summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)Author
2016-09-27fs: rename "rename2" i_op to "rename"Miklos Szeredi
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-26Btrfs: remove unnecessary btrfs_mark_buffer_dirty in split_leafLiu Bo
When we're not able to get enough space through splitting leaf, we'd create a new sibling leaf instead, and it's possible that we return a zero-nritem sibling leaf and mark it dirty before it's in a consistent state. With CONFIG_BTRFS_FS_CHECK_INTEGRITY=y, the integrity check of check_leaf will report panic due to this zero-nritem non-root leaf. This removes the unnecessary btrfs_mark_buffer_dirty. Reported-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: don't BUG() during drop snapshotJosef Bacik
Really there's lots of things that can go wrong here, kill all the BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO instead. Signed-off-by: Josef Bacik <jbacik@fb.com> [ switched to btrfs_err, errors go to common label ] Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: fix btrfs_no_printk stub helperArnd Bergmann
The addition of btrfs_no_printk() caused a build failure when CONFIG_PRINTK is disabled: fs/btrfs/send.c: In function 'send_rename': fs/btrfs/ctree.h:3367:2: error: implicit declaration of function 'btrfs_no_printk' [-Werror=implicit-function-declaration] This moves the helper outside of that #ifdef so it is always defined, and changes the existing #ifdef to refer to that helper as well for consistency. Fixes: 47c57058ff2c ("btrfs: btrfs_debug should consume fs_info when DEBUG is not defined") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: memset to avoid stale content in btree leafLiu Bo
This is an additional patch to "Btrfs: memset to avoid stale content in btree node block". This uses memset to initialize the unused space in a leaf to avoid potential stale content, which may be incurred by pushing items between sibling leaves. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: parent_start initialization cleanupGoldwyn Rodrigues
Code cleanup. parent_start is initialized multiple times when it is not necessary to do so. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: Remove already completed TODO commentGoldwyn Rodrigues
Fixes: 7cf5b97650f2 ("btrfs: qgroup: Cleanup old inaccurate facilities") Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: Do not reassign count in btrfs_run_delayed_refsGoldwyn Rodrigues
Code cleanup. count is already (unsgined long)-1. That is the reason run_all was set. Do not reassign it (unsigned long)-1. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: fix a possible umount deadlockAnand Jain
btrfs_show_devname() is using the device_list_mutex, sometimes a call to blkdev_put() leads vfs calling into this func. So call blkdev_put() outside of device_list_mutex, as of now. [ 983.284212] ====================================================== [ 983.290401] [ INFO: possible circular locking dependency detected ] [ 983.296677] 4.8.0-rc5-ceph-00023-g1b39cec2 #1 Not tainted [ 983.302081] ------------------------------------------------------- [ 983.308357] umount/21720 is trying to acquire lock: [ 983.313243] (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.321264] [ 983.321264] but task is already holding lock: [ 983.327101] (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.337839] [ 983.337839] which lock already depends on the new lock. [ 983.337839] [ 983.346024] [ 983.346024] the existing dependency chain (in reverse order) is: [ 983.353512] -> #4 (&fs_devs->device_list_mutex){+.+...}: [ 983.359096] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.365143] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.371521] [<ffffffffc02d8116>] btrfs_show_devname+0x36/0x1f0 [btrfs] [ 983.378710] [<ffffffff9129523e>] show_vfsmnt+0x4e/0x150 [ 983.384593] [<ffffffff9126ffc7>] m_show+0x17/0x20 [ 983.389957] [<ffffffff91276405>] seq_read+0x2b5/0x3b0 [ 983.395669] [<ffffffff9124c808>] __vfs_read+0x28/0x100 [ 983.401464] [<ffffffff9124eb3b>] vfs_read+0xab/0x150 [ 983.407080] [<ffffffff9124ec32>] SyS_read+0x52/0xb0 [ 983.412609] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.419617] -> #3 (namespace_sem){++++++}: [ 983.424024] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.430074] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.435785] [<ffffffff91272457>] lock_mount+0x67/0x1c0 [ 983.441582] [<ffffffff91272ab2>] do_add_mount+0x32/0xf0 [ 983.447458] [<ffffffff9127363a>] finish_automount+0x5a/0xc0 [ 983.453682] [<ffffffff91259513>] follow_managed+0x1b3/0x2a0 [ 983.459912] [<ffffffff9125b750>] lookup_fast+0x300/0x350 [ 983.465875] [<ffffffff9125d6e7>] path_openat+0x3a7/0xaa0 [ 983.471846] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.477731] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.483702] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.489240] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.496254] -> #2 (&sb->s_type->i_mutex_key#3){+.+.+.