summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2019-05-31btrfs: Don't panic when we can't find a root keyQu Wenruo
[ Upstream commit 7ac1e464c4d473b517bb784f30d40da1f842482e ] When we failed to find a root key in btrfs_update_root(), we just panic. That's definitely not cool, fix it by outputting an unique error message, aborting current transaction and return -EUCLEAN. This should not normally happen as the root has been used by the callers in some way. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31btrfs: fix panic during relocation after ENOSPC before writeback happensJosef Bacik
[ Upstream commit ff612ba7849964b1898fd3ccd1f56941129c6aab ] We've been seeing the following sporadically throughout our fleet panic: kernel BUG at fs/btrfs/relocation.c:4584! netversion: 5.0-0 Backtrace: #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c #2 [ffffc90003adb988] crash_kexec at ffffffff811048ad #3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a #4 [ffffc90003adb9c0] do_trap at ffffffff81019114 #5 [ffffc90003adba00] do_error_trap at ffffffff810195d0 #6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b [exception RIP: btrfs_reloc_cow_block+692] RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246 RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690 RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0 RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000 R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0 R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd #8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3 #9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c The way relocation moves data extents is by creating a reloc inode and preallocating extents in this inode and then copying the data into these preallocated extents. Once we've done this for all of our extents, we'll write out these dirty pages, which marks the extent written, and goes into btrfs_reloc_cow_block(). From here we get our current reloc_control, which _should_ match the reloc_control for the current block group we're relocating. However if we get an ENOSPC in this path at some point we'll bail out, never initiating writeback on this inode. Not a huge deal, unless we happen to be doing relocation on a different block group, and this block group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in btrfs_reloc_cow_block(), because we expect to be done modifying the data inode. We are in fact done modifying the metadata for the data inode we're currently using, but not the one from the failed block group, and thus we BUG_ON(). (This happens when writeback finishes for extents from the previous group, when we are at btrfs_finish_ordered_io() which updates the data reloc tree (inode item, drops/adds extent items, etc).) Fix this by writing out the reloc data inode always, and then breaking out of the loop after that point to keep from tripping this BUG_ON() later. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ add note from Filipe ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota ↵Robbie Ko
reserve [ Upstream commit 39ad317315887c2cb9a4347a93a8859326ddf136 ] When doing fallocate, we first add the range to the reserve_list and then reserve the quota. If quota reservation fails, we'll release all reserved parts of reserve_list. However, cur_offset is not updated to indicate that this range is already been inserted into the list. Therefore, the same range is freed twice. Once at list_for_each_entry loop, and once at the end of the function. This will result in WARN_ON on bytes_may_use when we free the remaining space. At the end, under the 'out' label we have a call to: btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset); The start offset, third argument, should be cur_offset. Everything from alloc_start to cur_offset was freed by the list_for_each_entry_safe_loop. Fixes: 18513091af94 ("btrfs: update btrfs_space_info's bytes_may_use timely") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Robbie Ko <robbieko@synology.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31gfs2: Fix occasional glock use-after-freeAndreas Gruenbacher
[ Upstream commit 9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ] This patch has to do with the life cycle of glocks and buffers. When gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata object is assigned to track the buffer, and that is queued to various lists, including the glock's gl_ail_list to indicate it's on the active items list. Once the page associated with the buffer has been written, it is removed from the ail list, but its life isn't over until a revoke has been successfully written. So after the block is written, its bufdata object is moved from the glock's gl_ail_list to a file-system-wide list of pending revokes, sd_log_le_revoke. At that point the glock still needs to track how many revokes it contributed to that list (in gl_revokes) so that things like glock go_sync can ensure all the metadata has been not only written, but also revoked before the glock is granted to a different node. This is to guarantee journal replay doesn't replay the block once the glock has been granted to another node. Ross Lagerwall recently discovered a race in which an inode could be evicted, and its glock freed after its ail list had been synced, but while it still had unwritten revokes on the sd_log_le_revoke list. The evict decremented the glock reference count to zero, which allowed the glock to be freed. After the revoke was written, function revoke_lo_after_commit tried to adjust the glock's gl_revokes counter and clear its GLF_LFLUSH flag, at which time it referenced the freed glock. This patch fixes the problem by incrementing the glock reference count in gfs2_add_revoke when the glock's first bufdata object is moved from the glock to the global revokes list. Later, when the glock's last such bufdata object is freed, the reference count is decremented. This guarantees that whichever process finishes last (the revoke writing or the evict) will properly free the glock, and neither will reference the glock after it has been freed. Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31NFS: make nfs_match_client killableRoberto Bergantinos Corpas
