summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2015-03-18GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()Andrew Elble
commit 278702074ff77b1a3fa2061267997095959f5e2c upstream. Fixes: e01580bf9e ("gfs2: use generic posix ACL infrastructure") Reported-by: Eric Meddaugh <etmsys@rit.edu> Tested-by: Eric Meddaugh <etmsys@rit.edu> Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18NFSv4: Don't call put_rpccred() under the rcu_read_lock()Trond Myklebust
commit 7c0af9ffb7bb4e5355470fa60b3eb711ddf226fa upstream. put_rpccred() can sleep. Fixes: 8f649c3762547 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18NFS: Don't invalidate a submounted dentry in nfs_prime_dcache()Trond Myklebust
commit 6c441c254eea2354d686be7f5544bcd79fb6a61f upstream. If we're traversing a directory which contains a submounted filesystem, or one that has a referral, the NFS server that is processing the READDIR request will often return information for the underlying (mounted-on) directory. It may, or may not, also return filehandle information. If this happens, and the lookup in nfs_prime_dcache() returns the dentry for the submounted directory, the filehandle comparison will fail, and we call d_invalidate(). Post-commit 8ed936b5671bf ("vfs: Lazily remove mounts on unlinked files and directories."), this means the entire subtree is unmounted. The following minimal patch addresses this problem by punting on the invalidation if there is a submount. Kudos to Neil Brown <neilb@suse.de> for having tracked down this issue (see link). Reported-by: Nix <nix@esperi.org.uk> Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nix Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18eCryptfs: don't pass fs-specific ioctl commands throughTyler Hicks
commit 6d65261a09adaa374c05de807f73a144d783669e upstream. eCryptfs can't be aware of what to expect when after passing an arbitrary ioctl command through to the lower filesystem. The ioctl command may trigger an action in the lower filesystem that is incompatible with eCryptfs. One specific example is when one attempts to use the Btrfs clone ioctl command when the source file is in the Btrfs filesystem that eCryptfs is mounted on top of and the destination fd is from a new file created in the eCryptfs mount. The ioctl syscall incorrectly returns success because the command is passed down to Btrfs which thinks that it was able to do the clone operation. However, the result is an empty eCryptfs file. This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl commands through and then copies up the inode metadata from the lower inode to the eCryptfs inode to catch any changes made to the lower inode's metadata. Those five ioctl commands are mostly common across all filesystems but the whitelist may need to be further pruned in the future. https://bugzilla.kernel.org/show_bug.cgi?id=93691 https://launchpad.net/bugs/1305335 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Cc: Rocko <rockorequin@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18nfsd: fix clp->cl_revoked list deletion causing softlock in nfsdAndrew Elble
commit c876486be17aeefe0da569f3d111cbd8de6f675d upstream. commit 2d4a532d385f ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") removed the use of the reaplist to clean out clp->cl_revoked. It failed to change list_entry() to walk clp->cl_revoked.next instead of reaplist.next Fixes: 2d4a532d385f ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") Reported-by: Eric Meddaugh <etmsys@rit.edu> Tested-by: Eric Meddaugh <etmsys@rit.edu> Signed-off-by: Andrew Elble <aweits@rit.edu> Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18nilfs2: fix potential memory overrun on inodeRyusuke Konishi
commit 957ed60b53b519064a54988c4e31e0087e47d091 upstream. Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18procfs: fix race between symlink removals and traversalsAl Viro
commit 7e0e953bb0cf649f93277ac8fb67ecbb7f7b04a9 upstream. use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18debugfs: leave freeing a symlink body until inode evictionAl Viro
commit 0db59e59299f0b67450c5db21f7f316c8fb04e84 upstream. As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18autofs4: Wrong format for printing dentryRasmus Villemoes
commit 76bf3f6b1d6ac4c770bb121b0461c460aa068e64 upstream. %pD for struct file*, %pd for struct dentry*. Fixes: a455589f181e ("assorted conversions to %p[dD]") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocationAl Viro
commit 0a280962dc6e117e0e4baa668453f753579265d9 upstream. X-Coverup: just ask spender Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref.Quentin Casasnovas
commit dd9ef135e3542ffc621c4eb7f0091870ec7a1504 upstream. Improper arithmetics when calculting the address of the extended ref could lead to an out of bounds memory read and kernel panic. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Btrfs: fix data loss in the fast fsync pathFilipe Manana
