IRQ handler.
To apply the workaround independent from where sun4i_spi_fill_fifo()
is called, remove the length argument from the function and directly
take the max fill level of SUN4I_FIFO_DEPTH - 1 into account when
calculating the free space in the FIFO.
Due to the lack of HW this patch has not been tested on an A10 SoC,
but on an A20 SoC. It was not possible to reproduce the timeout on the
A20.
Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-2-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In commit 6d9fe44bd73d ("spi: sun4i: fix FIFO limit"), the TX-FIFO is
filled max to SUN4I_FIFO_DEPTH - 1 (= 63) bytes to work around timeouts
observed on A10s SoCs.
Commit 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO
size") added support for transfers larger than the FIFO size. But this
commit only enabled the TX-FIFO empty interrupt for transfers larger
than the FIFO (= 64) bytes.
This breaks transfers with exactly 64 bytes: the TX-FIFO is only filled
with 63 bytes but the interrupt to refill the FIFO is not triggered. The
problem can be reproduced with the following command:
| spidev_test -D /dev/spidev0.1 -S 64 -s 20000000 -I 1
|
| [ 7797.548745] spi_master spi0: spi0.1: timeout transferring 64 bytes@20000000Hz for 110(100)ms
| [ 7797.557237] spidev spi0.1: SPI transfer failed: -110
| [ 7797.562308] spi_master spi0: failed to transfer one message from queue
| [ 7797.568936] spi_master spi0: noqueue transfer failed
To fix the problem enable the TX-FIFO interrupt if the total TX length
is larger than SUN4I_FIFO_DEPTH - 1 (= 63) bytes.
Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260914-spi-sun4i-fixes-v3-1-9fe919d5cecf@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The fixed divider ignores device and operation clock limits. Calculate
the divider before each transfer so SCK does not exceed either limit.
Advertise the controller maximum speed so the SPI core supplies a default
when the device omits its maximum speed. Use the fastest divider when no
speed limit is supplied.
Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20261001-fix-sg204xspi-v2-2-014dbaf22b5e@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The transfer helpers return errors, but both dispatchers discard them.
Return these errors to the SPI memory layer instead of reporting success.
Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20261001-fix-sg204xspi-v2-1-014dbaf22b5e@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Set CHECK CONDITION for failed ATAPI commands.
Since commit 2e1d2e65e773 ("ata: libata-scsi: terminate deferred
commands on time out") failed ATAPI commands incorrectly stopped
having CHECK CONDITION set for commands that had a SCSI midlayer
byte set by scsi_check_sense(). SG_IO users therefore saw failed
ATAPI commands as successful (Hengyu)
* tag 'ata-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: do not lose CHECK CONDITION for failed ATAPI commands
|
|
vc4 uses of_dma_configure() during bind to set the DMA configuration of
the drm device by borrowing the configuration of one of its component
devices.
This violates driver model expectations that IOMMU probing and domain
attachment occur before driver binding - see commit bcb81ac6ae3c ("iommu:
Get DT/ACPI parsing into the proper probe path").
With the introduction of the bcm2712-iommu driver behind the vc4 hvs
device, a warning is triggered:
vc4-drm gpu: late IOMMU probe at driver bind, something fishy here!
Instead of configuring the virtual aggregate device, adopt the pattern
used by sun4i/sun8i/exynos where candidate DMA-capable hardware components
register themselves as the device to use for DRM allocations via
drm_dev_set_dma_dev(), provided a DMA device has not already been
assigned.
HVS will typically bind first and claim the DMA device. The gen6 36-bit
DMA mask configuration was moved into vc4_hvs_bind() accordingly. For
older generations, vc4's v3d component continues to be available as a
fallback, and the default platform bus 32-bit DMA mask is retained.
Fixes: da8e393e23ef ("drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component")
Signed-off-by: Daniel Drake <dan@reactivated.net>
Link: https://patch.msgid.link/20261004-drm-dma-device-2-v3-1-45b121ab819f@reactivated.net
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
ath12k_core_panic_handler() is invoked via atomic_notifier_call_chain(),
which runs inside an RCU read-side critical section. The current code calls
ath12k_pci_sw_reset() synchronously from this context, which eventually
reaches mhi_device_get_sync() and schedule_timeout(), triggering a voluntary
context switch within RCU.