[ Upstream commit 950a578c6128c2886e295b9c7ecb0b6b22fcc92b ] Actually we don't do anything with return value from nfs_wait_client_init_complete in nfs_match_client, as a consequence if we get a fatal signal and client is not fully initialised, we'll loop to "again" label This has been proven to cause soft lockups on some scenarios (no-carrier but configured network interfaces) Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31gfs2: Fix lru_count going negativeRoss Lagerwall
[ Upstream commit 7881ef3f33bb80f459ea6020d1e021fc524a6348 ] Under certain conditions, lru_count may drop below zero resulting in a large amount of log spam like this: vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \ negative objects to delete nr=-1 This happens as follows: 1) A glock is moved from lru_list to the dispose list and lru_count is decremented. 2) The dispose function calls cond_resched() and drops the lru lock. 3) Another thread takes the lru lock and tries to add the same glock to lru_list, checking if the glock is on an lru list. 4) It is on a list (actually the dispose list) and so it avoids incrementing lru_count. 5) The glock is moved to lru_list. 5) The original thread doesn't dispose it because it has been re-added to the lru list but the lru_count has still decreased by one. Fix by checking if the LRU flag is set on the glock rather than checking if the glock is on some list and rearrange the code so that the LRU flag is added/removed precisely when the glock is added/removed from lru_list. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31Revert "btrfs: Honour FITRIM range constraints during free space trim"David Sterba
This reverts commit b327ff8a9b5767ce39db650d468fb124b48974a5. There is currently no corresponding patch in master due to additional changes that would be significantly different from plain revert in the respective stable branch. The range argument was not handled correctly and could cause trim to overlap allocated areas or reach beyond the end of the device. The address space that fitrim normally operates on is in logical coordinates, while the discards are done on the physical device extents. This distinction cannot be made with the current ioctl interface and caused the confusion. The bug depends on the layout of block groups and does not always happen. The whole-fs trim (run by default by the fstrim tool) is not affected. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31btrfs: honor path->skip_locking in backref codeJosef Bacik
commit 38e3eebff643db725633657d1d87a3be019d1018 upstream. Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] [ backport to linux-4.19.y branch, solve minor conflicts ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31hugetlb: use same fault hash key for shared and private mappingsMike Kravetz
commit 1b426bac66e6cc83c9f2d92b96e4e72acf43419a upstream. hugetlb uses a fault mutex hash table to prevent page faults of the same pages concurrently. The key for shared and private mappings is different. Shared keys off address_space and file index. Private keys off mm and virtual address. Consider a private mappings of a populated hugetlbfs file. A fault will map the page from the file and if needed do a COW to map a writable page. Hugetlbfs hole punch uses the fault mutex to prevent mappings of file pages. It uses the address_space file index key. However, private mappings will use a different key and could race with this code to map the file page. This causes problems (BUG) for the page cache remove code as it expects the page to be unmapped. A sample stack is: page dumped because: VM_BUG_ON_PAGE(page_mapped(page)) kernel BUG at mm/filemap.c:169! ... RIP: 0010:unaccount_page_cache_page+0x1b8/0x200 ... Call Trace: __delete_from_page_cache+0x39/0x220 delete_from_page_cache+0x45/0x70 remove_inode_hugepages+0x13c/0x380 ? __add_to_page_cache_locked+0x162/0x380 hugetlbfs_fallocate+0x403/0x540 ? _cond_resched+0x15/0x30 ? __inode_security_revalidate+0x5d/0x70 ? selinux_file_permission+0x100/0x130 vfs_fallocate+0x13f/0x270 ksys_fallocate+0x3c/0x80 __x64_sys_fallocate+0x1a/0x20 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There seems to be another potential COW issue/race with this approach of different private and shared keys as noted in commit 8382d914ebf7 ("mm, hugetlb: improve page-fault scalability"). Since every hugetlb mapping (even anon and private) is actually a file mapping, just use the address_space index key for all mappings. This results in potentially more hash collisions. However, this should not be the common case. Link: http://lkml.kernel.org/r/20190328234704.27083-3-mike.kravetz@oracle.com Link: http://lkml.kernel.org/r/20190412165235.t4sscoujczfhuiyt@linux-r8p5 Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31btrfs: sysfs: don't leak memory when failing add fsidTobin C. Harding
commit e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream. A failed call to kobject_init_and_add() must be followed by a call to kobject_put(). Currently in the error path when adding fs_devices we are missing this call. This could be fixed by calling btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid(). Here we choose the second option because it prevents the slightly unusual error path handling requirements of kobject from leaking out into btrfs functions. Add a call to kobject_put() in the error path of kobject_add_and_init(). This causes the release method to be called if kobject_init_and_add() fails. open_tree() is the function that calls btrfs_sysfs_add_fsid() and the error code in this function is already written with the assumption that the release method is called during the error path of open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the fail_fsdev_sysfs label). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tobin C. Harding <tobin@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31btrfs: sysfs: Fix error path kobject memory leakTobin C. Harding
