| Age | Commit message (Collapse) | Author |
|---|
|
When arm_spe_pmu_next_off() fails to calculate a valid limit, it returns
zero to indicate that tracing should not start. However, the caller
arm_spe_perf_aux_output_begin() does not propagate this failure by
updating hwc->state, cause the error to be silently ignored by upper
layers.
Because hwc->state remains zero after a failure, arm_spe_pmu_start()
continues to programs filter registers unnecessarily. The driver
still reports success to the perf core, so the core assumes the SPE
event was enabled and proceeds to enable other events. This breaks
event group semantics: SPE is already stopped while other events in the
same group are enabled.
Fix this by updating arm_spe_perf_aux_output_begin() to return a status
code indicating success (0) or failure (-EIO). Both the interrupt
handler and arm_spe_pmu_start() check the return value and call
arm_spe_pmu_stop() to set PERF_HES_STOPPED in hwc->state.
In the interrupt handler, the period (e.g., period_left) needs to be
updated, so PERF_EF_UPDATE is passed to arm_spe_pmu_stop(). When the
error occurs during event start, the trace unit is not yet enabled, so
a flag '0' is used to drain buffer and update state only.
Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver currently returns an incorrect error code when a chain command
fails. In this case, ERT_CMD_STATE_ERROR is expected to be reported for
failed chain commands.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260203184037.2751889-1-lizhi.hou@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmc: Add quirk for MECHREVO Wujie 15X Pro
- classmate-laptop: Add missing NULL pointer checks
- hp-bioscfg: Skip empty attribute names
- intel_telemetry:
- Fix PSS event register mask
- Fix swapped arrays in PSS output
- intel/tpmi/plr: Make the file domain<n>/status writeable
- intel/vsec: Add Nova Lake PUNIT support
- lg-laptop: Recognize 2022-2025 models
- panasonic-laptop: Fix sysfs group leak in error path
- toshiba_haps: Fix memory leaks in add/remove routines
* tag 'platform-drivers-x86-v6.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/tpmi/plr: Make the file domain<n>/status writeable
platform/x86: hp-bioscfg: Skip empty attribute names
platform/x86: classmate-laptop: Add missing NULL pointer checks
platform/x86: lg-laptop: Recognize 2022-2025 models
platform/x86/amd/pmc: Add quirk for MECHREVO Wujie 15X Pro
platform/x86: intel_telemetry: Fix PSS event register mask
platform/x86: intel_telemetry: Fix swapped arrays in PSS output
platform/x86/intel/vsec: Add Nova Lake PUNIT support
platform/x86: toshiba_haps: Fix memory leaks in add/remove routines
platform/x86: panasonic-laptop: Fix sysfs group leak in error path
|
|
In order to use EFI runtime services, esp. ACPI PRM which uses the
efi_rts_wq workqueue, initialize EFI before CXL ACPI.
There is a subsys_initcall order dependency if driver is builtin:
subsys_initcall(cxl_acpi_init);
subsys_initcall(efisubsys_init);
Prevent the efi_rts_wq workqueue being used by cxl_acpi_init() before
its allocation. Use subsys_initcall_sync(cxl_acpi_init) to always run
efisubsys_init() first.
Reported-by: Gregory Price <gourry@gourry.net>
Tested-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20260114164837.1076338-10-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Introduce a callback to translate an endpoint's HPA range to the
address range of the root port which is the System Physical Address
(SPA) range used by a region. The callback can be set if a platform
needs to handle address translation.
The callback is attached to the root port. An endpoint's root port can
easily be determined in the PCI hierarchy without any CXL specific
knowledge. This allows the early use of address translation for CXL
enumeration. Address translation is esp. needed for the detection of
the root decoders. Thus, the callback is embedded in struct
cxl_root_ops instead of struct cxl_rd_ops.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-9-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
To find a region's root decoder, the endpoint's HPA range is used to
search the matching decoder by its range. With address translation the
endpoint decoder's range is in a different address space and thus
cannot be used to determine the root decoder.
The region parameters are encapsulated within struct cxl_region_context
and may include the translated Host Physical Address (HPA) range. Use
this context to identify the root decoder rather than relying on the
endpoint.
Modify cxl_find_root_decoder() and add the region context as
parameter. Rename this function to get_cxl_root_decoder() as a
counterpart to put_cxl_root_decoder(). Simplify the implementation by
removing function cxl_port_find_switch_decode(). The function is
unnecessary because it is not referenced or utilized elsewhere in the
code.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-8-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_calc_interleave_pos() uses the endpoint decoder's HPA range to
determine its interleaving position. This requires the endpoint
decoders to be an SPA, which is not the case for systems that need
address translation.