commit 3a8b36f378060d20062a0918e99fae39ff077bf0 upstream. When using the fast file fsync code path we can miss the fact that new writes happened since the last file fsync and therefore return without waiting for the IO to finish and write the new extents to the fsync log. Here's an example scenario where the fsync will miss the fact that new file data exists that wasn't yet durably persisted: 1. fs_info->last_trans_committed == N - 1 and current transaction is transaction N (fs_info->generation == N); 2. do a buffered write; 3. fsync our inode, this clears our inode's full sync flag, starts an ordered extent and waits for it to complete - when it completes at btrfs_finish_ordered_io(), the inode's last_trans is set to the value N (via btrfs_update_inode_fallback -> btrfs_update_inode -> btrfs_set_inode_last_trans); 4. transaction N is committed, so fs_info->last_trans_committed is now set to the value N and fs_info->generation remains with the value N; 5. do another buffered write, when this happens btrfs_file_write_iter sets our inode's last_trans to the value N + 1 (that is fs_info->generation + 1 == N + 1); 6. transaction N + 1 is started and fs_info->generation now has the value N + 1; 7. transaction N + 1 is committed, so fs_info->last_trans_committed is set to the value N + 1; 8. fsync our inode - because it doesn't have the full sync flag set, we only start the ordered extent, we don't wait for it to complete (only in a later phase) therefore its last_trans field has the value N + 1 set previously by btrfs_file_write_iter(), and so we have: inode->last_trans <= fs_info->last_trans_committed (N + 1) (N + 1) Which made us not log the last buffered write and exit the fsync handler immediately, returning success (0) to user space and resulting in data loss after a crash. This can actually be triggered deterministically and the following excerpt from a testcase I made for xfstests triggers the issue. It moves a dummy file across directories and then fsyncs the old parent directory - this is just to trigger a transaction commit, so moving files around isn't directly related to the issue but it was chosen because running 'sync' for example does more than just committing the current transaction, as it flushes/waits for all file data to be persisted. The issue can also happen at random periods, since the transaction kthread periodicaly commits the current transaction (about every 30 seconds by default). The body of the test is: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file 'foo', the one we check for data loss. # By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync' # bit from its flags (btrfs inode specific flags). $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \ -c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io # Now create one other file and 2 directories. We will move this second file # from one directory to the other later because it forces btrfs to commit its # currently open transaction if we fsync the old parent directory. This is # necessary to trigger the data loss bug that affected btrfs. mkdir $SCRATCH_MNT/testdir_1 touch $SCRATCH_MNT/testdir_1/bar mkdir $SCRATCH_MNT/testdir_2 # Make sure everything is durably persisted. sync # Write more 8Kb of data to our file. $XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io # Move our 'bar' file into a new directory. mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar # Fsync our first directory. Because it had a file moved into some other # directory, this made btrfs commit the currently open transaction. This is # a condition necessary to trigger the data loss bug. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1 # Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of # data we wrote previously to be persisted and available if a crash happens. # This did not happen with btrfs, because of the transaction commit that # happened when we fsynced the parent directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Now check that all data we wrote before are available. echo "File content after log replay:" od -t x1 $SCRATCH_MNT/foo status=0 exit The expected golden output for the test, which is what we get with this fix applied (or when running against ext3/4 and xfs), is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0040000 Without this fix applied, the output shows the test file does not have the second 8Kb extent that we successfully fsynced: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 So fix this by skipping the fsync only if we're doing a full sync and if the inode's last_trans is <= fs_info->last_trans_committed, or if the inode is already in the log. Also remove setting the inode's last_trans in btrfs_file_write_iter since it's useless/unreliable. Also because btrfs_file_write_iter no longer sets inode->last_trans to fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't bail out if last_trans is 0, otherwise something as simple as the following example wouldn't log the second write on the last fsync: 1. write to file 2. fsync file 3. fsync file |--> btrfs_inode_in_log() returns true and it set last_trans to 0 4. write to file |--> btrfs_file_write_iter() no longers sets last_trans, so it remained with a value of 0 5. fsync |--> inode->last_trans == 0, so it bails out without logging the second write A test case for xfstests will be sent soon. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18btrfs: fix lost return value due to variable shadowingDavid Sterba
commit 1932b7be973b554ffe20a5bba6ffaed6fa995cdc upstream. A block-local variable stores error code but btrfs_get_blocks_direct may not return it in the end as there's a ret defined in the function scope. Fixes: d187663ef24c ("Btrfs: lock extents as we map them in DIO") Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Btrfs: fix fsync race leading to ordered extent memory leaksFilipe Manana