Call trace:
rcu_note_context_switch+0x4c4/0x508 (P)
__schedule+0xbc/0x1204
schedule+0x34/0x110
schedule_timeout+0x84/0x11c
__mhi_device_get_sync+0x164/0x228 [mhi]
mhi_device_get_sync+0x1c/0x3c [mhi]
ath12k_wifi7_pci_bus_wake_up+0x20/0x2c [ath12k_wifi7]
ath12k_pci_read32+0x58/0x350 [ath12k]
ath12k_pci_clear_dbg_registers+0x28/0xb8 [ath12k]
ath12k_pci_panic_handler+0x20/0x44 [ath12k] ath12k_core_panic_handler+0x28/0x3c [ath12k]
notifier_call_chain+0x78/0x1c0
atomic_notifier_call_chain+0x3c/0x5c
Revert change "wifi: ath12k: add panic handler" to avoid this issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Tested-by: Joonhoe Kim <26rote@gmail.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Fixes: 809055628bce ("wifi: ath12k: add panic handler")
Link: https://patch.msgid.link/20260612032332.2278338-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The ASUE140D touchpad on the ASUS Zenbook UX3404VC (BIOS UX3404VC.303)
starts lagging shortly after boot when the bus runs at the 400 kHz the
DSDT asks for, and only recovers after rebinding i2c-hid. Forcing
100 kHz fixes it.
Signed-off-by: Harinn <prinn.dev@pm.me>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20261004-i2c-acpi-asue140d-100khz-v1-1-cc2dbad00470@pm.me
|
|
The RCU guard is declared in the body of the per-TID loop, so it is still
held across the teardown pass. nxpwifi_del_rx_reorder_entry() flushes the
Rx workqueue and deletes the reorder timer synchronously, both of which
sleep, so a station deauthenticating from the AP splats under
CONFIG_DEBUG_ATOMIC_SLEEP.
Scope the guard to the collection walk. The teardown does not need RCU: it
serialises on priv->rx_reorder_tbl_lock[] and frees with kfree_rcu().
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Assisted-by: Claude:claude-opus-5
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_is_tx_ba_stream_ptr_valid() returns true when the entry is still
linked, and every caller passes an entry that is on the list, so the early
return always fires and nothing is ever unlinked or freed. Entries leak on
every teardown and, since nxpwifi_space_avail_for_new_ba_stream() counts
them, Tx aggregation stops being negotiated once the stale count reaches
the maximum.
Changing the original dead && test to || to silence a NULL dereference
report inverted the validity test along with it.
Fixes: 00c786a7581e ("wifi: nxpwifi: fix multiple static analysis errors and warnings")
Assisted-by: Claude:claude-opus-5
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_cfg80211_authenticate() allocates the buffer it builds the
management frame in and never checks the result:
mgmt = kzalloc(frame_len, GFP_KERNEL);
skb = dev_alloc_skb(...);
if (!skb) {
...
return -ENOMEM;
}
...
memcpy(mgmt->da, req->bss->bssid, ETH_ALEN);
On allocation failure the memcpy() a dozen lines later dereferences NULL.
The same sequence leaks mgmt when dev_alloc_skb() fails: that path
returns without freeing it, while the success path drops it after
nxpwifi_form_mgmt_frame().
Bail out when the allocation fails, and free it before returning on the
skb error path.
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_cfg80211_authenticate() builds a 3-address management frame in a
temporary buffer and hands it to nxpwifi_form_mgmt_frame(), which copies
it into the skb and splices in address4. The frame length is tracked in
a single u16 that conflates the two lengths, and it gets both wrong.
Truncation. req->ie_len and req->auth_data_len are both size_t. The IE
policy caps req->ie_len at IEEE80211_MAX_DATA_LEN, but
NL80211_ATTR_AUTH_DATA only has a four-byte minimum length policy. Since
nla_len is a u16, a single authentication data attribute can carry up to
65531 bytes, enough for the combined frame length to exceed U16_MAX
before it is assigned to pkt_len. With auth_data_len == 65510 and no IEs
the length wraps to 6, kzalloc(6) succeeds, and the memcpy() below then
writes 65506 user-provided bytes past a 6-byte heap object.