commit 450ff8348808a89cc27436771aa05c2b90c0eef1 upstream. If a call to kobject_init_and_add() fails we must call kobject_put() otherwise we leak memory. Calling kobject_put() when kobject_init_and_add() fails drops the refcount back to 0 and calls the ktype release method (which in turn calls the percpu destroy and kfree). Add call to kobject_put() in the error path of call to kobject_init_and_add(). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tobin C. Harding <tobin@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31Btrfs: fix race between ranged fsync and writeback of adjacent rangesFilipe Manana
commit 0c713cbab6200b0ab6473b50435e450a6e1de85d upstream. When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the inode) that happens to be ranged, which happens during a msync() or writes for files opened with O_SYNC for example, we can end up with a corrupt log, due to different file extent items representing ranges that overlap with each other, or hit some assertion failures. When doing a ranged fsync we only flush delalloc and wait for ordered exents within that range. If while we are logging items from our inode ordered extents for adjacent ranges complete, we end up in a race that can make us insert the file extent items that overlap with others we logged previously and the assertion failures. For example, if tree-log.c:copy_items() receives a leaf that has the following file extents items, all with a length of 4K and therefore there is an implicit hole in the range 68K to 72K - 1: (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ... It copies them to the log tree. However due to the need to detect implicit holes, it may release the path, in order to look at the previous leaf to detect an implicit hole, and then later it will search again in the tree for the first file extent item key, with the goal of locking again the leaf (which might have changed due to concurrent changes to other inodes). However when it locks again the leaf containing the first key, the key corresponding to the extent at offset 72K may not be there anymore since there is an ordered extent for that range that is finishing (that is, somewhere in the middle of btrfs_finish_ordered_io()), and it just removed the file extent item but has not yet replaced it with a new file extent item, so the part of copy_items() that does hole detection will decide that there is a hole in the range starting from 68K to 76K - 1, and therefore insert a file extent item to represent that hole, having a key offset of 68K. After that we now have a log tree with 2 different extent items that have overlapping ranges: 1) The file extent item copied before copy_items() released the path, which has a key offset of 72K and a length of 4K, representing the file range 72K to 76K - 1. 2) And a file extent item representing a hole that has a key offset of 68K and a length of 8K, representing the range 68K to 76K - 1. This item was inserted after releasing the path, and overlaps with the extent item inserted before. The overlapping extent items can cause all sorts of unpredictable and incorrect behaviour, either when replayed or if a fast (non full) fsync happens later, which can trigger a BUG_ON() when calling btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a trace like the following: [61666.783269] ------------[ cut here ]------------ [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182! [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP (...) [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000 [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs] [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246 [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000 [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937 [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000 [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418 [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000 [61666.786253] FS: 00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000 [61666.786253] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0 [61666.786253] Call Trace: [61666.786253] __btrfs_drop_extents+0x5e3/0xaad [btrfs] [61666.786253] ? time_hardirqs_on+0x9/0x14 [61666.786253] btrfs_log_changed_extents+0x294/0x4e0 [btrfs] [61666.786253] ? release_extent_buffer+0x38/0xb4 [btrfs] [61666.786253] btrfs_log_inode+0xb6e/0xcdc [btrfs] [61666.786253] ? lock_acquire+0x131/0x1c5 [61666.786253] ? btrfs_log_inode_parent+0xee/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs] [61666.786253] btrfs_log_inode_parent+0x223/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? lockref_get_not_zero+0x2c/0x34 [61666.786253] ? rcu_read_unlock+0x3e/0x5d [61666.786253] btrfs_log_dentry_safe+0x60/0x7b [btrfs] [61666.786253] btrfs_sync_file+0x317/0x42c [btrfs] [61666.786253] vfs_fsync_range+0x8c/0x9e [61666.786253] SyS_msync+0x13c/0x1c9 [61666.786253] entry_SYSCALL_64_fastpath+0x18/0xad A sample of a corrupt log tree leaf with overlapping extents I got from running btrfs/072: item 14 key (295 108 200704) itemoff 2599 itemsize 53 extent data disk bytenr 0 nr 0 extent data offset 0 nr 458752 ram 458752 item 15 key (295 108 659456) itemoff 2546 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 606208 nr 163840 ram 770048 item 16 key (295 108 663552) itemoff 2493 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 610304 nr 155648 ram 770048 item 17 key (295 108 819200) itemoff 2440 itemsize 53 extent data disk bytenr 4334788608 nr 4096 extent data offset 0 nr 4096 ram 4096 The file extent item at offset 659456 (item 15) ends at offset 823296 (659456 + 163840) while the next file extent item (item 16) starts at offset 663552. Another different problem that the race can trigger is a failure in the assertions at tree-log.c:copy_items(), which expect that the first file extent item key we found before releasing the path exists after we have released path and that the last key we found before releasing the path also exists after releasing the path: $ cat -n fs/btrfs/tree-log.c 4080 if (need_find_last_extent) { 4081 /* btrfs_prev_leaf could return 1 without releasing the path */ 4082 btrfs_release_path(src_path); 4083 ret = btrfs_search_slot(NULL, inode->root, &first_key, 4084 src_path, 0, 0); 4085 if (ret < 0) 4086 return ret; 4087 ASSERT(ret == 0); (...) 