commit 4d884fceaa2c838abb598778813e93f6d9fea723 upstream. We can have multiple fsync operations against the same file during the same transaction and they can collect the same ordered extents while they don't complete (still accessible from the inode's ordered tree). If this happens, those ordered extents will never get their reference counts decremented to 0, leading to memory leaks and inode leaks (an iput for an ordered extent's inode is scheduled only when the ordered extent's refcount drops to 0). The following sequence diagram explains this race: CPU 1 CPU 2 btrfs_sync_file() btrfs_sync_file() mutex_lock(inode->i_mutex) btrfs_log_inode() btrfs_get_logged_extents() --> collects ordered extent X --> increments ordered extent X's refcount btrfs_submit_logged_extents() mutex_unlock(inode->i_mutex) mutex_lock(inode->i_mutex) btrfs_sync_log() btrfs_wait_logged_extents() --> list_del_init(&ordered->log_list) btrfs_log_inode() btrfs_get_logged_extents() --> Adds ordered extent X to logged_list because at this point: list_empty(&ordered->log_list) && test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags) == 0 --> Increments ordered extent X's refcount --> check if ordered extent's io is finished or not, start it if necessary and wait for it to finish --> sets bit BTRFS_ORDERED_LOGGED on ordered extent X's flags and adds it to trans->ordered btrfs_sync_log() finishes btrfs_submit_logged_extents() btrfs_log_inode() finishes mutex_unlock(inode->i_mutex) btrfs_sync_file() finishes btrfs_sync_log() btrfs_wait_logged_extents() --> Sees ordered extent X has the bit BTRFS_ORDERED_LOGGED set in its flags --> X's refcount is untouched btrfs_sync_log() finishes btrfs_sync_file() finishes btrfs_commit_transaction() --> called by transaction kthread for e.g. btrfs_wait_pending_ordered() --> waits for ordered extent X to complete --> decrements ordered extent X's refcount by 1 only, corresponding to the increment done by the fsync task ran by CPU 1 In the scenario of the above diagram, after the transaction commit, the ordered extent will remain with a refcount of 1 forever, leaking the ordered extent structure and preventing the i_count of its inode from ever decreasing to 0, since the delayed iput is scheduled only when the ordered extent's refcount drops to 0, preventing the inode from ever being evicted by the VFS. Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to mean that an ordered extent is already being processed by an fsync call, which will attach it to the current transaction, preventing it from being collected by subsequent fsync operations against the same inode. This race was introduced with the following change (added in 3.19 and backported to stable 3.18 and 3.17): Btrfs: make sure logged extents complete in the current transaction V3 commit 50d9aa99bd35c77200e0e3dd7a72274f8304701f I ran into this issue while running xfstests/generic/113 in a loop, which failed about 1 out of 10 runs with the following warning in dmesg: [ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]() [ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo ppy e1000 scsi_mod [last unloaded: btrfs] [ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1 [ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8 [ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000 [ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068 [ 2612.463163] Call Trace: [ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65 [ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb [ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs] [ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c [ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs] [ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs] [ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs] [ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26 [ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs] [ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba [ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs] [ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef [ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e [ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs] [ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50 [ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43 [ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78 [ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14 [ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc [ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b [ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17 [ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]--- [ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day... Kmemleak confirmed the ordered extent leak (and btrfs inode specific structures such as delayed nodes): $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff880154290db0 (size 576): comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s) hex dump (first 32 bytes): 01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N.... 00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88014ef11db0 (size 576): comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s) hex dump (first 32 bytes): 02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800336feda8 (size 584): comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s) hex dump (first 32 bytes): 00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B.... 00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ backtrace: [<ffffffff8114eb34>] create_object+0x172/0x29a [<ffffffff8141d790>] kmemleak_alloc+0x25/0x41 [<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18 [<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198 [<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs] [<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs] [<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs] [<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47 [<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36 [<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs] [<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d [<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs] [<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e [<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff [<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12 [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06quota: Store maximum space limit in bytesJan Kara