Geometry. NXPWIFI_MGMT_HEADER_LEN is 30, which is the 24-byte 3-address
header plus the address4 that the firmware expects. The temporary buffer
only holds a struct ieee80211_hdr_3addr, so six of the bytes accounted
for are never used, and passing that length to nxpwifi_form_mgmt_frame()
makes it append ETH_ALEN on top of a length that already included it.
The skb is sized without those six bytes, so the last skb_put_data()
overruns the tailroom by exactly ETH_ALEN. It usually goes unnoticed
because SKB_DATA_ALIGN() rounding leaves slack. The driver's other
caller of the helper, nxpwifi_cfg80211_mgmt_tx(), adds ETH_ALEN to the
skb size before allocating and passes the 3-address length, which is what
this path should do too.
Keep the two lengths apart. frame_len is the 3-address frame the driver
builds: it sizes the temporary buffer and is what the helper is told.
pkt_len is what the firmware sees, frame_len plus address4: it sizes the
skb and goes into tx_info. Computing frame_len in size_t and rejecting
anything that cannot be represented once ETH_ALEN is added removes the
wrap.
The value handed to the firmware is unchanged, so this is not a
behavioural change for frames that were already valid. A tighter 802.11
bound may make sense, but that depends on the firmware's frame format and
is a separate decision.
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
adapter->chan_stats comes from vmalloc(), which does not clear the
memory, and nxpwifi_cfg80211_dump_survey() reads it as soon as user
space asks for survey data. For the entries no scan has filled in, a
non-zero cca_scan_dur passes the validity check and stale bytes are
reported to user space as noise, time and time_busy.
Use kcalloc() instead. The array holds two entries per supported
channel, small enough not to need vmalloc(), and the two callers change
to kfree() accordingly.
mwifiex fixed the same issue in commit 0e20450829ca ("wifi: mwifiex:
Initialize the chan_stats array to zero").
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_11n_aggregate_pkt() drops ra_list_spinlock while it copies each
subframe, so it rechecks the RA list after taking the lock again. The
check inside the aggregation loop returns without releasing the
skb_aggr it has been filling, leaking one tx_buf_size buffer along with
the subframes already aggregated into it.
Release skb_aggr there, the way the same check on the -EBUSY path
already does.
mwifiex fixed the same issue in commit 990a73dec3fd ("wifi: mwifiex: Fix
memory leak in mwifiex_11n_aggregate_pkt()").
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_adapter_cleanup() stops adapter->wakeup_timer with
timer_delete(), which does not wait for a running callback. The
callback goes on using the adapter: wakeup_timer_fn() sets
adapter->hw_status, walks the command queues through
nxpwifi_cancel_all_pending_cmd() and calls adapter->if_ops.card_reset().
Both paths that reach nxpwifi_adapter_cleanup() free the adapter right
afterwards, through nxpwifi_free_adapter() in nxpwifi_remove_card() and
in the nxpwifi_add_card() error unwind.
Use timer_delete_sync() so the callback has finished before the adapter
is released.
mwifiex fixed the same issue in commit ae5e95d41574 ("wifi: mwifiex: fix
use-after-free in mwifiex_adapter_cleanup()").
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
When a station leaves, the firmware reports EVENT_UAP_STA_DEAUTH.
nxpwifi_uap_event_sta_deauth() tears down the reorder, BA and WMM state
for that peer but leaves its nxpwifi_sta_node on priv->sta_list.
Nothing else removes it. cfg80211_del_sta() only reports the departure
upwards, it does not call back into cfg80211_ops.del_station, and that
callback is the only caller of nxpwifi_del_sta_entry(). The entry
therefore survives until the BSS goes idle and
nxpwifi_del_all_sta_list() drops everything.