4103 if (i >= btrfs_header_nritems(src_path->nodes[0])) { 4104 ret = btrfs_next_leaf(inode->root, src_path); 4105 if (ret < 0) 4106 return ret; 4107 ASSERT(ret == 0); 4108 src = src_path->nodes[0]; 4109 i = 0; 4110 need_find_last_extent = true; 4111 } (...) The second assertion implicitly expects that the last key before the path release still exists, because the surrounding while loop only stops after we have found that key. When this assertion fails it produces a stack like this: [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107 [139590.037406] ------------[ cut here ]------------ [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546! [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G W 5.0.0-btrfs-next-46 #1 (...) [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs] (...) [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282 [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000 [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868 [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000 [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013 [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001 [139590.042501] FS: 00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000 [139590.042847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0 [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [139590.044250] Call Trace: [139590.044631] copy_items+0xa3f/0x1000 [btrfs] [139590.045009] ? generic_bin_search.constprop.32+0x61/0x200 [btrfs] [139590.045396] btrfs_log_inode+0x7b3/0xd70 [btrfs] [139590.045773] btrfs_log_inode_parent+0x2b3/0xce0 [btrfs] [139590.046143] ? do_raw_spin_unlock+0x49/0xc0 [139590.046510] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [139590.046872] btrfs_sync_file+0x3b6/0x440 [btrfs] [139590.047243] btrfs_file_write_iter+0x45b/0x5c0 [btrfs] [139590.047592] __vfs_write+0x129/0x1c0 [139590.047932] vfs_write+0xc2/0x1b0 [139590.048270] ksys_write+0x55/0xc0 [139590.048608] do_syscall_64+0x60/0x1b0 [139590.048946] entry_SYSCALL_64_after_hwframe+0x49/0xbe [139590.049287] RIP: 0033:0x7f2efc4be190 (...) [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190 [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003 [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60 [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003 [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000 (...) [139590.055128] ---[ end trace 193f35d0215cdeeb ]--- So fix this race between a full ranged fsync and writeback of adjacent ranges by flushing all delalloc and waiting for all ordered extents to complete before logging the inode. This is the simplest way to solve the problem because currently the full fsync path does not deal with ranges at all (it assumes a full range from 0 to LLONG_MAX) and it always needs to look at adjacent ranges for hole detection. For use cases of ranged fsyncs this can make a few fsyncs slower but on the other hand it can make some following fsyncs to other ranges do less work or no need to do anything at all. A full fsync is rare anyway and happens only once after loading/creating an inode and once after less common operations such as a shrinking truncate. This is an issue that exists for a long time, and was often triggered by generic/127, because it does mmap'ed writes and msync (which triggers a ranged fsync). Adding support for the tree checker to detect overlapping extents (next patch in the series) and trigger a WARN() when such cases are found, and then calling btrfs_check_leaf_full() at the end of btrfs_insert_file_extent() made the issue much easier to detect. Running btrfs/072 with that change to the tree checker and making fsstress open files always with O_SYNC made it much easier to trigger the issue (as triggering it with generic/127 is very rare). CC: stable@vger.kernel.org # 3.16+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31Btrfs: avoid fallback to transaction commit during fsync of files with holesFilipe Manana
commit ebb929060aeb162417b4c1307e63daee47b208d9 upstream. When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a file that has holes and has file extent items spanning two or more leafs, we can end up falling to back to a full transaction commit due to a logic bug that leads to failure to insert a duplicate file extent item that is meant to represent a hole between the last file extent item of a leaf and the first file extent item in the next leaf. The failure (EEXIST error) leads to a transaction commit (as most errors when logging an inode do). For example, we have the two following leafs: Leaf N: ----------------------------------------------- | ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) | ----------------------------------------------- The file extent item at the end of leaf N has a length of 4Kb, representing the file range from 64K to 68K - 1. Leaf N + 1: ----------------------------------------------- | (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... | ----------------------------------------------- The file extent item at the first slot of leaf N + 1 has a length of 4Kb too, representing the file range from 72K to 76K - 1. During the full fsync path, when we are at tree-log.c:copy_items() with leaf N as a parameter, after processing the last file extent item, that represents the extent at offset 64K, we take a look at the first file extent item at the next leaf (leaf N + 1), and notice there's a 4K hole between the two extents, and therefore we insert a file extent item representing that hole, starting at file offset 68K and ending at offset 72K - 1. However we don't update the value of *last_extent, which is used to represent the end offset (plus 1, non-inclusive end) of the last file extent item inserted in the log, so it stays with a value of 68K and not with a value of 72K. Then, when copy_items() is called for leaf N + 1, because the value of *last_extent is smaller then the offset of the first extent item in the leaf (68K < 72K), we look at the last file extent item in the previous leaf (leaf N) and see it there's a 4K gap between it and our first file extent item (again, 68K < 72K), so we decide to insert a file extent item representing the hole, starting at file offset 68K and ending at offset 72K - 1, this insertion will fail with -EEXIST being returned from btrfs_insert_file_extent() because we already inserted a file extent item representing a hole for this offset (68K) in the previous call to copy_items(), when processing leaf N. The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(), which falls back to a full transaction commit. Fix this by adjusting *last_extent after inserting a hole when we had to look at the next leaf. Fixes: 4ee3fad34a9c ("Btrfs: fix fsync after hole punching when using no-holes feature") Cc: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31Btrfs: do not abort transaction at btrfs_update_root() after failure to COW pathFilipe Manana