Add a separate @hpa_range argument to function
cxl_calc_interleave_pos() to specify the address range. Now it is
possible to pass the SPA translated address range of an endpoint
decoder to function cxl_calc_interleave_pos().
Refactor only, no functional changes.
Patch is a prerequisite to implement address translation.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-7-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
To construct a region, the region parameters such as address range and
interleaving config need to be determined. This is done while
constructing the region by inspecting the endpoint decoder
configuration. The endpoint decoder is passed as a function argument.
With address translation the endpoint decoder data is no longer
sufficient to extract the region parameters as some of the information
is obtained using other methods such as using firmware calls.
In a first step, separate code to determine the region parameters from
the region construction. Temporarily store all the data to create the
region in the new struct cxl_region_context. Once the region data is
determined and struct cxl_region_context is filled, construct the
region.
Patch is a prerequisite to implement address translation. The code
separation helps to later extend it to determine region parameters
using other methods as needed, esp. to support address translation.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-6-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A root port's callback handlers are collected in struct cxl_root_ops.
The structure is dynamically allocated, though it contains only a
single pointer in it. This also requires to check two pointers to
check for the existance of a callback.
Simplify the allocation, release and handler check by embedding the
ops statically in struct cxl_root.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-5-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Each region has a known host physical address (HPA) range it is
assigned to. Endpoint decoders assigned to a region share the same HPA
range. The region's address range is the system's physical address
(SPA) range.
Endpoint decoders in systems that need address translation use HPAs
which are not SPAs. To make the SPA range accessible to the endpoint
decoders, store and track the region's SPA range in struct cxl_region.
Introduce the @hpa_range member to the struct. Now, the SPA range of
an endpoint decoder can be determined based on its assigned region.
Patch is a prerequisite to implement address translation which uses
struct cxl_region to store all relevant region and interleaving
parameters.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-4-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A region is always bound to a root decoder. The region's associated
root decoder is often needed. Add it to struct cxl_region.
This simplifies the code by removing dynamic lookups and the root
decoder argument from the function argument list where possible.
Patch is a prerequisite to implement address translation which uses
struct cxl_region to store all relevant region and interleaving
parameters. It changes the argument list of __construct_region() in
preparation of adding a context argument. Additionally the arg list of
cxl_region_attach_position() is simplified and the use of
to_cxl_root_decoder() removed, which always reconstructs and checks
the pointer. The pointer never changes and is frequently used. Code
becomes more readable as this amphazises the binding between both
objects.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-3-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
@hpa is actually a @hpa_range, rename variables accordingly.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-2-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
One newly supported command does not require hardware context configuration
to be performed upfront. As a result, checking hardware context status
causes this command to fail incorrectly.
Remove hardware context status handling entirely. For other commands,
if userspace submits a request without configuring the hardware context
first, the firmware will report an error or time out as appropriate.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260202212450.2681273-1-lizhi.hou@amd.com
|
|
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd1610 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Cleanup and preparation to simplify the next changes.
Use current->tgid instead of current->group_leader->pid.
Link: https://lkml.kernel.org/r/aXY_2JIhCeGAYC0r@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cleanup and preparation to simplify the next changes.
Use current->tgid instead of current->group_leader->pid.
Link: https://lkml.kernel.org/r/aXY_0MrQBZWKbbmA@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Steven Price <steven.price@arm.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
checks
Nowadays task->group_leader->mm != task->mm is only possible if a) task is
not a group leader and b) task->group_leader->mm == NULL because
task->group_leader has already exited using sys_exit().
I don't think that drm/amd tries to detect/nack this case.
Link: https://lkml.kernel.org/r/aXY_yLVHd63UlWtm@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Christan König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cleanup and preparation to simplify the next changes.
- Use current->tgid instead of current->group_leader->pid
- Use get_task_pid(current, PIDTYPE_TGID) instead of
get_task_pid(current->group_leader, PIDTYPE_PID)
Link: https://lkml.kernel.org/r/aXY_wKewzV5lCa5I@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With or without this change the checked condition can be falsely true if
proc->tsk execs, but this is fine: binder_alloc_mmap_handler() checks
vma->vm_mm == alloc->mm.
Link: https://lkml.kernel.org/r/aXY_uPYyUg4rwNOg@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "don't abuse task_struct.group_leader", v2.
This series removes the usage of ->group_leader when it is "obviously
unnecessary".
I am going to move ->group_leader from task_struct to signal_struct or at
least add the new task_group_leader() helper. So I will send more
tree-wide changes on top of this series.