Until then the departed station still looks associated to the driver.
nxpwifi_handle_uap_rx_forward() finds the stale node for that address,
treats the frame as intra-BSS traffic and requeues it for transmission
instead of passing it up the stack, so traffic for that address is
misrouted. The list also keeps one entry per station that has ever
associated, and a station that comes back reuses the stale node along
with its old statistics.
mwifiex, which nxpwifi was derived from, deletes the entry in the same
event handler.
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Tested-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
nxpwifi_del_sta_entry() unlinks an entry from priv->sta_list without
holding priv->sta_list_spinlock. The comment above it gives the
reason: the function is only reached from cfg80211_ops.del_station,
which runs under the wiphy mutex.
That mutex serialises this callback against other users of the same
lock, including wiphy_work items. It covers neither of the two other
writers of the same list:
nxpwifi_add_sta_entry() from nxpwifi_uap_event_sta_assoc()
nxpwifi_del_all_sta_list() from nxpwifi_uap_event_bss_idle()
Both run from nxpwifi_process_event() on the driver's main work queue,
a plain workqueue that never takes the wiphy lock, and both take
sta_list_spinlock around their update. A station associating, or the
BSS going idle, can therefore modify priv->sta_list while a hostapd
del_station is walking it and unlinking an entry.
Take the lock here too. As the traversal then runs under the write
lock, list_for_each_entry() replaces the _rcu variant, matching
nxpwifi_del_all_sta_list().
The same call path reaches nxpwifi_get_sta_entry() without
rcu_read_lock(). Entries are freed with kfree_rcu() and every other
caller holds it, so take it around the lookup as well.
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Tested-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
The mailbox header was defined as __le32, which required
cpu_to_le32() and le32_to_cpu() conversions whenever it was
write or read.
These conversions are unnecessary because the header is always
handled as a 32-bit value, not as raw bytes. It is written with
xe_mmio_write32() and read with xe_mmio_read32(), which already
handle any required byte-order conversion through the underlying
writel()/readl() accessors.
As a result, the header value is already in CPU byte order when
used by the driver. Keeping the extra conversions had no effect
on little-endian systems and could cause an incorrect on
big-endian systems.
So use u32 for the mailbox header and remove the unnecessary
endianness conversions.
Fixes: 1f95f618182b ("drm/xe/xe_sysctrl: Add System Controller mailbox communication support")
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Tested-by: Anoop Vijay <anoop.c.vijay@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260924060900.146167-18-mallesh.koujalagi@intel.com
(cherry picked from commit 5137b391599579371c32f555958d3cf55e19bd88)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There is a small race window between intel_rps_boost() reading
a stale ACTIVE state and queuing rps->work, where ACTIVE may be
changed via asynchronous calls triggered by wakeref drop.
This means that rps_work() could be triggered after the GT has
been parked, so unmasking RPS PM interrupts would happen without
holding PM wakelock. This sequence of events may be observed
during live_rc6_ctx_wa() selftest:
1) live_rc6_ctx_wa()
-> intel_engine_pm_put()
-> wakeref_put()
ASYNC1) wakeref_put() callback
-> __engine_park()
-> intel_gt_pm_put_async()
-> intel_gt_pm_put_async_untracked()
-> intel_wakeref_put_async()
ASYNC2) wakeref_put_async() callback
-> __gt_park()
-> intel_rps_park()
-> intel_rps_clear_active() [clear ACTIVE]
WITH INTERRUPTS:
-> rps_disable_interrupts()
-> cancel_work_sync(rps->work)
-> rps_reset_interrupts() [rps->pm_iir = 0]
WITHOUT INTERRUPTS (TIMER mode):
-> rps_stop_timer()
-> cancel_work_sync(rps->work)
2) live_rc6_ctx_wa()
-> intel_gt_wait_for_idle()
-> intel_gt_retire_requests_timeout()
-> dma_fence_wait_timeout()
-> ops->wait() [i915_fence_wait()]
-> i915_request_wait_timeout()
-> intel_rps_boost()
-> intel_rps_is_active() [check ACTIVE]
[OPEN RACE WINDOW]
-> queue_work(rps->work)
-> retire_requests()
-> i915_request_retire()
-> intel_rps_dec_waiters() [from 1 to 0]
If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW],
then:
3) rps_work() executes from the workqueue and may satisfy
"(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir
is zeroed by an earlier rps_work() call or never gets a new
value after previous intel_rps_unpark() event), so it jumps
to "out" label, bypassing intel_rps_is_active() guard and
executes gen6_gt_pm_unmask_irq();
4) GT is parked and runtime PM wakelock is dropped, so only
a raw reference in __gt_park() ->
intel_display_power_put_async() remains for 100ms, then the
MMIO write in gen6_gt_pm_unmask_irq() detects missing
wakelock via assert_rpm_wakelock_held() and emits
"RPM wakelock ref not held during HW access" tainting kernel.