}: [ 983.501798] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.507855] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.513558] [<ffffffff91366237>] start_creating+0x87/0x100 [ 983.519703] [<ffffffff91366647>] debugfs_create_dir+0x17/0x100 [ 983.526195] [<ffffffff911df153>] bdi_register+0x93/0x210 [ 983.532165] [<ffffffff911df313>] bdi_register_owner+0x43/0x70 [ 983.538570] [<ffffffff914080fb>] device_add_disk+0x1fb/0x450 [ 983.544888] [<ffffffff91580226>] loop_add+0x1e6/0x290 [ 983.550596] [<ffffffff91fec358>] loop_init+0x10b/0x14f [ 983.556394] [<ffffffff91002207>] do_one_initcall+0xa7/0x180 [ 983.562618] [<ffffffff91f932e0>] kernel_init_freeable+0x1cc/0x266 [ 983.569370] [<ffffffff918174be>] kernel_init+0xe/0x100 [ 983.575166] [<ffffffff9182620f>] ret_from_fork+0x1f/0x40 [ 983.581131] -> #1 (loop_index_mutex){+.+.+.}: [ 983.585801] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.591858] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.598256] [<ffffffff9157ed3f>] lo_open+0x1f/0x60 [ 983.603704] [<ffffffff9128eec3>] __blkdev_get+0x123/0x400 [ 983.609757] [<ffffffff9128f4ea>] blkdev_get+0x34a/0x350 [ 983.615639] [<ffffffff9128f554>] blkdev_open+0x64/0x80 [ 983.621428] [<ffffffff9124aff6>] do_dentry_open+0x1c6/0x2d0 [ 983.627651] [<ffffffff9124c029>] vfs_open+0x69/0x80 [ 983.633181] [<ffffffff9125db74>] path_openat+0x834/0xaa0 [ 983.639152] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.645035] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.650999] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.656535] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.663541] -> #0 (&bdev->bd_mutex){+.+.+.}: [ 983.668107] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.674510] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.680561] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.686967] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.692761] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.699699] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.707178] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 983.714380] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 983.721061] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 983.727908] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 983.734744] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 983.740888] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 983.747909] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 983.754745] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 983.760977] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 983.766773] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 983.772738] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 983.778708] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 983.785373] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 983.792212] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 [ 983.799225] [ 983.799225] other info that might help us debug this: [ 983.799225] [ 983.807291] Chain exists of: &bdev->bd_mutex --> namespace_sem --> &fs_devs->device_list_mutex [ 983.816521] Possible unsafe locking scenario: [ 983.816521] [ 983.822489] CPU0 CPU1 [ 983.827043] ---- ---- [ 983.831599] lock(&fs_devs->device_list_mutex); [ 983.836289] lock(namespace_sem); [ 983.842268] lock(&fs_devs->device_list_mutex); [ 983.849478] lock(&bdev->bd_mutex); [ 983.853127] [ 983.853127] *** DEADLOCK *** [ 983.853127] [ 983.859113] 3 locks held by umount/21720: [ 983.863145] #0: (&type->s_umount_key#35){++++..}, at: [<ffffffff912515f5>] deactivate_super+0x55/0x70 [ 983.872713] #1: (uuid_mutex){+.+.+.}, at: [<ffffffffc033d8d3>] btrfs_close_devices+0x23/0xa0 [btrfs] [ 983.882206] #2: (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.893422] [ 983.893422] stack backtrace: [ 983.897824] CPU: 6 PID: 21720 Comm: umount Not tainted 4.8.0-rc5-ceph-00023-g1b39cec2 #1 [ 983.905958] Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 1.0c 09/07/2015 [ 983.913492] 0000000000000000 ffff8c8a53c17a38 ffffffff91429521 ffffffff9260f4f0 [ 983.921018] ffffffff92642760 ffff8c8a53c17a88 ffffffff911b2b04 0000000000000050 [ 983.928542] ffffffff9237d620 ffff8c8a5294aee0 ffff8c8a5294aeb8 ffff8c8a5294aee0 [ 983.936072] Call Trace: [ 983.938545] [<ffffffff91429521>] dump_stack+0x85/0xc4 [ 983.943715] [<ffffffff911b2b04>] print_circular_bug+0x1fb/0x20c [ 983.949748] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.955613] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.961123] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.966550] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.972407] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.977832] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.983101] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.989500] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.996415] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 984.003068] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 984.009189] [<ffffffff9126cc5e>] ? evict_inodes+0x15e/0x170 [ 984.014881] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 984.021176] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 984.027476] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 984.033082] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 984.039548] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 984.045839] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 984.051525] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 984.056774] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 984.062201] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 984.067625] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 984.073747] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 984.080038] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 Reported-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: fix memory leak in do_walk_downLiu Bo