commit b10a08194c2b615955dfab2300331a90ae9344c7 upstream. Currently maximum space limit quota format supports is in blocks however since we store space limits in bytes, this is somewhat confusing. So store the maximum limit in bytes as well. Also rename the field to match the new unit and related inode field to match the new naming scheme. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06x86, mm/ASLR: Fix stack randomization on 64-bit systemsHector Marco-Gisbert
commit 4e7c22d447bb6d7e37bfe39ff658486ae78e8d77 upstream. The issue is that the stack for processes is not properly randomized on 64 bit architectures due to an integer overflow. The affected function is randomize_stack_top() in file "fs/binfmt_elf.c": static unsigned long randomize_stack_top(unsigned long stack_top) { unsigned int random_variable = 0; if ((current->flags & PF_RANDOMIZE) && !(current->personality & ADDR_NO_RANDOMIZE)) { random_variable = get_random_int() & STACK_RND_MASK; random_variable <<= PAGE_SHIFT; } return PAGE_ALIGN(stack_top) + random_variable; return PAGE_ALIGN(stack_top) - random_variable; } Note that, it declares the "random_variable" variable as "unsigned int". Since the result of the shifting operation between STACK_RND_MASK (which is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64): random_variable <<= PAGE_SHIFT; then the two leftmost bits are dropped when storing the result in the "random_variable". This variable shall be at least 34 bits long to hold the (22+12) result. These two dropped bits have an impact on the entropy of process stack. Concretely, the total stack entropy is reduced by four: from 2^28 to 2^30 (One fourth of expected entropy). This patch restores back the entropy by correcting the types involved in the operations in the functions randomize_stack_top() and stack_maxrandom_size(). The successful fix can be tested with: $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done 7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0 [stack] 7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0 [stack] 7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0 [stack] 7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0 [stack] ... Once corrected, the leading bytes should be between 7ffc and 7fff, rather than always being 7fff. Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es> Signed-off-by: Ismael Ripoll <iripoll@upv.es> [ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: CVE-2015-1593 Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.net Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06Btrfs: fix fsync data loss after adding hard link to inodeFilipe Manana
commit 1a4bcf470c886b955adf36486f4c86f2441d85cb upstream. We have a scenario where after the fsync log replay we can lose file data that had been previously fsync'ed if we added an hard link for our inode and after that we sync'ed the fsync log (for example by fsync'ing some other file or directory). This is because when adding an hard link we updated the inode item in the log tree with an i_size value of 0. At that point the new inode item was in memory only and a subsequent fsync log replay would not make us lose the file data. However if after adding the hard link we sync the log tree to disk, by fsync'ing some other file or directory for example, we ended up losing the file data after log replay, because the inode item in the persisted log tree had an an i_size of zero. This is easy to reproduce, and the following excerpt from my test for xfstests shows this: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create one file with data and fsync it. # This made the btrfs fsync log persist the data and the inode metadata with # a correct inode->i_size (4096 bytes). $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 4K 0 4K" -c "fsync" \ $SCRATCH_MNT/foo | _filter_xfs_io # Now add one hard link to our file. This made the btrfs code update the fsync # log, in memory only, with an inode metadata having a size of 0. ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link # Now force persistence of the fsync log to disk, for example, by fsyncing some # other file. touch $SCRATCH_MNT/bar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar # Before a power loss or crash, we could read the 4Kb of data from our file as # expected. echo "File content before:" od -t x1 $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # After the fsync log replay, because the fsync log had a value of 0 for our # inode's i_size, we couldn't read anymore the 4Kb of data that we previously # wrote and fsync'ed. The size of the file became 0 after the fsync log replay. echo "File content after:" od -t x1 $SCRATCH_MNT/foo Another alternative test, that doesn't need to fsync an inode in the same transaction it was created, is: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our test file with some data. $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Make sure the file is durably persisted. sync # Append some data to our file, to increase its size. $XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Fsync the file, so from this point on if a crash/power failure happens, our # new data is guaranteed to be there next time the fs is mounted. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Add one hard link to our file. This made btrfs write into the in memory fsync # log a special inode with generation 0 and an i_size of 0 too. Note that this # didn't update the inode in the fsync log on disk. ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link # Now make sure the in memory fsync log is durably persisted. # Creating and fsync'ing another file will do it. touch $SCRATCH_MNT/bar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar # As expected, before the crash/power failure, we should be able to read the # 12Kb of file data. echo "File content before:" od -t x1 $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # After mounting the fs again, the fsync log was replayed. # The btrfs fsync log replay code didn't update the i_size of the persisted # inode because the inode item in the log had a special generation with a # value of 0 (and it couldn't know the correct i_size, since that inode item # had a 0 i_size too). This made the last 4Kb of file data inaccessible and # effectively lost. echo "File content after:" od -t x1 $SCRATCH_MNT/foo This isn't a new issue/regression. This problem has been around since the log tree code was added in 2008: Btrfs: Add a write ahead tree log to optimize synchronous operations (commit e02119d5a7b4396c5a872582fddc8bd6d305a70a) Test cases for xfstests follow soon. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06btrfs: fix leak of path in btrfs_find_itemDavid Sterba
commit 381cf6587f8a8a8e981bc0c1aaaa8859b51dc756 upstream. If btrfs_find_item is called with NULL path it allocates one locally but does not free it. Affected paths are inserting an orphan item for a file and for a subvol root. Move the path allocation to the callers. Fixes: 3f870c289900 ("btrfs: expand btrfs_find_item() to include find_orphan_item functionality") Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06btrfs: set proper message level for skinny metadataDavid Sterba
commit 5efa0490cc94aee06cd8d282683e22a8ce0a0026 upstream. This has been confusing people for too long, the message is really just informative. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06jffs2: fix handling of corrupted summary lengthChen Jie
commit 164c24063a3eadee11b46575c5482b2f1417be49 upstream. sm->offset maybe wrong but magic maybe right, the offset do not have CRC. Badness at c00c7580 [verbose debug info unavailable] NIP: c00c7580 LR: c00c718c CTR: 00000014 REGS: df07bb40 TRAP: 0700 Not tainted (2.6.34.13-WR4.3.0.0_standard) MSR: 00029000 <EE,ME,CE> CR: 22084f84 XER: 00000000 TASK = df84d6e0[908] 'mount' THREAD: df07a000 GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041 GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000 GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0 GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730 NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638 LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638 Call Trace: [df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable) [df07bc90] [c00c7708] __get_free_pages+0x20/0x48 [df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec [df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0 [df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4 [df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260 [df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184 [df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec [df07be20] [c033596c] get_sb_mtd+0x84/0x1e8 [df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c [df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8 [df07bea0] [c0103a58] do_kern_mount+0x40/0x100 [df07bec0] [c011fe90] do_mount+0x240/0x890 [df07bf10] [c0120570] sys_mount+0x90/0xd8 [df07bf40] [c00110d8] ret_from_syscall+0x0/0x4 === Exception: c01 at 0xff61a34 LR = 0x100135f0 Instruction dump: 38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28 3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001 mount: mounting /dev/mtdblock3 on /common failed: Input/output error Signed-off-by: Chen Jie <chenjie6@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: Fix quota type in quota structures when reusing quota fileJan Kara
commit dfcc70a8c868fe03276fa59864149708fb41930b upstream. For filesystems without separate project quota inode field in the superblock we just reuse project quota file for group quotas (and vice versa) if project quota file is allocated and we need group quota file. When we reuse the file, quota structures on disk suddenly have wrong type stored in d_flags though. Nobody really cares about this (although structure type reported to userspace was wrong as well) except that after commit 14bf61ffe6ac (quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units) assertion in xfs_qm_scall_getquota() started to trigger on xfs/106 test (apparently I was testing without XFS_DEBUG so I didn't notice when submitting the above commit). Fix the problem by properly resetting ddq->d_flags when running quotacheck for a quota file. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06udf: Check length of extended attributes and allocation descriptorsJan Kara
commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06udf: Remove repeated loads blocksizeJan Kara