Commit 3e7abf814193 ("drm/i915: Extract GT render power state management")
dropped the "if (rps->interrupts_enabled)" guard that
gen6_pm_rps_work() had around this unmask in i915_irq.c.
INTEL_RPS_ACTIVE brackets the same window, since it is set in
intel_rps_unpark() before rps_enable_interrupts() and
rps_start_timer() and cleared in intel_rps_park() before
rps_stop_timer() and rps_disable_interrupts().
Skip unmasking when RPS is no longer active (reaching unmask
operation is independent of INTERRUPT mode). This does not
prevent RPS operation from resuming on the next unpark.
In interrupt mode, intel_rps_unpark() calls
rps_enable_interrupts(), which enables and unmasks the PM
interrupts. In timer mode, it calls rps_start_timer(),
restarting periodic engine-busyness evaluation. The timer
generates software RPS events and queues rps_work() directly,
independently of PM interrupt delivery. Neither mode requires
the late worker to unmask interrupts while the GT is parked
Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16562
Cc: stable@vger.kernel.org # v5.5+
Assisted-by: GitHub-Copilot:claude-opus-5
Assisted-by: GitHub-Copilot:gpt-6-astra
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20260910081329.3300417-1-krzysztof.karas@intel.com
(cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
Fixes: 8e4ba491b0ba ("drm/i915: Parse command buffer earlier in eb_relocate(slow)")
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Assisted-by: GitHub-Copilot:gpt-6-astra
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20260911061145.3535489-1-krzysztof.karas@intel.com
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If the 'for_each_new_connector_in_state()' loop finishes without
hitting the break, connector_state is left pointing at the last
connector visited, which has no CRTC, instead of
staying NULL.
That skips the "if (!connector_state)" fallback below the loop, which
looks up the active connector when the state contains none. The
function then carries on with a connector that is not driven.
Fix by resetting connector_state to NULL for each connector visited that
has no CRTC, so that it is NULL when none was found and the fallback runs.
Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260902123254.36987-1-sajal2005gupta@gmail.com?part=1
Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com>
Acked-by: Ruben Wauters <rubenru09@aol.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20260922084026.15481-1-sajal2005gupta@gmail.com
|
|
Tvrtko's patches (506aa8b02a8d "dma-fence: Add safe access helpers and
document the rules") added RCU protection to the returned strings from
get_timeline_name()/get_driver_name() callbacks of the dma_fence
backends.
This fixed use after free problems for a couple of drivers, but we never
documented the consequences for the drm_sched_fence.
Add a few words on the function documentation to note that we need an
RCU grace period between signaling the last hardware fence and
scheduler teardown.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20260914182740.1587-2-christian.koenig@amd.com
|
|
Sashiko points out that efi_handle_cmdline() allocates this memory and
hands it over to the caller. If efi_pe_entry() ever returns it should be
freed. Add a __free annotation.
Fixes: 42c8ea3dca09 ("efi: libstub: Factor out EFI stub entrypoint into separate file")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Sashiko points out the image_size should only be set if image_addr was
reassigned to some allocated memory. If image_size is not zero then the
caller will free the image_addr pointer.
efi_kaslr_relocate_kernel() never works like that, if it changes
image_addr to allocated memory the free is done through reserve_size.
Fixes: b7ac4b8ee73d ("riscv: libstub: Implement KASLR by using generic functions")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
cros_usbpd_notify_probe_acpi() takes the EC device pointer from
dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device.