The extent buffer 'next' needs to be free'd conditionally. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: btrfs_debug should consume fs_info when DEBUG is not definedJeff Mahoney
We can hit unused variable warnings when btrfs_debug and friends are just aliases for no_printk. This is due to the fs_info not getting consumed by the function call, which can happen if convenenience variables are used. This patch adds a new btrfs_no_printk static inline that consumes the convenience variable and does nothing else. It silences the unused variable warning and has no impact on the generated code: $ size fs/btrfs/extent_io.o* text data bss dec hex filename 44072 152 32 44256 ace0 fs/btrfs/extent_io.o.btrfs_no_printk 44072 152 32 44256 ace0 fs/btrfs/extent_io.o.no_printk Fixes: 27a0dd61a5 (Btrfs: make btrfs_debug match pr_debug handling related to DEBUG) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert send's verbose_printk to btrfs_debugJeff Mahoney
This was basically an open-coded, less flexible dynamic printk. We can just use btrfs_debug instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert pr_* to btrfs_* where possibleJeff Mahoney
For many printks, we want to know which file system issued the message. This patch converts most pr_* calls to use the btrfs_* versions instead. In some cases, this means adding plumbing to allow call sites access to an fs_info pointer. fs/btrfs/check-integrity.c is left alone for another day. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert printk(KERN_* to use pr_* callsJeff Mahoney
This patch converts printk(KERN_* style messages to use the pr_* versions. One side effect is that anything that was KERN_DEBUG is now automatically a dynamic debug message. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: unsplit printed stringsJeff Mahoney
CodingStyle chapter 2: "[...] never break user-visible strings such as printk messages, because that breaks the ability to grep for them." This patch unsplits user-visible strings. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: clean the old superblocks before freeing the deviceJeff Mahoney
btrfs_rm_device frees the block device but then re-opens it using the saved device name. A race exists between the close and the re-open that allows the block size to be changed. The result is getting stuck forever in the reclaim loop in __getblk_slow. This patch moves the superblock cleanup before closing the block device, which is also consistent with other callers. We also don't need a private copy of dev_name as the whole routine operates under the uuid_mutex. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: kill BUG_ON in run_delayed_tree_refLiu Bo
In a corrupted btrfs image, we can come across this BUG_ON and get an unreponsive system, but if we return errors instead, its caller can handle everything gracefully by aborting the current transaction. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: don't leak reloc root nodes on errorJosef Bacik
We don't track the reloc roots in any sort of normal way, so the only way the root/commit_root nodes get free'd is if the relocation finishes successfully and the reloc root is deleted. Fix this by free'ing them in free_reloc_roots. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: squash lines for simple wrapper functionsMasahiro Yamada
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: improve check_node to avoid reading corrupted nodesLiu Bo
We need to check items in a node to make sure that we're reading a valid one, otherwise we could get various crashes while processing delayed_refs. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: add error handling for extent buffer in print treeLiu Bo
Somehow we missed btrfs_print_tree when last time we updated error handling for read_extent_block(). This keeps us from getting a NULL pointer panic when btrfs_print_tree's read_extent_block() fails. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: remove BUG_ON in start_transactionLiu Bo
Since we could get errors from the concurrent aborted transaction, the check of this BUG_ON in start_transaction is not true any more. Say, while flushing free space cache inode's dirty pages, btrfs_finish_ordered_io -> btrfs_join_transaction_nolock (the transaction has been aborted.) -> BUG_ON(type == TRANS_JOIN_NOLOCK); Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: memset to avoid stale content in btree node blockLiu Bo
During updating btree, we could push items between sibling nodes/leaves, for leaves data sections starts reversely from the end of the block while for nodes we only have key pairs which are stored one by one from the start of the block. So we could do try to push key pairs from one node to the next node right in the tree, and after that, we update the node's nritems to reflect the correct end while leaving the stale content in the node. One may intentionally corrupt the fs image and access the stale content by bumping the nritems and causes various crashes. This takes the in-memory @nritems as the correct one and gets to memset the unused part of a btree node. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: return gracefully from balance if fs tree is corruptedLiu Bo