commit 72bd2323ec87722c115a5906bc6a1b31d11e8f54 upstream. Currently when we fail to COW a path at btrfs_update_root() we end up always aborting the transaction. However all the current callers of btrfs_update_root() are able to deal with errors returned from it, many do end up aborting the transaction themselves (directly or not, such as the transaction commit path), other BUG_ON() or just gracefully cancel whatever they were doing. When syncing the fsync log, we call btrfs_update_root() through tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log sync code does not abort the transaction, instead it gracefully handles the error and returns -EAGAIN to the fsync handler, so that it falls back to a transaction commit. Any other error different from -ENOSPC, makes the log sync code abort the transaction. So remove the transaction abort from btrfs_update_log() when we fail to COW a path to update the root item, so that if an -ENOSPC failure happens we avoid aborting the current transaction and have a chance of the fsync succeeding after falling back to a transaction commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413 Fixes: 79787eaab46121 ("btrfs: replace many BUG_ONs with proper error handling") Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31gfs2: Fix sign extension bug in gfs2_update_statsAndreas Gruenbacher
commit 5a5ec83d6ac974b12085cd99b196795f14079037 upstream. Commit 4d207133e9c3 changed the types of the statistic values in struct gfs2_lkstats from s64 to u64. Because of that, what should be a signed value in gfs2_update_stats turned into an unsigned value. When shifted right, we end up with a large positive value instead of a small negative value, which results in an incorrect variance estimate. Fixes: 4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31f2fs: Fix use of number of devicesDamien Le Moal
commit 0916878da355650d7e77104a7ac0fa1784eca852 upstream. For a single device mount using a zoned block device, the zone information for the device is stored in the sbi->devs single entry array and sbi->s_ndevs is set to 1. This differs from a single device mount using a regular block device which does not allocate sbi->devs and sets sbi->s_ndevs to 0. However, sbi->s_devs == 0 condition is used throughout the code to differentiate a single device mount from a multi-device mount where sbi->s_ndevs is always larger than 1. This results in problems with single zoned block device volumes as these are treated as multi-device mounts but do not have the start_blk and end_blk information set. One of the problem observed is skipping of zone discard issuing resulting in write commands being issued to full zones or unaligned to a zone write pointer. Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single regular block device mount) and sbi->s_ndevs == 1 (single zoned block device mount) in the same manner. This is done by introducing the helper function f2fs_is_multi_device() and using this helper in place of direct tests of sbi->s_ndevs value, improving code readability. Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31ext4: do not delete unlinked inode from orphan list on failed truncateJan Kara
commit ee0ed02ca93ef1ecf8963ad96638795d55af2c14 upstream. It is possible that unlinked inode enters ext4_setattr() (e.g. if somebody calls ftruncate(2) on unlinked but still open file). In such case we should not delete the inode from the orphan list if truncate fails. Note that this is mostly a theoretical concern as filesystem is corrupted if we reach this path anyway but let's be consistent in our orphan handling. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25btrfs: Honour FITRIM range constraints during free space trimNikolay Borisov
commit c2d1b3aae33605a61cbab445d8ae1c708ccd2698 upstream. Up until now trimming the freespace was done irrespective of what the arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments will be entirely ignored. Fix it by correctly handling those paramter. This requires breaking if the found freespace extent is after the end of the passed range as well as completing trim after trimming fstrim_range::len bytes. Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavourAl Viro
[ Upstream commit 4e9036042fedaffcd868d7f7aa948756c48c637d ] To choose whether to pick the GID from the old (16bit) or new (32bit) field, we should check if the old gid field is set to 0xffff. Mainline checks the old *UID* field instead - cut'n'paste from the corresponding code in ufs_get_inode_uid(). Fixes: 252e211e90ce Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25ceph: flush dirty inodes before proceeding with remountJeff Layton
commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream. xfstest generic/452 was triggering a "Busy inodes after umount" warning. ceph was allowing the mount to go read-only without first flushing out dirty inodes in the cache. Ensure we sync out the filesystem before allowing a remount to proceed. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/39571 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25fuse: honor RLIMIT_FSIZE in fuse_file_fallocateLiu Bo
commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream. fstests generic/228 reported this failure that fuse fallocate does not honor what 'ulimit -f' has set. This adds the necessary inode_newsize_ok() check. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Fixes: 05ba1f082300 ("fuse: add FALLOCATE operation") Cc: <stable@vger.kernel.org> # v3.5 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25fuse: fix writepages on 32bitMiklos Szeredi
commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream. Writepage requests were cropped to i_size & 0xffffffff, which meant that mmaped writes to any file larger than 4G might be silently discarded. Fix by storing the file size in a properly sized variable (loff_t instead of size_t). Reported-by: Antonio SJ Musumeci <trapexit@spawn.link> Fixes: 6eaf4782eb09 ("fuse: writepages: crop secondary requests") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25PNFS fallback to MDS if no deviceid foundOlga Kornievskaia
commit b1029c9bc078a6f1515f55dd993b507dcc7e3440 upstream. If we fail to find a good deviceid while trying to pnfs instead of propogating an error back fallback to doing IO to the MDS. Currently, code with fals the IO with EINVAL. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 8d40b0f14846f ("NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes" Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25NFS4: Fix v4.0 client state corruption when mountZhangXiaoxu
commit f02f3755dbd14fb935d24b14650fff9ba92243b8 upstream. stat command with soft mount never return after server is stopped. When alloc a new client, the state of the client will be set to NFS4CLNT_LEASE_EXPIRED. When the server is stopped, the state manager will work, and accord the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it will drain the slot table and lead other task to wait queue, until the client recovered. Then the stat command is hung. When discover server trunking, the client will renew the lease, but check the client state, it lead the client state corruption. So, we need to call state manager to recover it when detect server ip trunking. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25Revert "cifs: fix memory leak in SMB2_read"Greg Kroah-Hartman
This reverts commit c54a881d793e3eea2a1b1460c5778b22128821ea which is commit 05fd5c2c61732152a6bddc318aae62d7e436629b upstream. Lars writes: This patch should not be in 4.14-stable because 088aaf17aa79300cab14dbee2569c58cfafd7d6e was for 4.18+. Now we have a double-free crash in SMB2_read because there are 2 calls to cifs_small_buf_release in the error path. It was a mistake to backport it this far, so let's revert it. Reported-by: Lars Persson <lists@bofh.nu> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Pavel Shilovsky <pshilov@microsoft.com> Cc: Steve French <stfrench@microsoft.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level()Christoph Probst
commit 6a54b2e002c9d00b398d35724c79f9fe0d9b38fb upstream. Change strcat to strncpy in the "None" case to fix a buffer overflow when cinode->oplock is reset to 0 by another thread accessing the same cinode. It is never valid to append "None" to any other message. Consolidate multiple writes to cinode->oplock to reduce raciness. Signed-off-by: Christoph Probst <kernel@probst.it> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: fix compile error when using BUFFER_TRACEzhangyi (F)
commit ddccb6dbe780d68133191477571cb7c69e17bb8c upstream. Fix compile error below when using BUFFER_TRACE. fs/ext4/inode.c: In function ‘ext4_expand_extra_isize’: fs/ext4/inode.c:5979:19: error: request for member ‘bh’ in something not a structure or union BUFFER_TRACE(iloc.bh, "get_write_access"); Fixes: c03b45b853f58 ("ext4, project: expand inode extra size if possible") Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: fix use-after-free in dx_release()Sahitya Tummala
commit 08fc98a4d6424af66eb3ac4e2cedd2fc927ed436 upstream. The buffer_head (frames[0].bh) and it's corresping page can be potentially free'd once brelse() is done inside the for loop but before the for loop exits in dx_release(). It can be free'd in another context, when the page cache is flushed via drop_caches_sysctl_handler(). This results into below data abort when accessing info->indirect_levels in dx_release(). Unable to handle kernel paging request at virtual address ffffffc17ac3e01e Call trace: dx_release+0x70/0x90 ext4_htree_fill_tree+0x2d4/0x300 ext4_readdir+0x244/0x6f8 iterate_dir+0xbc/0x160 SyS_getdents64+0x94/0x174 Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: fix data corruption caused by overlapping unaligned and aligned IOLukas Czerner
commit 57a0da28ced8707cb9f79f071a016b9d005caf5a upstream. Unaligned AIO must be serialized because the zeroing of partial blocks of unaligned AIO can result in data corruption in case it's overlapping another in flight IO. Currently we wait for all unwritten extents before we submit unaligned AIO which protects data in case of unaligned AIO is following overlapping IO. However if a unaligned AIO is followed by overlapping aligned AIO we can still end up corrupting data. To fix this, we must make sure that the unaligned AIO is the only IO in flight by waiting for unwritten extents conversion not just before the IO submission, but right after it as well. This problem can be reproduced by xfstest generic/538 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: zero out the unused memory region in the extent tree blockSriram Rajagopalan
commit 592acbf16821288ecdc4192c47e3774a4c48bb64 upstream. This commit zeroes out the unused memory region in the buffer_head corresponding to the extent metablock after writing the extent header and the corresponding extent node entries. This is done to prevent random uninitialized data from getting into the filesystem when the extent block is synced. This fixes CVE-2019-11833. Signed-off-by: Sriram Rajagopalan <sriramr@arista.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going ↵Jiufei Xue
into workqueue when umount commit ec084de929e419e51bcdafaafe567d9e7d0273b7 upstream. synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 evict+0xb3/0x180 iput+0x1b0/0x230 inode_switch_wbs_work_fn+0x3c0/0x6a0 worker_thread+0x4e/0x490 ? process_one_work+0x410/0x410 kthread+0xe6/0x100 ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.com Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Suggested-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: fix ext4_show_options for file systems w/o journalDebabrata Banerjee
commit 50b29d8f033a7c88c5bc011abc2068b1691ab755 upstream. Instead of removing EXT4_MOUNT_JOURNAL_CHECKSUM from s_def_mount_opt as I assume was intended, all other options were blown away leading to _ext4_show_options() output being incorrect. Fixes: 1e381f60dad9 ("ext4: do not allow journal_opts for fs w/o journal") Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: actually request zeroing of inode table after growKirill Tkhai