That only holds when GOOG0003 is a child of GOOG0004. On older devices
without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are
siblings under the ACPI EC (PNP0C09):
PNP0C09:00 (acpi-ec)
|-- GOOG0003:00 (cros-usbpd-notify-acpi)
`-- GOOG0004:00 (cros_ec_lpcs)
Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform
one") the parent platform device had no driver data, so the driver
warned and continued without an EC pointer, as intended for these
devices. Since that commit the ACPI EC driver stores its struct acpi_ec
there, so the driver treats a struct acpi_ec as a struct cros_ec_device
and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging
or unplugging a charger then intermittently oopses, followed by soft
lockups and a hung system:
BUG: unable to handle page fault for address: ffffffff9cf03220
#PF: supervisor write access in kernel mode
Hardware name: Google Nami/Nami, BIOS 09/19/2019
Workqueue: kacpi_notify acpi_os_execute_deferred
RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330
Call Trace:
_raw_spin_lock_irqsave+0x59/0x80
__mutex_lock.constprop.0+0x129/0x930
cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto]
cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto]
cros_ec_cmd+0xb7/0x140 [cros_ec_proto]
cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify]
acpi_ev_notify_dispatch+0x4e/0x70
acpi_os_execute_deferred+0x1a/0x30
Only read the parent's driver data when the parent's ACPI node is
GOOG0004, and otherwise continue without an EC pointer. While at it,
drop the reference taken by fwnode_get_parent().
Fixes: db65a06d10b3 ("ACPI: EC: Convert the driver to a platform one")
Fixes: e4ee0bb077cd ("platform/chrome: cros_usbpd_notify: defer probe when parent EC driver isn't ready")
Cc: stable@vger.kernel.org
Assisted-by: claude-opus-5-5 checkpatch
Signed-off-by: James Fairweather <james.a.fairweather@gmail.com>
Reported-by: Sergey Tiraspolsky <stiraspo@gmail.com>
Closes: https://lore.kernel.org/all/20261003204623.18124-1-stiraspo@gmail.com
Tested-by: Sergey Tiraspolsky <stiraspo@gmail.com>
Link: https://lore.kernel.org/r/20261003222855.23707-1-james.a.fairweather@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Sashiko says fdt_addr can point to either an allocated fdt or the fdt from
get_fdt() which is memory owned by FW.
Only the allocated fdt should be freed on the error unwind path. Use a
dedicated variable for the allocation's size so that the free does not get
confused.
Fixes: 4fc8e738ff3e ("efi: libstub: remove DT dependency from generic stub")
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When the eFuse block covering MT7976C_EFUSE_OFFSET is invalid,
mt7996_mcu_get_eeprom() returns -EINVAL without writing buf, but
mt7996_variant_fem_init() tolerates -EINVAL and keeps running, so
buf[idx] == 0xc reads uninitialized stack memory. A stale 0x0c byte
misclassifies a 0x7976 aDie as 7976C, selects MT7996_FEM_INT and the
wrong default EEPROM, overriding valid calibration data. Only consult
the eFuse byte when the read succeeded; with an invalid eFuse, fall
back to the three explicit aDie version checks.
Fixes: e8cb33ad546a ("wifi: mt76: mt7996: add support for more variants")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Huang <huanglu@kylinos.cn>
Link: https://patch.msgid.link/20260930085435.1424493-1-huanglu@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The SAR power tables are parsed with a version byte from a different
ACPI table, never their own.
Some firmware declares version 1 and ships version 2 tables. The
entries then start a byte early, and the 6 GHz limits the table
carries are dropped, because the older layout has no room for them.
ASUS GA503RM, MTCL declares v1:
MTGS 28 bytes v1: (28-6) % 5 = 2, no fit v2: 3 tables
MTDS 19 bytes v1: (19-6) % 6 = 1, no fit v2: 1 table
The layouts accept disjoint lengths, so take whichever one fits and
keep it per table.