commit 79144954278d4bb5989f8b903adcac7a20ff2a5a upstream. Store blocksize in a local variable in udf_fill_inode() since it is used a lot of times. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_argsTrond Myklebust
commit d8ba1f971497c19cf80da1ea5391a46a5f9fbd41 upstream. If the call to decode_rc_list() fails due to a memory allocation error, then we need to truncate the array size to ensure that we only call kfree() on those pointer that were allocated. Reported-by: David Ramos <daramos@stanford.edu> Fixes: 4aece6a19cf7f ("nfs41: cb_sequence xdr implementation") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06NFSv4: Ensure we reference the inode for return-on-close in delegreturnTrond Myklebust
commit ea7c38fef0b774a5dc16fb0ca5935f0ae8568176 upstream. If we have to do a return-on-close in the delegreturn code, then we must ensure that the inode and super block remain referenced. Cc: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06SUNRPC: NULL utsname dereference on NFS umount during namespace cleanupTrond Myklebust
commit 03a9a42a1a7e5b3e7919ddfacc1d1cc81882a955 upstream. Fix an Oopsable condition when nsm_mon_unmon is called as part of the namespace cleanup, which now apparently happens after the utsname has been freed. Link: http://lkml.kernel.org/r/20150125220604.090121ae@neptune.home Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06nfs41: .init_read and .init_write can be called with valid pg_lsegPeng Tao
commit cb5d04bc39e914124e811ea55f3034d2379a5f6c upstream. With pgio refactoring in v3.15, .init_read and .init_write can be called with valid pgio->pg_lseg. file layout was fixed at that time by commit c6194271f (pnfs: filelayout: support non page aligned layouts). But the generic helper still needs to be fixed. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06NFS: struct nfs_commit_info.lock must always point to inode->i_lockTrond Myklebust
commit f4086a3d789dbe18949862276d83b8f49fce6d2f upstream. Commit 411a99adffb4f (nfs: clear_request_commit while holding i_lock) assumes that the nfs_commit_info always points to the inode->i_lock. For historical reasons, that is not the case for O_DIRECT writes. Cc: Weston Andros Adamson <dros@primarydata.com> Fixes: 411a99adffb4f ("nfs: clear_request_commit while holding i_lock") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06nfs: don't call blocking operations while !TASK_RUNNINGJeff Layton
commit 6ffa30d3f734d4f6b478081dfc09592021028f90 upstream. Bruce reported seeing this warning pop when mounting using v4.1: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90 Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014 0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78 0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000 Call Trace: [<ffffffff8186ac78>] dump_stack+0x4c/0x65 [<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0 [<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70 [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90 [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90 [<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0 [<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430 [<ffffffff810d941e>] ? groups_alloc+0x3e/0x130 [<ffffffff810d941e>] groups_alloc+0x3e/0x130 [<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc] [<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc] [<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc] [<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc] [<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4] [<ffffffff810ff970>] ? wait_woken+0xc0/0xc0 [<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4] [<ffffffff810d45bf>] kthread+0x11f/0x140 [<ffffffff810ea815>] ? local_clock+0x15/0x30 [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250 [<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0 [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250 ---[ end trace 675220a11e30f4f2 ]--- nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE, which is just wrong. Fix that by finishing the wait immediately if we've found that the list has something on it. Also, we don't expect this kthread to accept signals, so we should be using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up hung task warnings from the watchdog, so have the schedule_timeout wake up every 60s if there's no callback activity. Reported-by: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06proc/pagemap: walk page tables under pte lockKonstantin Khlebnikov
commit 05fbf357d94152171bc50f8a369390f1f16efd89 upstream. Lockless access to pte in pagemap_pte_range() might race with page migration and trigger BUG_ON(!PageLocked()) in migration_entry_to_page(): CPU A (pagemap) CPU B (migration) lock_page() try_to_unmap(page, TTU_MIGRATION...) make_migration_entry() set_pte_at() <read *pte> pte_to_pagemap_entry() remove_migration_ptes() unlock_page() if(is_migration_entry()) migration_entry_to_page() BUG_ON(!PageLocked(page)) Also lockless read might be non-atomic if pte is larger than wordsize. Other pte walkers (smaps, numa_maps, clear_refs) already lock ptes. Fixes: 052fb0d635df ("proc: report file/anon bit in /proc/pid/pagemap") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: only trace buffer items if they existDave Chinner