This patch (of 7):
Cleanup and preparation to simplify the next changes.
- Use current->tgid instead of current->group_leader->pid
- Use the value returned by get_task_struct() to initialize proc->tsk
Link: https://lkml.kernel.org/r/aXY_h8i78n6yD9JY@redhat.com
Link: https://lkml.kernel.org/r/aXY_ryGDwdygl1Tv@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In case the channel0 is unavailable and bailing out from free_child is
needed when we fail to add a DRM bridge for the available channel1,
pointer pc->ch[0] in the bailout path would be NULL and it would be
dereferenced as pc->ch[0]->bridge.next_bridge. Fix this by checking
pc->ch[0] before dereferencing it.
Fixes: ae754f049ce1 ("drm/bridge: imx8qxp-pixel-combiner: get/put the next bridge")
Fixes: 99764593528f ("drm/bridge: imx8qxp-pixel-combiner: convert to devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123-imx8qxp-drm-bridge-fixes-v1-3-8bb85ada5866@nxp.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
It doesn't make sense to use nohz_full without also isolating the
related CPUs from the domain topology, either through the use of
isolcpus= or cpuset isolated partitions.
And now HK_TYPE_DOMAIN includes all kinds of domain isolated CPUs.
This means that HK_TYPE_DOMAIN should always be a subset of
HK_TYPE_KERNEL_NOISE (of which HK_TYPE_WQ is only an alias).
Therefore sane configurations verify:
HK_TYPE_KERNEL_NOISE & HK_TYPE_DOMAIN == HK_TYPE_DOMAIN
Simplify the PCI probe target election accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-pci@vger.kernel.org
|
|
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against PCI probe works and make sure that no
asynchronous probing is still pending or executing on a newly isolated
CPU, the housekeeping subsystem must flush the PCI probe works.
However the PCI probe works can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a PCI probe-specific pool and provide and use
the appropriate flushing API.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-pci@vger.kernel.org
|
|
HK_TYPE_DOMAIN_BOOT
Make sure /sys/devices/system/cpu/isolated only prints what was passed
through the isolcpus= parameter before HK_TYPE_DOMAIN will also
integrate cpuset isolated partitions.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
|
|
Set up global DSCP/PCP priority mappings and add related DCB methods.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-6-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
yt921x_chip_setup() is already pretty long, and is going to become
longer. Split it into parts.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-5-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Create a helper function to centralize the logic for enabling and
disabling VLAN awareness on a port.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260131021854.3405036-4-mmyangfl@gmail.com
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add current (iova, len) to the iotlb gather, regardless of the setting
of PT_FEAT_FLUSH_RANGE or PT_FEAT_FLUSH_RANGE_NO_GAPS.
In gather_range_pages(), the current IOVA range is only added to
iotlb_gather when PT_FEAT_FLUSH_RANGE is set. Yet a virtual IOMMU with
NpCache uses only PT_FEAT_FLUSH_RANGE_NO_GAPS. In that case, iotlb_gather
will stay empty (start=ULONG_MAX, end=0) after initialization, and the
current (iova, len) will not be added to the iotlb_gather, causing
subsequent iommu_iotlb_sync() to perform IOTLB invalidation with wrong
parameters (e.g., amd_iommu_iotlb_sync() computes size from
gather->end - gather->start + 1, leading to an invalid range).
The disjoint check and sync for PT_FEAT_FLUSH_RANGE_NO_GAPS remain
unchanged: when the new range is disjoint from the existing gather,
we still sync first and then add the new range, so semantics for
NO_GAPS are preserved.
Fixes: 7c53f4238aa8 ("iommupt: Add unmap_pages op")
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return.
Fixes: d2a0cac10597 ("iommu/amd: move wait_on_sem() out of spinlock")
Tested-by: Srikanth Aithal <sraithal@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Not pausing it means that we can have the TCM work queued into a
non-freezable workqueue, which, in resume, is re-activated before the
driver's resume is called.
The TCM work might send commands to the FW before we resumed the device,
leading to an assert.
Closes: https://lore.kernel.org/linux-wireless/aTDoDiD55qlUZ0pn@debian.local/
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260129212650.05621f3faedb.I44df9cf9183b5143df8078131e0d87c0fd7e1763@changeid
|
|
mlo_scan_start_wk is not canceled on disconnection. In fact, it is not
canceled anywhere except in the restart cleanup, where we don't really
have to.
This can cause an init-after-queue issue: if, for example, the work was
queued and then drv_change_interface got executed.
This can also cause use-after-free: if the work is executed after the
vif is freed.