commit 310a997fd74de778b9a4848a64be9cda9f18764a upstream. It is never possible, that number of block groups decreases, since only online grow is supported. But after a growing occured, we have to zero inode tables for just created new block groups. Fixes: 19c5246d2516 ("ext4: add new online resize interface") Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: fix use-after-free race with debug_want_extra_isizeBarret Rhoden
commit 7bc04c5c2cc467c5b40f2b03ba08da174a0d5fa7 upstream. When remounting with debug_want_extra_isize, we were not performing the same checks that we do during a normal mount. That allowed us to set a value for s_want_extra_isize that reached outside the s_inode_size. Fixes: e2b911c53584 ("ext4: clean up feature test macros with predicate functions") Reported-by: syzbot+f584efa0ac7213c226b7@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Barret Rhoden <brho@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21Btrfs: do not start a transaction at iterate_extent_inodes()Filipe Manana
commit bfc61c36260ca990937539cd648ede3cd749bc10 upstream. When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21Btrfs: do not start a transaction during fiemapFilipe Manana
commit 03628cdbc64db6262e50d0357960a4e9562676a1 upstream. During fiemap, for regular extents (non inline) we need to check if they are shared and if they are, set the shared bit. Checking if an extent is shared requires checking the delayed references of the currently running transaction, since some reference might have not yet hit the extent tree and be only in the in-memory delayed references. However we were using a transaction join for this, which creates a new transaction when there is no transaction currently running. That means that two more potential failures can happen: creating the transaction and committing it. Further, if no write activity is currently happening in the system, and fiemap calls keep being done, we end up creating and committing transactions that do nothing. In some extreme cases this can result in the commit of the transaction created by fiemap to fail with ENOSPC when updating the root item of a subvolume tree because a join does not reserve any space, leading to a trace like the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do a transaction join to avoid the overhead of creating a new transaction (if there is currently no running transaction) and introducing a potential point of failure when the new transaction gets committed, instead use a transaction attach to grab a handle for the currently running transaction if any. Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Fixes: afce772e87c36c ("btrfs: fix check_shared for fiemap ioctl") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: avoid drop reference to iloc.bh twicePan Bian
commit 8c380ab4b7b59c0c602743810be1b712514eaebc upstream. The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty. However, the reference is dropped again if error occurs during ext4_handle_dirty_metadata, which may result in use-after-free bugs. Fixes: fb265c9cb49e("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: ignore e_value_offs for xattrs with value-in-ea-inodeTheodore Ts'o
commit e5d01196c0428a206f307e9ee5f6842964098ff0 upstream. In other places in fs/ext4/xattr.c, if e_value_inum is non-zero, the code ignores the value in e_value_offs. The e_value_offs *should* be zero, but we shouldn't depend upon it, since it might not be true in a corrupted/fuzzed file system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202897 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202877 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ext4: make sanity check in mballoc more strictJan Kara
commit 31562b954b60f02acb91b7349dc6432d3f8c3c5f upstream. The sanity check in mb_find_extent() only checked that returned extent does not extend past blocksize * 8, however it should not extend past EXT4_CLUSTERS_PER_GROUP(sb). This can happen when clusters_per_group < blocksize * 8 and the tail of the bitmap is not properly filled by 1s which happened e.g. when ancient kernels have grown the filesystem. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21jbd2: check superblock mapped prior to committingJiufei Xue
commit 742b06b5628f2cd23cb51a034cb54dc33c6162c5 upstream. We hit a BUG at fs/buffer.c:3057 if we detached the nbd device before unmounting ext4 filesystem. The typical chain of events leading to the BUG: jbd2_write_superblock submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)); The block device is removed and all the pages are invalidated. JBD2 was trying to write journal superblock to the block device which is no longer present. Fix this by checking the journal superblock's buffer head prior to submitting. Reported-by: Eric Ren <renzhen@linux.alibaba.com> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21ocfs2: fix ocfs2 read inode data panic in ocfs2_igetShuning Zhang
commit e091eab028f9253eac5c04f9141bbc9d170acab3 upstream. In some cases, ocfs2_iget() reads the data of inode, which has been deleted for some reason. That will make the system panic. So We should judge whether this inode has been deleted, and tell the caller that the inode is a bad inode. For example, the ocfs2 is used as the backed of nfs, and the client is nfsv3. This issue can be reproduced by the following steps. on the nfs server side, ..../patha/pathb Step 1: The process A was scheduled before calling the function fh_verify. Step 2: The process B is removing the 'pathb', and just completed the call to function dput. Then the dentry of 'pathb' has been deleted from the dcache, and all ancestors have been deleted also. The relationship of dentry and inode was deleted through the function hlist_del_init. The following is the call stack. dentry_iput->hlist_del_init(&dentry->d_u.d_alias) At this time, the inode is still in the dcache. Step 3: The process A call the function ocfs2_get_dentry, which get the inode from dcache. Then the refcount of inode is 1. The following is the call stack. nfsd3_proc_getacl->fh_verify->exportfs_decode_fh->fh_to_dentry(ocfs2_get_dentry) Step 