Age | Commit message (Collapse) | Author |
|
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of
them removes that bit.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... unfortunately, cifs bug got copied. Fix is essentially the same.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We were iterating across stripe boundaries properly, but not moving the
write buffer pointer forward. This caused us to rewrite the same data
after the break. Fix by adjusting the data pointer forward, and
recalculating the io and buffer alignment after the break.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
dd if=/dev/urandom of=/mnt/fs_depot/dd10 bs=500 seek=8388 count=1
dd if=/mnt/fs_depot/dd10 of=/root/dd10out bs=500 skip=8388 count=1
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.
Reported-by: Brian Chrisman <brchrisman@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Getting ENOENT is equivalent to reading 0 bytes. Make that correction
before setting up the hit_stripe and was_short flags.
Fixes the following case:
dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer. For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.
Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
In e9964c10 we change cap flushing to do a delicate dance because some
inodes on the cap_dirty list could be in a migrating state (got EXPORT but
not IMPORT) in which we couldn't actually flush and move from
dirty->flushing, breaking the while (!empty) { process first } loop
structure. It worked for a single sync thread, but was not reentrant and
triggered infinite loops when multiple syncers came along.
Instead, move inodes with dirty to a separate cap_dirty_migrating list
when in the limbo export-but-no-import state, allowing us to go back to
the simple loop structure (which was reentrant). This is cleaner and more
robust.
Audited the cap_dirty users and this looks fine:
list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we
have dirty caps (which list we're on is irrelevant) and list_del_init()
calls still do the right thing.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we get the inode from the MDS, we have a reference in req; don't do a
fresh lookup.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we are unable to locate an inode by ino, ask the MDS using the new
LOOKUPINO command.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Since we pass the nofail arg, we should never get an error; BUG if we do.
(And fix the function to not return an error if __map_request fails.)
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
rc is only ever 0 or negative in this method.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Both off and fi->offset are unsigned, so the difference is always >= 0.
Compare them directly instead of the sign of the difference.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we grab new_cap, retake the lock, and find we already have a cap now
for the given mds, release new_cap.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We allocate a buffer for rstats if the dirstat option is enabled. Use
snprintf.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We put ourselves on an inode list for the parent directory of metadata
operations so that an fsync on the directory will wait for metadata updates
to commit to disk. We weren't holding a reference to that directory,
however, and under certain workloads (fsstress in this case) the directory
can go away.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.
This bug can be reproduced occasionally by running blogbench.
Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The mds session, s, could be freed during ceph_put_mds_session.
Move dout before ceph_put_mds_session.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
See 0444d76ae64fffc7851797fc1b6ebdbb44ac504a.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
Fix common misspellings
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: Create a new key type "ceph".
libceph: Get secret from the kernel keys api when mounting with key=NAME.
ceph: Move secret key parsing earlier.
libceph: fix null dereference when unregistering linger requests
ceph: unlock on error in ceph_osdc_start_request()
ceph: fix possible NULL pointer dereference
ceph: flush msgr_wq during mds_client shutdown
|
|
This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥
If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client. This fixes
an oops easily triggered under UML by
while true ; do mount ... ; umount ... ; done
Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out. This bug is basically an artifact of the ceph ->
ceph+libceph conversion.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Just for consistency's sake. Fix obsolete comment too.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This fixes the list corruption warning like this:
------------[ cut here ]------------
WARNING: at lib/list_debug.c:30 __list_add+0x68/0x81()
Hardware name: X8DTU
list_add corruption. prev->next should be next (ffff880618931250), but was (null). (prev=ffff880c188b9130).
Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs ceph libceph libcrc32c sunrpc ipv6 fuse igb i2c_i801 ioatdma i2c_core iTCO_wdt iTCO_vendor_support joydev dca serio_raw usb_storage [last unloaded: scsi_wait_scan]
Pid: 10977, comm: smbd Tainted: G W 2.6.32.23-170.Elaster.xendom0.fc12.x86_64 #1
Call Trace:
[<ffffffff8105753c>] warn_slowpath_common+0x7c/0x94
[<ffffffff810575ab>] warn_slowpath_fmt+0x41/0x43
[<ffffffff812351a3>] __list_add+0x68/0x81
[<ffffffffa014799d>] ceph_aio_write+0x614/0x8a2 [ceph]
[<ffffffff8111d2a0>] do_sync_write+0xe8/0x125
[<ffffffff81075a1f>] ? autoremove_wake_function+0x0/0x39
[<ffffffff811f21ec>] ? selinux_file_permission+0x5c/0xb3
[<ffffffff811e8521>] ? security_file_permission+0x16/0x18
[<ffffffff8111d864>] vfs_write+0xae/0x10b
[<ffffffff8111d91b>] sys_pwrite64+0x5a/0x76
[<ffffffff81012d32>] system_call_fastpath+0x16/0x1b
---[ end trace 08573eb9f07ff6f4 ]---
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The ino32 mount option forces the ceph fs to report 32 bit
ino values. This is useful for 64 bit kernels with 32 bit userspace.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
|
|
Whoops!
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
d_move puts the renamed dentry at the end of d_subdirs, screwing with our
cached dentry directory offsets. We were just clearing I_COMPLETE to avoid
any possibility of trouble. However, assigning the renamed dentry an
offset at the end of the directory (to match it's new d_subdirs position)
is sufficient to maintain correct behavior and hold onto I_COMPLETE.
This is especially important for workloads like rsync, which renames files
into place. Before, we would lose I_COMPLETE and do MDS lookups for each
file. With this patch we only talk to the MDS on create and rename.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
can't blindly check nd->flags in ->d_revalidate()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Otherwise you can do things like
# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
First, this was racy anyway: d_release isn't called until well after the
dentry is unhashed. Second, this runs afoul of the recent dcache change
that clears d_parent prior to calling d_release (949854d0), causing a NULL
pointer dereference.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Do not set the I_COMPLETE flag on directories until we resolve races with
dcache pruning.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This reverts commit 97d79b403ef03f729883246208ef5d8a2ebc4d68.
This fails to account for d_parent changes due to rename or disconnected
dentries due to submounts or NFS reexports.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: keep reference to parent inode on ceph_dentry
ceph: queue cap_snaps once per realm
libceph: fix socket write error handling
libceph: fix socket read error handling
|
|
When creating a new dentry we now hold a reference to the parent
inode in the ceph_dentry. This is required due to the new RCU
changes from 949854d0, which set dentry->d_parent to NULL in d_kill before
calling the ->release() callback. If/when that behavior is changed, we can
revert this hack.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We were forming a dirty list, and then queueing cap_snaps for each realm
_and_ its children, regardless of whether the children were already in the
dirty list. This meant we did it twice for some realms. Which in turn
meant we corrupted mdsc->snap_flush_list when the cap_snap was re-added to
the list it was already on, and could trigger an infinite loop.
We were also using recursion to do reach all the children, a no-no when
stack is limited.
Instead, (re)queue any children on the dirty list, avoiding processing
anything twice and avoiding any recursion.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid picking MDS that is not active
ceph: avoid immediate cap check after import
ceph: fix flushing of caps vs cap import
ceph: fix erroneous cap flush to non-auth mds
ceph: fix cap_wanted_delay_{min,max} mount option initialization
ceph: fix xattr rbtree search
ceph: fix getattr on directory when using norbytes
|
|
Ignore replication or auth frag data if it indicates an MDS that is not
active. This can happen if the MDS shuts down and the client has stale
data about the namespace distribution across the MDS cluster. If that's
the case, fall back to directing the request based on the auth cap (which
should always be accurate).
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The NODELAY flag avoids the heuristics that delay cap (issued/wanted)
release. There's no reason for that after we import a cap, and it kills
whatever benefit we get from those delays.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we are mid-flush and a cap is migrated to another node, we need to
resend the cap flush message to the new MDS, and do so with the original
flush_seq to avoid leaking across a sync boundary. Previously we didn't
redo the flush (we only flushed newly dirty data), which would cause a
later sync to hang forever.
Signed-off-by: Sage Weil <sage@newdream.net>
|