commit e9892d3cc853afdda2cc69e2576d9ddb5fafad71 upstream. The commit 2d3d0c5 ("xfs: lobotomise xfs_trans_read_buf_map()") left a landmine in the tracing code: trace_xfs_trans_buf_read() is now call on all buffers that are read through this interface rather than just buffers in transactions. For buffers outside transaction context, bp->b_fspriv is null, and so the buf log item tracing functions cannot be called. This causes a NULL pointer dereference in the trace_xfs_trans_buf_read() function when tracing is turned on. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: set superblock buffer type correctlyDave Chinner
commit 3443a3bca54588f43286b725d8648d33a38c86f1 upstream. When the superblock is modified in a transaction, the commonly modified fields are not actually copied to the superblock buffer to avoid the buffer lock becoming a serialisation point. However, there are some other operations that modify the superblock fields within the transaction that don't directly log to the superblock but rely on the changes to be applied during the transaction commit (to minimise the buffer lock hold time). When we do this, we fail to mark the buffer log item as being a superblock buffer and that can lead to the buffer not being marked with the corect type in the log and hence causing recovery issues. Fix it by setting the type correctly, similar to xfs_mod_sb()... Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: set buf types when converting extent formatsDave Chinner
commit fe22d552b82d7cc7de1851233ae8bef579198637 upstream. Conversion from local to extent format does not set the buffer type correctly on the new extent buffer when a symlink data is moved out of line. Fix the symlink code and leave a comment in the generic bmap code reminding us that the format-specific data copy needs to set the destination buffer type appropriately. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: inode unlink does not set AGI buffer typeDave Chinner
commit f19b872b086711bb4b22c3a0f52f16aa920bcc61 upstream. This leads to log recovery throwing errors like: XFS (md0): Mounting V5 Filesystem XFS (md0): Starting recovery (logdev: internal) XFS (md0): Unknown buffer type 0! XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1 ffff8800ffc53800: 58 41 47 49 ..... Which is the AGI buffer magic number. Ensure that we set the type appropriately in both unlink list addition and removal. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06xfs: ensure buffer types are set correctlyDave Chinner
commit 0d612fb570b71ea2e49554a770cff4c489018b2c upstream. Jan Kara reported that log recovery was finding buffers with invalid types in them. This should not happen, and indicates a bug in the logging of buffers. To catch this, add asserts to the buffer formatting code to ensure that the buffer type is in range when the transaction is committed. We don't set a type on buffers being marked stale - they are not going to get replayed, the format item exists only for recovery to be able to prevent replay of the buffer, so the type does not matter. Hence that needs special casing here. Reported-by: Jan Kara <jack@suse.cz> Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06ext4: ignore journal checksum on remount; don't failEric Sandeen
commit 2d5b86e048780c5efa7f7d9708815555919e7b05 upstream. As of v3.18, ext4 started rejecting a remount which changes the journal_checksum option. Prior to that, it was simply ignored; the problem here is that if someone has this in their fstab for the root fs, now the box fails to boot properly, because remount of root with the new options will fail, and the box proceeds with a readonly root. I think it is a little nicer behavior to accept the option, but warn that it's being ignored, rather than failing the mount, but that might be a subjective matter... Reported-by: Cónräd <conradsand.arma@gmail.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-08Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds
Pull aio nested sleep annotation from Ben LaHaise, * git://git.kvack.org/~bcrl/aio-fixes: aio: annotate aio_read_event_ring for sleep patterns
2015-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "Forrest Liu tracked down a missing blk_finish_plug in the btrfs logging code. This isn't a new bug, and it's hard to hit. But, it's safe enough for inclusion now, and in my for-linus branch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: add missing blk_finish_plug in btrfs_sync_log()
2015-02-05nilfs2: fix deadlock of segment constructor over I_SYNC flagRyusuke Konishi
Nilfs2 eventually hangs in a stress test with fsstress program. This issue was caused by the following deadlock over I_SYNC flag between nilfs_segctor_thread() and writeback_sb_inodes(): nilfs_segctor_thread() nilfs_segctor_thread_construct() nilfs_segctor_unlock() nilfs_dispose_list() iput() iput_final() evict() inode_wait_for_writeback() * wait for I_SYNC flag writeback_sb_inodes() * set I_SYNC flag on inode->i_state __writeback_single_inode() do_writepages() nilfs_writepages() nilfs_construct_dsync_segment() nilfs_segctor_sync() * wait for completion of segment constructor inode_sync_complete() * clear I_SYNC flag after __writeback_single_inode() completed writeback_sb_inodes() calls do_writepages() for dirty inodes after setting I_SYNC flag on inode->i_state. do_writepages() in turn calls nilfs_writepages(), which can run segment constructor and wait for its completion. On the other hand, segment constructor calls iput(), which can call evict() and wait for the I_SYNC flag on inode_wait_for_writeback(). Since segment constructor doesn't know when I_SYNC will be set, it cannot know whether iput() will block or not unless inode->i_nlink has a non-zero count. We can prevent evict() from being called in iput() by implementing sop->drop_inode(), but it's not preferable to leave inodes with i_nlink == 0 for long periods because it even defers file truncation and inode deallocation. So, this instead resolves the deadlock by calling iput() asynchronously with a workqueue for inodes with i_nlink == 0. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-04Btrfs: add missing blk_finish_plug in btrfs_sync_log()Forrest Liu