When relocating tree blocks, we firstly get block information from back references in the extent tree, we then search fs tree to try to find all parents of a block. However, if fs tree is corrupted, eg. if there're some missing items, we could come across these WARN_ONs and BUG_ONs. This makes us print some error messages and return gracefully from balance. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: kill BUG_ON()'s in btrfs_mark_extent_writtenJosef Bacik
No reason to bug on in here, fs corruption could easily cause these things to happen. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: kill the start argument to read_extent_buffer_pagesJosef Bacik
Nobody uses this, it makes no sense to do partial reads of extent buffers. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: add a flags field to btrfs_fs_infoJosef Bacik
We have a lot of random ints in btrfs_fs_info that can be put into flags. This is mostly equivalent with the exception of how we deal with quota going on or off, now instead we set a flag when we are turning it on or off and deal with that appropriately, rather than just having a pending state that the current quota_enabled gets set to. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: extend btrfs_set_extent_delalloc and its friends to support in-band ↵Qu Wenruo
dedupe and subpage size patchset Extend btrfs_set_extent_delalloc() and extent_clear_unlock_delalloc() parameters for both in-band dedupe and subpage sector size patchset. This should reduce conflict of both patchset and the effort to rebase them. Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com> Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: add dynamic debug supportJeff Mahoney
We can re-use the dynamic debugging descriptor to make use of the dynamic debugging mechanism but still use our own printk interface. Defining the DEBUG macro works as it did before. When it's defined, all of the messages default to print. We can also enable all debug messages at boot or module-load time using the 'dyndbg' and 'btrfs.dyndbg' options. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: Fix warning "variable ‘gen’ set but not used"Luis Henriques
Variable 'gen' in reada_for_search() is not used since commit 58dc4ce43251 ("btrfs: remove unused parameter from readahead_tree_block"). This patch simply removes this variable. Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: Fix warning "variable ‘blocksize’ set but not used"Luis Henriques
Variable 'blocksize' in reada_walk_down() is not used since commit d3e46fea1b1e ("btrfs: sink blocksize parameter to readahead_tree_block"). This patch simply removes this variable. Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: let btrfs_delete_unused_bgs() to clean relocated bgsNaohiro Aota
Currently, btrfs_relocate_chunk() is removing relocated BG by itself. But the work can be done by btrfs_delete_unused_bgs() (and it's better since it trim the BG). Let's dedupe the code. While btrfs_delete_unused_bgs() is already hitting the relocated BG, it skip the BG since the BG has "ro" flag set (to keep balancing BG intact). On the other hand, btrfs cannot drop "ro" flag here to prevent additional writes. So this patch make use of "removed" flag. btrfs_delete_unused_bgs() now detect the flag to distinguish whether a read-only BG is relocating or not. Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: bail out if block group has different mixed flagLiu Bo
Currently we allow inconsistence about mixed flag (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA). We'd get ENOSPC if block group has mixed flag and btrfs doesn't. If that happens, we have one space_info with mixed flag and another space_info only with BTRFS_BLOCK_GROUP_METADATA, and global_block_rsv.space_info points to the latter one, but all bytes from block_group contributes to the mixed space_info, thus all the allocation will fail with ENOSPC. This adds a check for the above case. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> [ updated message ] Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: fix memory leak in reading btree blocksLiu Bo
So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: remove BUG() in raid56Liu Bo
This BUG() has been triggered by a fuzz testing image, which contains an invalid chunk type, ie. a single stripe chunk has the raid6 type. Btrfs can handle this gracefully by returning -EIO, so besides using btrfs_warn to give us more debugging information rather than a single BUG(), we can return error properly. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: fix check_shared for fiemap ioctlLu Fengqi
Only in the case of different root_id or different object_id, check_shared identified extent as the shared. However, If a extent was referred by different offset of same file, it should also be identified as shared. In addition, check_shared's loop scale is at least n^3, so if a extent has too many references, even causes soft hang up. First, add all delayed_ref to the ref_tree and calculate the unqiue_refs, if the unique_refs is greater than one, return BACKREF_FOUND_SHARED. Then individually add the on-disk reference(inline/keyed) to the ref_tree and calculate the unique_refs of the ref_tree to check if the unique_refs is greater than one.Because once there are two references to return SHARED, so the time complexity is close to the constant. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: create example debugfs file only in debugging buildDavid Sterba
Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: fix perms on demonstration debugfs interfaceEric Sandeen
btrfs provides a helpful demonstration of how to export a global variable via debugfs; however, it is unique among other debugfs files in that it is world-writable, which causes some concern to people who are not familiar with its purpose. Fix it so that it is only user-writable. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26Btrfs: fix memory leak of block group cacheLiu Bo
While processing delayed refs, we may update block group's statistics and attach it to cur_trans->dirty_bgs, and later writing dirty block groups will process the list, which happens during btrfs_commit_transaction(). For whatever reason, the transaction is aborted and dirty_bgs is not processed in cleanup_transaction(), we end up with memory leak of these dirty block group cache. Since btrfs_start_dirty_block_groups() doesn't make it go to the commit critical section, this also adds the cleanup work inside it. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-23Merge branch 'for-linus-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Josef fixed a problem when quotas are enabled with his latest ENOSPC rework, and Jeff added more checks into the subvol ioctls to avoid tripping up lookup_one_len" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: ensure that file descriptor used with subvol ioctls is a dir Btrfs: handle quota reserve failure properly
2016-09-22fs: Give dentry to inode_change_ok() instead of inodeJan Kara
inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-22posix_acl: Clear SGID bit when setting file permissionsJan Kara
When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2016-09-21btrfs: ensure that file descriptor used with subvol ioctls is a dirJeff Mahoney
If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl) Cc: <stable@vger.kernel.org> #v2.6.29+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-09-21Btrfs: handle quota reserve failure properlyJosef Bacik
btrfs/022 was spitting a warning for the case that we exceed the quota. If we fail to make our quota reservation we need to clean up our data space reservation. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Tested-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-09-16btrfs: use filemap_check_errors()Miklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Cc: Chris Mason <clm@fb.com>
2016-09-14block, dm-crypt, btrfs: Introduce bio_flags()Bart Van Assche
Introduce the bio_flags() macro. Ensure that the second argument of bio_set_op_attrs() only contains flags and no operation. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Chris Mason <clm@fb.com> (maintainer:BTRFS FILE SYSTEM) Cc: Josef Bacik <jbacik@fb.com> (maintainer:BTRFS FILE SYSTEM) Cc: Mike Snitzer <snitzer@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-09Merge branch 'for-linus-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I'm not proud of how long it took me to track down that one liner in btrfs_sync_log(), but the good news is the patches I was trying to blame for these problems were actually fine (sorry Filipe)" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns btrfs: do not decrease bytes_may_use when replaying extents
2016-09-07Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.8
2016-09-06btrfs: introduce tickets_id to determine whether asynchronous metadata ↵Wang Xiaoguang
reclaim work makes progress In btrfs_async_reclaim_metadata_space(), we use ticket's address to determine whether asynchronous metadata reclaim work is making progress. ticket = list_first_entry(&space_info->tickets, struct reserve_ticket, list); if (last_ticket == ticket) { flush_state++; } else { last_ticket = ticket; flush_state = FLUSH_DELAYED_ITEMS_NR; if (commit_cycles) commit_cycles--; } But indeed it's wrong, we should not rely on local variable's address to do this check, because addresses may be same. In my test environment, I dd one 168MB file in a 256MB fs, found that for this file, every time wait_reserve_ticket() called, local variable ticket's address is same, For above codes, assume a previous ticket's address is addrA, last_ticket is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and wake up it, then another ticket is added, but with the same address addrA, now last_ticket will be same to current ticket, then current ticket's flush work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR, which may result in some enospc issues(I have seen this in my test machine). Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-06Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returnsChris Mason
We use a btrfs_log_ctx structure to pass information into the tree log commit, and get error values out. It gets added to a per log-transaction list which we walk when things go bad. Commit d1433debe added an optimization to skip waiting for the log commit, but didn't take root_log_ctx out of the list. This patch makes sure we remove things before exiting. Signed-off-by: Chris Mason <clm@fb.com> Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4 cc: stable@vger.kernel.org # 3.15+
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-20 10:50:10 +0000