4: Dirty pages are flushed by bdi threads. So the inode of 'patha' is evicted, and this directory was deleted. But the inode of 'pathb' can't be evicted, because the refcount of the inode was 1. Step 5: The process A keep running, and call the function reconnect_path(in exportfs_decode_fh), which call function ocfs2_get_parent of ocfs2. Get the block number of parent directory(patha) by the name of ... Then read the data from disk by the block number. But this inode has been deleted, so the system panic. Process A Process B 1. in nfsd3_proc_getacl | 2. | dput 3. fh_to_dentry(ocfs2_get_dentry) | 4. bdi flush dirty cache | 5. ocfs2_iget | [283465.542049] OCFS2: ERROR (device sdp): ocfs2_validate_inode_block: Invalid dinode #580640: OCFS2_VALID_FL not set [283465.545490] Kernel panic - not syncing: OCFS2: (device sdp): panic forced after error [283465.546889] CPU: 5 PID: 12416 Comm: nfsd Tainted: G W 4.1.12-124.18.6.el6uek.bug28762940v3.x86_64 #2 [283465.548382] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/21/2015 [283465.549657] 0000000000000000 ffff8800a56fb7b8 ffffffff816e839c ffffffffa0514758 [283465.550392] 000000000008dc20 ffff8800a56fb838 ffffffff816e62d3 0000000000000008 [283465.551056] ffff880000000010 ffff8800a56fb848 ffff8800a56fb7e8 ffff88005df9f000 [283465.551710] Call Trace: [283465.552516] [<ffffffff816e839c>] dump_stack+0x63/0x81 [283465.553291] [<ffffffff816e62d3>] panic+0xcb/0x21b [283465.554037] [<ffffffffa04e66b0>] ocfs2_handle_error+0xf0/0xf0 [ocfs2] [283465.554882] [<ffffffffa04e7737>] __ocfs2_error+0x67/0x70 [ocfs2] [283465.555768] [<ffffffffa049c0f9>] ocfs2_validate_inode_block+0x229/0x230 [ocfs2] [283465.556683] [<ffffffffa047bcbc>] ocfs2_read_blocks+0x46c/0x7b0 [ocfs2] [283465.557408] [<ffffffffa049bed0>] ? ocfs2_inode_cache_io_unlock+0x20/0x20 [ocfs2] [283465.557973] [<ffffffffa049f0eb>] ocfs2_read_inode_block_full+0x3b/0x60 [ocfs2] [283465.558525] [<ffffffffa049f5ba>] ocfs2_iget+0x4aa/0x880 [ocfs2] [283465.559082] [<ffffffffa049146e>] ocfs2_get_parent+0x9e/0x220 [ocfs2] [283465.559622] [<ffffffff81297c05>] reconnect_path+0xb5/0x300 [283465.560156] [<ffffffff81297f46>] exportfs_decode_fh+0xf6/0x2b0 [283465.560708] [<ffffffffa062faf0>] ? nfsd_proc_getattr+0xa0/0xa0 [nfsd] [283465.561262] [<ffffffff810a8196>] ? prepare_creds+0x26/0x110 [283465.561932] [<ffffffffa0630860>] fh_verify+0x350/0x660 [nfsd] [283465.562862] [<ffffffffa0637804>] ? nfsd_cache_lookup+0x44/0x630 [nfsd] [283465.563697] [<ffffffffa063a8b9>] nfsd3_proc_getattr+0x69/0xf0 [nfsd] [283465.564510] [<ffffffffa062cf60>] nfsd_dispatch+0xe0/0x290 [nfsd] [283465.565358] [<ffffffffa05eb892>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc] [283465.566272] [<ffffffffa05ea652>] svc_process_common+0x412/0x6a0 [sunrpc] [283465.567155] [<ffffffffa05eaa03>] svc_process+0x123/0x210 [sunrpc] [283465.568020] [<ffffffffa062c90f>] nfsd+0xff/0x170 [nfsd] [283465.568962] [<ffffffffa062c810>] ? nfsd_destroy+0x80/0x80 [nfsd] [283465.570112] [<ffffffff810a622b>] kthread+0xcb/0xf0 [283465.571099] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 [283465.572114] [<ffffffff816f11b8>] ret_from_fork+0x58/0x90 [283465.573156] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 Link: http://lkml.kernel.org/r/1554185919-3010-1-git-send-email-sunny.s.zhang@oracle.com Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: piaojun <piaojun@huawei.com> Cc: "Gang He" <ghe@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16cifs: fix memory leak in SMB2_readRonnie Sahlberg
[ Upstream commit 05fd5c2c61732152a6bddc318aae62d7e436629b ] Commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e introduced a leak where if SMB2_read() returned an error we would return without freeing the request buffer. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
2019-05-16Btrfs: fix missing delayed iputs on unmountOmar Sandoval
[ Upstream commit d6fd0ae25c6495674dc5a41a8d16bc8e0073276d ] There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add trace ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
2019-05-16fuse: fix possibly missed wake-up after abortMiklos Szeredi
[ Upstream commit 2d84a2d19b6150c6dbac1e6ebad9c82e4c123772 ] In current fuse_drop_waiting() implementation it's possible that fuse_wait_aborted() will not be woken up in the unlikely case that fuse_abort_conn() + fuse_wait_aborted() runs in between checking fc->connected and calling atomic_dec(&fc->num_waiting). Do the atomic_dec_and_test() unconditionally, which also provides the necessary barrier against reordering with the fc->connected check. The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE barrier after resetting fc->connected. However, this is not a performance sensitive path, and adding the explicit barrier makes it easier to document. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Cc: <stable@vger.kernel.org> #v4.19 Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
2019-05-16kernfs: fix barrier usage in __kernfs_new_node()Andrea Parri
commit 998267900cee901c5d1dfa029a6304d00acbc29f upstream. smp_mb__before_atomic() can not be applied to atomic_set(). Remove the barrier and rely on RELEASE synchronization. Fixes: ba16b2846a8c6 ("kernfs: add an API to get kernfs node from inode number") Cc: stable@vger.kernel.org Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08hugetlbfs: fix memory leak for resv_mapMike Kravetz
[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ] When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Yufen Yu <yuyufen@huawei.com> Suggested-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-08debugfs: fix use-after-free on symlink traversalAl Viro
[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ] symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-08jffs2: fix use-after-free on symlink traversalAl Viro
[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-04ceph: fix use-after-free on symlink traversalAl Viro
[ Upstream commit daf5cc27eed99afdea8d96e71b89ba41f5406ef6 ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-04NFS: Fix a typo in nfs_init_timeout_values()Trond Myklebust
[ Upstream commit 5a698243930c441afccec04e4d5dc8febfd2b775 ] Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-03 05:50:25 +0000