Reported-by: Sagun Kayastha <sgn.kayastha@gmail.com>
Closes: https://github.com/morrownr/mt76/issues/62
Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260905013551.24635-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Some ASUS firmware carries 0xff in MTGS power slots. The driver narrows
the byte to s8, so the slot reads as -1 in its 0.5 dBm units, wins the
min() against the regulatory limit and caps every rate the driver
programs. On an ASUS Zenbook 14 UM3406HA (MT7922) all six MTGS tables
hold 0xff in every power byte, and txpower_sku shows tmac 3 on every
supported OFDM/HT/VHT/HE rate against EEPROM entries of 25-39, under
both the FR and the world regulatory domain. Huy Nguyen Dinh Quang saw
the same clamp on a Vivobook S 14 M5406WA, with 5 GHz TX at ~40 Mbps,
and proposed skipping the geo entry.
Skip a geo entry whose power byte is 0xff. The MTDS entry is narrowed
the same way on its way into the geo lookup, so give it the same
treatment, and clamp the dynamic value plus offset at 127 so a no-limit
entry cannot wrap.
Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2515420
Reported-by: Huy Nguyen Dinh Quang <huynguyendinhquang@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/20260827134820.2607530-1-huynguyendinhquang@gmail.com/
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Tested-by: Cristian Fleischer <cristian.fleischer@gmail.com>
Link: https://patch.msgid.link/acb947435fc78d5c06039c7bd5609c735468b0ee.1789002236.git.junjie.cao@intel.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7603 uses a driver-private global station WCID for frames that have
neither a station nor a vif, including frames injected through a monitor
interface. Unlike the core global WCID initialized by
mt76_register_device(), this WCID is published without ever being passed
to mt76_wcid_init().
Since commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status"), mt76_tx() queues every such frame on the
WCID's tx_pending or tx_offchannel queue and links its tx_list. The first
injected frame therefore reaches __skb_queue_tail() with an uninitialized
sk_buff_head and dereferences a NULL prev pointer.
Initialize the WCID before publishing it.
The fix was tested on an MT7603 PCIe device. Three wildcard probe requests
were injected through a monitor interface. The hardware queue head and tail
advanced from 0 to 3 and a second radio captured the third request over the
air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer
also completed without a reset.
Fixes: 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Papa <pcristian292@gmail.com>
Link: https://patch.msgid.link/20260904010702.16306-1-pcristian292@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
band_idx starts out as 0xff, which tells the firmware to pick the band on
its own. A remain-on-channel grant normally writes a real index over it
before anything else looks. Two cases never see that: an MLD station
throws the grant away, and an AP has no association to trigger one.
The TX descriptor reads the same field into a two-bit slot, so the marker
comes out as 3. Every data frame from those two goes out tagged band 3.
Beacons are fine, they reach the firmware separately and never build a
descriptor.
Same numbers on an MT7925 and on a Netgear A9000:
stock patched
station, one link 0x00000001 0x00000001
station, two links 0x00003001 0x00000001
AP 0x00003013 0x00000013
real band index, STA 0x00001001 0x00001001
real band index, AP 0x00001013 0x00001013
Only the marker cases move.
Fixes: 0cb349d742d1 ("wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO")
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260911024428.65244-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt76 generic code. Disabling it in the mt76 generic code
was previously attempted and reverted because napi was disabled too
late and rx handlers could access freed structures. Note that the tx
side is enabled and disabled by the mt76 generic code.
It is disabled in mt7915_stop_hardware() since, unlike
mt7915_unregister_device(), is it also called in the probe path if an
error happens after rx napi is enabled.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260810154923.32546-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Correct the definition of struct mt7996_mcu_wed_rro_ba_delete_event to
match the 12-byte event record layout observed from firmware.
The event TLV sent by firmware is 12 bytes in length rather than 8 bytes.
It contains an additional 4 bytes that appear to be wlan_id and tid.
For example, a captured batch deletion of sessions 8, 9, and 10 (TIDs 6,
0, and 1) shows:
00000000: 02 00 0c 00 08 00 01 00 06 00 00 00 02 00 0c 00
00000010: 09 00 01 00 00 00 00 00 02 00 0c 00 0a 00 01 00
00000020: 01 00 00 00
The previous 8-byte structure corrupts the parsing of subsequent TLVs,
leading to unhandled delete events and erroneous session deletions.