Fixes: 9748ad82a9d9 ("wifi: iwlwifi: defer MLO scan after link activation")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260129212650.a36482a60719.I5bf64a108ca39dacb5ca0dcd8b7258a3ce8db74c@changeid
|
|
Currently, s32g_pcie_parse_ports() exercises the 'err_port' path even
during the success case. This results in ports getting deleted after
successful parsing of Root Ports.
Hence, skip the removal of Root Ports during success.
Fixes: 5cbc7d3e316e ("PCI: s32g: Add NXP S32G PCIe controller driver (RC)")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260202151050.1446165-1-vincent.guittot@linaro.org
|
|
wlc_phy_txpwr_srom_read_lcnphy() in wlc_phy_attach_lcnphy() always
returns true, making the error handling code unreachable. Change the
function's return type to void and remove the dead code, similar to
the cleanup done for wlc_phy_txpwr_srom_read_nphy() in commit
47f0e32ffe4e ("wifi: brcmsmac: phy: Remove unreachable code").
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260131172355.3367673-1-ingyujang25@korea.ac.kr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202512181203.IOv6IChH-lkp@intel.com/
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Last user dsa_loop has been migrated away from modalias-based matching,
so we can remove this feature now. It was the only user of MDIO_NAME_SIZE,
so remove also this constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change is a prerequisite for removing the MDIO device modalias,
as dsa_loop is the only user. Switch from modalias to a custom
bus match function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/15a4318f-50b5-4df5-874e-e387ee070a9d@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Primary reason for this change is to remove the misuse of MDIO_NAME_SIZE
here, so that this constant can be removed in a follow-up patch.
Use case here is simply a chip name w/o any relationship to a MDIO
device. Also there's no need to reserve a longer char array, so make
the name a pointer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/61bc14fa-eed3-43b6-ae40-b98063e81578@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case to verify correct synchronization between concurrent
readers and a revocation.
The test setup involves:
1. Consumer 1 enters the critical section (SRCU read lock) and verifies
access to the resource.
2. Provider attempts to revoke the resource. This should block until
Consumer 1 releases the lock.
3. Consumer 2 attempts to enter the critical section while revocation
is pending. It should see the resource as revoked (NULL).
4. Consumer 1 exits, allowing the revocation to complete.
This ensures that the SRCU mechanism correctly enforces grace periods
and that new readers are properly prevented from accessing the resource
once revocation has begun.
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
--kconfig_add CONFIG_PROVE_LOCKING=y \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_DEBUG_INFO=y \
--kconfig_add CONFIG_DEBUG_INFO_DWARF5=y \
--kconfig_add CONFIG_KASAN=y \
--kconfig_add CONFIG_DETECT_HUNG_TASK=y \
--kconfig_add CONFIG_DEFAULT_HUNG_TASK_TIMEOUT="10" \
--arch=x86_64 --raw_output=all \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-5-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct revocable handle stores the SRCU read-side index (idx) for
the duration of a resource access. If multiple threads share the same
struct revocable instance, they race on writing to the idx field,
corrupting the SRCU state and potentially causing unsafe unlocks.
Refactor the API to replace revocable_alloc()/revocable_free() with
revocable_init()/revocable_deinit(). This change requires the caller
to provide the storage for struct revocable.
By moving storage ownership to the caller, the API ensures that
concurrent users maintain their own private idx storage, eliminating
the race condition.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/20260124170535.11756-4-johan@kernel.org/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-4-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a test to verify that revocable_alloc() correctly handles race
conditions where the provider is being released.
The test covers three scenarios:
1. Allocating from a NULL provider.
2. Allocating from a provider that has been detached (pointer is NULL).
3. Allocating from a provider that is in the process of destruction
(refcount is 0), simulating a race between revocable_alloc() and
revocable_provider_release().
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
--kconfig_add CONFIG_PROVE_LOCKING=y \
--kconfig_add CONFIG_DEBUG_KERNEL=y \
--kconfig_add CONFIG_DEBUG_INFO=y \
--kconfig_add CONFIG_DEBUG_INFO_DWARF5=y \
--kconfig_add CONFIG_KASAN=y \
--kconfig_add CONFIG_DETECT_HUNG_TASK=y \
--kconfig_add CONFIG_DEFAULT_HUNG_TASK_TIMEOUT="10" \
--arch=x86_64 --raw_output=all \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-3-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two race conditions when allocating a revocable instance:
1. After a struct revocable_provider is revoked, the caller might still
hold a dangling pointer to it. A subsequent call to
revocable_alloc() can trigger a use-after-free.
2. If revocable_provider_release() runs concurrently with
revocable_alloc(), the memory of struct revocable_provider can be
accessed during or after kfree().