Add missing blk_finish_plug in btrfs_sync_log() Signed-off-by: Forrest Liu <forrestl@synology.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-04Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Three small cifs fixes. One fixes a hang under stress, and the other two are security related" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix MUST SecurityFlags filtering Complete oplock break jobs before closing file handle cifs: use memzero_explicit to clear stack buffer
2015-02-03aio: annotate aio_read_event_ring for sleep patternsDave Chinner
Under CONFIG_DEBUG_ATOMIC_SLEEP=y, aio_read_event_ring() will throw warnings like the following due to being called from wait_event context: WARNING: CPU: 0 PID: 16006 at kernel/sched/core.c:7300 __might_sleep+0x7f/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810d85a3>] prepare_to_wait_event+0x63/0x110 Modules linked in: CPU: 0 PID: 16006 Comm: aio-dio-fcntl-r Not tainted 3.19.0-rc6-dgc+ #705 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffffffff821c0372 ffff88003c117cd8 ffffffff81daf2bd 000000000000d8d8 ffff88003c117d28 ffff88003c117d18 ffffffff8109beda ffff88003c117cf8 ffffffff821c115e 0000000000000061 0000000000000000 00007ffffe4aa300 Call Trace: [<ffffffff81daf2bd>] dump_stack+0x4c/0x65 [<ffffffff8109beda>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8109bf56>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110 [<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110 [<ffffffff810bdfcf>] __might_sleep+0x7f/0x90 [<ffffffff81db8344>] mutex_lock+0x24/0x45 [<ffffffff81216b7c>] aio_read_events+0x4c/0x290 [<ffffffff81216fac>] read_events+0x1ec/0x220 [<ffffffff810d8650>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff810fdb10>] ? hrtimer_get_res+0x50/0x50 [<ffffffff8121899d>] SyS_io_getevents+0x4d/0xb0 [<ffffffff81dba5a9>] system_call_fastpath+0x12/0x17 ---[ end trace bde69eaf655a4fea ]--- There is not actually a bug here, so annotate the code to tell the debug logic that everything is just fine and not to fire a false positive. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2015-01-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "We have one more fix for btrfs in my for-linus branch - this was a bug in the new raid5/6 scrubbing support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix raid56 scrub failed in xfstests btrfs/072
2015-01-30Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and UDF fix from Jan Kara: "A fix for UDF to properly free preallocated blocks and a fix for quota so that Q_GETQUOTA quotactl reports correct numbers for XFS filesystem (and similarly Q_XGETQUOTA quotactl works properly for other filesystems)" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units udf: Release preallocation on last writeable close
2015-01-29Merge tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable fix for a NFSv4.1 Oops on mount - Stable fix for an O_DIRECT deadlock condition - Fix an issue with submounted volumes and fake duplicate inode numbers" * tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix use of nfs_attr_use_mounted_on_fileid() NFSv4.1: Fix an Oops in nfs41_walk_client_list nfs: fix dio deadlock when O_DIRECT flag is flipped
2015-01-28quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space unitsJan Kara
Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-28udf: Release preallocation on last writeable closeJan Kara
Commit 6fb1ca92a640 "udf: Fix race between write(2) and close(2)" changed the condition when preallocation is released. The idea was that we don't want to release the preallocation for an inode on close when there are other writeable file descriptors for the inode. However the condition was written in the opposite way so we released preallocation only if there were other writeable file descriptors. Fix the problem by changing the condition properly. CC: stable@vger.kernel.org Fixes: 6fb1ca92a6409a9d5b0696447cd4997bc9aaf5a2 Reported-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-27btrfs: fix raid56 scrub failed in xfstests btrfs/072Gui Hecheng
The xfstests btrfs/072 reports uncorrectable read errors in dmesg, because scrub forgets to use commit_root for parity scrub routine and scrub attempts to scrub those extents items whose contents are not fully on disk. To fix it, we just add the @search_commit_root flag back. Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-01-26cifs: fix MUST SecurityFlags filteringNiklas Cassel
If CONFIG_CIFS_WEAK_PW_HASH is not set, CIFSSEC_MUST_LANMAN and CIFSSEC_MUST_PLNTXT is defined as 0. When setting new SecurityFlags without any MUST flags, your flags would be overwritten with CIFSSEC_MUST_LANMAN (0). Signed-off-by: Niklas Cassel <niklass@axis.com> Signed-off-by: Steve French <steve.french@primarydata.com>
2015-01-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes - deadlock in CIFS and build breakage in cris serial driver (resurfaced f_dentry in there)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Convert file->f_dentry->d_inode to file_inode() fix deadlock in cifs_ioctl_clone()
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 07:13:37 +0000