Consequently, clients that create and tear down BA sessions in batches
(such as Apple Wi-Fi clients) fail to properly clean up stale sessions,
causing HW_RRO to be lost upon subsequent reassociations.
Fixes: a5d028d66836 ("wifi: mt76: mt7996: add wed rro delete session garbage collector")
Signed-off-by: Tao Gong <gongtao0607@gmail.com>
Link: https://patch.msgid.link/20260823053739.186748-1-gongtao0607@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Removing the last link of an MLD interface leaves the firmware with the
MLD BSS and DEV entry: the removal loop skips the deflink, and the
hweight16(mvif->valid_links) fallback reads the stale pre-update
valid_links, which is still non-zero. The entry keeps the per-link MAC
address, so every subsequent legacy association fails authentication
until the interface is removed or the module is reloaded.
Remove the deflink BSS and add it back as a legacy BSS on the transition
to zero links.
Fixes: 69acd6d910b0 ("wifi: mt76: mt7925: add mt7925_change_vif_links")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://patch.msgid.link/20260826043658.2255553-1-aaron.ma@canonical.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Running these packets through regular buffering queues could cause them
to hang, especially when the packets were for stations that in disassoc
state.
Fixes: dedf2ec30fe4 ("wifi: mt76: fix queue assignment for deauth packets")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260901092232.461379-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
state.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Link: https://patch.msgid.link/20260818125825.395538-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76 runs its own beacon monitor. mt76_beacon_mon_check() counts a miss
for each affiliated link of an MLD, and it stops the count while the phy
is off channel. mt7996 supplies it through mt76_rx_beacon(), but it does
not set CONNECTION_MONITOR. Therefore mac80211 also starts its legacy
monitor.
The legacy monitor knows one interface, not a set of links. It also
counts while the radio serves a different link. After seven beacon
intervals it removes an association that still carries traffic on the
other links.
Set the CONNECTION_MONITOR flag to disable the legacy monitor.
Fixes: 4df75606ece5 ("wifi: mt76: add per-link beacon monitoring for MLO")
Link: https://patch.msgid.link/20260818125825.395538-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Allow using Braille console with a serial console driver converted
to NBCON API
* tag 'printk-for-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
braille: nbcon: Allow to use a serial console with NBCON API as Braille console
|
|
The pingroup table has gcc_plltest at function 5 of gpio12 and does not
offer pwm2 on that pin, so the pinmux core rejects a request for pwm2 on
gpio12 as an invalid group. On the hardware, function 5 of gpio12
carries the PWM2 output: the Xiaomi AX3000T v2 drives its blue status
LED from PWM2 on gpio12.
The vendor kernel shipped on that router (Linux 4.4, stock firmware
2.0.28) has pwm2 in this slot. Its pingroup table, as read from the
firmware image, lists these functions for gpio12:
gpio, blsp0_spi, blsp0_i2c, blsp1_uart0, _, pwm2, qdss_tracedata_a,
_, _, _
and has pwm3 at function 4 of gpio13, matching commit c6c159fcdb4e
("pinctrl: qcom: ipq5018: add missing pwm3 function on gpio13").
Measured on the board: with gpio12 set to each of the 16 function
values in turn, and PWM2 held at 0% and then at 100% duty, the pad
level read back from GPIO_IN follows PWM2 only at function 5. There it
does not follow PWM channels 0, 1 or 3, and the LED switches with PWM2.
Functions 4 and 7, which the table leaves empty, do not carry PWM2.
Put pwm2 in function 5 of gpio12 and list gpio12 in pwm2_groups. Drop
gpio12 from gcc_plltest_groups: none of its functions is gcc_plltest
any more, and selecting it would trigger the WARN_ON() in
msm_pinmux_set_mux().
Fixes: 725d1c891658 ("pinctrl: qcom: Add IPQ5018 pinctrl driver")
Assisted-by: LLM
Signed-off-by: Adriel Santos <adriel@adriel.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20261002160958.908424-1-adriel@adriel.eu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|