To fix these:
- Manage the lifetime of struct revocable_provider using RCU. Annotate
pointers to it with __rcu and use kfree_rcu() for deallocation.
- Update revocable_alloc() to safely acquire a reference using RCU
primitives.
- Update revocable_provider_revoke() to take a double pointer (`**rp`).
It atomically NULLs out the caller's pointer before starting
revocation. This prevents the caller from holding a dangling pointer.
- Drop devm_revocable_provider_alloc(). The devm-managed model cannot
support the required double-pointer semantic for safe pointer nulling.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/aXdy-b3GOJkzGqYo@hovoldconsulting.com/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:95:16: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
95 | .vbr_enable = 0,
| ^
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:90:16: note: previous initialization is here
90 | .vbr_enable = false,
| ^~~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:97:19: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
97 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:91:19: note: previous initialization is here
91 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:132:25: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
132 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:126:25: note: previous initialization is here
126 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:133:20: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
133 | .nfl_bpg_offset = 3511,
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:108:20: note: previous initialization is here
108 | .nfl_bpg_offset = 1402,
| ^~~~
GCC would warn about this in the same manner but its version,
-Woverride-init, is disabled for a normal kernel build in
scripts/Makefile.warn. For clang, -Wextra in drivers/gpu/drm/Makefile
turns it back but GCC respects turning it off earlier in the command
line.
Of all the duplicate fields in the initializer, only nfl_bpg_offset is a
different value. Clear up the duplicate initializers, keeping the
'false' value for .vbr_enable, as it is bool, and the second value for
.nfl_bpg_offset, assuming it is the correct one since it was the one
tested in the original change.
Fixes: 65ce1f5834e9 ("drm/panel: ilitek-ili9882t: Switch Tianma TL121BVMS07 to DSC 120Hz mode")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260114-panel-ilitek-ili9882t-fix-override-init-v1-1-1d69a2b096df@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke other
interrupt handlers and this supposed to happen from hard interrupt context.
Use IRQF_NO_THREAD to forbid forced-threading.
Fixes: 0ab13674a9bd1 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-21-bigeasy@linutronix.de
|
|
The dwmac core has no support for SGMII without using its integrated
PCS. Thus, PHY_INTF_SEL_SGMII is only supported when this block is
present, and it makes no sense for stmmac_get_phy_intf_sel() to decode
this.
None of the platform glue users that use stmmac_get_phy_intf_sel()
directly accept PHY_INTF_SEL_SGMII as a valid mode.
Check whether a PCS will be used by the driver for the interface mode,
and if it is the integrated PCS, query the integrated PCS for the
phy_intf_sel_i value to use.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vlmOa-00000006zvB-1fIe@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move most of the PCS register offset definitions to stmmac_pcs.c.
Since stmmac_pcs.c only ever passes zero into the register offset
macros, remove that ability, making them simple constant integer
definitions.
Add appropriate descriptions of the registers, pointing out their
similarity with their IEEE 802.3 counterparts. Make use of the
BMSR definitions for the GMAC_AN_STATUS register and remove the
driver private versions.
Note that BMSR_LSTATUS is non-low-latching, unlike it's 802.3z
counterpart.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vlmOV-00000006zv5-1CwO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Where a core supports hardware features, but does not indicate support
for half-duplex, clear phylink's half-duplex 1G, 100M and 10M
capability bits to disallow half-duplex operation and advertisement of
these link modes.
This will avoid the need for special code in the PCS driver to do this
based on the ESTATUS register bits, as the support in the PCS is
dependent on the same synthesis choice as the MAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vlmOQ-00000006zuz-0ffN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver never programs the MAC frame size and jabber registers,
causing the hardware to reject frames larger than the default 1518
bytes even when larger DMA buffers are allocated.
Program MAC_MAXIMUM_FRAME_SIZE, MAC_TRANSMIT_JABBER_SIZE, and
MAC_RECEIVE_JABBER_SIZE based on the configured MTU. Also fix the
maximum buffer size from 4096 to 4095, since the descriptor buffer
size field is only 12 bits. Account for double VLAN tags in frame
size calculations.
Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Link: https://patch.msgid.link/20260130102301.477514-1-tmshlvck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compared to other Renesas GBETH stmmac glue drivers, RZ/G3L GBETH IP use
the version Synopsys DesignWare MAC (version 5.30). It has an extra clock
compared to RZ/V2H and has ptp_pps_o interrupts. Add support for RZ/G3L
GBETH by reusing device data of RZ/V2H and can be extended to add other
functionalities later.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260131161250.5047-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
